* Scaffold
* Added the en translation
* Modified the name
* Basic functionality for config flow.
* Pulled in enough to validate config flow works.
* Update manifest.json
* initial data polling (water and air temp sensors)
* Adding sensors, debugging update function
* polling updates working
* support for new data format from library
* Updated entity_id, friendly name, conversion for ppm, attributes for hayward display units, MSPSystemID and component systemID
* Fixed errors for PR
* clean up
* Add login exc, check if configured, test login.
* Remove debug print.
* Black formatting, ran isort, update requirements.
* Updated w isort. fix flake8 failures.
* Fix flake8 errors
* Fixed self.attrs to remove invalid self._ values - small change
* Missed on small change - fixing attributes
* Updated naming, updated unit of measure, updated icon, bumped omnilog…
* Updated to fix flake8 issues in __init__.py and config_flow.py
* Updated test_config_flow.py to pass, updated config_flow.py to correct errors in test
* Remove comments in preparation for PR
* update .covezragerc
* Formatting fix
* Rewrote sensors to dynamically add all BOWs, pumps, clorinators. Still to do - add CSAD sensors.
* Rewrote sensors to dynamically add all BOWs, pumps, clorinators. Still to do - add CSAD sensors.
* Added CSAD sensors for pools that have them.
* Added CSAD sensors for pools that have them.
* Fixed CSAD to not create if blank or don't exist, removed broad except usage to pass linting.
* Updated entity naming convention. Fixed linting issues.
* Added device association to the back yard / omnilogic system
* Removed .0 from ppm values when returning imperial values for salt sensor
* Updated to return state = None for water temp when pump is off, handled Chlorinator operatingMode = 2, and added PlatformNotReady check
* Corrected exception from Omnilogic library
* Bumped omnilogic to 0.3.7. Added alarm sensor/data to sensors. Handle pump off condition for ph and orp sensors.
* Bumped omnilogic to 0.3.7. Added alarm sensor/data to sensors. Handle pump off condition for ph and orp sensors.
* Bumped omnilogic to 0.3.7. Added alarm sensor/data to sensors. Handle pump off condition for ph and orp sensors.
* Removed nested_lookup dependency, bumped omnilogic.py to 0.3.8.
* Fixed lint error
* Added logging for sensor creation.
* Fixed linting errors with logging.
* Fixed explicit chaining of raised error. Fixed issue with alarm sensor.
* Fixed manifest.json based on feedback.
* Fixed self.attrs, should_poll, CoordinatorEntity, SCAN_INTERVAL from comments in PR.
* Addressed unique_id, moved data update coordinator, addressed minor other issues from testing
* Created main OmniLogic entity for common items, reworked DataUpdateCoordinator to it's own class.
* Addressed config_schema not used in __init__.py
* Fixed linting issues.
* Addressed several comments, still todo - separate sensor classes.
* Split the Omnilogic Sensors into separate logical classes for simpler logic.
* Fixed snake case lint error for AddAlarms (to add_alarms)
* Addressed config_flow issues from comments.
* Changed addressed ConfigNotReady issue from comments.
* Updated strings.json and generated corrected en.json with translations.
* Updated en.json to standard generated file.
* Added config_flow tests and updated issue with config_flow on cannot_connect
* Added test case for incomplete information entered.
* Compressed logic in the sensor classes to reduce duplication.
* Updated strings.json for polling_interval, added generic exception handling on config flow.
* Removed omnilogic from the .coveragerc omit file.
* Updated test_config_flow to follow recommended pattern.
* Excluded sensor.py from test coverage tests.
* Corected minor issues in test_config_flow from comments
* Fixed linting issues on last commits
* Fixed linting issues.
* Corrected issue when temp state is not available from Omnilogic
* Added omnililogic_common.py from .coveragerc to bypass test coverage check.
* Return false on Login Exception, handle OmniLogicException in config_flow and in tests.
* Handle all exceptions and in config_flow and tests, clarified test naming.
* Broke out test cases per comments.
* Regenerated en.json file.
* Addressed changes from comments in PR.
* Added session and bumped API to 0.4.0, addressed other comments from PR.
* Addressed entitydata (missed earlier).
* Fixed pylint issue
* Added test case for options flow in test_config_flow.py
* Removed super() and used self when calling methods in current class.
* Addressed comments in PR.
* Addressed comments in PR.
* Updated translations file.
* Rewrote data coordinator to output dict for easy searching.
* Updated chlorinator unit when chlorinator is on/off only
* Scaffold
* Added the en translation
* Modified the name
* Basic functionality for config flow.
* Pulled in enough to validate config flow works.
* Update manifest.json
* initial data polling (water and air temp sensors)
* Adding sensors, debugging update function
* polling updates working
* support for new data format from library
* Updated entity_id, friendly name, conversion for ppm, attributes for hayward display units, MSPSystemID and component systemID
* Fixed errors for PR
* clean up
* Add login exc, check if configured, test login.
* Remove debug print.
* Black formatting, ran isort, update requirements.
* Updated w isort. fix flake8 failures.
* Fix flake8 errors
* Fixed self.attrs to remove invalid self._ values - small change
* Missed on small change - fixing attributes
* Updated naming, updated unit of measure, updated icon, bumped omnilog…
* Updated to fix flake8 issues in __init__.py and config_flow.py
* Updated test_config_flow.py to pass, updated config_flow.py to correct errors in test
* Remove comments in preparation for PR
* update .covezragerc
* Formatting fix
* Rewrote sensors to dynamically add all BOWs, pumps, clorinators. Still to do - add CSAD sensors.
* Rewrote sensors to dynamically add all BOWs, pumps, clorinators. Still to do - add CSAD sensors.
* Added CSAD sensors for pools that have them.
* Added CSAD sensors for pools that have them.
* Fixed CSAD to not create if blank or don't exist, removed broad except usage to pass linting.
* Updated entity naming convention. Fixed linting issues.
* Added device association to the back yard / omnilogic system
* Removed .0 from ppm values when returning imperial values for salt sensor
* Updated to return state = None for water temp when pump is off, handled Chlorinator operatingMode = 2, and added PlatformNotReady check
* Corrected exception from Omnilogic library
* Bumped omnilogic to 0.3.7. Added alarm sensor/data to sensors. Handle pump off condition for ph and orp sensors.
* Bumped omnilogic to 0.3.7. Added alarm sensor/data to sensors. Handle pump off condition for ph and orp sensors.
* Bumped omnilogic to 0.3.7. Added alarm sensor/data to sensors. Handle pump off condition for ph and orp sensors.
* Removed nested_lookup dependency, bumped omnilogic.py to 0.3.8.
* Fixed lint error
* Added logging for sensor creation.
* Fixed linting errors with logging.
* Fixed explicit chaining of raised error. Fixed issue with alarm sensor.
* Fixed manifest.json based on feedback.
* Fixed self.attrs, should_poll, CoordinatorEntity, SCAN_INTERVAL from comments in PR.
