* Add bangolufsen integration
* add untested files to .coveragerc
* Simplify integration to media_player platform
* Remove missing files from .coveragerc
* Add beolink_set_relative_volume custom service
Tweaks
* Remove custom services
Remove grouping as it was dependent on custom services
* Update API to 3.2.1.150.0
Reduce and optimize code with feedback from joostlek
Tweaks
* Updated testing
* Remove unused options schema
* Fix bugfix setting wrong state
* Fix wrong initial state
* Bump API
* Fix Beosound Level not reconnecting properly
* Remove unused constant
* Fix wrong variable checked to determine source
* Update integration with feedback from emontnemery
* Update integration with feedback from emontnemery
* Remove unused code
* Move API client into dataclass
Fix not all config_flow exceptions caught
Tweaks
* Add Bang & Olufsen brand
* Revert "Add Bang & Olufsen brand"
This reverts commit 57b2722078.
* Remove volume options from setup
Simplify device checks
rename integration to bang_olufsen
update tests to pass
Update API
* Remove _device from base
Add _device to websocket
* Move SW version device update to websocket
Sort websocket variables
* Add WebSocket connection test
* Remove unused constants
* Remove confirmation form
Make discovered devices get added to Home Assistant immediately
Fix device not being available on mdns discovery
Change config flow aborts to forms with error
* Update tests for new config_flow
Add missing api_exception test
* Restrict manual and discovered IP addresses to IPv4
* Re-add confirmation step for zeroconf discovery
Improve error messages
Move exception mapping dict to module level
* Enable remote control WebSocket listener
* Update tests
* Mark home_plus_control a virtual integration using Netatmo
* Apply code review suggestion
Co-authored-by: Robert Resch <robert@resch.dev>
---------
Co-authored-by: Robert Resch <robert@resch.dev>
* Adding initial Epion Air integration logic
* Skipping sensors with missing data
* Patching Epion integration
* Adding additional Epion measurement types
* Cleaning up logging
* Cleaning up code
* Fixing error handling for invalid Epion keys
* Adding tests and improving error handling
* Patching Epion tests
* Cleaning up Epion integration code
* Bumping Epion package and including missing files
* Moving data updates to coordinator and addressing feedback
* Improve exception handling
* Exposing model name and firmware version
* Cleaning up code according to review
* Cleaning up code according to review
* Adding check to prevent duplicate account setup
* Refactoring tests and checking for duplicates
* Cleaning up test code according to review
* Cleaning up test code
* Removing entity name overrides
* Fix code format for tests
* Adding missing newlines in JSON files
* Fixing formatting
* Updating device method to always return a device
* Updating coordinator
* First checkin for myUplink
* Refactored coordinator and sensor state classe
* Updated .coveragerc
* Update test_config_flow
* Fix test_config_flow for myuplink
* Only set state class for temperature sensor
* PR comment updates
* Type strong dict
* use asyncio.timeouts
* PR updates (part 1)
* Updated to myuplink 0.0.9
* Add strict typing
* Fix typing
* Inherit CoordinatorEntity
* Clean up coordinator and sensors
* Use common base entity
* Improve device point sensor
* Exclude entity from coverage
* Set device point entity name if there's no entity description
* Update homeassistant/components/myuplink/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/myuplink/entity.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/myuplink/entity.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Remvoed firmware + connstate sensors
* Always add device point parameter name
* Removed MyUplinkDeviceSensor
* Removed unused class
* key="celsius",
---------
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add new Rabbit Air integration
* Remove py.typed file
It is not needed and was just accidentally added to the commit.
* Enable strict type checking for rabbitair component
Keeping the code fully type hinted is a good idea.
* Add missing type annotations
* Remove translation file
* Prevent data to be added to hass.data if refresh fails
* Reload the config entry when the options change
* Add missing type parameters for generics
* Avoid using assert in production code
* Move zeroconf to optional dependencies
* Remove unnecessary logging
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Remove unused keys from the manifest
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Replace property with attr
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Allow to return None for power
The type of the is_on property now allows this.
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Remove unnecessary method call
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Update the python library
The new version properly re-exports names from the package root.
* Remove options flow
Scan interval should not be part of integration configuration. This was
the only option, so the options flow can be fully removed.
