* allow to set a desired update interval for camera_proxy_stream view
* lint
* refactor into a seperate method.
Keep the handle_async_mjpeg_stream method to be overridden by platforms
so they can keep proxying the direct streams from the camera
* change descriptions
* consolidate
* lint
* travis
* async/await and force min stream interval for fallback stream.
* guard clause. Let the method raise error on interval.
* is is not =
* what to except when you're excepting
* raise ValueError, remove unnecessary 500 response
* Add more parameters for DSMR component
* Add suiting icon for power failure
* Add suiting icon for swells & sags
* Fix tab indentation -> spaces
* Fix too long lines (PEP8)
According to my observations, the "switch_energy" value displayed by Pyfritzhome is the sum of Wh over the last week since measurement.
As a result, the correct divisor for representing output as kWh would be 1000 instead of 10000.
* Add initial user foundation to Home Assistant
* Address comments
* Address comments
* Allow non-ascii passwords
* One more utf-8 hmac compare digest
* Add new line
- Instead of registering listeners in the entity __init__, do it in
async_added_to_hass to avoid errors updating an entity which isn't fully
set up yet
- Change from schedule_update_ha_state to async_schedule_update_ha_state
* Fix TypeError on round(self.humidity)
Some weather platforms postpone the first data fetch for a while on init. As a result round(self.humidity is called before it is assigned a value, producing an error. This is a fix for that.
* Rewrite to avoid false negative evaluation
As per the suggestion from @OttoWinter, rewrite to avoid matching e.g. 0.0 as false.
With Darksky allowing only 1000 API requests per day, 2 minutes retry seems to be bit closer to running over the limit and actually it did for 5 days in my account. Hence proposing a change to 5 minutes to keep the API happy and also it doesn't hurt to check the weather for every 5 mins than 2 mins someone lives in Jupiter :-P
* add initial precipitation support
* move attr to component
* remove blank line
* add forecast attributes to platform and update demo
* add tests
* break long lines
* calc lower temp correctly
* move all new attributes to component
* convert temp low only when existing
* Working but incomplete
* Remove events on unload
* Add unload test
* Fix failing sensor test
* Improve unload test
* Move DeconzEvent to init
* Fix visual under-indentation
* Update hue_api.py
add dummy group handler for logitech-pop
* Update __init__.py
add HueGroupView for logitech pop
* Update __init__.py
removed whitespace on blankline
* fix line limit and space
* fix indents
* fix more docstring and formatting issues.
* fix more whitespace issues
* Fix pylint issue
There's one particular QNAP model which sometimes return empty/null temperatures
for certain disks. This commit ensures that this model can be integrated with HASS
without causing KeyErrors or other exceptions - if this edge case is hit, the
sensor will simply show `0` instead.
Eufy device state isn't reported if the bulb is off, so avoid stamping on
the previous values if the bulb isn't going to give us useful information.
In addition, improve handling of bulb turn on if we aren't provided with a
brightness - this should avoid the bulb tending to end up with a brightness of
1 after power cycling.