* Addressed unique_id, moved data update coordinator, addressed minor other issues from testing
* Created main OmniLogic entity for common items, reworked DataUpdateCoordinator to it's own class.
* Addressed config_schema not used in __init__.py
* Fixed linting issues.
* Addressed several comments, still todo - separate sensor classes.
* Split the Omnilogic Sensors into separate logical classes for simpler logic.
* Fixed snake case lint error for AddAlarms (to add_alarms)
* Addressed config_flow issues from comments.
* Changed addressed ConfigNotReady issue from comments.
* Updated strings.json and generated corrected en.json with translations.
* Updated en.json to standard generated file.
* Added config_flow tests and updated issue with config_flow on cannot_connect
* Added test case for incomplete information entered.
* Compressed logic in the sensor classes to reduce duplication.
* Updated strings.json for polling_interval, added generic exception handling on config flow.
* Removed omnilogic from the .coveragerc omit file.
* Updated test_config_flow to follow recommended pattern.
* Excluded sensor.py from test coverage tests.
* Corected minor issues in test_config_flow from comments
* Fixed linting issues on last commits
* Fixed linting issues.
* Corrected issue when temp state is not available from Omnilogic
* Added omnililogic_common.py from .coveragerc to bypass test coverage check.
* Return false on Login Exception, handle OmniLogicException in config_flow and in tests.
* Handle all exceptions and in config_flow and tests, clarified test naming.
* Broke out test cases per comments.
* Regenerated en.json file.
* Addressed changes from comments in PR.
* Added session and bumped API to 0.4.0, addressed other comments from PR.
* Addressed entitydata (missed earlier).
* Fixed pylint issue
* Added test case for options flow in test_config_flow.py
* Removed super() and used self when calling methods in current class.
* Addressed comments in PR.
* Addressed comments in PR.
* Updated translations file.
* Rewrote data coordinator to output dict for easy searching.
* Updated chlorinator unit when chlorinator is on/off only
* Fixed ORP method not being @property, fixed unique_id potential issue. Does not address comments from PR.
* Rewrote coordinator for updated dict structure, rewrote sensors to parse new data structure.
* Added alarms as attributes on all entities which support alarm reporting.
* Updated SENSOR_TYPES to sensor_types to adhere to snake case in pylint.
* Addressed PR comments.
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Removed binary sensor conditions (alarms, on/off sensor types) and added ability for multiple guard conditions
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Updated per comments in PR for Pump Type and removal of force_update().
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/common.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Correctly asserting conditions for the login exception case.
* Update .coveragerc
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Mike Hershberger <mike.hershberger@gmail.com>
Co-authored-by: Chad <54695185+chadlyy@users.noreply.github.com>
Co-authored-by: Tim Empringham <tim.empringham@live.ca>
Co-authored-by: djtimca <60706061+djtimca@users.noreply.github.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Opened a new fresh page to clean my mess.
* Solved pylint warnings
* Fixing pylint issue of defining attr outside init.
* Excluded files from being tested by codecov.
* Solved binary sensor error.
* Fixed some stylisation errors.
* Resolved input not updating problem.
* Added port entry to test file.
* Added tests for create_entry.
* Added support for better state management.
* Increased code coverage of config_flow.py & made some tweaks.
* Increased coverage of config_flow.py by adding tests for unknown exceptions.
* A small bugfix.
* Stylised code as per Chris' suggestions.
* Stylised code again.
* Improved quality of test code.
* Added step_id in config flow tests.
* Implement config flow in the Broadlink integration
* General improvements to the Broadlink config flow
* Remove unnecessary else after return
* Fix translations
* Rename device to device_entry
* Add tests for the config flow
* Improve docstrings
* Test we do not accept more than one config entry per device
* Improve helpers
* Allow empty packets
* Allow multiple config files for switches related to the same device
* Rename mock_device to mock_api
* General improvements
* Make new attempts before marking the device as unavailable
* Let the name be the template for the entity_id
* Handle OSError
* Test network unavailable in the configuration flow
* Rename lock attribute
* Update manifest.json
* Import devices from platforms
* Test import flow
* Add deprecation warnings
* General improvements
* Rename deprecate to discontinue
* Test device setup
* Add type attribute to mock api
* Test we handle an update failure at startup
* Remove BroadlinkDevice from tests
* Remove device.py from .coveragerc
* Add tests for the config flow
* Add tests for the device
* Test device registry and update listener
* Test MAC address validation
* Add tests for the device
* Extract domains and types to a helper function
* Do not patch integration details
* Add tests for the device
* Set device classes where appropriate
* Set an appropriate connection class
* Do not set device class for custom switches
* Fix tests and improve code readability
* Use RM4 to test authentication errors
* Handle BroadlinkException in the authentication
* Run scaffold script
* Update version
* Bump version
* Initial commit
* Move meter and ESIID to device attributes
* Update internal to hourly due to api limit
* Format with Black
* Fix typo
* Update tests
* Update description
* Disable Pylint error
* Don't commit translations
* Remove meter number from sensor name
* Allow multiple meters per account
* Move data updates to a DataUpdateCoordinator
* Use setdefault to setup the component
* Move strings to const.py
* Fix tests
* Remove meter last updated attribute
* Bump smart-meter-texas version
* Fix logger call
Co-authored-by: J. Nick Koston <nick@koston.org>
* Remove unneeded manifest keys
Co-authored-by: J. Nick Koston <nick@koston.org>
* Remove icon property
Co-authored-by: J. Nick Koston <nick@koston.org>
* Handle instance where user already setup an account
Co-authored-by: J. Nick Koston <nick@koston.org>
* Remove icon constant
* Fix indentation
* Handle config flow errors better
* Use ESIID + meter number as unique ID for sensor
* Update config flow tests to reach 100% coverage
* Avoid reading meters on startup
Cherrypick @bdraco's suggestion
* Run scaffold script
* Update version
* Bump version
* Initial commit
* Move meter and ESIID to device attributes
* Update internal to hourly due to api limit
* Format with Black
* Fix typo
* Update tests
* Update description
* Disable Pylint error
* Don't commit translations
* Remove meter number from sensor name
* Allow multiple meters per account
* Move data updates to a DataUpdateCoordinator
* Use setdefault to setup the component
* Move strings to const.py
* Fix tests
* Remove meter last updated attribute
* Bump smart-meter-texas version
* Fix logger call
Co-authored-by: J. Nick Koston <nick@koston.org>
* Remove unneeded manifest keys
Co-authored-by: J. Nick Koston <nick@koston.org>
* Remove icon property
Co-authored-by: J. Nick Koston <nick@koston.org>
* Handle instance where user already setup an account
Co-authored-by: J. Nick Koston <nick@koston.org>
* Remove icon constant
* Fix indentation
* Handle config flow errors better
* Use ESIID + meter number as unique ID for sensor
* Update config flow tests to reach 100% coverage
* Remove unnecessary try/except block
This checks for the same exception just prior in execution on L51.
