* Add prettier (in pre-commit and CI)
* Make all file prettier
* Change order
* Add to Azure Pipelines
* Fix a YAML file prettier caught as invalid
* Remove flow mapping using curly braces from all YAML service files
* Adding support for PTZ move modes
Adding support for other PTZ move modes.
Onvif intergration used to only support RelativeMove where it should also supports AbsoluteMove, ContinuousMove and Stop.
For exemple Goke GK7102 based IP camera only support ContinuousMove mode.
This commit add those new modes with avaibility to select mode and params in service call.
* Adding support for PTZ move modes
Adding support for other PTZ move modes.
Onvif intergration used to only support RelativeMove where it should also supports AbsoluteMove, ContinuousMove and Stop.
For exemple Goke GK7102 based IP camera only support ContinuousMove mode.
Update service helper for new avaibility to select mode and params in service call.
* RelativeMode as default move_mode to avoid breakchange
RelativeMode as default move_mode to avoid breakchange
* add missing attribute
add missing continuous_duration attribute
* change service attribute label for continuous_duration
* update description
fix wrong assertion for move_mode attr description
* Update services.yaml
* Update services.yaml
fix wrong wording for move_mode
* Update camera.py
Using defined constants instead of raw strings in conditions
* Update camera.py
Replace integer to floating point in logger debug PTZ values
* Update services.yaml
* Update services.yaml
* Update camera.py
* Update camera.py
* use dict[key] for required schema keys and keys with default schema values
* remove async for setup_ptz method
* lint error
* remove unecessary PTZ_NONE = "NONE"
changed request by @MartinHjelmare
* addressing @ MartinHjelmare comments
- Remove None in defaluts and dicts
- Replace long if blocks
* remove NONE
* lint issue
* Update camera.py
* Fix lint error - typo
* rename onvif_ptz service to just ptz
* rename onvif_ptz service to just ptz
* use dict[key] when default values are set
use service.data[key] instead of service.data.get[key] when default value is set in service schema
* adresse comment: use dict[key] for pan tilt zoom
* Apply suggestions from code review
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* update service domain for local_file from camera to local_file
* remove service.yaml entry in camera component as part of change
* fix test
* move constants to const.py
* add local_file/const.py to .coveragerc
* remove local_file/const.py from .coveragerc since component has tests
* Logi Circle now uses OAuth2 for authentication, added config flow.
* Service calls now dispatched to camera entities via signalled events
* Update from PR review
* Add unit tests for config flow
* Updated CODEOWNERS
* Reverted change to .coveragerc
* Improved test coverage of config flow
* initial commit of streams
* refactor stream component
* refactor so stream formats are not considered a platform
* initial test and minor refactor
* fix linting
* update requirements
* need av in tests as well
* fix import in class def vs method
* fix travis and docker builds
* address code review comments
* fix logger, add stream start/stop logs, listen to HASS stop
* address additional code review comments
* beef up tests
* fix tests
* fix lint
* add stream_source to onvif camera
* address pr comments
* add keepalive to camera play_stream service
* remove keepalive and move import
* implement registry and have output provider remove itself from stream after idle, set libav log level to error
* Added Logi Circle platform, camera and sensor
* Integrated with Logo Circle API’s feature detection to exclude sensors not supported by device. Added services for recording livestream and taking a snapshot from the livestream.
* Migrated livestream snapshot and recording functionality out of home assistant components and into the logi circle API wrapper. Added services.yaml entries for logi services.
* Added new Logi sensor types, updated to latest version of `logi_circle` and tidy up in preparation for pull request.
- Renamed `logi_set_mode` to `logi_set_config`.
- Live stream recording and snapshot methods now respect whitelisted path configuration.
- Added `streaming_mode` and `speaker_volume` sensors.
- Moved model-specific turn on/off logic to `logi_circle` library.
* Renamed `logi` component domain to `logi_circle`.
* Updates based on PR feedback
* Added timeout of 15s to logi_circle initial setup requests (login and grabbing cameras).
