* Added device tracker support for EE Brightbox 2
* removed timeago dependency
* get scanner checks and improved tests
* fixed lint issues
* removed redundant timeago from test requirements
* fixed variable naming in test
* removed unecessary blank line
* catch TypeError's in addition to ValueError's in response from unifi access point
sometimes unifi's access point returns incomplete json which results in a TypeError because ssid_table is None
* fix syntax error
* Add mysensors state update delay
* Schedule state update after delay to avoid updating state multiple
times during the same short timespan.
* Code review
* Update googlehome.py
Added name from bluetooth device to attributes
* Update homeassistant/components/device_tracker/googlehome.py
Check if key exists before assigning name
Co-Authored-By: cliffordwhansen <clifford@nighthawk.co.za>
* Bluetooth tracker: add device_id configuration option
Makes the device id that bluetooth tracker is using configurable instead
of using the first available device.
* Remove unncessary default in config.get
It is already handled in the configuration validation.
* Added motion, speed and battery attributes.
* Use dict[key] when we know there is a value there.
Co-Authored-By: ludeeus <joasoe@gmail.com>
* Use dict[key] when we know there is a value there.
Co-Authored-By: ludeeus <joasoe@gmail.com>
* Use dict[key] when we know there is a value there.
Co-Authored-By: ludeeus <joasoe@gmail.com>
* Use dict[key] when we know there is a value there.
Co-Authored-By: ludeeus <joasoe@gmail.com>
* Use dict[key] when we know there is a value there.
Co-Authored-By: ludeeus <joasoe@gmail.com>
* Use dict[key] when we know there is a value there.
Co-Authored-By: ludeeus <joasoe@gmail.com>
* Restore states through a JSON store
* Accept entity_id directly in restore state helper
* Keep states stored between runs for a limited time
* Remove warning
* Fix false log message on CAPsMAN only devices
False debug log message appeared on CAPsMAN only devices without physichal wireless interfaces. This fix eliminates them.
* Fixed indentation to pass flake8 test
* Update mikrotik.py
* Update mikrotik.py
* Added basic api_ssl support
Added preliminary support to use api_ssl instead of api. It don't check the validity of the certificate need it.
At Home Assistant side add ssl = true to your sensor configuration, and don't forget to change the port too (to 8729 by default):
device_tracker:
- platform: mikrotik
host: 192.168.88.1
port: 8729
ssl: true
username: homeassistant
password: TopSecret
At MikroTik side you have to add or generate a certificate, and configure api_ssl to use it. Here is an example:
/certificate add common-name="Self signed demo certificate for API" days-valid=3650 name="Self signed demo certificate for API" key-usage=digital-signature,key-encipherment,tls-server,key-cert-sign,crl-sign
/certificate sign "Self signed demo certificate for API"
/ip service set api-ssl certificate="Self signed demo certificate for API"
/ip service enable api-ssl
/ip service disable api
/user group add name=homeassistant policy=read,api,!local,!telnet,!ssh,!ftp,!reboot,!write,!policy,!test,!winbox,!password,!web,!sniff,!sensitive,!romon,!dude,!tikapp
/user add group=homeassistant name=homeassistant
/user set password="TopSecret" homeassistant
* Fixed import missind ssl lib
* SSL support code cleanup, use ssl-api port by default if ssl enabled
* Restored accidentalli deleted method parameter
* Fixed Python 3.5.3 compilation errors
Fixed Python 3.5.3 compilation errors reported by Travis CI
* Removed duplicated MTK_DEFAULT_API_PORT
* Adds upload and download sensors for asuswrt and makes it a component.
* Rebase
* removes warnings
* Fixing review issues
* More robust connection phase
* Generate dependencies
* Not needed try catch
* Rename sensors
* Revorked tests so they can be turned on again
* Using component setup
* Test through correct setup
* Forgot we dont need to worry about older py
* Split out geofency with a component and platform
* Make geofency component/device_tracker more async
* Move geofency tests to new package
* Remove coroutine in geofency callback
* Lint
* Fix coroutine in geofency callback
* Fix incorrect patch
* Add attributes of ARP table
This adds the device attributes available in the ARP table and a few more. Implementation is inspired by the nmap scanner.
* lint spaces
* Add support for Google Home device tracking.
* Use dict[key] for options.
