* Added support for cropping pictures in proxy camera
This includes extending the configuration to introduce a mode
(either 'resize', default, or 'crop') and further coordinates
for the crop operation.
* Also fixed async job type, following code review
* Remove FFmpeg input tests
* Not needed here
* Removing tests for removed functionality
* Minor lint
* Fix tests to reflect removed config option
* Remove async service registration by request
* More lint
* Unused imports
* Make it a non-breaking change
* Update ffmpeg.py
* Validate ports as port
Better than just a positive integer since it limits the range from 1 to 65535.
* Validate port for Axis
* Validate port for Xiaomi Home Camera
* Validate port for Modbus
* Validate port for Yamaha MusicCast Receivers
* Update zhong_hong.py
Validate port as a port, the gateway address as positive_int
Also moved the default values to their variable
* Validate port for the Asterisk Voicemail interface
* Fix lint
* Validate port for Xiaomi Cameras
* Updgrae blinkpy to 0.10.0
- Remove status sensor (API endpoint unreliable for this)
- Wifi strength reports in wifi bars rather than dBm (result of new API
endpoint)
- Added unique ids based on serial number
* Update requirements
* Using new methods for blink camera
- Refactored blink platform (breaking change)
- Camera needs to be uniquely enabled in config from now on
- Added motion detection enable/disable to camera platform
* Fix motion detection
- bumped blinkpy to 0.8.1
- Added wifi strength sensor
* Added platform schema to sensor
- Added global variables for brand and attribution to main platform
* Removed blink binary sensor
* Add alarm control panel
* Fixed dependency, added alarm_home
* Update requirements
* Fix lint errors
* Updated throttle times
* Add trigger_camera service (replaced snap_picture)
* Add refresh after camera trigger
* Update blinkpy version
* Wait for valid camera response before returning image
- Motion detection now working!
* Updated for new blinkpy 0.9.0
* Add refresh control and other fixes for new blinkpy release
* Add save video service
* Pushing to force bot to update
* Changed based on first review
- Pass blink as BLINK_DATA instead of DOMAIN
- Remove alarm_arm_home from alarm_control_panel
- Re-add discovery with schema for sensors/binar_sensors
- Change motion_detected to a binary_sensor
- Added camera_armed binary sensor
- Update camera device_state_attributes rather than state_attributes
* Moved blink.py to own folder. Added service hints.
* Updated coveragerc to reflect previous change
* Register services with DOMAIN
- Change device add for loop order in binary_sensor
* Fix lint error
* services.async_register -> services.register
* Added Logi Circle platform, camera and sensor
* Integrated with Logo Circle API’s feature detection to exclude sensors not supported by device. Added services for recording livestream and taking a snapshot from the livestream.
* Migrated livestream snapshot and recording functionality out of home assistant components and into the logi circle API wrapper. Added services.yaml entries for logi services.
* Added new Logi sensor types, updated to latest version of `logi_circle` and tidy up in preparation for pull request.
- Renamed `logi_set_mode` to `logi_set_config`.
- Live stream recording and snapshot methods now respect whitelisted path configuration.
- Added `streaming_mode` and `speaker_volume` sensors.
- Moved model-specific turn on/off logic to `logi_circle` library.
* Renamed `logi` component domain to `logi_circle`.
* Updates based on PR feedback
* Added timeout of 15s to logi_circle initial setup requests (login and grabbing cameras).
* Added unique ID (uses MAC address for camera platform, MAC address + sensor type for sensor platform).
* Added battery level and battery charging attributes to camera.
* Removed static attributes from device_state_attributes.
* Replaced STATE_UNKNOWN with None, replaced ‘on’ & ‘off’ with STATE_ON and STATE_OFF.
* Removed redundant SCAN_INTERVAL in sensor, removed redundant hass param from async_setup_platform in camera and sensor.
* Style tweaks.
* Replaced `asyncio.wait_for` with `async_timeout` to be consistent with other components.