* Added unique ID (uses MAC address for camera platform, MAC address + sensor type for sensor platform).
* Added battery level and battery charging attributes to camera.
* Removed static attributes from device_state_attributes.
* Replaced STATE_UNKNOWN with None, replaced ‘on’ & ‘off’ with STATE_ON and STATE_OFF.
* Removed redundant SCAN_INTERVAL in sensor, removed redundant hass param from async_setup_platform in camera and sensor.
* Style tweaks.
* Replaced `asyncio.wait_for` with `async_timeout` to be consistent with other components.
* Add turn_on/off to camera
* Add turn_on/off supported features to camera.
Add turn_on/off service implementation to camera, add turn_on/off
supported features and services to Demo camera.
* Add camera supported_features tests
* Resolve code review comment
* Fix unit test
* Use async_add_executor_job
* Address review comment, change DemoCamera to local push
* Rewrite tests/components/camera/test_demo
* raise HTTPError instead return response
* Service PTZ added
* Removed description loading during setup
* Fixed hound issues
* Changed attribute names
* Fixed pylint error
* Cleaning up the code
* Changed access to protected member to dict
* Removed new line added by mistake
* Fixed pylint error
* Fixed minors
* Fixed pylint caused by usage of create_type function
* Code made more concise
* Fixed string intendation problem
* Service name changed
* Update code to fit with the new version
* Set ptz to None if PTZ setup failed
* more precise exception used
* Added camera service calls to arm/disarm the cameras. Entity id is optional so that with a single call we can arm all the cameras or specify a particular entity id to arm if applicable and possible in that camera type.
* Added camera service calls to arm/disarm the cameras. Entity id is optional so that with a single call we can arm all the cameras or specify a particular entity id to arm if applicable and possible in that camera type.
* Added camera service calls to arm/disarm the cameras. Entity id is optional so that with a single call we can arm all the cameras or specify a particular entity id to arm if applicable and possible in that camera type.
* Fixed the spaces and indentation related issues that houndci found
* Fixed the spaces and indentation related issues that houndci found
* Missed the const file which has the macros defined.
* Fixed the CI build error
* Fixed the CI build error because of unused variable in exception case
* Updating the arlo code based on comment from @balloob. Changed the arm and disarm to enable_motion_detection and disable_motion_detection respectively. Similarly fixed the AttributeError handling. Added dummy code to the demo camera also. Moved out the definitions in const.py into the camera __init__ file
* Fixed the comments posted by houndci-bot
* Fixed the comments posted by houndci-bot
* Fixed the comments posted by houndci-bot
* Fixed the comments posted by travis-ci integration bot
* Fixed the comments posted by travis-ci integration bot
* Fixed the comments posted by travis-ci integration bot for demo.py: expected 2 lines, found 1
* Updated code in camera __init__.py to use the get function instead of directly calling the member in the structure.
* Updated code in camera __init__.py
* Posting the updated code for PR based on @balloob's suggestions/recommendations
* Removed the arlo reference from demo code. Copy-paste error
* Removed the unused import found by hound bot
* Expected 2 lines before function, but found only 1.
* Based on @balloob's comments, moved these constants to the camera/arlo.py
* Added test_demo.py to test the motion enabled and motion disabled in camera component
* Fixing issues found by houndci-bot
* Fixing issues found by houndci-bot
* Fixing the code as per @balloob's suggestions
* Fixing the code as per @balloob's suggestions
* Fixing the test_demo failure. Tried to rewrite a base function to enable the motion in __init__.py and missed to add it to as a job.
* Fixing the hound bot comment
* Update arlo.py
* Update arlo.py
tkdrob
Franck Nijhof
Cooper Dale
olijouve
Raman Gupta
Evan Bruhn
Paulus Schoutsen
Jason Hunter
Jason Hu
Robin
karlkar
Fabian Affolter
Pascal Vizeli
viswa-swami