* Delete googlehome.py.save
* Change stylling of name, and attr mac_address to btle_mac_address, removed unesssesarry attributes copying.
* Refactor mysensors message handling
* Add handler module and register handlers per message type or message
sub-type. This will allow easier extension of message handling in the
future.
* Move some common functions to a helpers module.
* Add node handler and signal
* Fix inconsistent return
* Upgrade pymysensors to 0.18.0
* Fix bug in message modification.
* Upgrade to asuswrt 1.1.1 to better handle mac addresses with letters in them
Signed-off-by: Gavin Mogan <git@gavinmogan.com>
* Update requirements_all as well
Signed-off-by: Gavin Mogan <git@gavinmogan.com>
This prevents the following traceback that will otherwise occur.
Traceback (most recent call last):
File "/usr/local/lib/python3.6/concurrent/futures/thread.py", line 56, in run
result = self.fn(*self.args, **self.kwargs)
File "/usr/local/lib/python3.6/site-packages/homeassistant/components/device_tracker/bluetooth_le_tracker.py", line 107, in update_ble
see_device(address, devs[address], new_device=True)
File "/usr/local/lib/python3.6/site-packages/homeassistant/components/device_tracker/bluetooth_le_tracker.py", line 47, in see_device
see(mac=BLE_PREFIX + address, host_name=name.strip("\x00"),
AttributeError: 'NoneType' object has no attribute 'strip'
* Google Maps supports battery level and charging.
With 3.0.2 locationsharinglib now the battery level and the charging attributes are available.
* Update google_maps.py
fix too long line error
* Update google_maps.py
Fix multi line import, and line length limit
* Update gen_requirements_all.py
Add locationsharinglib to gen_requirements_all
* update requirements_all
* Last try to fix requirements_all...
* Add configurable host for bbox routers
Add configurable host for bbox router running on non-default IP addresses.
* Fix unused import
Fix unused import which also resolves "line too long"
* Fix wrong import order
* Update validation
The last_seen attribute was a datetime in the local timezone but with
no tzinfo (i.e., a "naive" datetime.) When state changes occurred it
would be printed incorrectly in homeassistant.log because
homeassistant.util.dt.as_local assumes any datetime without tzinfo is
UTC. Also most, if not all, datetime attributes are timezone aware in
UTC. So use homeassistant.util.dt.as_utc (which assumes a naive
datetime is local) to convert last_seen to a timezone aware datetime
in UTC.
* Add device_tracker.bluetooth_update service
Will immediately scan for Bluetooth devices outside of the interval timer. Allows for less frequent scanning, with scanning on demand via automation.
* remove excess whitespace per bot comments
* Refactored update_bluetooth to call new function update_bluetooth_once
* Change service name to bluetooth_tracker_update to reflect platform name
* Reformat for line length
* Linting fix, pydoc, first line should end with a period
* Fixed a method call, and removed some more unsused parameters
* Fix 'Error setting up platform tplink' error when a scanner fails even if another scanner would succeed
* Try to fix tox errors
* Adjust code based on PR comments
* Fix bt_home_hub_5 device tracker
Updated BT Home Hub 5 device tracker component to get it working again. The old parsing method of the DNS table has been broken for a while causing the component to fail to get connected devices. A new parsing method has been implemened and fixes all previous issues.
* Moved part of code to a published PyPi library
* Fixed Violations
* Fixed bugs in device tracker
* Moved API Specific Code to PyPi Repository
* Updated to fit requested changes, removed test as it is no longer valid and updated requirement_all.txt
* Update to fit style requirements and remove redundant code
* Removed Unnecessary Comment
* Fixed NDMS for latest firmware.
Now using telnet instead of Web Interface
* Using external library for NDMS interactions
* updated requirements_all
* renamed `mac` to `device` back
* Using generators for name and attributes fetching
## Description:
More fixes flagged by pylint 2 that don't hurt to have before the actual pylint 2 upgrade (which I'll submit soon).
## Checklist:
- [ ] The code change is tested and works locally.