* Migrating out the zoneminder platform (and camera.zoneminder) to a new library
* Clean up the global variable ZM usage
* Modify camera.zoneminder to use the new Monitor class implementation
* Refactor camera.zoneminder after latest refactor in zm-py
* Implementing changes to switch.zoneminder to use zm-py native methods
* Complete migrating over sensor.zoneminder to the zm-py library
* Tweaking ZoneMinder components from code review
* Linting fixes for the zoneminder components
* Directly assign value when turning on/off in switch.zoneminder
* Use access_token and user provided token instead of api_password
* address comments by @awarecan
* new tests
* add extra checks and test
* lint
* add comment
* First draft
* Generate device id
* No obscure registry
* Dont store config_entry_id in device
* Storage
* Small mistake on rebase
* Do storage more like entity registry
* Improve device identification
* Add tests
* Remove deconz device support from PR
* Fix hound comments, voff!
* Fix comments and clean up
* Fix proper indentation
* Fix pydoc issues
* Fix mochad component to not use self.device
* Fix mochad light platform to not use self.device
* Fix TankUtilitySensor to not use self.device
* Fix Soundtouch to not use self.device
* Fix Plex to not use self.device
* Fix Emby to not use self.device
* Fix Heatmiser to not use self.device
* Fix Wemo lights to not use self.device
* Fix Lifx to not use self.device
* Fix Radiotherm to not use self.device
* Fix Juicenet to not use self.device
* Fix Qwikswitch to not use self.device
* Fix Xiaomi miio to not use self.device
* Fix Nest to not use self.device
* Fix Tellduslive to not use self.device
* Fix Knx to not use self.device
* Clean up a small mistake in soundtouch
* Fix comment from Ballob
* Fix bad indentation
* Fix indentatin
* Lint
* Remove unused variable
* Lint
* Add turn_on/off to camera
* Add turn_on/off supported features to camera.
Add turn_on/off service implementation to camera, add turn_on/off
supported features and services to Demo camera.
* Add camera supported_features tests
* Resolve code review comment
* Fix unit test
* Use async_add_executor_job
* Address review comment, change DemoCamera to local push
* Rewrite tests/components/camera/test_demo
* raise HTTPError instead return response
* Added push camera
* add camera.push
* Address comments and add tests
* auff auff
* trip time made no sense
* travis lint
* Mock dependency
* hound
* long line
* long line
* better mocking
* remove blank image
* no more need to mock dependency
* remove import
* cleanup
* no longer needed
* unused constant
* address @pvizeli review
* add force_update
* Revert "add force_update"
This reverts commit e203785ea8.
* rename parameter
* Added support for Xiaofang Camera
* Added entry for Xiaofang 1080p camera
* Code fix
* Minor comment fix
* Updated coveragerc for Xiaomi cameras
* Added Xiaomi Camera
Added Xiaomi Camera to accommodate multiple models like Yi, Xiaofang, etc.
* Minor code fix
* Minor code fix
* Added model property
* Update xiaomi.py
* Minor code fix
* Update xiaomi.py
* Update xiaomi.py
* Minor code fix
* Package requirement fix due to Version conflict
* To fix conflicts
* Update package_constraints.txt
* Minor fix
* Update xiaomi.py
* Update xiaomi.py
Changes made per comment
* Update xiaomi.py
* Don't update on add.
* start arlo refactoring
* Refactored Arlo Hub to avoid uncessary and duplicated GETs to Arlo API
* Refactored Arlo camera component to avoid duplicate queries
* Added debug and error messages when video is not found
* Transformed Arlo Control Panel to Sync
* Makes linter happy
* Uses total_seconds() for scan_interval
* Added callback and fixed scan_interval issue
* Disable multiple tries and supported custom modes set in Arlo
* Bump PyArlo version to 0.1.4
* Makes lint happy
* Removed ArloHub object and added some tweaks
* Fixed hub_refresh method
* Makes lint happy
* Ajusted async syntax and added callbacks decorators
* Bump PyArlo version to 0.1.6 to include some enhacements
* Refined code
* fixed tests: using correct camera configuration now and error handling tests must be separated out to ensure that the setup_component call is actually executed
* better error handling during setup; raising PlatformNotReady in likely recoverable cases; added tests
* add familyhub.py camera
* fix import and REQUIREMENTS
* add to coveragerc
* fix formatting to make houndci-bot happy
* ran scripts/gen_requirements_all.py
* use CONF_IP_ADDRESS
* Revert "ran scripts/gen_requirements_all.py"
This reverts commit 3a38681d8a.
