All mochad devices are sharing a single socket interface. When multiple
threads are issuing requests to the mochad daemon at the same time the
write read cycle might get crossed between the threads. This is normally
not an issue for 1-way X10 devices because as long as the request issued
successfully and data is read over the socket then we know as much as
mochad will tell us (since there is no ACK from the request for most
X10 devices). However, where it does matter is on the device __init__()
because we're relying on the mochad daemon's internal state to take an
educated guess at the device's state to intialize things with. When
there are multiple devices being initialized at the same time the wires
can get crossed between and the wrong device state may be read.
To address this potential issue this commit adds locking using a
semaphore around all pairs of send_cmd() and read_data() (which is what
pymochad.device.Device.get_status() does internally) calls to the mochad
controller to ensure we're only ever dealing with a single request at a
time.
Fixesmtreinish/pymochad#4
* Updated snips to listen on new mqtt topic and use rawValue if value not present in slot
* Too late at night
* Trying to make minor changes via web
* Update test_snips.py
* Update __init__.py
* Updated wrong branch cause I'm a monkey
* Add Canary component
* Made some change to how canary data is updated and stored
* Updated to use py-canary:0.1.2
* Addressed flake8 warnings
* Import canary API locally
* Import canary API locally again
* Addressed pylint errors
* Updated requirements_all.txt
* Fixed incorrect unit of measurement for air quality sensor
* Added tests for Canary component and sensors
* Updated canary component to handle exception better when initializing
* Fixed tests
* Fixed tests again
* Addressed review comments
* Fixed houndci error
* Addressed comment about camera force update
* Addressed comment regarding timeout when fetching camera image
* Updated to use py-canary==0.2.2
* Increased update frequency to 30 seconds
* Added support for Canary alarm control panel
* Address review comments
* Fixed houndci error
* Fixed lint errors
* Updated test to only test setup component / platform
* Fixed flake error
* Fixed failing test
* Uptake py-canary:0.2.3
* canary.alarm_control_panel DISARM is now mapped to canary PRIVACY mode
* Fixed failing tests
* Removed unnecessary methods
* Removed polling in canary camera component and update camera info when getting camera image
* Added more tests to cover Canary sensors
* Address review comments
* Addressed review comment in tests
* Fixed pylint errors
* Excluded canary alarm_control_panel and camera from coverage calculation
* initial commit of shuffle option for sonos
* added test
* Small adjustments to adhere to review requests
* Removed unnessesary setting of variable. Use shuffle state from soco instead
In a case where either (a) an incorrect source name is used, or (b) the
TV isn't currently queryable (e.g. it's off), we get tracebacks because
we assume the source that we are being asked to select exists in
self._source_list.
This makes the lookup code a little more rugged, and adds in a warning
message (in place of the current exception).
* Device tracker for meraki AP
* styles fix
* fix again
* again
* and again :)
* fix hide if away
* docs and optimization
* tests and fixes
* styles
* styles
* styles
* styles
* styles fix. Hope last
* clear track new
* changes
* fix accuracy error and requested changes
* remove meraki from .coveragerc
* tests and minor changes
* remove location
* Generic thermostat restore operation mode
* Test restore operation mode
* Fix trailing whitespace
* Fix line too long
* Fix test duplicate entity_id
* Fix test
* async_added_to_hass modify modify internal state
* Test inital_operation_mode
* More restore state tests
* Fix whitespace
* fix test_custom_setup_param
* Test "None" target temp
* add ads hub, light and switch
* add binary sensor prototype
* switch: use adsvar for connection
* fix some issues with binary sensor
* fix binary sensor
* fix all platforms
* use latest pyads
* fixed error with multiple binary sensors
* add sensor
* add ads sensor
* clean up after shutdown
* ads component with platforms switch, binary_sensor, light, sensor
add locking
poll sensors at startup
update state of ads switch and light
update ads requirements
remove update() from constructors on ads platforms
omit ads coverage
ads catch read error when polling
* add ads service
* add default settings for use_notify and poll_interval
* fix too long line
* Fix style issues
* no pydocstyle errors
* Send and receive native brightness data to ADS device to prevent issues with math.floor reducing brightness -1 at every switch
* Enable non dimmable lights
* remove setting of self._state in switch
* remove polling
* Revert "remove polling"
This reverts commit 7da420f823.
* add service schema, add links to documentation
* fix naming, cleanup
* re-remove polling
* use async_added_to_hass for setup of callbacks
* fix comment.
* add callbacks for changed values
* use async_add_job for creating device notifications
* set should_poll to False for all platforms
* change should_poll to property
* add service description to services.yaml
* add for brigthness not being None
* put ads component in package
* Remove whitespace
* omit ads package
* Export climate metrics to Prometheus.
This adds climate_state and temperature_c metrics for each climate
device.
* Add more climate states to state_as_number
Andrey Kupreychik
Andrey
Matthew Treinish
tschmidty69
Anders Melchiorsen
Joe Lu
Marcus Schmidt
Lewis Juggins
Jeroen ter Heerdt
Alan Fischer
Derek Brooks
Richard Leurs
Daniel Watkins
Pascal Vizeli
Mitko Masarliev
Paulus Schoutsen
Dan Nixon
Craig J. Ward
William Scanlon
Erik Eriksson
Mateusz Drab
Adam Mills
ziotibia81
Menno Blom
Roman
Stefan Lehmann
Paul Annekov
dasos
drop table USERS; --
Nicolas Bougues