* Remove unused return values
* Add tests
* Improve tests and coverage
* Use more pythonic control flow
* Remove all uses of hass.data
Co-authored-by: J. Nick Koston <nick@koston.org>
* Squashed
* Fix requirements_all
* Update homeassistant/components/insteon/__init__.py
Only update options if the result is to create the entry.
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/insteon/__init__.py
No return value needed.
Co-authored-by: J. Nick Koston <nick@koston.org>
* Ref RESULT_TYPE_CREATE_ENTRY correctly
* Return result back to import config process
* Make DOMAIN ref more clear
Co-authored-by: J. Nick Koston <nick@koston.org>
* Add config flow to HLK-SW16
* Use entry_id for unique_id
* Add options update capability
* Refactor entry_id under domain
* Remove name from config
* Set options
* Remove options flow
* remove unneccesary else block from validate_input and move domain cleanup to async_unload_entry
* Add tests and config import
* Add back config schema
* Remove config import
* Refactor unload
* Add back config import
* Update coveragerc
* Don't mock validate_input
* Test duplicate configs
* Add import test
* Use patch for timeout test
* Use mock for testing timeout
* Use MockSW16Client for tests
* Check mock_calls count
* Remove unused NameExists exception
* Remove title from strings.json
* Mock setup for import test
* Set PARALLEL_UPDATES for switch
* Move hass.data.setdefault(DOMAIN, {}) to async_setup_entry
* WOLF Smart-set integration
* Removed translations. Changed device class of timestamp. Added new test for unknown exception
* Remove unit_of_measurement from hours sensor
* Code cleanup. Pull Request comments fixes
* ConnectError import change. Removed DEVICE_CLASS_TIMESTAMP
* Add unique id guard with tests. Use common translations. Move device_id resolution to config_flow.
* Remove debug print
* First step of an EnOcean integration refactoring, including code reorganisation and support of a setup config flow
* Moved title to root of strings file
* Fixed pre-commit checks failures
* Fixed linter errors
* Updated formatted string format in logs
* Removed leftover comment
* Multiple changes after PR change requests.
Using an import flow for yaml config, removed unnecessary logs, added proper unload in __init__ and EnOceanDongle
Replaced config state machine by several flows.
Serial port validity check done in the EnOceanDongle class asynchronously, removed unique ID from config flow
Multiple cosmetic changes
* Multiple changes after PR change requests
* Added variable to store default value, as setdefault was caught returning None when the empty dict literal was passed as an argument
* Literal used directly
* Added tests for EnOcean config flows, changed static methods to bundle methods for bundle
* Updated variable name
* Added missing mock to test, replaced repeated magic strings by constants
* Changed imports to avoid an unused import warning from pylint on DOMAIN
* Adding pylint exception for unused import
* Added proper propagation of setup and unload to platforms, removed dead code, some syntax changes
* Removed setup_entry forwarding as the entities can only be configured using yaml
* Removed forwarding of unload
* Enabled code coverage for config flow only
* Clean up coveragerc
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Initial commit for Dexcom integration
* Dexcom config flow testing
* Clarify errors during setup
* Resolve minor test issues
* Update sensor availability, resolve linting issues
* Add sensor tests
* Remove title due to 0.109, add abort
* >94.97% codecov/patch
* Move .translations/ to translations/
* Add constants for servers and unit of measurements
* Bump pydexcom version
* Updated domain schema, Dexcom creation
* Support for different units of measurement
* Update tests
* Remove empty items from manifest
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Raise UpdateFailed if fetching new session fails
* Switch everything over to required
* Simplify state information
* Simplify async_on_remove
* Pydexcom package now handles fetching new session
* Only allow config flow
* Remove ternary operator
* Bump version, pydexcom handling session refresh
* Using common strings
* Import from test.async_mock
* Shorten variable names
* Resolve tests after removing yaml support
* Return false if credentials are invalid
* Available seems to handle if data is empty
* Now using option flow, remove handling import
* Add fixture for JSON returned from API
* Overhaul testing
* Revise update options
* Bump pydexcom version
* Combat listener repetition
* Undo update listener using callback
* Change sensor availability to use last_update_success
* Update sensor availability and tests
* Rename test
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* add support for config flow for Plum Lightpad integration
* add support for config flow for Plum Lightpad integration (remove unintended change to requirements_test_all.txt)
* add support for config flow for Plum Lightpad integration (fix lint issues)
* add support for config flow for Plum Lightpad integration (PR feedback)
* add support for config flow for Plum Lightpad integration (fix lint)
* Update homeassistant/components/plum_lightpad/__init__.py
use debug instead of info for logging
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/plum_lightpad/strings.json
switch to use generated references instead of hard-coded strings
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/plum_lightpad/strings.json
switch to use references instead of hard-coded string
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/plum_lightpad/strings.json
removing translated title per suggestion
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/plum_lightpad/strings.json
removing per suggestion
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* remove unnecessary deepcopy
* remove unnecessary logging warning, since ignoring is expected for configuration.yaml scenario
* switch to hass.loop.create_task per PR feedback
* show login errors when configuring integration via UI (PR feedback)
* disable wrongly flag pylint violation
* add except handler to handle connection errors when setting up config flow entry
* address PR feedback regarding exception handling
* Update homeassistant/components/plum_lightpad/config_flow.py
use helper instead of custom code/message-id
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Squeezebox add config flow and player discovery
* Fixes to config flow
* Unavailable player detection and recovery
* Improved error message for auth failure
* Testing for squeezebox config flow
* Import configuration.yaml
* Support for discovery integration
* Internal server discovery
* Fix bug restoring previously detected squeezebox player
* Tests for user and edit steps in config flow
* Tests for import config flow
* Additional config flow tests and fixes
* Linter fixes
* Check that players are found before iterating them
* Remove noisy logger message
* Update requirements_all after rebase
* Use asyncio.Event in discovery task
* Use common keys in strings.json
* Bump pysqueezebox to v0.2.2 for fixed server discovery using python3.7
* Bump pysqueezebox version to v0.2.3
* Don't trap AbortFlow exception
Co-authored-by: J. Nick Koston <nick@koston.org>
* Refactor validate_input
* Update squeezebox tests
* Build data flow schema using function
* Fix linter error
* Updated en.json
* Update homeassistant/components/squeezebox/media_player.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/squeezebox/media_player.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/squeezebox/media_player.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/squeezebox/media_player.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update .coveragerc for squeezebox config flow test
* Mock TIMEOUT for faster testing
* More schema de-duplication and testing improvements
* Apply suggestions from code review
Co-authored-by: J. Nick Koston <nick@koston.org>
* Testing and config flow improvements
* Remove unused exceptions
* Remove deprecated logger message
* Update homeassistant/components/squeezebox/media_player.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Implement suggestions from code review
* Add async_unload_entry
* Use MockConfigEntry in squeezebox tests
* Remove unnecessary config schema
* Stop server discovery task when last config entry unloaded
* Improvements to async_unload_entry
* Fix bug in _discovery arguments
* Do not await server discovery in async_setup_entry
* Do not await start server discovery in async_setup
* Do not start server discovery from async_setup_entry until homeassistant running
* Re-detect players when server removed and re-added without restart
* Use entry.entry_id instead of unique_id
* Update unittests to avoid patching homeassistant code
Co-authored-by: J. Nick Koston <nick@koston.org>
* Refactor / update Awair integration
This commit does a few things, all in service of making the Awair
integration more modern and reliable. Specifically we do the following:
- Update to python_awair 0.1.1
- Begin using config entries / flow for setting up the integration.