* Replace properties with attrs
* Remove multiline ternary operator
* Use NamedTuple for hass.data
* Remove unused logger variable
* Move async_setup_entry up in the file
* Adjust debouncer settings to use request_refresh
* Prevent status updates during the cooldown period
* Move device polling code to the update coordinator
* Fix the problem with the switch jumping back and forth
The UI seems to have a timeout of 2 seconds somewhere, which is just a
little bit less than what we normally need to get an updated state. So
the power switch would jump to its previous state and then immediately
return to the new state.
* Update the python library
The new version fixes errors when multiple requests are executed
simultaneously.
* Fix incorrect check for pending call in debouncer
This caused the polling to stop.
* Fix tests
* Update .coveragerc to exclude new file.
* Remove test for Options Flow.
* Update the existing entry when device access details change
* Add Zeroconf discovery step
* Fix tests
The ZeroconfServiceInfo constructor now requires one more argument.
* Fix typing for CoordinatorEntity
* Fix signature of async_turn_on
* Fix depreciation warnings
* Fix manifest formatting
* Fix warning about debouncer typing
relates to 5ae5ae5392
* Wait for config entry platform forwards
* Apply some of the suggested changes
* Do not put the MAC address in the title. Use a fixed title instead.
* Do not format the MAC to use as a unique ID.
* Do not catch exceptions in _async_update_data().
* Remove unused _entry field in the base entity class.
* Use the standard attribute self._attr_is_on to keep the power state.
* Store the MAC in the config entry data
* Change the order of except clauses
OSError is an ancestor class of TimeoutError, so TimeoutError should be
handled first
* Fix depreciation warnings
* Fix tests
The ZeroconfServiceInfo constructor arguments have changed.
* Fix DeviceInfo import
* Rename the method to make it clearer what it does
* Apply suggestions from code review
* Fix tests
* Change speed/mode logic to use is_on from the base class
* A zero value is more appropriate than None
since None means "unknown", but we actually know that the speed is zero
when the power is off.
---------
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Add Hong Kong Observatory integration
* Move coordinator to a separate file
* Map icons to conditions
* Fix code for review
* Skip name
* Add typings to data_coordinator
* Some small fixes
* Rename coordinator.py
* Add config flow to Streamlabs water
* Add config flow to Streamlabs water
* Add config flow to Streamlabs water
* Add issue when import is successful
* Remove import issue when entry already exists
* Remove import issue when entry already exists
* Fix feedback
* Fix feedback
---------
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* initial work on alarm
* final work on alarm
* coveragerc
* add tests
* add code validation
* remove sensor changes for a dedicated PR
* code optimization and cleanup
* tweaks
* tweak #2
* apply suggestion
* code quality
* code quality #2
* fix cover.py
* api typing
* use base classes where possibile
* apply const as per review comment
* cleanup unload entry
* apply review comments
* Add config flow to Netgear LTE
* uno mas
* uno mas
* forgot one
* uno mas
* uno mas
* apply suggestions
* tweak user step
* fix load/unload/dep
* clean up
* fix tests
* test yaml before importing
* uno mas
* uno mas
* uno mas
* uno mas
* uno mas
* fix startup hanging
* break out yaml import
* fix doc string
---------
Co-authored-by: Robert Resch <robert@resch.dev>
* Skeleton for Vogel's MotionMount support.
* Generated updates.
* Add validation of the discovered information.
* Add manual configuration
* Use a mac address as a unique id
* Add tests for config_flow
* Add a 'turn' sensor entity.
* Add all needed sensors.
* Add number and select entity for control of MotionMount
* Update based on development checklist
* Preset selector now updates when a preset is chosen
* Fix adding presets selector to device
* Remove irrelevant TODO
* Bump python-MotionMount requirement
* Invert direction of turn slider
* Prepare for PR
* Make sure entities have correct values when created
* Use device's mac address as unique id for entities.
* Fix missing files in .coveragerc
* Remove typing ignore from device library.
