* Subscribe to Withings webhooks outside of coordinator
* Subscribe to Withings webhooks outside of coordinator
* Update homeassistant/components/withings/__init__.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/withings/__init__.py
Co-authored-by: J. Nick Koston <nick@koston.org>
---------
Co-authored-by: J. Nick Koston <nick@koston.org>
* Bump pyOverkiz and migrate entries
* Add comment
* Remove entities when duplicate
* Remove old entity
* Remove old entities
* Add example of entity migration
* Add support of UIWidget and UIClass
* Add tests for migrations
* Apply feedback (1)
* Apply feedback (2)
* Rework on Google Assistant doorbell event
* Additional comment on syncing notificatiions
* Update homeassistant/components/google_assistant/trait.py
* Only sync event if state attr changed
* Update comment
* Add circular mean
Add support for circular mean for sensors in units of degrees, e.g. direction data.
* Update test_sensor.py
* Update sensor.py
* Remove whitespace
* Revert to degC
* Fix: shift atan2 output to positive degrees
* Add new dedicated test
* Simplify test
* Modify test to account for scenario of unknown unsupported attributes
* Add error checking for finding unsupported attributes
* Change comment to clarify zigpy misses an attribute def
This should make it more clear that it's about an unknown attribute (where zigpy doesn't have an attribute definition).
* Increase test coverage
This increases test coverage by doing the following:
- adding the `IasZone` to our test device, so we have a cluster which actually has some attribute definitions
- adding not just an unknown unsupported attribute by id, but also by name
- adding a known unsupported attribute by id and by name
* Fix diagnostics logic
* Update device info for gen2 sleeping devices
* Add test
* Update sw_version only if the firmware_version value has changed
* Rename device_update_info() to update_device_fw_info()
* Remove duplicate comparison
* Fix data entry flow with multiple steps
* Update a test
* Update description and add a show progress change test
---------
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Support secret_token for setWebHook api
* Revert configuration YAML changes; generate and store secret token instead
* Reformat codes
* Revert storage of secret token; use ephemeral secret token instead
* Reformat
* Update homeassistant/components/telegram_bot/webhooks.py
* Fix when header is not present
* Check for non-empty token
* Fix tests to support secret token
* Add tests for invalid secret token
* Minor: remove comment
* Revert back to 401
* ... and for tests
* Change patching method for the generation of secret tokens
---------
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Add reauth support in fitbit
* Update tests/components/fitbit/test_config_flow.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Improve http status error code handling
---------
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add weatherkit sensor platform and tests
* Make unique ID assignment more explicit
* Fix missing argument
* Use const for top-level API response keys
* Address code review feedback
* Fix unique ids for rainbird entities
* Update entity unique id use based on config entry entity id
* Update tests/components/rainbird/test_binary_sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Rename all entity_registry variables
* Shorten long comment under line length limits
---------
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Cleanup fitbit sensor API parsing
* Remove API code that is not used yet
* Configuration flow for fitbit
* Code cleanup after manual review
* Streamline code for review
* Use scopes to determine which entities to enable
* Use set for entity comparisons
* Apply fitbit string pr feedback
* Improve fitbit configuration flow error handling
* Apply suggestions from code review
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* Fix typo in more places
* Revert typing import
* Revert custom domain back to default
* Add additional config flow tests
* Add breaks_in_ha_version to repair issues
* Update homeassistant/components/fitbit/api.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Increase test coverage for token refresh success case
* Add breaks_in_ha_version for sensor issue
* Apply suggestions from code review
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Simplify translations, issue keys, and token refresh
* Config flow test improvements
* Simplify repair issue creation on fitbit import
* Remove unused strings
---------
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Bump plexapi to 4.15.3
* Update tests for updated account endpoint
* Update tests for updated resources endpoint
* Switch to non-web client fixture
* Set __qualname__ attribute for new library behavior
* Add LED control support to Home Assistant Green
* Add strings.json
* Sort alphabetically
* Reorder LED schema
* Improve test coverage
* Apply suggestions from code review
Co-authored-by: Stefan Agner <stefan@agner.ch>
* Sort + fix test
* Remove reboot menu
---------
Co-authored-by: Stefan Agner <stefan@agner.ch>
* add support for shutter_tilt for Fibaro FGR 223
add tests for fgr 223
