* Add On/Off as target values for stop cover
Certain ZWave Cover devices use On/Off instead of the more common
Open/Close and Up/Down targets for movement.
Adding On/Off to the targets used to stop the cover during movement.
Fixes issue #51963
* Add test for updated zwave_js stop cover logic
* Initial support for zwave_js device triggers
* lint
* Add node status changed trigger
* comments
* create helper function and simplify trigger logic
* simplify code
* fix exception
* remove unused type ignore
* switch to append to make future changes easier
* make exception consistent
* Add state config schema validation
* comment
* remove 0 from falsy check
* increase test coverage
* typos
* Add central scene and scene activation value notification triggers
* reorder things for readability and enumerate node statuses
* Add support for Basic CC value notifications
* fix schemas since additional fields on triggers aren't very flexible
* pylint
* remove extra logger statement
* fix comment
* dont use get when we know key will be available in dict
* tweak text
* use better schema for required extra fields that are ints
* rename trigger types to make them easier to parse
* fix strings
* missed renaming of one trigger type
* typo
* Fix strings
* reduce complexity
* Use Al's suggestion for strings
* add additional failure test cases
* remove errant logging statement
* make CC required
* raise vol.Invalid when value ID isn't legit to prepare for next PR
* Use helper function
* fix tests
* black
* Add support for Z-Wave JS siren
* Add additional device class to discovery
* fix docstring
* Remove device class specific part of discovery schema
* rename test
* switch to entry.async_on_remove
* Fix logic based on #52971
* Use constants to unblock PR
* Add support to set volume level
* Update homeassistant/components/zwave_js/siren.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add transition support to zwave_js lights
* Add transition support to color_switch lights
* simplify and add tests
* fix logic
* add check for color transition to add SUPPORT_TRANSITON supported features
* Use new metadata property
* Use new metadata property
* update tests and device state dump json files
* fix file perms
* update tests and fixtures with new metadata
* update test
* update test
* update tests for color transitions
* check for color tansitions as well
* more tests
* fix color transtions
* remove unneed default
* set add_to_watched_value_ids to false
* set transition default
* properly set default
* update tests
* make sure transition is an int
* suggested changes
* Update homeassistant/components/zwave_js/light.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/zwave_js/light.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/zwave_js/light.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/zwave_js/light.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/zwave_js/light.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* formatting
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* MetOfficeData now retrieves both 3-hourly and daily data (full forecast data, as well as "now" snapshot) on each update
* Bump datapoint API up to latest version
* Create 2 sets of sensors - one of each set for 3-hourly and for daily data (same ones initially enabled, for now)
* Create two entities (one each for 3-hourly and daily data) and also add in the forecast data for each dataset
* Testing changes to accommodate now having two sets of everything for 3-hourly and daily update data
* Removed unused import (reported by flake8)
* As per conversation with @MatthewFlamm leave the 3-hourly entity's unique_id unchanged (although the display name is changed)
* Make some improvements based on reviews
Make some improvements and fix up the formatting/linting failures.
* Make some improvements based on reviews
Make some improvements and fix up the formatting/linting failures.
* Added more test coverage
* import asyncio
* Try to fix test
* Rewrote everything using CoordinatorEntity
* Fixed config flow
* Fixed lint errors
Co-authored-by: MrHarcombe <ian.harcombe@gmail.com>
Co-authored-by: Henco Appel <hencoappel+github@gmail.com>
* Add Ecobee humidifier device_info and unique_id
Ecobee humidifier entity was not connected to the thermostat device.
This change will ensure the entitiy is properly connected.
This change also fills out the ecobee-data.json fixutre data a bit
to address failures in the test setup.
* Add Ecobee humidifier device_info and unique_id
Adjust test fixture data to increase pytest coverage
Clean up indenting in ecobee-data.json
* Add Ecobee humidifier device_info and unique_id
Update exception case in device_info to not
be included in codecov tests. This case has
been tested locally.
* Add Ecobee humidifier device_info and unique_id
Address pylint issue
* Add Ecobee humidifier device_info and unique_id
Remove no cover pragma and add ecobee humidifier.py to
.coveragerc
* Modern Forms integration initial pass
* cleanup of typing and nits
* Stripped PR down to Fan only
* Review cleanup
* Set sleep_time to be required for service
* Adjust minimum sleep time to one minute.
* Code review changes
* cleanup icon init a little
As of version 0.14, the venstar_colortouch lib always initializes hum_setpoint to None. When a thermostat actually reports a humidifier state, this value is replaced with the integer value of the setpoint. This changeset corrects the humidifier detection as well as adds basic test cases for the Venstar component.
* Split initialization from data retrival
* Await class initialization
* Async camera
* More async
* Remove stale code
* Clean up
* Update tests
* Fix test
* Improve error handling
* Bump pyatmo version to 5.0.0
* Add tests
* Add cloudhook test
* Increase coverage
* Add test with no camera devices
* Add test for ApiError
* Add test for timeout
* Clean up
* Catch pyatmo ApiError
* Fix PublicData
* Fix media source bug
* Increase coverage for light
* Test webhook with delayed start
* Increase coverage
* Clean up leftover data classes
* Make nonprivate
* Review comments
* Clean up stale code
* Increase cov
* Clean up code
* Code clean up
* Revert delay
* Update homeassistant/components/netatmo/climate.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/netatmo/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Address comment
* Raise cov
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Set device_class for shutters and blinds
* Add missing. imports
* Add tests for device class setting
* Clean up
* Avoid storing the node in an unused variable
* Fix entity name
* Extend qubino shutter discovery
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add zwave_js support for HeatIt Z-TRM2fx
* fix docstring
* use AwesomeVersion to support firmware version ranges
* add guard against empty firmware range
* switch guard approach to raise exception sooner
* make post init more generic
* Set up firmware range schema as AwesomeVersion during initialization
* Update homeassistant/components/zwave_js/discovery.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Allow min_ver and max_ver to be None
* fix docstring
* reduce import scope
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add zwave_js discovery schema for Vision Security ZL7432
* add tests
* fix test
* add correct fixture
* Make discussed changes
* fix tests
* move event handler
* fix logic to get entity ID
* add test
* make discovery test more explicit
* remove domain from event data
* always provide entity_id key to make automations easier and translate value if possible
* formatting
* comment
* dont overwrite value
* Add set_myzone service requested on forums
* Add MyZone binary sensor for climate zones
* Fixed Black on binary_sensor.py
* Add the new entity
* Fix spelling
* Test myZone value
* MyZone Binary Sensor test
* Fixed new binary sensor tests
* Fix removed dependancy
* Correct fixture
* Update homeassistant/components/advantage_air/binary_sensor.py
Co-authored-by: Philip Allgaier <philip.allgaier@gmx.de>
* Updated services.yaml to use target
Co-authored-by: Philip Allgaier <philip.allgaier@gmx.de>
Jc2k
Raman Gupta
Tom Harris
J. Nick Koston
web-dc
p4p3r
Franck Nijhof
Chris
Brian Towles
Andre Lengwenus
Brett
avee87
Martin Hjelmare
Brent Petit
Eugenio Panadero
Nash Kaminski
HighOnMikey
Joakim Sørensen
Tobias Sauerwein
Dror Eiger
Maciej Bieniek
jjlawren
treylok