- YAML support is completely removed.
- The integration now allows adding multiple Awair accounts, should a
user wish to do so (I found it _very_ useful in development).
- Group various Awair sensors into devices, using the device registry.
- Renames various sensors and treats the "dust" sensor as a particulate sensor.
- Device update rate-limits are no longer dynamically calculated; the
Awair API now separates rate-limits on a per-device basis.
- Supports sound pressure and illuminance sensors found on some Awair devices.
- We report the "awair index" for certain sensors as part of device_state_attributes.
The "index" is a subjective measure of whether or not a sensor reading
is "good" or "bad" (and to what extent). It's a component of the Awair
score, and it is useful on its own as an input for those who wish to
do things like "display this color if the value is 'bad'".
This is a breaking change, and requires updates to documentation and a
warning in the README. The breaking changes in detail, are:
- Support for all YAML configuration is removed, and users will need to
re-add the integration via the UI.
- We no longer support overriding device discovery via manual
configuration of device UUIDs. This was previously supported because
the Awair API had severe limits on the device list endpoints; however
those have since been removed.
- Gen 1 devices no longer show a "dust" sensor; rather we create a PM2.5
sensor and a PM10 sensor and just keep the values in sync. This better
reflects the sensor capabilities: it can detect particles in a range
from 2.5 -> 10, but cannot differentiate between sizes.
- Sensors are renamed as follows:
- "sensor.devicename_co2" -> "sensor.devicename_carbon_dioxide"
- "sensor.devicename_voc" -> "sensor.devicename_volatile_organic_compounds"
- "sensor.devicename_score" -> "sensor.devicename_air_quality_index"
- I've chosen to call the "Awair Score" an "air quality index" sensor,
because fundamentally the "Awair Score" and other air quality indices
(such as CAQI) do the same thing: they calculate a value based on a
variety of other inputs.
Under the hood, the integration has seen some improvements:
- We use the DataUpdateCoordinator class to handle updates, rather than
rolling our own update class.
- The code no longer tracks availability based on a timestamp returned
from the Awair service; we assert that if we have received a response
and the response has data for our device, then we are available (and
otherwise, not available). We don't need to test the actual Awair API
so heavily.
- Test coverage has been expanded to handle a variety of products that
Awair produces, not just the one I happen to own.
- Test coverage no longer concerns itself with testing behavior that is
now handled by the DataUpdateCoordinator; nor is it concerned with
ensuring that the overall component sets up and registers properly.
These are assumed to be well-tested functionaity of the core and not
things we need to re-test ourselves.
Finally - between library updates and integration updates, this
integration is well-positioned to support future updates. I have a
proof-of-concept patch for device automations, and the underlying
library now supports subclassing authentication (which clears the way
for us to use OAuth authentication for Awair).
* Wrap test fixture in mock_coro
Truthfully I'm not sure why this was passing on my local dev
environment, but I was developing with python 3.8 before. After
installing python 3.7, I was able to reproduce the CI failures and fix
them.
* Fix broken tests after #34901 and/or #34989
* Do not rename sensors so broadly
We're going to keep the sensors named as they were before, pending the
outcome of any decisions around the air_quality component and what names
should be standardized for air-quality-like devices.
If standardized names are selected (which does seem likely), then we
will update this integration to match them - at which point, it would be
a breaking change.
But for now, we'll keep names mostly identical to what users had before.
Notable in this commit is that we generate the entity_id ourselves,
rather than just allowing it to be auto-generated from the name
attribute. This allows us to provide more human friendly names, while
keeping the old format for entity ids. For example, given an Awair
device called "Living Room", we'll generate an entity id of
"sensor.living_room_voc" but show set the name of the device to "Living
Room Volatile organic compounds".
* Support import from config.yaml
We'll create a config entry from config.yaml the first time we're
loaded, and then defer to it from then on.
We ignore all keys other than the access_token, since we no longer need
to deal with per-account rate-limits (rather, everything is per-device
now).
* Add myself to CODEOWNERS
Since I wrote the initial integration, and now this re-write, it feels
appropriate for me to take care of the integration along with `danielsjf`.
* Remove name mangling
* Update homeassistant/components/awair/manifest.json
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/awair/config_flow.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/awair/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/awair/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Address some review feedback
* Set up reauth flow in a job, rather than awaiting
* Remove unnecessary title string
* Remove unnecessary config schema checking
As pointed out in review, because this comes in via import from
`configuration.yaml`, we can rely on the `PLATFORM_SCHEMA` validation instead.
* Fix tests
* Set unique_id appropriately for legacy devices
For users who have had this integration already installed (and who have
updated their home assistant installation sometime in recent history),
we want to ensure that unique_id's are set to the same thing as before,
to facilitate the upgrade process.
To do that, we add an additional property to the `SENSOR_TYPES` dict
(`ATTR_UNIQUE_ID`) which allows us to map modern sensor names from
python_awair to what older versions called them - ie: `humidity` ->
`HUMID`. We then use that value when constructing the unique ID. This
should allow users to upgrade and not lose configuration even if entity
IDs would otherwise change (because we have changed the name format that
generates entity IDs).
One note is that for the gen1 `DUST` sensor, we have to treat it
differently. This integration used to call that a "PM2.5" sensor, but
the unique_id generated would be something like `awair_12345_DUST`. So
we special-case that sensor, and do the same thing. We do not need to
special-case the PM10 sensor for gen1 devices, because we didn't create
a PM10 sensor in the past (we do now, because the "DUST" sensor is
really a hybrid PM2.5/PM10 sensor).
* Patch async_setup_entry for two tests
* Update awair config_flow to require / use an email address for unique_id
Also, only start one re-auth flow.
* Add a few more tests, try to get coverage up.
