* Unused pylint suppression cleanups
* Remove outdated pylint bug references
* Add flake8-noqa config and note to run it every now and then
* Add codes to noqa's
* Unused noqa cleanups
* Mark entities as unavailable when they are removed but are still registered
* Add sync_entity_lifecycle to collection helper
* Remove debug print
* Lint
* Fix tests
* Fix tests
* Update zha
* Update zone
* Fix tests
* Update hyperion
* Update rfxtrx
* Fix tests
* Pass force_remove=True from integrations
Co-authored-by: Erik <erik@montnemery.com>
* Convert old groups unique ids
Work around for walrus operator not working properly :/
* Remove CONF_GROUP_ID_BASE once entities unique id are updated
* Don't use migrate_entry mechanism to update unique_ids of groups
* Remove walrus operator :(
* Fix review comments
* Walrusify assignment to old_unique_id
* Add fan support
* Add HVAC cool support
* Fix Martins comment from #43607
* Add preset support
* Improve climate test coverage
* Remove fan support
* Remove preset support
* Remove last preset piece
* Improve control of covers
* Log backtrace if available
* Do not create entity for controller tool
Binary sensor should use state rather than is_tripped
Add some more tests to lights and sensors
* Bump dependency to v74
* Fix Balloobs comments
* Add fan support to deconz
* Fix gateway test
* Fix lint issue
* Apply suggestions from code review
* Fix black
* Improve tests
* Store previously used speed in case turn_on service is called without a speed attribute
* Fix tests
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Add service that can clean up by deCONZ orphaned entries from device and entity registry
* Fix existing tests
* Add new test
* Add some inline comment to the service
* Use set not list
* Events are not entities
* Don't await unload_events
* Remove checks of entities content in tests
* List to set comprehension
* Why is it so hard to remember that sets arent parenthesis...
* Store all entities in dict
* Use stored unique id to select if to create entity or not
* Remove unnecessary init
* Change so same physical sensor doesnt try to create multiple battery sensors
Change so groups get created properly
* Add controls in tests that entities are logged correctly
* Add support for reload_on_update to _abort_if_unique_id_configured
async_update_entry now avoids firing update listeners and writing
the storage if there are no actual changes.
* Actually add the tests
* collapse branch
* Update homeassistant/config_entries.py
Co-authored-by: Franck Nijhof <git@frenck.dev>
* handle entries that lack the ability to reload
* reduce
* adjust konnected tests
* update axis tests
* fix blocking
* more mocking
* config flow tests outside of test_config_flow
* reduce
* volumio
* Update homeassistant/config_entries.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* set reload_on_update=False for integrations that implement self._abort_if_unique_id_configured(updates= and a reload listen
* get rid of copy
* revert test change
Co-authored-by: Franck Nijhof <git@frenck.dev>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Add support for "Window covering controller"
Some window cover devices such as Sunricher SR-ZG9080A are identified in deconz as "Window covering controller".
We need to include this device type in const.py to be integrated as type "cover" in home-assistant.
* Added Window covering controller to deconz tests
* Use config entry unique id
* Clean up
* Backwards compatiblity note
* Fix some of Balloobs comments
* Bump dependency to v66
* Black somehow missed config flow tests...
* Move set unique ID til after possibility to update existing entry
* Include all SSDP data in discovery info
* Use UPnP device description as discovery info, inject some SSDP attrs
* Clean up attribute names
* Adapt existing SSDP flows to changed attribute names
* Prefix all SSDP UPnP attribute name constants with ATTR_UPNP, tweak a bit
* Improve gateway tests
* Harmonize all tests to use the same gateway initialization method
* Improve scene tests
* Add gateway resync call to platform tests
* Forgot to change switch tests to use common gateway method
* Improve event tests
* Improve binary sensor tests
* Fix sensor tests
* Improve readability of binary sensor
* Fix climate tests
Fix sensor platform not loading climate devices as sensors
* Add test to verify adding new sensor after start up
* Improve configure service tests
* Add refresh device service test
* Add tests for setup and unload services
* Remove refresh device test from test_init
* Extra verification of deconz services existance in hass.data
* Early draft
* Getting there
* Working fully with Hue dimmer remote
* Fix Balloobs comments
* No side effects in constructor
* Improve hue dimmer
* Add Ikea remote control
* Add xiaomi button support
* Refactor getting deconz event
* Added xiaomi devices and tradfri wireless dimmer
* Resolve unique id from device id
* Add Hue Tap and Tradfri on off switch
* More triggers for ikea on off switch and Aqara double wall switch
* Add support for Tradfri open close remote
* Fix changes after rebase
* Initial test
* Change id to event_id
* Fix translations and add subtypes
* Try if tests pass without the new tests
* Revert disabling tests
Add new exception InvalidDeviceAutomationConfig
* Ignore places calling remotes
* Enable all gateway tests
* Found the issue, now to identify which test creates it
* Remove block till done
* See if device automation test passes in azure