* Initial commit
* Add error handling to config flow
Change unique identifyer to name
Clean up hound comments
* Ensure hass home zone is created with correct entity id
Fix failing tests
* Fix rest of tests
* Move zone tests to zone folder
Create config flow tests
* Add possibility to unload entry
* Use hass.data instead of globas
* Don't calculate configures zones every loop iteration
* No need to know about home zone during setup of entry
* Only use name as title
* Don't cache hass home zone
* Add new tests for setup and setup entry
* Break out functionality from init to zone.py
* Make hass home zone be created directly
* Make sure that config flow doesn't override hass home zone
* A newline was missing in const
* Configured zones shall not be imported
Removed config flow import functionality
Improved tests
* Recode to async version of homematicip-rest-api
* Remove blank line
* Cleanup of access point status class
* Fix to loong line
* Fix import errors
* Bugfix missing wait the _retry_task for sleep command
* Update comment
* Updates after review
* Small updates of logging and property name
* Fix DOMAIN and revert back to lowercase snakecase strings
* Fix intention and tripple double quotes
* Fix travis build
* Remove unnecessary state attributes
* Fix optional name in configuration
* Further reduction of state attributes
* Use forward entry setup with light platform
* Move sensor to forward entry setup
* Use forward entry setup with binary sensors
* Use forward entry setup with scene platform
* Remove import of unused functionality
* Move deconz setup in to setup entry
Create initial negative tests for setup entry
* Fix hound comment
* Improved tests
* Add test for scene platform
* Add test for binary sensor platform
* Add test for light platform
* Add test for light platform
* Add test for sensor platform
* Fix hound comment
* More asserts on sensor types
* Handle HomeKit configuration failure more cleanly
Add support for handling cases where HomeKit configuration fails, and give
the user more information about what to do.
* Don't consume the exception for a homekit.UnknownError
If we get an UnknownError then we should alert the user but also still
generate the backtrace so there's actually something for them to file in
a bug report.
When an OpenWrt device monitored via ubus is offline, this causes the
log to be flooded with several exceptions. Avoid this by catching
requests.exceptions.ConnectionError in addition to
requests.exceptions.Timeout.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* Initial working config entry with discovery
* No need for else
* Make sure that imported config doesnt exist as a config entry
* Improve checks to make sure there is only instance of deconz
* Fix tests and add new tests
* Follow upstream changes
Fix case when discovery started ongoing config entry and user completes setup from other path it was possible to complete discovered config entry as well
* Add test to make sure link doesn't bypass any check for only allowing one config entry
* Dont use len to determine an empty sequence
* Cleanup
* Allways get bridgeid to use as unique identifier for bridge
* Fix colorlog on windows
Modified the way logging is initialized to fix two things.
1. If the import of `colorlog` fails the logs will still be formatted
using the expected HASS log format.
2. Ensure that `logging.basicConfig` is called AFTER `colorlog` is
imported so that the default handler generated will be writing to the
wrapped stream generated when `colorama` is initialized. This allows
colored logging to work on Windows.
Added support for a `--log-no-color` command line switch in the event
that someone just wants to disable colored log output entirely.
* Fix line lengths
* Switch default value
* implemented services for bmw remote services
* added vin to attributes of tracker
* moved component to new package
* added service description
* fixed static analysis warnings
* implemented first set of code reviews
* removed locking related services
* fixed static analysis warnings
* removed excess blank lines
* refactoring of setup() to resolve warning
"Cell variable bimmer defined in loop (cell-var-from-loop)"
* added missing docstring
* added service to update all vehicles from the server
* implemented changes requested in code review
* added check if invalid vin is entered
* Added web view for to get url
* Added web view for TTS to get url
* Added web view for TTS to get url
* Added web view for TTS to get url
* Fixed test
* added auth
* Update __init__.py
* Added ability to use FB messenger broadcast api. use 'BROADCAST' keyword for first target in the facebook notifiy component to enable.
* Added ability to use FB messenger broadcast api. use 'BROADCAST' keyword for first target in the facebook notifiy component to enable.
* Added ability for broadcast messaging for facebook messenger notify platform.
* Added ability for broadcast messaging for facebook messenger notify platform.
* Added ability for broadcast messaging for facebook messenger notify platform.
* Added ability for broadcast messaging for facebook messenger notify platform.
* Added ability for broadcast messaging for facebook messenger notify platform.
* Added ability for broadcast messaging for facebook messenger notify platform.
* Added ability for broadcast messaging for facebook messenger notify platform.
* Added ability for broadcast messaging for facebook messenger notify platform.
* Added ability for broadcast messaging for facebook messenger notify platform.
* Added ability for broadcast messaging for facebook messenger notify platform.
* Added ability for broadcast messaging for facebook messenger notify platform.