* Adjust comments and docstring
---------
Co-authored-by: Lennart <18117505+Ced4@users.noreply.github.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Fix _async_component_dependencies
Fix bug with circular dependency detection
Fix bug with circular after_dependency detection
Simplify interface and make the code more readable
* Implement review feedback
* Pass all conflicting deps to Exception
* Change inner docstring
Co-authored-by: Erik Montnemery <erik@montnemery.com>
---------
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* merge upstream
* Update homeassistant/components/weatherflow/__init__.py
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* feat: Removing unused keys
* feat: Addressing PR to remove DEFAULT_HOST from init
* feat: Addressing PR abort case
* feat: Ensure there is a default host always
* feat: Addressing PR comments and fixing entity names via local testing
* feat: Tested units
* feat: updated variable names to hopefully add some clarity to the function
* feat: added more var names for clarity
* feat: Fixed abort
* Update homeassistant/components/weatherflow/__init__.py
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* feat: Removed an unnecessary line
* feat: Test updates
* feat: Removed unreachable code
* feat: Tons of improvements
* removed debug code
* feat: small tweaks
* feat: Fixed density into HA Compatibility
* feat: Handled the options incorrectly... now fixed
* feat: Handled the options incorrectly... now fixed
* Update homeassistant/components/weatherflow/manifest.json
Co-authored-by: J. Nick Koston <nick@koston.org>
* Cleaned up callback in __init__
Cleaning up config_flow as well
* feat: Cleaned up a stupid test
* feat: Simulating a timeout event
* feat: Triggering timeout in mocking
* feat: trying to pass tests
* refactor: Moved code around so easier to test
* Update homeassistant/components/weatherflow/__init__.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* feat: Incremental changes moving along well
* feat: Last fix before re-review
* feat: Hopefully the tests shall pass
* feat: Remove domian from unique id
* feat: Fixed entity name
* feat: Removed unneeded lambda - to make thread safe
* Working version...
* working
* working
* feat: Remove tuff
* feat: Removed dual call
* Update homeassistant/components/weatherflow/sensor.py
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* Update homeassistant/components/weatherflow/strings.json
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* feat: updates based on pr
* feat: removed some self refrences
* feat: Mod RSSI
* feat: Removed the custom Air Density (will add in a later PR)
* feat: Significant cleanup of config flow
* feat: Reworked the configflwo with the help of Joostlek
* feat: Updated test coverage
* feat: Removing bakcing lib attribute
* Update homeassistant/components/weatherflow/sensor.py
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* Update homeassistant/components/weatherflow/sensor.py
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* Update homeassistant/components/weatherflow/sensor.py
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* Update homeassistant/components/weatherflow/sensor.py
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* Update homeassistant/components/weatherflow/sensor.py
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* feat: Updated translations
* feat: Renamed CUSTOM to VOC
* feat: Extreme simplification of config flow
* feat: Pushing incremental changes
* feat: Fixing test coverage
* feat: Added lambda expressions for attributes and removed the custom AirDensity sensor
* Update homeassistant/components/weatherflow/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/weatherflow/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* feat: Removed default lambda expression from raw_data_conv_fn
* feat: Added back default variable for lambda
* feat: Updated tests accordingly
* feat: Updated tests
* made sure to patch correct import
* made sure to patch correct import
* feat: Fixed up tests ... added missing asserts
* feat: Dropped model
* Update homeassistant/components/weatherflow/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Refactor: Updated code
* refactor: Removed commented code
* feat: close out all tests
* feat: Fixing the patch
* feat: Removed a bunch of stuff
* feat: Cleaning up tests even more
* fixed patch and paramaterized a test
* feat: Addressing most recent comments
* updates help of joostlek
* feat: Updated coverage for const
* Update homeassistant/components/weatherflow/strings.json
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* Update homeassistant/components/weatherflow/strings.json
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* Update homeassistant/components/weatherflow/strings.json
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* Update homeassistant/components/weatherflow/strings.json
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* Update homeassistant/components/weatherflow/strings.json
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* Update homeassistant/components/weatherflow/sensor.py
