* Changing z-wave brightness calculation to respect 0x01 and 0x02 byte
values
* adding additional line breaks to satisfy houndci
* - Update comment style for linter
- Add additional unit test to increase code coverage
* Update zwave.py
* Allow only_cache parameter in zha.safe_read()
* Use cache_only for binary_sensor.zha initial update.
* Use cache_only for fan.zha initial update.
* Use cache_only for sensor.zha initial update.
* Use cache_only for switch.zha initial update.
* Use cache_only for light.zha initial update.
* Refactor cached only read in zha platform.
* Allow device registry to optionally store config entries
* Connections and identifiers are now sets with tupels
* Make config entries mandatory
* Fix duplicate keys in test
* Rename device to device_info
* Entity platform should only create device entries if config_entry_id exists
* Fix Soundtouch tests
* Revert soundtouch to use self.device
* Fix baloobs comments
* Correct type in test
* First draft
* Generate device id
* No obscure registry
* Dont store config_entry_id in device
* Storage
* Small mistake on rebase
* Do storage more like entity registry
* Improve device identification
* Add tests
* Remove deconz device support from PR
* Fix hound comments, voff!
* Fix comments and clean up
* Fix proper indentation
* Fix pydoc issues
* Fix mochad component to not use self.device
* Fix mochad light platform to not use self.device
* Fix TankUtilitySensor to not use self.device
* Fix Soundtouch to not use self.device
* Fix Plex to not use self.device
* Fix Emby to not use self.device
* Fix Heatmiser to not use self.device
* Fix Wemo lights to not use self.device
* Fix Lifx to not use self.device
* Fix Radiotherm to not use self.device
* Fix Juicenet to not use self.device
* Fix Qwikswitch to not use self.device
* Fix Xiaomi miio to not use self.device
* Fix Nest to not use self.device
* Fix Tellduslive to not use self.device
* Fix Knx to not use self.device
* Clean up a small mistake in soundtouch
* Fix comment from Ballob
* Fix bad indentation
* Fix indentatin
* Lint
* Remove unused variable
* Lint
* Implement X10
* Add X10 after add_device_callback
* Ref device by id not hex and add x10OnOffSwitch name
* X10 services and add sensor device
* Correctly reference X10_HOUSECODE_SCHEMA
* Log adding of X10 devices
* Add X10 All Units Off, All Lights On and All Lights Off devices
* Correct ref to X10 states vs devices
* Add X10 All Units Off, All Lights On and All Lights Off devices
* Correct X10 config
* Debug x10 device additions
* Config x10 from bool to housecode char
* Pass PLM to X10 device create
* Remove PLM to call to add_x10_device
* Unconfuse x10 config and method names
* Correct spelling of x10_all_lights_off_housecode
* Bump insteonplm to 0.10.0 to support X10
* Add host to config options
* Add username and password to config for hub connectivity
* Add username and password to config for hub
* Convert port to int if host is defined
* Add KeypadLinc
* Update config schema to require either port or host
* Solidify Hub and PLM configuration to ensure proper settings
* Update hub schema
* Bump insteonplm version
* Fix pylint and flake issues
* Bump insteonplm to 0.12.1
* Merge insteon_plm and insteon_local to insteon
* Rename insteon_plm to insteon
* Bump insteonplm to 0.12.2
* Flake8 cleanup
* Update .coveragerc for insteon_plm, insteon_local and insteon changes
* Add persistent notification
* Fix reference to insteon_plm
* Fix indentation
* Shorten message and fix grammer
* Add comment to remove in release 0.90
* Hound fix
* remove velbus fan and light platforms
these platforms should not be there since they can be created with template components based on switch platform
* use latest version of python-velbus which supports auto-discovery of modules
* fix linting errors
* fix linting errors
* fix linting errors
* address review comments from @MartinHjelmare
* update based on automatic feedback
* fix linting errors
* update dependency
* syntax corrections
* fix lint warning
* split out common functionality in VelbusEntity
use sync methods for loading platforms
support unique_ids so that entities are registred in entity registry
* fix linting errors
* fix linting errors
* fix linting errors
* integrate review comments (common functionality in VelbusEntity class)
* rename DOMAIN import to VELBUS_DOMAIN
* revert change created by requirements script
* regen
* Initial commit for deCONZ switch support
* Fix hound comment
* Fix martins comment; platforms shouldn't depend on another platform
* Fix existing tests
* New tests
* Clean up unnecessary methods
* Bump requirement to v43
* Added device state attributes to light
* Remember last brightness value and use it on turn_on()
* Pyfnip-0.2 now returns state reliably, no manual changes needed.
