This is extremely useful if you want to support wemos that are on
another subnet or across a VPN. It also lets you sidestep the discovery
process, which is problematic for a lot of people and situations.
In order for this to work, we need to bump the pywemo requirement to
0.3.10, which includes my changes to make this possible.
WeMo devices can be manually configured by adding a static section to
the config, like this:
switch:
platform: wemo
static:
- 192.168.100.5
- 192.168.100.6
When we update the mFi server for the state of a switch, the new
state is not always reported immediately if we update right after
the action (the server is not RESTful).
This patch adds some internal target-state handling to report the
desired state on the next poll, allowing any subsequent polls to
override that state.
Also, bump the version requirement for mficlient to 0.2.2 to absorb
a bug fix.
This adds support for NetworX-based alarm panels and should work for
any such panel equipped with a NX584 serial interface module. This
includes NX-4/6/8/8E, where the NX8E has this interface built-in.
It requires the pynx584 module, and requires running the server
component somewhere that has connectivity to the panel via serial,
which may include a serial-over-lan connection.
* The application of the version check in unit_of_measurement was
messed up after the last refactor. Fix that again.
* An error could occur in device_state_attributes if there was a
mismatch between used value_type in the device and mysensors
version in config. Add try... except to handle that.
Bump pyvera version.
Bump pywemo version.
Add unavailable status before properly initialised for maker and insight.
This adds support for Ubiquiti's UniFi Video cameras via their
NVR device (or service). By configuring just the address of the
NVR and a valid API key, all cameras are discovered and enabled,
including direct-to-camera image snapshot-based video support.
Major bugfix. ``` get_bulbs ``` and similar methods were always returning empty lists.
Better unit tests have been added to https://github.com/bradsk88/python-wink to avoid this regression.
Support the SCSGate device. This will allow home-assistant to interact
with BTicino/Legrand MyHome system.
Signed-off-by: Flavio Castelli <flavio@castelli.me>
Paulus Schoutsen
Dan Smith
Eric Rolf
Eric Rolf
Daniel
Flyte
Fabian Affolter
MartinHjelmare
bradsk88
nkgilley@gmail.com
carlosmgr
Tim
Stefan Jonasson
Per Sandström
Flavio Castelli
William Scanlon