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* Update homeassistant/components/weatherflow/sensor.py
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* Update homeassistant/components/weatherflow/strings.json
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* Update homeassistant/components/weatherflow/sensor.py
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* feat: Addressing more PR issues... probably still a few remain
* using const logger
* Update homeassistant/components/weatherflow/strings.json
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
---------
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
Co-authored-by: J. Nick Koston <nick@koston.org>
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* Bump zwave-js-server-python to 0.52.0
* Add WS command to enabled zwave_js server logging in lib
* enable and disable server logging automatically
* fix conditionals
* fix tests
* Add logging
* small tweaks
* Add logger as a dependency
* fix test
* Prepare for movement of event constant
* Add constant so tests pass
* feat(knxproject-explore): providing knxproject via websocket, also xknxproject version in info mesage
* feat(knxproject-explore): adding test case
* reverted back adding of xknxproject version
* fix(): Enriching get project test case to check against FIXTURE
* feat(knxproject-explore): providing knxproject via websocket, also xknxproject version in info mesage
* feat(knxproject-explore): adding test case
* reverted back adding of xknxproject version
* fix(): Enriching get project test case to check against FIXTURE
* Initial version of a calendar for the rainbird integration
* Improve calendar support
* Revert changes to test fixtures
* Address ruff error
* Fix background task scheduling
* Use pytest.mark.freezetime to move to test setup
* Address PR feedback
* Make refresh a member
* Merge rainbird and calendar changes
* Increase test coverage
* Readability improvements
* Simplify timezone handling
* Use webrtc-noise-gain instead of webrtcvad package
* Switching to ProcessedAudioChunk
* Refactor VAD and fix tests
* Add vad no chunking test
* Add test that runs audio enhancements
* First attempt async_report_state_all
* Move notificationSupportedByAgent to SYNC response
* Make notificationSupportedByAgent conditional
* Add generic sync_options method
* Report event
* Add event_type as ID
* User UUID, imlement query_notifications
* Refactor query_notifications
* Add test
* MyPy
* Unreachable code
* Tweak
* Correct notification message
* Timestamp was wrong unit, it should be in seconds
* Can only allow doorbell class, since it's the only type
* Fix test
* Remove unrelated changes - improve coverage
* Additional tests
---------
Co-authored-by: Joakim Plate <elupus@ecce.se>
* Move child related stuff to MySensorsChildEntity
* Dispatch signal for newly discovered MySensors node
* Create battery entity for each MySensors node
* Removed ATTR_BATTERY_LEVEL attribute from each node sensor
Attribute is redundant with newly introduced battery sensor entity
* Apply suggestions from code review
---------
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Merge branch 'dev' into workday_without_country
* ruff
* remove province check
* Remove not needed test
* Mod config flow
---------
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* Add config flow to Hydrawise
* Raise an issue when a YAML config is detected
* Add a test for YAML import
* Add missing __init__.py
* Update CODEOWNERS
* Update requirements_test_all.txt
* Add config flow data to strings.json
* Hande scan_interval not being in YAML on import
* Fix requirements
* Update deprecation dates
* Update requirements_test_all.txt
* Changes from review
* Update homeassistant/components/hydrawise/__init__.py
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* Add already_configured to strings.json
* Add back setup_platform functions
* Apply suggestions from code review
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* Add back setup_platform
* Update requirements_test_all.txt
* Run black on hydrawise/*.py
* Add missing import of HOMEASSISTANT_DOMAIN
* Use more specific errors in config flow
* Add additional tests
* Update config flow to use pydrawise.legacy
* Re-work YAML deprecation issues
* Revert some changes to binary_sensor, as requested in review
* Changes requested during review
* Apply suggestions from code review
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* Remove unused STE_USER_DATA_SCHEMA
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* Update comment in setup_platform
* Re-work the config flow again
* Apply suggestions from code review
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* Update tests
* Add back the _default_watering_timer attribute
* Bump deprecation dates
* Update requirements_test_all.txt
* Update CODEOWNERS
---------
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* Don't set a unique id for devices with no serial
* Add additional check for the same config entry host/port when there is no serial
* Update homeassistant/components/rainbird/config_flow.py
Co-authored-by: Robert Resch <robert@resch.dev>
* Update tests/components/rainbird/test_config_flow.py
Co-authored-by: Robert Resch <robert@resch.dev>