* Split too long line of code
* Updated pyfnip library version
* Add a component for Sisyphus Kinetic Art Tables
The [Sisyphus Kinetic Art Table](https://sisyphus-industries.com/) uses a
steel ball to draw intricate patterns in sand, thrown into sharp relief by a
ring of LED lights around the outside.
This component enables basic control of these tables through Home Assistant.
* Fix lints
* Docstrings, other lints
* More lints
* Yet more.
* Feedback
* Lint
* Missed one piece of feedback
* - Use async_added_to_hass in media player
- async_schedule_update_ha_state in listeners
- constants for supported features
- subscripting for required keys
- asyncio.wait
- update to sisyphus-control with passed-in session
* Update requirements
* lint
* Add context
* Add context to switch/light services
* Test set_state API
* Lint
* Fix tests
* Do not include context yet in comparison
* Do not pass in loop
* Fix Z-Wave tests
* Add websocket test without user
* Added support for FutureNow light platform and relay/dimmer units
* Pinned specific version for requirement
* Added support for FutureNow light platform and relay/dimmer units
* Added futurenow.py to .coveragerc.
* Minor fixes and enhancements as requested in the code review.
* Minor fixes and enhancements as requested in the code review.
* Use device_config's value directly as it's validated as boolean.
* Simplify state check.
* Fixed brightness update that was broken in previous commit.
* Allow defining default turn-on values for lights in the profiles file.
* Mock out file operations in unit test.
* Fix unit test flakiness.
* Avoid unnecessary copy
* light.tplink: initialize min & max mireds only once, avoid i/o outside update
* revert the index change
* fix indent, sorry for overwriting your fix, balloob
## Description:
More fixes flagged by pylint 2 that don't hurt to have before the actual pylint 2 upgrade (which I'll submit soon).
## Checklist:
- [ ] The code change is tested and works locally.
- [x] Local tests pass with `tox`. **Your PR cannot be merged unless tests pass**
* Update to next version with enum states
* Change to generic dimmer class
* Update of requirement files
* Update to hmip lib to v0.9.7
* Missing update of requirements files
* Cleanup of icon properties
* Fix ZWave RGBW lights not producing color without explicit white_value (#13930)
* simplify conditional in previous commit (#13930)
* ZwaveColorLight - only zero _white if white_value not specified in call (#13930)
* Add HomematicIP Cloud to config flow
* Inititial trial for config_flow
* Integrations text files
* Load and write config_flow and init homematicip_cloud
* Split into dedicated files
* Ceanup of text messages
* Working config_flow
* Move imports inside a function
* Enable laoding even no accesspoints are defined
* Revert unnecassary changes in CONFIG_SCHEMA
* Better error handling
* fix flask8
* Migration to async for token generation
* A few fixes
* Simplify config_flow
* Bump version to 9.6 with renamed package
* Requirements file
* First fixes after review
* Implement async_step_import
* Cleanup for Config Flow
* First tests for homematicip_cloud setup
* Remove config_flow tests
* Really remove all things
* Fix comment
* Update picture
* Add support for async_setup_entry to switch and climate platform
* Update path of the config_flow picture
* Refactoring for better tesability
* Further tests implemented
* Move 3th party lib inside function
* Fix lint
* Update requirments_test_all.txt file
* UPdate of requirments_test_all.txt did not work
* Furder cleanup in websocket connection
* Remove a test for the hap
* Revert "Remove a test for the hap"
This reverts commit 968d58cba1.