* Add another test
* Move attribution to device_state_attributes
* Don't require email
* Switch from Union[dict, None] to Optional[dict]
* Use a mock where requested
* Fix missing constant rename
* Use async_create_task
* Bump test coverage a bit for config_flow
* s/CONF_UNIQUE_ID/UNIQUE_ID/g
* Add warning about deprecated platform config
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add config_flow to the dunehd integration
* Add tests
* Run gen_requirements_all
* Fix pylint error
* Better hostname validation
* Build device info in the class
* Update plugwise async, config_flow and multi entity
* Update battery percentage
* Fix yamllint on services
* Fix yamllint on services
* Fix formatting for pyupgrade
* Update homeassistant/components/plugwise/__init__.py
Co-Authored-By: Robert Svensson <Kane610@users.noreply.github.com>
* Add try/except on setup
* Bump module version, battery version and valve position
* Removing sensor, switch, water_heater for later (child) PRs
* Catchup and version bump
* Remove title from strings.json
* Readd already reviewd await try/except
* Readd already reviewed config_flow
* Fix pylint
* Fix per 0.109 translations
* Remove unused import from merge
* Update plugwise async, config_flow and multi entity
* Update battery percentage
* Fix yamllint on services
* Fix yamllint on services
* Bump module version
* Bump module version, battery version and valve position
* Removing sensor, switch, water_heater for later (child) PRs
* Catchup and version bump
* Remove title from strings.json
* Fix pylint
* Fix per 0.109 translations
* Translations and config_flow, module version bump with required changes
* Translations and config_flow, module version bump with required changes
* Fix requirements
* Fix requirements
* Fix pylint
* Fix pylint
* Update homeassistant/components/plugwise/__init__.py
Improvement
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/plugwise/__init__.py
Improvement
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/plugwise/__init__.py
Improvement
Co-authored-by: J. Nick Koston <nick@koston.org>
* Include configentrynotready on import
* Update __init__.py
* DataUpdateCoordinator and comment non-PR-platforms
* Fix reqs
* Rename devices variable in favor of entities
* Rework updates with DataUpdateCoordinator
* Peer review
* Peer review second part
* Cleanup comments and redundant code
* Added required config_flow test
* Peer review third part
* Update service was replaced by DataUpdateCoordinator
* Corrected testing, version bump for InvalidAuth, move uniq_id
* Remove according to review
* Await connect (py38)
* Remove unneccesary code
* Show only when multiple
* Improve config_flow, rename consts
* Update homeassistant/components/plugwise/climate.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/plugwise/climate.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Process review comments
Co-authored-by: Robert Svensson <Kane610@users.noreply.github.com>
Co-authored-by: J. Nick Koston <nick@koston.org>
* Add support for Elexa Guardian water valve controllers
* Zeroconf + cleanup
* Sensors and services
* API registration
* Service bug fixes
* Fix bug in cleanup
* Tests and coverage
* Fix incorrect service description
* Bump aioguardian
* Bump aioguardian to 0.2.2
* Bump aioguardian to 0.2.3
* Proper entity inheritance
* Give device a proper name
* Code review
* First cut of Rollease Acmeda Pulse Hub integration.
* Acmeda integration improvements:
- Moved common code into a base entity
- Battery level sensor added
- Localisation now working
* Added requirement for aiopulse now that it has been uploaded to PyPI.
* Exclude acmeda integration from coverage check as it relies on a hub being present.
* Fix Travis CI build issues.
* Remove unused constants.
* Remove unused group logic from cover.py
* Removed commented code from base.py
* Remove sensors (battery entities) on removal of hub.
* Remove unused groups from sensor.py
* Acmeda device and entity update made fully asynchronous using subscriptions to remove need for config polling.
* Updated aiopulse version dependency.
Removed non-functional battery charging indication.
* Rationalised common code to update entities into helpers.py
* Fix linting issue.
* Correct additional CI pylint errors.
* Index config_entries by entry_id.
Move entity loading and unloading to __init__.py
Add entry_id to dispatcher signal
Removed now unused polling code hub
Added config_flow unit tests
* Tweak to integration config_entry title.
* Bumped aiopulse module to 0.3.2.
Reduced verbosity of aiopulse module.
* Changed to using direct write of device state.
Removed old style async_step_init config_flow step.
* Remove superfluous battery_level and device_state_attributes from battery entity.
* Removal of unused strings.
Removal of unused create_config_flow helper.
Removal of stale comment.
* Remove use of shared container to track existing enities.
Moved removal and deregistration of entities to base class through use of dispatch helper.
* Fixed strings.json
* Fix incorrect use of remove instead of pop on dict.
* Add support for tilting covers, bump aiopulse version number.
* Bump aiopulse version to v0.3.4.
Fixed bug in cover supported_features.
* Bumped aiopulse version to 0.4.0
Update acmeda .coveragerc exclusions
* Removed already configured hub check from __init__.py async_setup_entry
Removed passing in hass reference to base entity class
Renamed entity async_reset to async_will_remove_from_hass
Changed device_info and properties
Migrated to CoveEntity from CoverDevice
Added dispatched_connect cleanup on hub removal
Removed unused entries from manifest
Removed override of battery icon
Renamed translations folder
* Reversed unintended change to .coveragerc
* Fixed config flow for multi-hub discovery.
* Acmeda enhancements as requested by MartinHjelmare
* Force import to connect to hub to retrieve id prior to creating entry
* Remove YAML configuration support.
* Tidied up config_flow and tests:
- removed unnecessary steps
- fixed typos
* Removed storage of hub in config_flow.
* Add config flow to gogogate2 component.
* Using a more stable gogogate api.
* Getting config flows working better by using different downstream library.
* Fixing options not getting default values.
Adding availability to cover entity.
* Simplifying return types of function.
* Address PR feedback.
* Making user config flow not abort.
* Using DataUpdateCoordinator.
* Addressing PR feedback.
* Using standard method for using hass.data
* Split auth fail test into separate tests.
* Add config flow to pi-hole
* Add config flow tests
* Change PlatformNotReady to ConfigEntryNotReady
* Improve config flow
* Add @shenxn as codeowner
* Use entity_id as unique id
* Remove .get with [] for required fields
* Remove unique id from config flow
* Replace some strings with references
* Fix api_key string
* Fix service api_key check
* Remove unused DuplicatedNameException
* New forked_daapd component
* Bunch of changes
Add config flow and zeroconf
Add zones on callback when added by server
Add password auth
Add async_play_media for TTS
Add media_image_url
Add support for pipe control/input from librespot-java
Improve update callbacks
* Refactor as per code review suggestions
Move config_flow connection testing to pypi library (v0.1.4)
Remove use of ForkedDaapdData class
Decouple Master and Zone data and functions
Add updater class to manage websocket and entity updates
* More changes as per code review
Avoid direct access to entities in tests
Bump pypi version
Mark entities unavailable when websocket disconnected
Move config tests to test_config_flow
Move full url creation from media_image_url to library
Move updater entity from master to hass.data
Remove default unmute volume option
Remove name from config_flow
Remove storage of entities in hass.data
Use async_write_ha_state
Use signal to trigger update_options
Use unittest.mock instead of asynctest.mock
* Yet more changes as per code review
Add more assertions in tests
Avoid patching asyncio
Make off state require player state stopped
Only send update to existing zones
Split up some tests
Use events instead of async_block_till_done
Use sets instead of lists where applicable
Wait for pause callback before continuing TTS
* Remove unnecessary use of Future()
* Add pipes and playlists as sources
* Add support for multiple servers
Change config options to add max_playlists+remove use_pipe_control
Create Machine ID in test_connection and also get from zeroconf
Modify hass.data storage
Update host for known configurations
Use Machine ID in unique_ids, entity names, config title, signals
* Use entry_id as basis for multiple entries
* Use f-strings and str.format, abort for same host
* Clean up check for same host
* Add integration for wiffi devices
wiffi devices are DIY board manufactured by stall.biz.