* Update tests/components/rainbird/test_config_flow.py
Co-authored-by: Robert Resch <robert@resch.dev>
---------
Co-authored-by: Robert Resch <robert@resch.dev>
* Add ecoforest integration
* fix file title
* remove host default from schema, hints will be given in the documentation
* moved input validation to async_step_user
* ensure we can receive device data while doing entry setup
* remove unecessary check before unique id is set
* added shorter syntax for async create entry
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* use variable to set unique id
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* Use _attr_has_entity_name from base entity
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* remove unecessary comments in coordinator
* use shorthand for device information
* remove empty objects from manifest
* remove unecessary flag
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* use _async_abort_entries_match to ensure device is not duplicated
* remove unecessary host attr
* fixed coordinator host attr to be used by entities to identify device
* remove unecessary assert
* use default device class temperature trasnlation key
* reuse base entity description
* use device serial number as identifier
* remove unused code
* Improve logging message
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* Remove unused errors
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* Raise a generic update failed
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* use coordinator directly
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* No need to check for serial number
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* rename variable
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* use renamed variable
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* improve assertion
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* use serial number in entity unique id
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* raise config entry not ready on setup when error in connection
* improve test readability
* Improve python syntax
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* abort when device already configured with same serial number
* improve tests
* fix test name
* use coordinator data
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* improve asserts
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* fix ci
* improve error handling
---------
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* Only call `async_ha_write_state` on changes.
* Make helper class
* Use UndefinedType
* Remove del
* Integrate monitor into MqttEntity
* Track extra state attributes and availability
* Add `__slots__`
* Add monitor to MqttAttributes and MqttAvailability
* Write out loop
* Add test
* Make common test and parameterize
* Add test for last_reset attribute
* MqttMonitorEntity base class
* Rename attr and update docstr `track` method.
* correction doct
* Implement as a decorator
* Move tracking functions into decorator
* Rename decorator
* Follow up comment
```
$ python3 -q
>>> import datetime, time
>>> time.tzname
('EET', 'EEST')
>>> datetime.datetime.max.timestamp()
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ValueError: year 10000 is out of range
```
* Add event platform for gen2 devices
* Add tests
* Add removal condition
* Simplify RpcEventDescription; fix availability
* Improve names and docstrings
* Improve the event entity name
* Use async_on_remove()
* Improve tests coverage
* Improve tests coverage
* Prefix the entity name with the device name in the old way
* Black
* Use DeviceInfo object
* Switches via API
* Using external library
* UT and checlist
* Updating file .coveragerc
* Update homeassistant/components/switchbot_via_api/switch.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/switchbot_via_api/switch.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/switchbot_via_api/switch.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Review fixes
* Apply suggestions from code review
Co-authored-by: J. Nick Koston <nick@koston.org>
* This base class shouldn't know about Remote
* Fixing suggestion
* Sometimes, the state from the API is not updated immediately
* Review changes
* Some review changes
* Review changes
* Review change: Adding type on commands
* Parameterizing some tests
* Review changes
* Updating .coveragerc
* Fixing error handling in coordinator
* Review changes
* Review changes
* Adding switchbot brand
* Apply suggestions from code review
Co-authored-by: J. Nick Koston <nick@koston.org>
* Review changes
* Adding strict typing
* Removing log in constructor
---------
Co-authored-by: J. Nick Koston <nick@koston.org>
* Late review for honeywell
* Actually test same id different domain
* Update homeassistant/components/honeywell/climate.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update climate.py
* Refactor dont_remove
---------
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Avoid probing ipp printers for unique_id when it is available via mdns
We would always probe the device in the ipp flow and than
abort if it was already configured. We avoid the probe for
most printers.