* Update facebook.py
* Update facebook.py
* Update facebook.py
* Update facebook.py
* Added support for a new platform: climate.modbus
* Made changes based on code review.
* Made changes based on code review
* Made changes that were recommended in the pull request review.
* Fixed spacing line 144
* Added docstrings for the added helper functions.
* Fixed set_temperature() function to use a variable local to the function for the target temp.
* Fixed lint formatting error
* Modified logic when checking the target temperature, as well as fixing the setup_platform function
* Broadlink Sensor - switch to connection-less mode
Solved the issue with broadlink sensor that occurs when short connection loss with RM2/3 is present on poor WiFi networks.
* Update broadlink.py
* Update broadlink.py
* Update broadlink.py
* Update broadlink.py
* Update broadlink.py
* Update broadlink.py
* Update broadlink.py
* Start of development
* Add extra attributes from unifi scanner
* Store IP of the device in the state attributes with nmap
* Allow not defining get_extra_attributes method in derived classes
* Fix up Eufy handling of colour lights
The Eufy colour lights have separate colour and temperature modes, and give
much less light output when in colour mode. Brightness is also handled in
a slightly confusing way, which means that state must be maintained in
order to avoid switching the light between modes by accident. Add some
additional handling for that.
* Bump the lakeside version
This version has important bugfixes for colour bulbs.
* Hound fixes
* Adding USCIS component
* Adding Line after the class DOC
* Update : Extract USCIS logic code to Component
* Update : Extract USCIS logic code to Component
* Adding CURRENT_STATUS
* Change Error handling, remove date from attributes
* Update the Version for USCIS
* Update uscis.py
* Add support for controlling homekit lights and switches
This adds support for controlling lights and switches that expose a HomeKit
control interface, avoiding the requirement to implement protocol-specific
components.
* Comment out the homekit requirement
This needs to build native code, so leave it commented for now
* Review updates
* Make HomeKit auto-discovery optional
Add an "enable" argument to the discovery component and add a list of
optional devices types (currently just HomeKit) to discover
* Further review comments
* Update requirements_all.txt
* Fix houndci complaints
* Further review updates
* Final review fixup
* Lint fixups
* Fix discovery tests
* Further review updates
* Add support for Eufy bulbs and switches
Add support for driving bulbs and switches from the Eufy range.
* Fix hound checks
* Satisfy pylint
* Handle review comments
* Review updates and test fixes
* PyLint is a bit too aggressive
* Added feedback sound configuration
* Added feedback sound configuration
* Cleaned up feedback off
* Cleaned up whitespace
* Moved feedback pus to helper funx
* Async
* Used async_mock_service for tests
* Lint
* Support binary_sensor and device_tracker for HomeKit
* Add test for get_accessory and binary sensor
* Test service.display_name and char_detected.display_name
* Split test to improve speed
With AbodePy 0.12.3, dimmers will now work but a conversion of the brightness is required. Additionally, when a brightness value of 100 is sent to Abode, 99 is returned causing AbodePy to throw an error so this component will send 99 instead of 100.
Keeps the brightness value sent and returned from the device response consistent. However, during initialization and when a device refresh is received, Abode can return 100 thus we'll convert that case back to 99.
* Initialise filter with historical values
Added get_last_state_changes()
* fix test
* Major changes to accommodate history + time_SMA
# Conflicts:
# homeassistant/components/sensor/filter.py
* hail the hound!
* lint fixed
* less debug
* ups
* get state from the proper entity
* sensible default
* No defaults in get_last_state_changes
* list_reverseiterator instead of list
* prev_state to state
* Initialise filter with historical values
Added get_last_state_changes()
* fix test
* Major changes to accommodate history + time_SMA
# Conflicts:
# homeassistant/components/sensor/filter.py
* hail the hound!