* First tests implemented for config_flow
* Fix lint
* Rework of client registration process
* Implemented tests for config_flow 100% coverage
* Cleanup
* Cleanup comments and code
* Try to fix import problem
* Add homematicip to the test env requirements
Previous commit d4f7dfa successfully fixed the bug in which lights
would not turn off if a transition was specified, however if 'bri' is not
present in the payload of the PUT request set to deCONZ, then any
'transitiontime' ends up being ignored. This commit addresses the
unintended side effect by reintroducing 'bri', resulting in the following
payload:
{ "on": false, "bri": 0, "transitiontime": ... }
When light.turn_off is invoked with a transition, the following payload was
sent to deCONZ via PUT to /light/N/state:
{ "bri": 0, "transitiontime": transition }
However, on recent versions of deCONZ (latest is 2.05.31 at the time of
writing) this does not turn off the light, just sets it to minimum brightness
level (brightness is clamped to minimum level the light supports without
turning it off).
This commit makes the code send this payload instead:
{ "on": false, "transitiontime": transition }
This works as intended and the light does transition to the 'off' state.
This change was tested with Philips Hue colored lights, IKEA colored lights
and IKEA white spectrum lights: they were all able to be turned off
successfully with the new payload, and none of them could be turned off with
the old payload.
* Address inconsistent behavior between different controllers.
Correct issue with comparison that was preventing white value slider from being shown.
* Add white mode for Flux LED
* Call _bulb.turnOn() after bulb properties have been set to prevent immediate on action
* Only use existing brightness if rgb is None to prevent unexpected recalculation of passed rgb values.
* Remove blank line
* Undo change so current brightness is used in all cases.
* Fix MQTT Light with RGB and Brightness
When an MQTT light is given an RGB and Brightness topic, the RGB
is scaled by the brightness *as well* as the brightness being set
This causes 255,0,0 at 50% brightness to be sent as 127,0,0 at 50%
brightness, which ends up as 63,0,0 after the RGB bulb has applied
its brightness scaling.
Fixes the same issue in mqtt, mqtt-json and mqtt-template.
Related Issue: #13725
* Add comment to mqtt_json as well
* Expose Wemo component availability to home assistant
* Do not add availability feature to dimmer - it works differently
* Brain fade, deleted completely the wrong thing.
Revert "Do not add availability feature to dimmer - it works differently"
This reverts commit f64e717981.
* (2nd attempt) Do not add availability feature to dimmer - it works differently
* Added platform lw12wifi for Lagute LW-12 Wifi Lights
Supported features:
* RGB colors
* Variable brightness
* 29 effects
* Changing transitions speed for animated effects
* Added lw12wifi to the list of omitted files to test
* Added lw12 module as new requirement for lw12wifi platform
* Added configuration example docstring for platform lw12wifi
* Updating code according to review in PR:
* Removed unused imports: enum, socket.
* Unused and not imported feature SUPPORT_FLASH was removed.
* Unused import lw12 in setup_platform method removed.
* Fixed indention for valuptuous.
* Changed check if effect is None.
* Removed personal debug output.
* Blocking function are not async anymore.
* Further improvements to satisfy PR.
* Unused import asyncio removed.
* Fixed: Return value and docstring no match up for `assumed_state`.
* Check if the set effect is supported, otherwise revert to normal light.
* Added describing missing docstrings to all functions.
* Adopted code to work with HS color setting.
* Syntactical change in comment.
* Removed redefinition of DOMAIN.
* Refactored lw12 controller setup: removed requirement for host and port in LW12Wifi class.
* Rewritten supported feature setup to a more static expression.