* dry
* coverage
* fix test
* add test for updating host
* Cache device triggers on startup
* reorg zha init
* don't reuse gateway
* don't nuke yaml configuration
* review comments
* Add unit tests
* Do not cache device and entity registries
* [WIP] Wrap ZHA data in a dataclass
* [WIP] Get unit tests passing
* Use a helper function for getting the gateway object to fix annotations
* Remove `bridge_id`
* Fix typing issues with entity references in group websocket info
* Use `Platform` instead of `str` for entity platform matching
* Use `get_zha_gateway` in a few more places
* Fix flaky unit test
* Use `slots` for ZHA data
Co-authored-by: J. Nick Koston <nick@koston.org>
---------
Co-authored-by: David F. Mulcahey <david.mulcahey@icloud.com>
Co-authored-by: J. Nick Koston <nick@koston.org>
* Do not connect to the radio hardware within `_connect_zigpy_app`
* Make `connect_zigpy_app` public
* Create radio manager instances from config entries
* Cache device triggers on startup
* reorg zha init
* don't reuse gateway
* don't nuke yaml configuration
* review comments
* Fix existing unit tests
* Ensure `app.shutdown` is called, not just `app.disconnect`
* Revert creating group entities and device registry entries early
* Add unit tests
---------
Co-authored-by: David F. Mulcahey <david.mulcahey@icloud.com>
* Also handle DiscovergyClientError as UpdateFailed
* Change AccessTokenExpired to InvalidLogin
* Also add DiscovergyClientError to config flow and tests
* add unit tests for sensors
* newline long strings
* unit test check and move time
* rename entry to entity
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* add types to test
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* fix newlined f strings
* remove if statement
* add some more explaination
* Update datetime
Co-authored-by: Robert Resch <robert@resch.dev>
* Simpler time update
Co-authored-by: Robert Resch <robert@resch.dev>
* add missing datetime import
* Update docustring - grammar
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* address comments and issues raised
* address docstrings too long
* Fix docstring
---------
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
Co-authored-by: Robert Resch <robert@resch.dev>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Joost Lekkerkerker
Bouwe Westerdijk
G Johansson
Guy Shefer
Brandon Rothweiler
Martin Hjelmare
Michael Hansen
Robert Resch
Michał Huryn
Richard Kroegel
jjlawren
Kevin Stillhammer
Allen Porter
Marc Mueller
J. Nick Koston
Sheldon Ip
Mick Vleeshouwer
Erik Montnemery
Jan Bouwhuis
Álvaro Fernández Rojas
elmurato
Raman Gupta
Simone Chemelli
puddly
Marcel van der Veldt
Nicolas van de Walle
Robert Hillis
Mike Woudenberg
Abílio Costa
David Knowles
enzo2
Jan-Philipp Benecke
Justin Grover
TJ Horner
TheJulianJES
Guido Schmitz
Shay Levy
Ernst Klamer
René Klomp
Franck Nijhof
Ian
Maciej Bieniek
Dave T
Robert Groot
Brett Adams
Aaron Collins
Luke Lashley
Simon Lamon
Jc2k
Zehuan Li
RoboMagus
c0ffeeca7
Ville Skyttä
uvjustin
Tudor Sandu
Mike
lennart24
Artur Pragacz
Jesse Hills
Rami Mosleh
Diogo Morgado
Jeef
nachonam
Robert Svensson
Michael Hammer
Edouard Lafargue
Olen
Michael
Paulus Schoutsen
Kevin Worrel
Daniel Trnka
Scott Colby
Nathan Tilley
rappenze
Pedro Januário
Fletcher
Jan-Philipp Benecke
jan iversen
Ravaka Razafimanantsoa
Ståle Storø Hauknes
Marty Sun
mkmer
Quentame
Jan Rieger
starkillerOG
John Hollowell
Mike Degatano
Joakim Sørensen
Michael Arthur
Tony
Yuxiang Zhu
Diogo Gomes