* Make mysensors component async
* Use async dispatcher and discovery.
* Run I/O in executor.
* Make mysensors actuator methods async.
* Upgrade pymysensors to 0.13.0.
* Use async serial gateway.
* Use async TCP gateway.
* Use async mqtt gateway.
* Start gateway before hass start event
* Make sure gateway is started after discovery of persistent devices
and after corresponding platforms have been loaded.
* Don't wait to start gateway until after hass start.
* Bump pymysensors to 0.14.0
* Gogogate2 - bump version
Uses latest version of library which ensures commands to device are idempotent
* Update requirements_all
* Expose sensor temperature
* update version
* import attribute
* Set temperature
* Remove temperature attribute
Removed temperature attribute until it can be re-implemented as a separate sensor.
* Update ordering
* Fix copy-&-paste issue
* add 2 devices
io:RollerShutterUnoIOComponent
io:ExteriorVenetianBlindIOComponent
* add 2 devices
* Update tahoma.py
* Fix hounci-bot violation
* Fixed Travis CI build failure
./homeassistant/components/cover/tahoma.py:83:13: E125 continuation line with same indent as next logical line
* Fixed Travis CI build failure
E125 continuation line with same indent as next logical line
* Fixed Travis CI build failure
E127 continuation line over-indented for visual indent
* Fix indent
* Change check
* Use 0/1 for GPIO writes rather than true/false
GPIO pins don't appear to respond to true/false writes, and this is reflected in code elsewhere. For example, in `\components\switch\rpio_gpio.py` the following code is used:
```
def turn_on(self, **kwargs):
"""Turn the device on."""
rpi_gpio.write_output(self._port, 0 if self._invert_logic else 1)
self._state = True
self.schedule_update_ha_state()
```
This code works. Hence this PR uses 0/1 in the raspberry pi GPIO cover, instead of true/false.
* Update rpi_gpio.py
* Upgrade pylint to 1.8.1
* Fix no-else-return
* Fix bad-whitespace
* Fix too-many-nested-blocks
* Fix raising-format-tuple
See https://github.com/PyCQA/pylint/blob/master/doc/whatsnew/1.8.rst
* Fix len-as-condition
* Fix logging-not-lazy
Not sure about that TEMP_CELSIUS though, but internally it's probably just like if you concatenated any other (variable) string
* Fix stop-iteration-return
* Fix useless-super-delegation
* Fix trailing-comma-tuple
Both of these seem to simply be bugs:
* Nest: The value of self._humidity never seems to be used anywhere
* Dovado: The called API method seems to expect a "normal" number
* Fix redefined-argument-from-local
* Fix consider-using-enumerate
* Fix wrong-import-order
* Fix arguments-differ
* Fix missed no-else-return
* Fix no-member and related
* Fix signatures-differ
* Revert "Upgrade pylint to 1.8.1"
This reverts commit af78aa00f125a7d34add97b9d50c14db48412211.
* Fix arguments-differ
* except for device_tracker
* Cleanup
* Fix test using positional argument
* Fix line too long
I forgot to run flake8 - shame on me... 🙃
* Fix bad-option-value for 1.6.5
* Fix arguments-differ for device_tracker
* Upgrade pylint to 1.8.2
* 👕 Fix missed no-member
* Entity#unique_id defaults to None
* Initial commit entity registry
* Clean up unique_id property
* Lint
* Add tests to entity component
* Lint
* Restore some unique ids
* Spelling
* Remove use of IP address for unique ID
* Add tests
* Add tests
* Fix tests
* Add some docs
* Add one more test
* Fix new test…
* added unavailability tracker, updated sensor component
* change hass argument position according to position in binary_sensor
* added hass argument to binary_sensor, updated is_on(), it can be UNAVAILABLE now
* updated switch component to support unavailability feature
* updated light component to support unavailability feature
* updated cover component to support unavailability feature
* set _hass property
* added unavailability tracker, updated sensor component
* change hass argument position according to position in binary_sensor
* added hass argument to binary_sensor, updated is_on(), it can be UNAVAILABLE now
* updated switch component to support unavailability feature
* updated light component to support unavailability feature
* updated cover component to support unavailability feature
* set _hass property
* fixed error with wrong arguments number during callback call
* reset unavailability state on new message received from device
* use locks to fix race condition during managing _state property
* overriden state() method for some components to check for STATE_UNAVAILABLE and return it instead e.g. STATE_OFF
* fixed linter
* removed blank line
* use available() method instead of changing _state
* filter motion sensors 'heartbeat', was removed from PyXiaomiGateway
* remove self._hass, use self.hass set by HA on attach
* self.push_data now running in the event loop, use async_schedule_update_ha_state()
* merge fix
* removed accidentally added home-assistant-polymer
* bump PyXiaomiGateway version to 0.8.0
* bump PyXiaomiGateway to 0.8.0
* updated methods names and annotations
* add pyhomematic support for ip and tiltable covers
* use cached data in current_cover_tilt_position
* check for existance not for None
* reformatting
* check node for LEVEL_2
* Strip off the RTS/IO ID from the entity ID
* Ignore exception thrown when the device does not provide an active state
* Send actions with a label for easier identification in the Tahoma log
* Linting
* Strip off the RTS/IO ID from the entity ID, take 2
As per suggestions, let HA do the standard initialization and assign
an appropriate entity_id, instead of overriding it with the lengthy
unique_id coming from the TaHoma devices.
* Adding support for Lutron Radio RA2 shades as cover components.
* Adding initial version of the Lutron shades component.
* Fixed line-length violation detected by Hound.
* Deprecate explicit entity_id in template platforms
* Use config validator for deprecation
* Fix copy/paste typos
* Also print the config value
* Add test for config validator
* Assert the module name that logged the message
* Lazy loading of service descriptions
* Fix tests
* Load YAML in executor
* Return a copy of available services to allow mutations
* Remove lint
* Add zha/services.yaml
* Only cache descriptions for known services
* Remove lint
* Remove description loading during service registration
* Remove description parameter from async_register
* Test async_get_all_descriptions
* Remove lint
* Fix typos from multi-edit
* Remove unused arguments
* Remove unused import os
* Remove unused import os, part 2
* Remove unneeded coroutine decorator
* Only use executor for loading files
* Cleanups suggested in review
* Increase test coverage
* Fix races in existing tests
* Issue #11432: Do not stop initializing KNX when tunelling device cant be reached
* Issue #11432: Mark devices as unavailable if gateway cant be connected
ArrayLabs
Paulus Schoutsen
Otto Winter
guillaume1410
Aaron Bach
Martin Hjelmare
David Broadfoot
m4dmin
Thijs de Jong
Fabian Affolter
Chris Jones
Tod Schmidt
cdce8p
Julius Mittenzwei
Scott Bradshaw
Anders Melchiorsen
Otto Winter
Ville Skyttä
William Scanlon
Paul Annekov
Steaff
Giuseppe
Nicko van Someren
Daniel Høyer Iversen
Dan Nixon