* Removed unused rgb_color property
* Fixed typo in comment for set_light_option
* Changed RGB option validation schema
* Removed instance properties as config options
* Removed optional settings to be more inline with code style.
* Removed unused option from config example
* Removal of unused import
* Added property to disable state polling for this entity.
* Raise an exception if an unknown effect was selected.
* Fixed an issue with the check for known effects.
* As we do not need to set a default, use simple accessing by key.
* Log if an unknown effect was selected.
* Added link to future documentation.
* Simplify conditionals.
* Send white_value on service call.
* Remove extra blank line
* Further simplification of conditionals
* Requested changes
* Do not call getRgb if not needed
* Update log message
* Make mysensors component async
* Use async dispatcher and discovery.
* Run I/O in executor.
* Make mysensors actuator methods async.
* Upgrade pymysensors to 0.13.0.
* Use async serial gateway.
* Use async TCP gateway.
* Use async mqtt gateway.
* Start gateway before hass start event
* Make sure gateway is started after discovery of persistent devices
and after corresponding platforms have been loaded.
* Don't wait to start gateway until after hass start.
* Bump pymysensors to 0.14.0
* Add support for shutter contact and motion detector device
* Add support for power switch devices
* Add support for light switch device
* Cleanup binary_switch and light platform
* Update comment
* Setup all-linking service
* Remove extra line
* Remove linefeed and tab escape chars
* Add services delete_all_link, load_all_link_database and print_all_link_database
* Check if reload is set
* Confirm entity is InsteonPLMEntity before attempting to load or print ALDB
* Debug load and print ALDB
* Debug print aldb
* Debug print_aldb
* Get entity via platform
* Track Insteon entities in component
* Store entity list in hass.data
* Add entity to hass.data
* Add ref to hass in InsteonPLMEntity
* Pass hass correctly to InsteonPLMBinarySensor
* Fix reference to ALDBStatus.PARTIAL
* Print ALDB record as string
* Get ALDB record from memory address
* Reformat ALDB log output
* Add print_im_aldb service
* Remove reference to self in print_aldb_to_log
* Remove reference to self in print_aldb_to_log
* Fix spelling issue with load_all_link_database service
* Bump insteonplm to 0.9.1
* Changes from code review
* Code review changes
* Fix syntax error
* Correct reference to cv.boolean and update requirements
* Update requirements
* Fix flake8 errors
* Reload as boolean test
* Remove hass from entity init
* Add new device without restarting hass
* Remove debug prints
* Fix copy paste error
* Fix comments from balloob
Add tests to verify signalling with new added devices
* Fix hound comments
Add test to verify when new sensor is added
* Fix tests
* Unload entry should unsubscribe all deconz dispatchers
* Make sure mock setup also creates unsub in hass data
* Fix copy paste issue
* Lint
* Allow independent control of white level on flux_led component.
Also preserve brightness on color change.
* Limit white value support to RGBW mode.
* Requested changes.
* Correct liniting issues
* Formatting
Eufy device state isn't reported if the bulb is off, so avoid stamping on
the previous values if the bulb isn't going to give us useful information.
In addition, improve handling of bulb turn on if we aren't provided with a
brightness - this should avoid the bulb tending to end up with a brightness of
1 after power cycling.
* Use forward entry setup with light platform
* Move sensor to forward entry setup
* Use forward entry setup with binary sensors
* Use forward entry setup with scene platform
* Remove import of unused functionality
* Move deconz setup in to setup entry
Create initial negative tests for setup entry
* Fix hound comment
* Improved tests
* Add test for scene platform
* Add test for binary sensor platform
* Add test for light platform
* Add test for light platform
* Add test for sensor platform
* Fix hound comment
* More asserts on sensor types
* Fix up Eufy handling of colour lights
The Eufy colour lights have separate colour and temperature modes, and give
much less light output when in colour mode. Brightness is also handled in
a slightly confusing way, which means that state must be maintained in
order to avoid switching the light between modes by accident. Add some
additional handling for that.