Several devices are available, e.g. a weather station (weatherman), an
indoor environmental sensor (wiffi-wz) and some more.
This intgration has been developed using a weatherman device, but should
also work for other devices from stall.biz.
* Fix pylint warning
* Use WIFFI / STALL WIFFI instead of wiffi to be consistent with stall.biz
* Don't update disabled entities.
* fix complains
- move wiffi specific code to pypi
- remove yaml configuration code
* incorporate various suggestions from code review
* fix remaining comments from Martin
* fix comments
* add tests for config flow
* fix comments
* add missing requirements for tests
* fix pylint warnings
* fix comments
* fix comments
remove debug log
rename .translations to translations
* rebase and adapt to latest dev branch
* Update homeassistant/components/wiffi/config_flow.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/wiffi/config_flow.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* fix missing import
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* lutron_caseta: allow for multiple bridges; use config entries
Refactor to use config entries/flows, but only implemented import
(async_setup) flow handler for now.
* lutron_caseta: config_flow.py pylint hint
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* lutron_caseta: tweaks to __init__.py per PR feedback
* lutron_caseta: add config_flow tests
* lutron_caseta: verify connectivity to bridge
check connectivity before creating config entry; cleanup translation/strings
* lutron_caseta: allow for multiple bridges; use config entries
Refactor to use config entries/flows, but only implemented import
(async_setup) flow handler for now.
* lutron_caseta: config_flow.py pylint hint
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* lutron_caseta: tweaks to __init__.py per PR feedback
* lutron_caseta: add config_flow tests
* lutron_caseta: verify connectivity to bridge
check connectivity before creating config entry; cleanup translation/strings
* lutron_caseta: add error logging when exception is encountered checking connectivity
* lutron_caseta: tests mock bridge creation, not ha-side connectivity check
* lutron_caseta: catch more specific Error types while checking bridge conn.
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Initial commit for BSBLan Climate component
The most basic climate functions work.
* Delete manifest 2.json
wrongly added to commit
* fix incorrect name
current_hvac_mode
* update coverage to exclude bsblan
* sorted and add configflow
* removed unused code, etc
* fix hvac, preset mix up
now it sets hvac mode to none and preset to eco
* fix naming
* removed commented code and cleaned code that isn't needed
* Add test for the configflow
* Update requirements
fixing some issues in bsblan Lib
* Update coverage file to include configflow bsblan
* Fix hvac preset is not in hvac mode
rewrote how to handle presets.
* Add passkey option
My device had a passkey so I needed to push this functionality to do testing
* Update constants
include passkey and added some more for device indentification
* add passkey for configflow
* Fix use discovery_info instead of user_input
also added passkey
* Fix name
* Fix for discovery_info[CONF_PORT] is None
* Fix get value CONF_PORT
* Fix move translation to new location
* Fix get the right info
* Fix remove zeroconf and fix the code
* Add init for mockConfigEntry
* Fix removed zeroconfig and fix code
* Fix changed ClimateDevice to ClimatEntity
* Fix log error message
* Removed debug code
* Change name of device.
* Remove check
This is done in the configflow
* Remove period from logging message
* Update homeassistant/components/bsblan/strings.json
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add passkey
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add integration for Flick Electric NZ
* Start adding Config Flow and external API
* Second Wave of Config Flow and API implementation
* Fix test (errors is None instead of blank array?)
* Don't update sensor if price is still valid
* Add input validation
* Fix linting for DOMAIN
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Remove platform schema (config is by entries only)
* Don't catch AbortFlow exception
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update test
* Re-arrange try-catch in config flow
* Fix linting in sensor.py
* Staticly define list of components
* Fix test exceptions
* Fix _validate_input not being awaited
* Fix tests
* Fix pylint logger
* Rename test and remove print debug
* Add test for duplicate entry
* Don't format string in log function
* Add tests __init__ file
* Remove duplicate result assignment
* Add test for generic exception handling
* Move translations folder
* Simplify testing
* Fix strings/translation
* Move to "flick_electric" as domain
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* ISY994 Add Config and Options Flow
Add tests for config flow
Fix test
Update Tests
* Fix merge errors
* Update homeassistant/components/isy994/strings.json
Co-authored-by: J. Nick Koston <nick@koston.org>
* Apply suggestions from code review
Co-authored-by: J. Nick Koston <nick@koston.org>
* Fix patching in tests to not actually start Home Assistant
Co-authored-by: J. Nick Koston <nick@koston.org>
* Initial version.
* Tests.
* Refactored tests.
* Update requirements_all
* Increase test coverage. Catch exception.
* Update .coveragerc
* Fix lint msg.
* Tweak test (more to force CI build).
* Update based on PR comments.
* Change unique_id to use stable string.
* Add Universal Powerline Bus "link" support.
* Fix missed call.
* Revert botched merge.
* Update homeassistant/components/upb/light.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Three changes.
Update service schema to require one of brightness/brightness_pct.
Fix bug in setting brightness to zero.
Replace async_update_status and replace with async_update.
Co-authored-by: J. Nick Koston <nick@koston.org>
* Add config flow to songpal
* Add config flow to songpal
* Add songpal to migrated service in discovery
* Improve songpal/set_sound_setting service
* Remove songpal config flow from .coveragerc omit
* Bump python-songpal to 0.12 and fix exception handling
* Revert "Improve songpal/set_sound_setting service"
This reverts commit 9be076ab52e21f268322572c36709a17d41db771.
* Code style fix
* Add connections to device_info
* Fix pylint
* Ignore braava tv
* Fix test warning
* Add @shenxn as codeowner
* Remove model from configuration data
* Get name from device in user step
* Add unload entry support
* Delete translations as it will get generated as part of CI
* Code cleanup
* Fix typo
* Remove _show_setup_form
* Change configuration from media_player to songpal
Co-authored-by: Raman Gupta <7243222+raman325@users.noreply.github.com>
* Config flow for homekit
Allows multiple homekit bridges to run
HAP-python state is now stored at .storage/homekit.{entry_id}.state
aids is now stored at .storage/homekit.{entry_id}.aids
Overcomes 150 device limit by supporting
multiple bridges.
Name and port are now automatically allocated
to avoid conflicts which was one of the main
reasons pairing failed.
YAML configuration remains available in order to offer entity
specific configuration.