* Register event to device registry
* Enable test sensors
* Skip deconz event tests currently failing
* Added reason why skipping tests
* First draft
* Support enabling disabled entities
* Clean up
* Move import
* Local entity enabled replaced during rebase
* Add option flow test
* Mark options properties with option
* Fixed logger name to allow selective logging
* Fixed thermostat mode ('off' and 'heat' modes were not consistent with Eurotronic Spirit Zigbee Thermostat state) and added 'auto' to supported mode
* Added required blank lines in code
* Black formatting
* Revert logging code added to each files. Instead, only replaced "." by __package__ in const.py
* Added a test on self._device.state_on to determine hvac_mode
* Black formatting
* Added debug message when unsupported hvac_mode is encountered
* Applied formatting recommandations
* Updated tests for 'auto' hvac_mode
* fix(hue): Load the SSDP component only when it's needed
* fix(deconz): Don't load the SSDP component when it's not needed
* Update config_flow.py
* Update test_config_flow.py
* Migrate deCONZ to use new SSDP discovery
Add new discovery info manufacturer URL to be able to separate Hue and deCONZ bridges
* Mark deCONZ as migrated in Discovery component
* Fix tests
* Fix Hue discovery ignore deCONZ bridge
* Less snake more badger
* Mushroom
* Fix indentation
* Config flow ignore manufacturer url that is not philips
* Improved sensors
* Lib update signalling
* Replace reason with changed
* Move imports to top of file
* Add support for secondary temperature reported by some Xiaomi devices
* Bump dependency to v59
* Update config flow to support updating host address
Improve tests
* Update gateway to handle new address signal
* Improve description why whe need to keep step_init
* Store gateways inside a dict in deconz domain
* Make reachable events gateway specific
* Gateway shall always exist
* Adapt new device signalling to support multiple gateways
* Services follow gateway master
* Working on unload entry
* Make unload and master handover work
Improve tests for init
* Fix config flow
* Fix linting
* Clean up init tests
* Clean up hassio discovery to fit with the rest
* Store gateways inside a dict in deconz domain
* Make reachable events gateway specific
* Gateway shall always exist
* Adapt new device signalling to support multiple gateways
* Services follow gateway master
* Working on unload entry
* Make unload and master handover work
Improve tests for init
* Fix config flow
* Fix linting
* Clean up init tests
* Clean up hassio discovery to fit with the rest
* Add support for services to specify bridgeid
* Add config flow step for manual input
Remove support for loading discovery config from json file
* Small cleanup
Fix all translations to step user instead of step init
* Revert to using step_init
* Small cleanup
Add test_gateway that was forgotten in a previous PR
* Fix hound comment
* Fix empty pydocstring
* Initial commit for deCONZ switch support
* Fix hound comment
* Fix martins comment; platforms shouldn't depend on another platform
* Fix existing tests
* New tests
* Clean up unnecessary methods
* Bump requirement to v43
* Added device state attributes to light
* Option to load or not to load clip sensors on start
* Full flow
* Fix config flow and add tests
* Fix attribute dark reporting properly
* Imported and properly configured deCONZ shouldn't need extra input to create config entry
* Add new device without restarting hass
* Remove debug prints
* Fix copy paste error
* Fix comments from balloob
Add tests to verify signalling with new added devices
* Fix hound comments
Add test to verify when new sensor is added
* Fix tests
* Unload entry should unsubscribe all deconz dispatchers
* Make sure mock setup also creates unsub in hass data
* Fix copy paste issue
* Lint
* Working but incomplete
* Remove events on unload
* Add unload test
* Fix failing sensor test
* Improve unload test
* Move DeconzEvent to init
* Fix visual under-indentation
* Use forward entry setup with light platform
* Move sensor to forward entry setup
* Use forward entry setup with binary sensors
* Use forward entry setup with scene platform
* Remove import of unused functionality
* Move deconz setup in to setup entry
Create initial negative tests for setup entry
* Fix hound comment
* Improved tests
* Add test for scene platform
* Add test for binary sensor platform
* Add test for light platform
* Add test for light platform
* Add test for sensor platform
* Fix hound comment
* More asserts on sensor types
* Initial working config entry with discovery
* No need for else
* Make sure that imported config doesnt exist as a config entry
* Improve checks to make sure there is only instance of deconz
* Fix tests and add new tests
* Follow upstream changes
Fix case when discovery started ongoing config entry and user completes setup from other path it was possible to complete discovered config entry as well
* Add test to make sure link doesn't bypass any check for only allowing one config entry
* Dont use len to determine an empty sequence
* Cleanup
* Allways get bridgeid to use as unique identifier for bridge
Robert Svensson
Erik Montnemery
Ville Skyttä
Jan-Willem Mulder
Paulus Schoutsen
Franck Nijhof
springstan
Dan Klaffenbach
J. Nick Koston
Carlos Giraldo
Knapoc
FrengerH
Jc2k
Bas Nijholt
5mauggy
Nikolay Vasilchuk
Pascal Vizeli
Julien Brochet
Pascal Vizeli
Jason Hu
Paulus Schoutsen
Leonardo Brondani Schenkel
Paulus Schoutsen