* lint fixed
* less debug
* ups
* get state from the proper entity
* sensible default
* No defaults in get_last_state_changes
* list_reverseiterator instead of list
* prev_state to state
* update
* added window_unit
* replace isinstance with window_unit
* Add async timeout feature
* Decorator for setter methods to limit service calls to HA
* Changed to async
* Use async_call_later
* Use lastargs, async_add_job
* Use dict for lastargs
* Updated tests to stop patch
* Enable autodiscovery for mqtt cameras, BREAKING CHANGE: homogenisation topic->state_topic
* fix line too long
* fix topic->state_topic in test
* image shall not be the state of entity
* Added the ability to switch Tahoma Garage door relay.
Those are special switches that can only be pushed.
Their state is always OFF, they react to the turn_on action, perform it, but stay OFF
* fixing indents and so on
* CI fix
* fix asuswrt ap mode failure
When using ap mode, asuswrt device_tracker does dont work properly as ip can not be retrieved from wl command. This version fixed the issue.
* save 1 line code
* another 2 lines saved
* typo correction
* Use 0/1 for GPIO writes rather than true/false
GPIO pins don't appear to respond to true/false writes, and this is reflected in code elsewhere. For example, in `\components\switch\rpio_gpio.py` the following code is used:
```
def turn_on(self, **kwargs):
"""Turn the device on."""
rpi_gpio.write_output(self._port, 0 if self._invert_logic else 1)
self._state = True
self.schedule_update_ha_state()
```
This code works. Hence this PR uses 0/1 in the raspberry pi GPIO cover, instead of true/false.
* Update rpi_gpio.py
* Added support for requesting RSSI values from Bluetooth devices
* Moved Bluetooth RSSI code to separate library and imported it
* Cleaned up tuple issues
* Changed concatination of mac addresses
* Changed string formatting to use new style
* Ran gen_requirements_all.py
Paulus Schoutsen
Ville Skyttä
NovapaX
blackwind
Ruben
Otto Winter
Simon Hörrle
sander76
Russell Cloran
Diogo Gomes
mvn23
Mahesh Subramaniya
cdce8p
Fabian Affolter
Anders Melchiorsen
Jens Østergaard Nielsen
Hate-Usernames
escoand
Kane610
Matthew Garrett
engrbm87
Gabe
Matt Schmitt
Charles Garwood
Marcus
Maciej Bieniek
Aaron Bach
ratcash
Colin O'Dell
Sebastian Muszynski
Paulus Schoutsen
Robin
GotoCode
Daniel Perna
Daniel Høyer Iversen
Mattias Welponer
c727
Mitko Masarliev
Thijs de Jong
Kerwin Bryant
stephanerosi
thelittlefireman
John Mihalic
Mark Coombes
Stijn Tintel
David Broadfoot
Ryan Bahm
Jon Maddox
Johann Kellerman
Rohan Kapoor
ChristianKuehnel
Pascal Hahn
Viorel Stirbu
koolsb
Michael Wei
Ben Randall
Nick Whyte
Mister Wil
Tod Schmidt
Dmitry Avramenko
Heiko Thiery
karlkar
Thibault Cohen
Fabien Piuzzi
Khole
Lincoln Kirchoff
Paxy
Marco
Josh Anderson
Kyle Niewiada
Pascal Vizeli
Gerard
TheCellMC
dersger
Mohamad Tarbin
geekofweek
xTCx
Yonsm
Marco Orovecchia
Wojtek
Toby Gray
Adam Mills
Michael Kutý
citruz
Sean Wilson
Phil Kates
Erik Eriksson
dangyuluo
shred86
thrawnarn
Henrik Nicolaisen
Juggels
cgtobi
Philipp Schmitt
Timmo
jmtatsch
ikucuze
PlanetJ
tadly
Niklas Morberg
shuaiger
Tom Harris
John Arild Berentsen
Oleg
Kevin Raddatz
Wolfgang Malgadey
Niklas Wagner
Lewis Juggins
Chris Jones
Martin Hjelmare
Zhao
Frederik Bolding