Entries created by config flow can add and remove
included domains and entities without having to restart
* Fix services as there are multiple now
* migrate in executor
* drop title from strings
* Update homeassistant/components/homekit/strings.json
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Make auto_start advanced mode only, add coverage
* put back title
* more references
* delete port since manual config is no longer needed
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Add Islamic Prayer Times config_flow
* Add Islamic Prayer Times config_flow
* handle options update and fix tests
* fix sensor update handling
* fix pylint
* fix scheduled update and add test
* update test_init
* update flow options to show drop list
* clean up code
* async scheduling and revert state to timestamp
* fix update retry method
* update strings
* keep title as root key
* Updating the panasonic_viera component
* Updating .coveragerc
* Removing testplatform
* Updating strings.json
* Commit before rebase
* Commit before rebase
* Commit before rebase
* Commit before rebase
* Commit before rebase
* Adding tests and stuff
* Fixing permission issues
* Ignoring Pylint warnings
* Fixing one more Pylint warning
* Refactoring
* Commiting changes - part 1
* Commiting changes: part 2
* Turning unknown error logs into exception logs
* Update strings.json
* Rebasing
* Updating the panasonic_viera component
* Removing testplatform
* Updating strings.json
* Commit before rebase
* Commit before rebase
* Commit before rebase
* Commit before rebase
* Commit before rebase
* Adding tests and stuff
* Fixing permission issues
* Ignoring Pylint warnings
* Fixing one more Pylint warning
* Refactoring
* Commiting changes - part 1
* Commiting changes: part 2
* Turning unknown error logs into exception logs
* Adding pt-BR translation
* Removing Brazilian Portugues translations
* Modifying error handling
* Adding SOAPError to except handling
* Updating translation
* Refactoring async_step_import
* Fixing indentation
* Fixing requirements after rebase
* Fixing translations
* Fixing issues after rebase
* Routing import step to user step
* Adding myself as a codeowner
* add config flow to nws and remove yaml
* Don't duplicate scan_time
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Use _abort_if_unique_id_configured
Co-Authored-By: J. Nick Koston <nick@koston.org>
* fix abort
* Add unavailable tests
* update and use better strings
* lint
Co-authored-by: J. Nick Koston <nick@koston.org>
* Run scripts
* Improvement strings
* Fix FlowOptions update listener
* Update .ceveragerc
* Add tests
* Better strings
* Add test for OptionsFlow
* Run gen_requirements_all.py once again
* Fix pylint errors
* Log error when there is no bravia.conf file during import
* Improvement strings
* Use braviarc object from hass.data in options flow
* Use async_add_executor_job for IO
* Fix options flow test
* Fix tests
* Remove host_reachable method
* Remove dependencies
* Change setup_platform method to async
* Remove calling system_info
* Save mac in the config entry
* Fix get ignore sources
* Fix read config from file
* Remove the side effect from init
* Fix user_input for user step
* Switch OrderedDict to dict
* New config_entry instance for each test
* Revert change
* Patch async_setup_entry in test_import
* Change a way to create source list
* Consolidate repeated block of code
* Update tests
* Suggested change
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Suggested channge
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Suggested change
* Patch async_setup_entry
* Remove unnecesary if
* suggested change
* Suggested change
* Fix tests
* Fix pylint error
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Bump skybellpy to 0.4.0
* Bump skybellpy to 0.4.0 in requirements_all.txt
* Added extra states for STATE_ALARM_TRIGGERED to allow users to know if
it is a burglar or fire or carbon monoxide so automations can take
appropriate actions. Updated TotalConnect component to handle these new
states.
* Fix const import
* Fix const import
* Fix const imports
* Bump total-connect-client to 0.26.
* Catch details of alarm trigger in state attributes.
Also bumps total_connect_client to 0.27.
* Change state_attributes() to device_state_attributes()
* Move totalconnect component toward being a multi-platform integration. Bump total_connect_client to 0.28.
* add missing total-connect alarm state mappings
* Made recommended changes of MartinHjelmare at
https://github.com/home-assistant/home-assistant/pull/24427
* Update __init__.py
* Updates per MartinHjelmare comments
* flake8/pydocstyle fixes
* removed . at end of log message
* added blank line between logging and voluptuous
* more fixes
* Adding totalconnect zones as HA binary_sensors
* fix manifest.json
* flake8/pydocstyle fixes. Added codeowner.
* Update formatting per @springstan guidance.
* Fixed pylint
* Add zone ID to log message for easier troubleshooting
* Account for bypassed zones in update()
* More status handling fixes.
* Fixed flake8 error
* Another attempt at black/isort fixes.
* Bump total-connect-client to 0.50. Simplify code using new functions in
total-connect-client package instead of importing constants. Run black
and isort.
* Fix manifest file
* Another manifest fix
* one more manifest fix
* more manifest changes.
* sync up
* fix indent
* one more pylint fix
* Hopefully the last pylint fix
* make variable names understandable
* create and fill dict in one step
* Fix name and attributes
* rename to logical variable in alarm_control_panel
* Remove location_name from alarm_control_panel attributes since it is
already the name of the alarm.
* Multiple fixes to improve code per @springstan suggestions
* Update homeassistant/components/totalconnect/binary_sensor.py
Co-Authored-By: springstan <46536646+springstan@users.noreply.github.com>
* Multiple changes per @MartinHjelmare review
* simplify alarm adding
* Fix binary_sensor.py is_on
* Move DOMAIN to .const in line with examples.
* Move to async_setup
* Simplify code using new features of total-connect-client 0.51
* First crack at config flow for totalconnect
* bump totalconnect to 0.52
* use client.is_logged_in() to avoid total-connect-client details.
* updated generated/config_flow.py
* use is_logged_in()
* Hopefully final touches for config flow
* Add tests for config flow
* Updated requirements for test
* Fixes to test_config_flow
* Removed leftover comments and code
* fix const.py flake8 error
* Simplify text per @Kane610 https://github.com/home-assistant/home-assistant/pull/32126#pullrequestreview-364652949
* Remove .get() to speed things up since the required items should always
be available.
* Move CONF_USERNAME and CONF_PASSWORD into .const to eliminate extra I/O
to import from homeassistant.const
* Fix I/O async issues
* Fix flake8 and black errors
* Mock the I/O in tests.
* Fix isort error
* Empty commit to re-start azure pipelines (per discord)
* bump total-connect-client to 0.53
* Update homeassistant/components/totalconnect/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/totalconnect/config_flow.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Fixes per @balloob comments
* Fix imports
* fix isort error
* Fix async_unload_entry
It still referenced CONF_USERNAME instead of entry.entity_id
* Added async_setup so not breaking change. Fixed imports.
* Update tests/components/totalconnect/test_config_flow.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Remove TotalConnectSystem() per @MartinHjelmare suggestion
* Moved from is_logged_in() to is_valid_credentials()
The second is more accurate for what we are checking for, because is_logged_in() could return False due to connection error.