* fix library name
* add missing docstrings and enable polling
* Sort imports
* allow to set a desired update interval for camera_proxy_stream view
* lint
* refactor into a seperate method.
Keep the handle_async_mjpeg_stream method to be overridden by platforms
so they can keep proxying the direct streams from the camera
* change descriptions
* consolidate
* lint
* travis
* async/await and force min stream interval for fallback stream.
* guard clause. Let the method raise error on interval.
* is is not =
* what to except when you're excepting
* raise ValueError, remove unnecessary 500 response
* Enable autodiscovery for mqtt cameras, BREAKING CHANGE: homogenisation topic->state_topic
* fix line too long
* fix topic->state_topic in test
* image shall not be the state of entity
* Fix for not setting up the camera if it is offline during setup phase
* async/await and modified service creation
* Properly handle not supported PTZ
* setup platform made synchronous as ONVIFService constructors do I/O
* Fix intendation issue
* Add camera proxy
* Fix additional tox linting issues
* Trivial cleanup
* update to new async/await methods rather than decorators. Other minor fixes from code review
* Service PTZ added
* Removed description loading during setup
* Fixed hound issues
* Changed attribute names
* Fixed pylint error
* Cleaning up the code
* Changed access to protected member to dict
* Removed new line added by mistake
* Fixed pylint error
* Fixed minors
* Fixed pylint caused by usage of create_type function
* Code made more concise
* Fixed string intendation problem
* Service name changed
* Update code to fit with the new version
* Set ptz to None if PTZ setup failed
* more precise exception used
* Add support for August doorbell
* Address PR comment for August platform
* Address PR comment for August binary sensor
* Address PR comment for August camera
* Addressed PR comment for August lock
* - Fixed houndci-bot error
* - Updated configurator description
* - Fixed stale docstring
* Added august module to .coveragerc
Bugfixes for several issues with hass.io and non-venv installations
Added passing of credentials to RTSP stream
Changed from ONVIFService to ONVIFCamera as ONVIFService didn't contain
the same error handling.
Changed method to get Stream URL from camera to a more compatible method
Added extra Error handling
* Checked file path with is_allowed_path() for RPi Camera
* Used cv.isfile to verify file path instead of manual checks
* Changed default file path for RPiCamera to config_dir/image.jpg
* Used tempfiles for storing RPi Camera images, if no other path is defined
* Stopped checking for whitelisted paths on temporary files
* Upgrade pylint to 1.8.1
* Fix no-else-return
* Fix bad-whitespace
* Fix too-many-nested-blocks
* Fix raising-format-tuple
See https://github.com/PyCQA/pylint/blob/master/doc/whatsnew/1.8.rst
* Fix len-as-condition
* Fix logging-not-lazy
Not sure about that TEMP_CELSIUS though, but internally it's probably just like if you concatenated any other (variable) string
* Fix stop-iteration-return
* Fix useless-super-delegation
* Fix trailing-comma-tuple
Both of these seem to simply be bugs:
* Nest: The value of self._humidity never seems to be used anywhere
* Dovado: The called API method seems to expect a "normal" number
* Fix redefined-argument-from-local
* Fix consider-using-enumerate
* Fix wrong-import-order
* Fix arguments-differ
* Fix missed no-else-return
* Fix no-member and related
* Fix signatures-differ
* Revert "Upgrade pylint to 1.8.1"
This reverts commit af78aa00f125a7d34add97b9d50c14db48412211.
