* Add discovery support to mqtt climate component.
* - Fix flake8 error (./homeassistant/components/climate/mqtt.py:130:1: D202 No blank lines allowed after function docstring)
- Fix test error (since climate component was expected not to work - changed it to "lock" component, which also does not have MQTT discovery support yet)
* Fix old assert statement to reflect new lock component usage
* Change invalid MQTT discovery component type from 'lock' to 'timer', since contrary to the documentation the lock component is properly supported when using MQTT discovery.
* Make configuration of invalid MQTT config component a single point of entry to prevent missing the assertion later in the code when changing.
* Add new testcases to cover not-yet-covered code paths in https://github.com/home-assistant/home-assistant/blob/dev/homeassistant/components/climate/mqtt.py
* first blood for ZhongHong HVAC Controller
* add requirements
* requirements_all.txt updated
* add zhong_hong.py to coveragerc
* add comments
* unique_id add platform name
* zhong_hong_hvac version bump to 1.0.1
* improve some coding style to match the project standard
* zhong_hong_hvac version bump to 1.0.4
* zhong_hong_hvac version require 1.0.7
* update requirements by script/gen_requirements_all.py
* zhong_hong_hvac version bump to 1.0.8
* fix startup problem
* remove unused import
* zhong_hong_hvac version bump to 1.0.9
- operation_mode: cold -> cool
* start hub listen event when all climate entities is ready
* use dispatcher to setup hub
* var name change
SIGNAL_DEVICE_SETTED_UP -> SIGNAL_DEVICE_ADDED
* async problem fix
* bugfix: set_operation_mode forget to use upper case
* stringify the exception instead of print full stack of traceback
* avoid to call str(exception) explicity
* remove unnecessary try...except clause
* remove unused import
* reviewing this code min_temp and max_temp are always present and always in celsius
* revert change (preserve unit conversion)
* revert (due to unit conversion)
* self
* clean
* cleaner
* Change nest component to Cloud Push
Change sensors.nest, binary_sensors.nest and climate.nest to push mode
nest camera still need poll to update snapshot image
Also change nest component to async
* Flake8 lint
* Fix async_notify_errors, it is not a coroutine
* Fix pylint
* Fix pylint, function name should shall shorter than 32
* Use dispatcher helper instead event bus
* Use async_update_ha_state(True)
* Refactoring load_platform
Move service registration into async_setup_nest(),
resolve an issue that before the first time configuration done,
set_mode service should not be registered
* Fix an issue that authorization failure may leave a blocked thread
* Pylinting
* async_nest_update_callback => async_update_state to avoid confusion
* Move signal handler register to async_added_to_hass
* Better handle nest api error
* Remove unnecessary register for binary_sensor
* Remove unused import
* Upgrade to python-nest 4.0.1
Fix a thread race condition issue
* Address my own comments
* Address my own comment
* Add support for climatic devices
* Update requirements_all
* Change icon to mdi:thermostat
* Update of homematicip-rest-api lib version
* Remove all mode or state relevant things - will come later
* Add current_operation again to see proper status
* Remove STATE_PERFORMANCE import
* Remove trailing whitespace
* Update requirements file
* Make mysensors component async
* Use async dispatcher and discovery.
* Run I/O in executor.
* Make mysensors actuator methods async.
* Upgrade pymysensors to 0.13.0.
* Use async serial gateway.
* Use async TCP gateway.
* Use async mqtt gateway.
* Start gateway before hass start event
* Make sure gateway is started after discovery of persistent devices
and after corresponding platforms have been loaded.
* Don't wait to start gateway until after hass start.
* Bump pymysensors to 0.14.0
* Implement support for away mode and hold mode in Venstar component
* Fix Venstar humidifier capability detection
* Add option to configure humidifier control in Venstar component
* style fix: add missing space and resolve pylint issues
* Remove quotes
* Added support for a new platform: climate.modbus
* Made changes based on code review.
* Made changes based on code review
* Made changes that were recommended in the pull request review.
* Fixed spacing line 144
* Added docstrings for the added helper functions.
* Fixed set_temperature() function to use a variable local to the function for the target temp.
* Fixed lint formatting error
* Modified logic when checking the target temperature, as well as fixing the setup_platform function
* add ability to set fan on
* add tests and change "not on" status to "auto"
* hound fix
* more hounds
* I don't understand new lines
* fix linting errors
* more linting fixes
* change method signature
* lint fixes
* hopefully last lint fix
* correct temp ranges according to ecobee API docs
* update dependency to latest version
* update tests with values from new temp logic
* fix linting issue
* more linting fixes
* add SUPPORT_FAN_MODE to capabilities
* add fan_list to attributes.
restore current fan state to OFF if fan is not running.
change target high/low temps from null to target temp when not in auto mode.
change target temp from null to high/low temp when in auto mode
change mode attribute to climate_mode for consistency with other lists.
* remove unused import
* simplify logic
* lint fixes
* revert change for target temps
* Fixes for mclimate accounts with not only melissa components
* Fixes melissa sensor to only use HVAC
* Bumping version to 1.0.3 and remove OP_MODE that is not supported
* Removes STATE_AUTO from translation and tests
* Issue 10388: Fixed platform schema min/max values of CONF_SETPOINT_SHIFT_MIN and CONF_SETPOINT_SHIFT_MAX
* readded default values for CONF_SETPOINT_SHIFT_MAX and CONF_SETPOINT_SHIFT_MIN
* Upgrade pylint to 1.8.1
* Fix no-else-return
* Fix bad-whitespace
* Fix too-many-nested-blocks
* Fix raising-format-tuple
See https://github.com/PyCQA/pylint/blob/master/doc/whatsnew/1.8.rst
* Fix len-as-condition
* Fix logging-not-lazy
Not sure about that TEMP_CELSIUS though, but internally it's probably just like if you concatenated any other (variable) string
* Fix stop-iteration-return
* Fix useless-super-delegation
* Fix trailing-comma-tuple
Both of these seem to simply be bugs:
* Nest: The value of self._humidity never seems to be used anywhere
* Dovado: The called API method seems to expect a "normal" number
* Fix redefined-argument-from-local
* Fix consider-using-enumerate
* Fix wrong-import-order
* Fix arguments-differ
* Fix missed no-else-return
* Fix no-member and related
* Fix signatures-differ
* Revert "Upgrade pylint to 1.8.1"
This reverts commit af78aa00f125a7d34add97b9d50c14db48412211.
* Fix arguments-differ
* except for device_tracker
* Cleanup
* Fix test using positional argument
* Fix line too long
I forgot to run flake8 - shame on me... 🙃
* Fix bad-option-value for 1.6.5
* Fix arguments-differ for device_tracker
* Upgrade pylint to 1.8.2
* 👕 Fix missed no-member
cdce8p
Martin Hjelmare
Ville Skyttä
Adam Mills
dreizehnelf
ruohan.chen
Paulus Schoutsen
Diogo Gomes
Philip Rosenberg-Watt
Thomas Krüger
Hugo Dupras
michaeldavie
Jason Hu
Marius
Philip Rosenberg-Watt
Mattias Welponer
William Scanlon
Andrey
Nash Kaminski
Sebastian Muszynski
Heiko Thiery
Khole
Lincoln Kirchoff
dangyuluo
uchagani
John Allen
maxclaey
Julius Mittenzwei
kennedyshead
Teemu R
karlkar
Otto Winter