* Fix import in test
* remove commented code and decorator
* Update tests/components/totalconnect/test_config_flow.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* fix test_config_flow.py
* bump total-connect-client to 0.54
* remove un-needed import of mock_coro
* bump to total-connect-client 0.54.1
* re-add CONFIG_SCHEMA
* disable pylint on line 10 to avoid pylint bug
Co-authored-by: springstan <46536646+springstan@users.noreply.github.com>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add config_flow for roomba
* Get options to connect
* Fix options in config flow
* Fix syntax in config_flow
* Remove name (not necessary)
* Add bin sensor
* Add Battery sensor
* Add async_connect
* Fix typo
* Add Model and Software version
* Update Roombapy 1.5.0
* Add validate_input
* Add connect and disconnect functions
* Remove test config flow
* Add variables after loop
* Fix translate
* Fix typo
* Fix state of bin
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Remove invalid auth
* Add call function reported_state
* Add options reload
* Fix tracelog
* Set entry_id for config_entry
* Fix DOMAIN unsed-import
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Add unique_id for entry
* Fix device info
* Add config_flow for roomba
* Get options to connect
* Fix options in config flow
* Fix syntax in config_flow
* Remove name (not necessary)
* Add bin sensor
* Add Battery sensor
* Add async_connect
* Fix typo
* Add Model and Software version
* Update Roombapy 1.5.0
* Add validate_input
* Add connect and disconnect functions
* Remove test config flow
* Add variables after loop
* Fix translate
* Fix typo
* Fix state of bin
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Remove invalid auth
* Add call function reported_state
* Add options reload
* Fix tracelog
* Set entry_id for config_entry
* Fix DOMAIN unsed-import
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/config_flow.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Add unique_id for entry
* Fix device info
* syntax for mac (pyupgrade)
* Change single key to BLID
* Resolve dict conflict
* Update homeassistant/components/roomba/binary_sensor.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/sensor.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/.translations/en.json
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/strings.json
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Add description
* Revert "Remove test config flow"
This reverts commit 26a89422e8.
* Add tests
* Remove check if user none
* Replace CONF_USERNAME to CONF_BLID (breaking change)
* Update test_config_flow.py
* Add code owners
* Remove CONF_USERNAME (unused)
* Add multiple vacuum
* Add multiple vacuum
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Fix syntax name
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Remove CONF_PREFIX (unused)
* Update homeassistant/components/roomba/sensor.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Add import UNIT_PERCENTAGE
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/roomba/__init__.py
Co-Authored-By: J. Nick Koston <nick@koston.org>
Co-authored-by: J. Nick Koston <nick@koston.org>
* Add a config flow for flume
* Sensors no longer block Home Assistant startup
since the flume api can take > 60s to respond on
the first poll
* Update to 0.4.0 to resolve the blocking startup issue
* Missed conversion to FlumeAuth
* FlumeAuth can do i/o if the token is expired, wrap it
* workaround async_add_entities updating disabled entities
* Fix conflict
* Add config flow to Synology DSM
* Use proper sensor unique ID from flow + sensor name
* Add description to api_version
* Add authentication flow check
* Add device_info
* Add test_login_failed test
* Bump python-synology to 0.5.0
* 0.5.0 test updates
* Use NAS S/N as config_flow unique_id
* Add missed conf disks + volumes
* Review: async_unload the async_track_time_interval
* Fix NoneType for disks or volumes
* Keep all disks and volumes forever
* Update homeassistant/components/synology_dsm/.translations/en.json
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/synology_dsm/strings.json
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Fix "Keep all disks and volumes forever" for empty import
* Fix prettier
* Remove useless LOGGER in config flow
* Fix Synology DSM tests doing I/O
Co-authored-by: J. Nick Koston <nick@koston.org>
* Adding vera config entries support.
* Fixing lint error.
* Applying minimal changes necessary to get config entries working.
* Addressing PR feedback by further reducing the scope of the change.
* Addressing PR feedback.
* Fixing pyvera import to make it easier to patch.
Addressing PR feedback regarding creation of controller and scheduling of async config flow actions.
* Updating code owners file.
* Small fixes.
* Adding a user config flow step.
* Adding optional configs for user config flow.
* Updating strings to be more clear to the user.
* Adding options flow.
Fixing some PR feedback.
* Better handling of options.
PR feedback changes.
* Using config registry to update config options.
* Better managing config from file or config from UI
Disabling config through UI if config is provided from a file.
More tests to account for these adjustments.
* Address PR feedback.
* Fixing test, merging with master.
* Disabling all Vera UI for configs managed by configuration.yml.
Adding more tests.
* Updating config based on unique_id.
Addressing additional PR feedback.
* Rebasing off dev.
Addressing feedback.
* Addressing PR feedback.
* Convert nut to config flow
* Add a test for importing
* lint
* Address review items (part 1)
* Address review items (part 1)
* Cleanup unique id handling
* Update tests for new naming scheme
* No unique id, no device_info
* Remove sensor types
* Update tests to use resources that still exist
* Create __init__.py
* Create manifest.json
* Update zeroconf.py
* more work on integration
* more work on integration.
* add more sensor tests.
* Update const.py
* Update sensor.py
* more work on ipp.
* Update test_config_flow.py
* more work on ipp.
* Update config_flow.py
* Update config_flow.py
* Config flow for elkm1
* As entity ids can now be changed, the “alarm_control_panel”
attribute “changed_by_entity_id” is now “changed_by_keypad”
and will show the name of the Elk keypad instead of the entity id.
* An auto configure mode has been introduced which avoids the
need to setup the complex include and exclude filters. This
functionality still exists when configuring from yaml for power
users who want more control over which entities elkm1 generates.
* restore _has_all_unique_prefixes
* preserve legacy behavior of creating alarm_control_panels that have no linked keypads when auto_configure is False
* unroll loop
Rob Bierbooms
tkdrob
Oliver Acevedo
Chris Talkington
Robert Van Gorkom
Xiaonan Shen
AJ Schmidt
Evgeny
Arda ŞEREMET
Andrew Marks
Leonardo Figueiro
Paulus Schoutsen
On Freund
Felipe Martins Diel
Graham Wetzler
Greg Dowling
Tom Harris
Jc2k
David F. Mulcahey
Marcio Granzotto Rodrigues
Quentame
Aidan Timson
Peter Nijssen
James Hilliard
Maciej Bieniek
Adam Król
lawtancool
jduquennoy
Ville Skyttä
Eugene Prystupa
Baptiste Candellier
Gage Benne
Haemish Kyd
Oscar Calvo
rajlaud
starkillerOG
Andrew Hayworth
bsmappee
Ian Harcombe
Tom Schneider
Rami Mosleh
Joakim Plate
Tim van Cann
Aaron Bach
Tom
Martin Hjelmare
Daniel Høyer Iversen
Alan Murray
Franck Nijhof
Kevin Fronczak
uvjustin
Steffen Zimmermann
Emily Mills
Chris Aljoudi
ollo69
Willem-Jan
Brynley McDonald
shbatm
Glenn Waters
sean tearney
Jesse Hills
Markus Bong
gadgetmobile
David Straub
Jason Hunter
J. Nick Koston
MatsNl
escoand
João Gabriel
MatthewFlamm
Austin Mroczek
Save me