* Fix arguments-differ
* except for device_tracker
* Cleanup
* Fix test using positional argument
* Fix line too long
I forgot to run flake8 - shame on me... 🙃
* Fix bad-option-value for 1.6.5
* Fix arguments-differ for device_tracker
* Upgrade pylint to 1.8.2
* 👕 Fix missed no-member
* Added support for Canary live stream view
* Updated requirements
* - Fixed lint error
* Addressed PR comment
* - Disabled polling for Canary camera as suggested in PR comment
- Live session is now renewed every time camera is retrieved and min time between session renewal is 90 seconds
* Entity#unique_id defaults to None
* Initial commit entity registry
* Clean up unique_id property
* Lint
* Add tests to entity component
* Lint
* Restore some unique ids
* Spelling
* Remove use of IP address for unique ID
* Add tests
* Add tests
* Fix tests
* Add some docs
* Add one more test
* Fix new test…
* Improve foscam library exception support
Catches foscam exceptions that otherwise pollute the log. Many of these exception can safely be ignored
* Fixed line length
Fixed line length
* Changed exception and log handling
changed logging and catched only the TypeError effecting the library
* Removed unused var
Removed var
* Fix remaining issue
* Added support for enable/disable motion detection
* Changed name of variable for exception, lint error
* Moved motion_detection_enabled property to the other properties
* Lazy loading of service descriptions
* Fix tests
* Load YAML in executor
* Return a copy of available services to allow mutations
* Remove lint
* Add zha/services.yaml
* Only cache descriptions for known services
* Remove lint
* Remove description loading during service registration
* Remove description parameter from async_register
* Test async_get_all_descriptions
* Remove lint
* Fix typos from multi-edit
* Remove unused arguments
* Remove unused import os
* Remove unused import os, part 2
* Remove unneeded coroutine decorator
* Only use executor for loading files
* Cleanups suggested in review
* Increase test coverage
* Fix races in existing tests
* Allow disabling the DoorBird camera live view
* Support for push notifications from DoorBird devices
* use DoorBirdPy 0.1.1 instead of 0.1.0
* Fix lint errors in DoorBird binary sensor
* Change DoorBird push notifications from binary sensor to event
* Remove DoorBird camera options
* use DoorBirdPy 0.1.2 to fix history image urls
* clean up doorbird event code and remove unused doorbird camera imports
* use async for doorbird doorbell events
* Minor changes
* Update file header
* Fix my mess
* Fix docstring
* Add Canary component
* Made some change to how canary data is updated and stored
* Updated to use py-canary:0.1.2
* Addressed flake8 warnings
* Import canary API locally
* Import canary API locally again
* Addressed pylint errors
* Updated requirements_all.txt
* Fixed incorrect unit of measurement for air quality sensor
* Added tests for Canary component and sensors
* Updated canary component to handle exception better when initializing
* Fixed tests
* Fixed tests again
* Addressed review comments
* Fixed houndci error
* Addressed comment about camera force update
* Addressed comment regarding timeout when fetching camera image
* Updated to use py-canary==0.2.2
* Increased update frequency to 30 seconds
* Added support for Canary alarm control panel
* Address review comments
* Fixed houndci error
* Fixed lint errors
* Updated test to only test setup component / platform
* Fixed flake error
* Fixed failing test
* Uptake py-canary:0.2.3
* canary.alarm_control_panel DISARM is now mapped to canary PRIVACY mode
* Fixed failing tests
* Removed unnecessary methods
* Removed polling in canary camera component and update camera info when getting camera image
* Added more tests to cover Canary sensors
* Address review comments
* Addressed review comment in tests
* Fixed pylint errors
* Excluded canary alarm_control_panel and camera from coverage calculation
* Added ability to only load Ring camera
if the Ring Protect plan is activated.