* Bump the lakeside version
This version has important bugfixes for colour bulbs.
* Hound fixes
* Add support for controlling homekit lights and switches
This adds support for controlling lights and switches that expose a HomeKit
control interface, avoiding the requirement to implement protocol-specific
components.
* Comment out the homekit requirement
This needs to build native code, so leave it commented for now
* Review updates
* Make HomeKit auto-discovery optional
Add an "enable" argument to the discovery component and add a list of
optional devices types (currently just HomeKit) to discover
* Further review comments
* Update requirements_all.txt
* Fix houndci complaints
* Further review updates
* Final review fixup
* Lint fixups
* Fix discovery tests
* Further review updates
* Add support for Eufy bulbs and switches
Add support for driving bulbs and switches from the Eufy range.
* Fix hound checks
* Satisfy pylint
* Handle review comments
* Review updates and test fixes
* PyLint is a bit too aggressive
With AbodePy 0.12.3, dimmers will now work but a conversion of the brightness is required. Additionally, when a brightness value of 100 is sent to Abode, 99 is returned causing AbodePy to throw an error so this component will send 99 instead of 100.
Keeps the brightness value sent and returned from the device response consistent. However, during initialization and when a device refresh is received, Abode can return 100 thus we'll convert that case back to 99.
* Handle turn_on situation when no color is set
As is, an error gets thrown when turn_on is called without an HS value. By adding an if statement, we only try to set RGB if an HS value is applied.
* Fix Whitespace Issues
* Made Requested Changes
* unique_ids for tradfri lights and groups
* set color temperature on CWS bulb
Cannot set_color_temp on color bulb, needs conversion from mired to hsb
* make travis happy
* change condition so we ensure color bulbs are included, change comments.
* New service added to control the power mode of the yeelight
* Debug output removed.
* Strict validation of the available power modes
* Service description added
* Service parameter name fixed
* Accept and report both xy and RGB color for lights
* Fix demo light supported_features
* Add new XY color util functions
* Always make color changes available as xy and RGB
* Always expose color as RGB and XY
* Consolidate color supported_features
* Test fixes
* Additional test fix
* Use hue/sat as the hass core color interface
* Tests updates
* Assume MQTT RGB devices need full RGB brightness
* Convert new platforms
* More migration
* Use float for HS API
* Fix backwards conversion for KNX lights
* Adjust limitless min saturation for new scale
* phue -> aiohue
* Clean up
* Fix config
* Address comments
* Typo
* Fix rebase error
* Mark light as unavailable when bridge is disconnected
* Tests
* Make Throttle work with double delay and async
* Rework update logic
* Don't resolve host to IP
* Clarify comment
* No longer do unnecessary updates
* Add more doc
* Another comment update
* Wrap up tests
* Lint
* Fix tests
* PyLint does not like mix 'n match async and coroutine
* Lint
* Update aiohue to 1.2
* Lint
* Fix await MagicMock
* Xiaomi Philips Eyecare Smart Lamp 2 support added.
* Blank lines removed.
* Pylint errors fixed.
* Abstract light introduced.
* Smart night light mode renamed.
* Use the conventional power on/off methods again.
* Eyecare mode service added.
* Eyecare mode attribute added.
* Name of the ambient light entity fixed.
* Reuse of the same local variable name within the same scope fixed.
* Use Async / await syntax.
* Missed method fixed.
* Make hound happy.
* Don't abuse the system property supported_features anymore.
* Make hound happy.
* Wrong hanging indentation fixed.
Unnecessary parens after 'return' keyword fixed.
* Refactoring.
* Additional supported features bit mask removed as long as the differences of the supported devices are simple.
* Support for Xiaomi Philips Zhirui Smart LED Bulb E14 Candle Lamp added.
* Docstrings updated.
Refactoring.
* Unique id added.
* Filter service calls. Dummy methods removed.
* Device available handling improved.
* super() used for calling the parent class
* Self removed from super().