- [x] Local tests pass with `tox`. **Your PR cannot be merged unless tests pass**
* Support latest tplink Archer D9 Firmware version / Device Scanner
* tplink integration on pypi package
* initialize the client only once
* remove unnecessary instance attributes
* Add python 3.7 to travis and tox
* Use pyyaml from github
* Don't version constraints
* Fix version tag
* Change to new pyyaml release
* Python 3.7 requires xenial
* Fix namespace detection
* Use correct RegEx type
* Update pexpect to 4.6
* Use correct validation for dictionaries
* Disable Py37 incompatible packages
* Upgrade all pexpect to 4.6
* Add explicit None as default param
* Add a device tracker for Freebox routers
* Automatic setup of Freebox device tracker based on discovery
* Make the Freebox device tracker asynchronous
* Improving icloud device tracker
* Adding config validations for new values
* Adding config validations for new values
* Moving icloud specific setup to platform schema. Setting default in platform schema.
I have a Hitron modem provided by Shaw communications rather than from Rogers as the Docs specify for this device_tracker but it seems like the api/code is all the same except that the login failed due to the password being passed as "pws" instead of "pwd". Making that one character change allowed HASS to read the connected device details from my Hitron modem. If this difference is actually one that stands between the Rogers-provided Hitron modems and the Shaw-provided variant, I am happy to create another device-tracker file for the Shaw modem. I just figured I would go with the simplest solution first.
* Initial commit
* Add error handling to config flow
Change unique identifyer to name
Clean up hound comments
* Ensure hass home zone is created with correct entity id
Fix failing tests
* Fix rest of tests
* Move zone tests to zone folder
Create config flow tests
* Add possibility to unload entry
* Use hass.data instead of globas
* Don't calculate configures zones every loop iteration
* No need to know about home zone during setup of entry
* Only use name as title
* Don't cache hass home zone
* Add new tests for setup and setup entry
* Break out functionality from init to zone.py
* Make hass home zone be created directly
* Make sure that config flow doesn't override hass home zone
* A newline was missing in const
* Configured zones shall not be imported
Removed config flow import functionality
Improved tests
When an OpenWrt device monitored via ubus is offline, this causes the
log to be flooded with several exceptions. Avoid this by catching
requests.exceptions.ConnectionError in addition to
requests.exceptions.Timeout.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* implemented services for bmw remote services
* added vin to attributes of tracker
* moved component to new package
* added service description
* fixed static analysis warnings
* implemented first set of code reviews
* removed locking related services
* fixed static analysis warnings
* removed excess blank lines
* refactoring of setup() to resolve warning
"Cell variable bimmer defined in loop (cell-var-from-loop)"
* added missing docstring
* added service to update all vehicles from the server
* implemented changes requested in code review
* added check if invalid vin is entered
* Start of development
* Add extra attributes from unifi scanner
* Store IP of the device in the state attributes with nmap
* Allow not defining get_extra_attributes method in derived classes
* fix asuswrt ap mode failure
When using ap mode, asuswrt device_tracker does dont work properly as ip can not be retrieved from wl command. This version fixed the issue.
* save 1 line code
* another 2 lines saved
* typo correction
Richard Mitchell
rolfberkenbosch
krygal
Rohan Kapoor
Caleb Dunn
Thomas Delaet
Martin Hjelmare
Fabian Affolter
Clifford W. Hansen
Joakim Sørensen
SNoof85
Igor Motov
kdvlr
Mathieu Velten
Ville Skyttä
Andrey Kupreychik
Paulus Schoutsen
arigilder
Martin Gross
Teemu R
jxwolstenholme
Erik Eriksson
Adam Mills
Robert Dunmire III
Soós Péter
Eliseo Martelli
Rick van Hattem
Aaron Bach
Abílio Costa
kennedyshead
Sebastian Muszynski
Georgi Kirichkov
akloeckner
Mikko Tapionlinna
Corey Edwards
Gavin Mogan
Luc Touraille
Dougal Matthews
Miloš Bunčić
Colby Rome
cdce8p
Michael Wei
Totoo
Paul Biester
kunago
Pascal Vizeli
Jason Hu
Phil Bruckner
Hunter Horsman
Paulus Schoutsen
Tim Bailey
Wim Haanstra
Charles Garwood
DubhAd
ahobsonsayers
Ryan Davies
Cheong Yip
Dario Iacampo
Andrey
shker
Dejan Dakić
Lorenz Schmid
thelittlefireman
Mike
Evgeniy
Otto Winter
Kane610
Stijn Tintel
Ryan Bahm
stephanerosi
ChristianKuehnel
Marco
Kyle Niewiada
Toby Gray
PlanetJ
shuaiger