* Fixed notification for all invalid cameras
* Fixed attribute name
* Using asyncio for persistent notifications
* Creates a AmcresHub object to protect some private attributes on the logs
* Uses hass.data to pass AmcrestHub to components
* Prefer constants
* Removed serializer since it's using hass.data and simplified camera entity constructor
* small cleanup
* Simplified URL expiration calculation and fixed refresh method
* Remove support from Ring from StickupCams or floodlight cameras
* Makes lint happy
* Removed unecessary attributes
* Async rewrite
* Device and events now working with async core
* More async than before
* Methods have moved
* Remove check if parameter serial number is available since library handles reconnection anyway and we can expect user to set up configuration correctly
* Async rewrite
* Device and events now working with async core
* More async than before
* Methods have moved
* Remove check if parameter serial number is available since library handles reconnection anyway and we can expect user to set up configuration correctly
* Serial number is the only unique identifier, checks are still needed
* No async for setup_device
* Bump axis to 13 in preparation of friday the 13th
* Fix review comments
* Removed async after some discussions with @armills.
It wasn't possible to get past that aiohttp doesnt support digest auth, which makes it impossible to convert the full library at this point in time.
* Extended Ring DoorBell to support camera playback and wifi sensors
* Bump python-ringdoorbell to version 0.1.6
* Support to camera playback via ffmpeg
* Extended ringdoorbell sensors to report WiFi attributes
* Extended unittests
* Makes lint happy
* Added support to stickup cameras and fixed logic
* Fixed unittests for stickup cameras
* Makes lint happy
* Refactored attributions and removed extra refresh method.
* New Skybell platform with components
* Added skybell components to omit.
* Preemptively fixing lint issues (hopefully).
* Removed unused variable.
* Requested changes.
* Additional CRs
* Hopefully the last of the CR's!
* - Rewrite synology camera by intruducing Api and SurveillanceStation classes to get cameras, motion settings, enable/disable motion detection, etc ...
- Synology camera now shows correct state based on is_recording and is_streaming flag. Also it now supports enable / disable motion detection and show the correct motion detection status
- Newly added Api and SurveillanceStation classes will be moved to a lib but it's here just for review
* - Updated how payload are merged with kwargs so it works with python <3.5
* - Fixed class name conflict
* - Addressed flake8 error
* - Addressed pylint error
* - Moved synology API related code to py-synology lib
- Added py-synology==0.1.1 requirement
- Removed hass from SynologyCamera constructor
* - Updated requirements_all.txt
* - renamed variable back to original
* - Sync call to retrieve camera image should be done in camera_image() instead
* - Sync call to update camera info should be done in update() instead
* - Removed unused import
* Bump Axis requirement to v10
Fix issues related to non JSON serializable items and recorder component (8297)
Add support to configure HTTP port (8403)
* Changed local port definition to CONF_PORT
* On request config is now sent to the camera platform as well, and in order better explain what is what the old internal config is now device_config and hass own config is the only one referenced as config
* Missed to add device_config to setup in discovered device
* Bump to V12 that has got a dependency fix
* Update requirements_all
* Add port configuration to automatically discovered devices
Allow setup to pass without Axis being configured in configuration.yaml
* Updated to latest AbodePy version. Added services and events. Added new device types. Added exclude, light, and polling config options.
* Disable the event service if polling is enabled.
* Addressed all CR's
* Removed duplicated super call.
* Name config option now used. Removed deprecated DEFAULT_NAME.
* Modified partial to move event to first param.
* Added support to enable/disable motion detection for foscam cameras. This support was added in 0.48.1 as a generic service for cameras. Motion detection can be enabled/disabled for foscam cameras with this code-set.
* Fixed the violation identified by hound-bot
* Fixed the comment posted by HoundCI-Bot regarding using imperative mood statement for pydocstyle
* Fixed the error that travis-ci bot found.
* As per comment from @balloob, Instead of directly using the URL to talk to foscam, used a 3rd party foscam library to communicate with it. This library already has support to enable/disable motion detection and also APIs to change the motion detection schedule etc. Need to add more support in the pyfoscam 3rd party library for checking if motion was detected or even if sound was detected. Once that is done, we can add that into HASS as well.