* Refactor Google Assistant
* Fix cloud test
* Fix supported features media player demo
* Fix query
* Fix execute
* Fix demo media player tests
* Add tests for traits
* Lint
* Lint
* Add integration tests
* Add more tests
* update logging
* Catch out of range temp errrors
* Fix cloud error
* Lint
* Make color_name_to_rgb raise
* Add Light Set Color intent
* Move some methods around
* Cleanup
* Prevent 1 more func call
* Make a generic Set intent for light
* Lint
* lint
* Unavailable state introduced if the device isn't reachable.
A new configuration option "model" can be used to define the device type.
```
light:
- platform: xiaomi_miio
name: Xiaomi Philips Smart LED Ball
host: 192.168.130.67
token: da548d86f55996413d82eea94279d2ff
# Bypass of the device model detection.
# Optional but required to add an unavailable device
model: philips.light.bulb
```
New attribute "scene" and "delay_off_countdown" added.
New service xiaomi_miio_set_delay_off introduced.
* Service xiaomi_miio_set_delayed_turn_off updated. The attribute "delayed_turn_off" is a timestamp now.
* None must be a valid model.
* Math.
* Microseconds removed because of the low resolution.
* Comment updated.
* Update the ATTR_DELAYED_TURN_OFF on a deviation of 4 seconds (max latency) only.
* Import of datetime fixed.
* Typo fixed.
* pylint issues fixed.
* Naming.
* Service parameter renamed.
* New ceiling lamp model (philips.light.zyceiling) added.
* Use positive timedelta instead of seconds.
* Use a unique data key per domain.
* Merge from current dev
* Update for Sensor approach
* Update reference to state classes
* Reference stateKey correctly
* Reference stateKey
* Change deviceInfo to a dict
* Pass state to properties method
* Add state info to device_state_attributes
* Update entity name to include state name
* Update for on() off() vs light_on/off
* Flag newnames option
* Update configuration schema
* Update configuration schema
* Spell False correctly
* Rename state to statekey
* Rename statekey to stateKey
* Call new device with stateKey and newname
* Simplify use of newnames
* Add workdir to save devices
* Fix newnames config setup
* Propogate OnOffSensor to VariableSensor change
* Upgrade insteonplm version to 0.8.0
* Pass address rather than device object to platform
* Set inteon_plm data variable to PLM
* Consistant use of conn and plm
* Consistant use of conn and plm
* Proper reference to device and address
* Fixed platform setup issues
* Correct issue with missing _supported_features attr
* Properly reference self._state vs self.state
* Bump insteonplm version to 0.8.1
* Remove subplatform and map based on state name
* Correct refrence to State
* Correct reference to device.states
* Bump insteonplm to 0.8.2
* Fix format errors
* Fix format issues
* Fix trailing whitespace
* Correct format issues
* Fix format issues
* Fix format issues
* Fixed format issues
* Fixed format issues
* Move imports inside classes
* Simplify import of modules
* Correct reference to OnOffSwitch_OutletTop and bottom
* Remove unnessary references
* Fix format issues
* Code review adjustments
* Fix format issue
* Use new nameing format for groups that are not group 0x01
* Remove newname feature
* Fix binary_sensor type to default to None
* Fix device_class property to return the sensor type correctly.
* rename _device and _state to avoid conflicts with Entity
* Format long lines
* Pylint clean up
* Insteon_PLM
* lint cleanup
* Check device_override has address
* 3.4 lint clean up
* Changes per code review
* Change discovered from a list of dict to a dict
* Correct common_attributes usage
* Change discovered from a list of dict to a dict
* Add debugging message to confirm platform setup
* Debug messages
* Debug messages
* Debug async_added_to_hass
* Debug async_added_to_hass async_add_job
* Debug async_added_to_hass
* Debug devices not loading in hass
* Debug new entities not being added to hass
* Debug adding devices to hass
* Revert "3.4 lint clean up"
This reverts commit 0d8fb992b1.