Improved typing also gave rise to the need to improve the callback mechanism
* Improve typing
* Convert property to shorthand form
* Remove unneeded CONF_NAME in ConfigEntry
* Add small comment
* Refresh coordinator on notification from MotionMount
* Use translation for entity
* Bump python-MotionMount
* Raise `ConfigEntryNotReady` when connect fails
* Use local variable
* Improve exception handling
* Reduce duplicate code
* Make better use of constants
* Remove unneeded callback
* Remove other occurrence of unneeded callback
* Improve removal of suffix
* Catch 'getaddrinfo' exception
* Add config flow tests for invalid hostname
* Abort if device with same hostname is already configured
* Make sure we connect to a device with the same unique id as configured
* Convert function names to snake_case
* Remove unneeded commented-out code
* Use tuple
* Make us of config_entry id when mac is missing
* Prevent update of entities when nothing changed
* Don't store data in `hass.data` until we know we will proceed
* Remove coordinator
* Handle situation where mac is EMPTY_MAC
* Disable polling
* Fix failing hassfest
* Avoid calling unique-id-less discovery handler for situations where we've an unique id
* add config flow
* unit tests
* yaml config import flow
* change deprecation period and simply code
* keep name for legacy yaml
- removing the name now would break current implementations
- it will be removed together with the deprectation of yaml config flow
* improve error handling, simpler unique_id, cleanup
* simplify issues for yaml import flow
* improve typing and clean name handling
* streamline unit tests
- happy path + errors
- mock opendata instead of aiohttp
* parametrize unit tests
* improve strings
* add missing aborts
* update coverage ignore
* remove redundant test
* minor clean up of constants
* Add config flow to Suez water
* fix tests
* Complete coverage
* Change version to 2024.7
* Fix final test
* Add issue when import is successful
* Move hassdata
* Do unique_id
* Remove import issue when entry already exists
* Remove import issue when entry already exists
* Add OSO Energy integration
* Add min/max for v40 level and bump pyosoenergyapi to 1.0.2
* OSO Energy address review comments
* Bump pyosoenergyapi to 1.0.3 and remove scan interval
* Remove unnecessary code
* Update homeassistant/components/osoenergy/__init__.py
Co-authored-by: Daniel Hjelseth Høyer <mail@dahoiv.net>
* Fixes to latest version
* Add support to set temperature
* Update homeassistant/components/osoenergy/config_flow.py
Co-authored-by: Daniel Hjelseth Høyer <mail@dahoiv.net>
* Fixes after review
* Remove unused code
* Add support for translations and modify services
* Apply suggestions from code review
Co-authored-by: Robert Resch <robert@resch.dev>
* Refactor services and constants according to the PR suggestions
* Remove unnecessary code
* Remove unused import in constants
* Refactoring and support for multiple instances
* Apply suggestions from code review
Co-authored-by: Robert Resch <robert@resch.dev>
* Refactor code and apply review suggestions
* Bump pyosoenergyapi to 1.0.5
* Remove services to reduce initial PR
* Remove extra state attributes and make OSO Entity generic
---------
Co-authored-by: Daniel Hjelseth Høyer <github@dahoiv.net>
Co-authored-by: Daniel Hjelseth Høyer <mail@dahoiv.net>
Co-authored-by: Robert Resch <robert@resch.dev>
* * Nobø Ecohub select entities
- Week profiles
- Global overrides
* Set integration_type
* Typing
* Remove translations
* Translation fixes
- Moved strings.select.json into strings.json
- Added translation keys for select entities
- Use shared translation keys for global override states
* Use DeviceInfo object
* Revert temperature name - uses device class name
* Fix updated checks
* Improve error handling (preparing for Silver level)
* Review
Markus Jacobsen
Jan-Philipp Benecke
Dave Leaver
Robert Resch
RJPoelstra
Joost Lekkerkerker
Aaron Bach
Leendert Gravendeel
G Johansson
Peter Winkler
Matrix
Phil Bruckner
Álvaro Fernández Rojas
jimmyd-be
Alexander Somov
MisterCommand
Guy Shefer
Cyrill Raccaud
Simone Chemelli
Tobias Perschon
Robert Hillis
Kristof Mariën
ashionky
J. Nick Koston
Nikolay Vasilchuk
yangbo
osohotwateriot
Franck Nijhof
Jonas Fors Lellky
Teemu R
mkmer
Isak Nyberg
Christopher Fenner
Øyvind Matheson Wergeland