* Lint
* Removed the requests library import which is not used anymore
* Updating requirements_all.txt based on the code-base of home assistant that i have. Generated using the gen_requirements_all.py script
* Updating requirements_all.txt and requirements_test_all.txt generated by gen_requirements_all.py after latest pull from origin/dev
* Updated requirements_all.txt with script
* Updated the foscam camera code to fix lint errors
* Fixed houndci violation
* Updating the foscam library dependency/requirements.
* Fixing the requirements_all file. Somehow when i generated, it generated duplicate entry for the same dependency
While waiting for a new pyfoscam release, we can fix this for users
just by changing the import. Foscam devices a pretty widely deployed,
so a regression here is definitely no fun.
Fixes Bug #8940
* Inital USPS Camera expansion
* Cleanup debugging, add camera change interval
* Change to local nomail image
* Explicitly pass in date
* Move camera date info to model property
* Fix copy typo
* Fix hound line-length
* Fix lint whitespace
* Fix requirements
* Bump myusps version, clarify interval, alter update scheme
* Add units
* Code cleanup, address comments
* Use built-in scan interval, remove nomail image
* Remove logging line
* Added support to enable/disable motion detection for foscam cameras. This support was added in 0.48.1 as a generic service for cameras. Motion detection can be enabled/disabled for foscam cameras with this code-set.
* Fixed the violation identified by hound-bot
* Fixed the comment posted by HoundCI-Bot regarding using imperative mood statement for pydocstyle
* Fixed the error that travis-ci bot found.
* As per comment from @balloob, Instead of directly using the URL to talk to foscam, used a 3rd party foscam library to communicate with it. This library already has support to enable/disable motion detection and also APIs to change the motion detection schedule etc. Need to add more support in the pyfoscam 3rd party library for checking if motion was detected or even if sound was detected. Once that is done, we can add that into HASS as well.
* Lint
* Removed the requests library import which is not used anymore
* Updating requirements_all.txt based on the code-base of home assistant that i have. Generated using the gen_requirements_all.py script
* Updating requirements_all.txt and requirements_test_all.txt generated by gen_requirements_all.py after latest pull from origin/dev
* Updated requirements_all.txt with script
* Updated the foscam camera code to fix lint errors
* Fixed houndci violation
* This change will enable the functionality for Arlo Q cameras. When we added the code to enable/disable motion detection, we assumed that base station will be present for all arlo type of cameras. But found recently that Arlo Q cameras does not have base station. So, removed the base_station dependency in the init code. Also added code in enable/disable motion detection code to first check if base station is detected by library. If base station is detected then it will use it to enable the motion detection. If not detected, even if service was called, it will not do anything. Enabling/disabling the motion detection for Arlo Q cameras have to added by someone who has that camera. I don't have the Arlo Q cameras.
* Fixed a typo in the code.
* Refactored Amcrest to use central hub component
* Set default streaming source to snapshot
* Simplified code by using discovery platforms
* Makes lint happy
* Update authentication method to basic
* Fixed lint issues
* Makes Amcrest hub async
* Make Amcrest hub IO synchronous and disabled ffmpeg dependency on sensor/amcrest.
* Removed async to load component
* Organized import order
* Update amcrest.py
* Added camera service calls to arm/disarm the cameras. Entity id is optional so that with a single call we can arm all the cameras or specify a particular entity id to arm if applicable and possible in that camera type.
* Added camera service calls to arm/disarm the cameras. Entity id is optional so that with a single call we can arm all the cameras or specify a particular entity id to arm if applicable and possible in that camera type.
* Added camera service calls to arm/disarm the cameras. Entity id is optional so that with a single call we can arm all the cameras or specify a particular entity id to arm if applicable and possible in that camera type.
* Fixed the spaces and indentation related issues that houndci found
* Fixed the spaces and indentation related issues that houndci found
* Missed the const file which has the macros defined.