* 3.4 lint clean up
* Revert "Debug adding devices to hass"
This reverts commit ec306773d4.
* Revert "Debug new entities not being added to hass"
This reverts commit 55fb724d06.
* Revert "Debug devices not loading in hass"
This reverts commit 07814b4f14.
* Revert "Debug async_added_to_hass"
This reverts commit 4963a255d8.
* Revert "Debug async_added_to_hass async_add_job"
This reverts commit 22cadff91f.
* Revert "Debug async_added_to_hass"
This reverts commit 12c5651fe4.
* Pylint clean up
* pylint cleanup
* Clean up naming
* Enhance config schema. Fix logging issue
* Reapply changes after squash
* Improve service by allowing to reference entity id instead of deconz id
* Change from having access to full entities to only store entity id together with deconz id
* Don't use eval, there is a dict type for voluptuous
* Use entity registry instead of keeping a local registry over entity ids
* Removed old code
* Add test for get_entry
* Bump dependency to v28
Fixed call to protected member
* Use chain to iterate over dict values
* Cleanup
* Fix hound comment
* Cleanup
* Follow refactoring of entity
* Revert to using a local registry
* Remove unused import
* self.hass is automatically available when entity is registered in hass
* Upgrade pylint to 1.8.1
* Fix no-else-return
* Fix bad-whitespace
* Fix too-many-nested-blocks
* Fix raising-format-tuple
See https://github.com/PyCQA/pylint/blob/master/doc/whatsnew/1.8.rst
* Fix len-as-condition
* Fix logging-not-lazy
Not sure about that TEMP_CELSIUS though, but internally it's probably just like if you concatenated any other (variable) string
* Fix stop-iteration-return
* Fix useless-super-delegation
* Fix trailing-comma-tuple
Both of these seem to simply be bugs:
* Nest: The value of self._humidity never seems to be used anywhere
* Dovado: The called API method seems to expect a "normal" number
* Fix redefined-argument-from-local
* Fix consider-using-enumerate
* Fix wrong-import-order
* Fix arguments-differ
* Fix missed no-else-return
* Fix no-member and related
* Fix signatures-differ
* Revert "Upgrade pylint to 1.8.1"
This reverts commit af78aa00f125a7d34add97b9d50c14db48412211.
* Fix arguments-differ
* except for device_tracker
* Cleanup
* Fix test using positional argument
* Fix line too long
I forgot to run flake8 - shame on me... 🙃
* Fix bad-option-value for 1.6.5
* Fix arguments-differ for device_tracker
* Upgrade pylint to 1.8.2
* 👕 Fix missed no-member
Greg Laabs
Robert Svensson
Paulus Schoutsen
Zoé Bőle
Alexei Chetroi
Nikolay Kasyanov
Sören Oldag
Harvtronix
Anders Melchiorsen
Maciej Bieniek
Ville Skyttä
Tom Harris
Sebastian Muszynski
Fabian Affolter
Paulus Schoutsen
Max Prokhorov
Thomas Delaet
Juha Niemi
Jonathan Keljo
Jens Østergaard Nielsen
Daniel Kalmar
Teemu R
Mattias Welponer
huangyupeng
Jason Antman
cdce8p
Leonardo Brondani Schenkel
Matt Snyder
Adam Mills
Martin Hjelmare
Bob Clough
Thibault Cohen
gstorer
Hate-Usernames
austinlg96
Julian Knauer
Marco Orovecchia
Diogo Gomes
William Scanlon
damarco
Otto Winter
Matthew Garrett
Kerwin Bryant
Khole
Johann Kellerman
shred86
Niklas Wagner
Lewis Juggins
dramamoose
NovapaX
Lewis Juggins
Lindsay Ward
a-andre
Per Osbäck
Maximilien Cuony
Jesse Hills
Julius Mittenzwei
rubenverhoef
Andrey
Slava
Russell Cloran