* Fixed the CI build error
* Fixed the CI build error because of unused variable in exception case
* Updating the arlo code based on comment from @balloob. Changed the arm and disarm to enable_motion_detection and disable_motion_detection respectively. Similarly fixed the AttributeError handling. Added dummy code to the demo camera also. Moved out the definitions in const.py into the camera __init__ file
* Fixed the comments posted by houndci-bot
* Fixed the comments posted by houndci-bot
* Fixed the comments posted by houndci-bot
* Fixed the comments posted by travis-ci integration bot
* Fixed the comments posted by travis-ci integration bot
* Fixed the comments posted by travis-ci integration bot for demo.py: expected 2 lines, found 1
* Updated code in camera __init__.py to use the get function instead of directly calling the member in the structure.
* Updated code in camera __init__.py
* Posting the updated code for PR based on @balloob's suggestions/recommendations
* Removed the arlo reference from demo code. Copy-paste error
* Removed the unused import found by hound bot
* Expected 2 lines before function, but found only 1.
* Based on @balloob's comments, moved these constants to the camera/arlo.py
* Added test_demo.py to test the motion enabled and motion disabled in camera component
* Fixing issues found by houndci-bot
* Fixing issues found by houndci-bot
* Fixing the code as per @balloob's suggestions
* Fixing the code as per @balloob's suggestions
* Fixing the test_demo failure. Tried to rewrite a base function to enable the motion in __init__.py and missed to add it to as a job.
* Fixing the hound bot comment
* Update arlo.py
* Update arlo.py
* Initial commit for an Axis service to do Vapix calls to device
* Added check to see if metadatastream initiated properly
* Make sure to configure the correct IP address when setting up registered devices on system start
* Manage reconnection when device is discovered with a different IP
* Cleaned up setting new IP
* Better naming of event for new IP
* New version of dependency axis
* Fix flake8 failing
* Break out service default strings to constants
* Use the dispatcher and not the core event bus for internal communication
* Introduced support to Netgear Arlo Cameras
* Using async_setup_platform() and applied other changes
* Removed unecessary variables
* Using asyncio for sensor/arlo
* Update arlo.py
* Removed entity_namespace
* Remove setting up an hbmqtt broker
* Don't pass loop to web.Application in tests
* Use .query instead of deprecated .GET for aiohttp requests
* Fix closing file resource
* Do not use asyncio mark
* Notify.html5 - PyJWT: Use options to disable verify
* Yamaha: Test was still using deprecated ip
* Remove pytest-asyncio
* Implemented ffmpeg option on Amcrest camera and upgraded to version 1.2.0
* Added ffmpeg arguments and binary options to Amcrest camera
* Added ffmpeg as dependencies
* Makes lint happy and fixed requirements_all.txt
* Inherent the ffmpeg.binary configuration from ffmpeg component
* Update amcrest.py
* Added Axis hub, binary sensors and camera
* Added Axis logo to static images
* Added Axis logo to configurator
Added Axis mdns discovery
* Fixed flake8 and pylint comments
* Missed a change from list to function call
V5 of axis py
* Added dependencies to requirements_all.txt
* Clean up
* Added files to coveragerc
* Guide lines says to import function when needed, this makes Tox pass
* Removed storing hass in config until at the end where I send it to axisdevice
* Don't call update in the constructor
* Don't keep hass private
* Unnecessary lint ignore, following Baloobs suggestion of using NotImplementedError
* Axis package not in pypi yet
* Do not catch bare excepts. Device schema validations raise vol.Invalid.
* setup_device still adds hass object to the config, so the need to remove it prior to writing config file still remains
* Don't expect axis.conf contains correct values
* Improved configuration validation
* Trigger time better explains functionality than scan interval
* Forgot to remove this earlier
* Guideline says double qoutes for sentences
* Return false from discovery if config file contains bad data
* Keys in AXIS_DEVICES are serialnumber
* Ordered imports in alphabetical order
* Moved requirement to pypi
* Moved update callback that handles trigger time to axis binary sensor
* Renamed configurator instance to request_id since that is what it really is
* Removed unnecessary configurator steps
* Changed link in configurator to platform documentation
* Add not-context-manager (#7523)
* Add not-context-manager
* Add missing comma
* Threadsafe configurator (#7536)
* Make Configurator thread safe, get_instance timing issues breaking configurator working on multiple devices
* No blank lines allowed after function docstring
* Fix comment Tox
* Added Axis hub, binary sensors and camera
* Added Axis logo to static images
* Added Axis logo to configurator
Added Axis mdns discovery
* Fixed flake8 and pylint comments
* Missed a change from list to function call
V5 of axis py
* Added dependencies to requirements_all.txt
* Clean up
* Added files to coveragerc
* Guide lines says to import function when needed, this makes Tox pass
* Removed storing hass in config until at the end where I send it to axisdevice
* Don't call update in the constructor
* Don't keep hass private
* Unnecessary lint ignore, following Baloobs suggestion of using NotImplementedError
* Axis package not in pypi yet
* Do not catch bare excepts. Device schema validations raise vol.Invalid.
* setup_device still adds hass object to the config, so the need to remove it prior to writing config file still remains
* Don't expect axis.conf contains correct values
* Improved configuration validation
* Trigger time better explains functionality than scan interval
* Forgot to remove this earlier
* Guideline says double qoutes for sentences
* Return false from discovery if config file contains bad data
* Keys in AXIS_DEVICES are serialnumber
* Ordered imports in alphabetical order
* Moved requirement to pypi
* Moved update callback that handles trigger time to axis binary sensor
* Renamed configurator instance to request_id since that is what it really is
* Removed unnecessary configurator steps
* Changed link in configurator to platform documentation
* No blank lines allowed after function docstring
* No blank lines allowed after function docstring
* Changed discovery to use axis instead of axis_mdns
* Travis CI requested rerun of script/gen_requirements_all.py
* Add condition for API failure
If you are not running the latest ve3rsion of ZM this will cause exceptions to fire. This fix handles a response from ZM but a non successful attempt.
This resolves the issue https://github.com/home-assistant/home-assistant/issues/7178
* Fixed houndci-bot issues
* Responsiveness
* Delay was not needed as commands does not return until done.
* Add support for cleaning maps and cleaning data
* Hound
* Docstring
* Update requirements
* Review changes
* External lib now returns the raw data.
* debug
* Sensor did not refresh
* Error handling
* Issue warning on connection error
* Update requirements
* Review changes
* Adding exception handling when fetching the camera image to avoid python errors when host is not reachable or any url errors to camera
* Added exception as ConnectionError instead of plain except
* Added exception as ConnectionError instead of plain except. Removed the unused error handle
Sriram Vaidyanathan
Mike Miller
Fabian Affolter
Rohan Kapoor
Ioan Loosley
Nick Horvath
Paulus Schoutsen
Kevin Fronczak
Carlos Gustavo Sarmiento
Diogo Gomes
Pascal Vizeli
Giuseppe
nragon
jjlawren
Jason Hu
Jorim Tielemans
Daniel Shokouhi
Thomas Lovén
cdce8p
Charles Garwood
Otto Winter
Maciej Bieniek
Evan Bruhn
PhracturedBlue
Robert Svensson
Ville Skyttä
Flip Hess
Paulus Schoutsen
Aaron Bach
Andrey
Marcelo Moreira de Mello
Matt Snyder
Malte Franken
Hugo Dupras
Sebastian Muszynski
Gregory Benner
Abílio Costa
NovapaX
Robin
jmtatsch
Jerad Meisner
karlkar
Joe Lu
Matthias Urlichs
Michael Pusterhofer
Sergio Viudes
Matthew Hilton
Frederik Bolding
Otto Winter
Emil Stjerneman
i-am-shodan
Andreas Björshammar
Anders Melchiorsen
Dan Nixon
Andy Castille
Guillaume Rischard
Jeremy Williams
Alok Saboo
Mister Wil
Michael Prokop
happyleavesaoc
Antony Messerli
viswa-swami
Sean Dague
John Mihalic
Per Sandström
Eugenio Panadero
Ole-Kenneth
Matt N
Nuno Sousa
Brent Hughes
Sytone
Gianluca Barbaro
John Arild Berentsen