* Using new methods for blink camera
- Refactored blink platform (breaking change)
- Camera needs to be uniquely enabled in config from now on
- Added motion detection enable/disable to camera platform
* Fix motion detection
- bumped blinkpy to 0.8.1
- Added wifi strength sensor
* Added platform schema to sensor
- Added global variables for brand and attribution to main platform
* Removed blink binary sensor
* Add alarm control panel
* Fixed dependency, added alarm_home
* Update requirements
* Fix lint errors
* Updated throttle times
* Add trigger_camera service (replaced snap_picture)
* Add refresh after camera trigger
* Update blinkpy version
* Wait for valid camera response before returning image
- Motion detection now working!
* Updated for new blinkpy 0.9.0
* Add refresh control and other fixes for new blinkpy release
* Add save video service
* Pushing to force bot to update
* Changed based on first review
- Pass blink as BLINK_DATA instead of DOMAIN
- Remove alarm_arm_home from alarm_control_panel
- Re-add discovery with schema for sensors/binar_sensors
- Change motion_detected to a binary_sensor
- Added camera_armed binary sensor
- Update camera device_state_attributes rather than state_attributes
* Moved blink.py to own folder. Added service hints.
* Updated coveragerc to reflect previous change
* Register services with DOMAIN
- Change device add for loop order in binary_sensor
* Fix lint error
* services.async_register -> services.register
Add `unique_id` to all rachio entities
Add platform discovery to rachio component
Move config options from switch.rachio platform to the rachio component
* Use pyspcwebgw library.
* Support alarm triggering.
* Update requirements.
* Add pyspcwebgw to test reqs.
* Also update script.
* Use dispatcher.
* Address review feedback.
* create binary sensor even if initial update fails
* fixed broken test assertion
* fixed broken test assertion
* avoid fetching resource twice - manually in the setup_platform and then through add_devices
* raising PlatformNotReady instead of creating the sensor if the initial rest call fails; throttling the update to avoid fetching the same resource again immediately after setting up sensor
* rolled back throttling of the rest update call; can still avoid updating the binary sensor's rest resoure twice; fixed tests
* typo
* Added support for multiple tag managers. Fixed typo for signal strength.
* Corrected broken merge.
* Fixed flake8/pylint error.
* Improved docstring.
* Allow only_cache parameter in zha.safe_read()
* Use cache_only for binary_sensor.zha initial update.
* Use cache_only for fan.zha initial update.
* Use cache_only for sensor.zha initial update.
* Use cache_only for switch.zha initial update.
* Use cache_only for light.zha initial update.
* Refactor cached only read in zha platform.
* Add zha.configure_reporting() method.
Binds a cluster and configures reporting for the specified attribute.
* git add homeassistant/components/binary_sensor/zha.py
* Refactor sensor.zha to use new 'configure_reporting() method.
* Zha configure reporting - switch (#1)
* use configure_reporting for zha switch
* lint fixes
* Rename variables/classes to properly reflect the content
* Allow device registry to optionally store config entries
* Connections and identifiers are now sets with tupels
* Make config entries mandatory
* Fix duplicate keys in test
* Rename device to device_info
* Entity platform should only create device entries if config_entry_id exists
* Fix Soundtouch tests
* Revert soundtouch to use self.device
* Fix baloobs comments
* Correct type in test
* First draft
* Generate device id
* No obscure registry
* Dont store config_entry_id in device
* Storage
* Small mistake on rebase
* Do storage more like entity registry
* Improve device identification
* Add tests
* Remove deconz device support from PR
* Fix hound comments, voff!
* Fix comments and clean up
* Fix proper indentation
* Fix pydoc issues
* Fix mochad component to not use self.device
* Fix mochad light platform to not use self.device
* Fix TankUtilitySensor to not use self.device
* Fix Soundtouch to not use self.device
* Fix Plex to not use self.device
* Fix Emby to not use self.device
* Fix Heatmiser to not use self.device
* Fix Wemo lights to not use self.device
* Fix Lifx to not use self.device
* Fix Radiotherm to not use self.device
* Fix Juicenet to not use self.device
* Fix Qwikswitch to not use self.device
* Fix Xiaomi miio to not use self.device
* Fix Nest to not use self.device
* Fix Tellduslive to not use self.device
* Fix Knx to not use self.device
* Clean up a small mistake in soundtouch
* Fix comment from Ballob
* Fix bad indentation
* Fix indentatin
* Lint
* Remove unused variable
* Lint
* Implement X10
* Add X10 after add_device_callback
* Ref device by id not hex and add x10OnOffSwitch name
* X10 services and add sensor device
* Correctly reference X10_HOUSECODE_SCHEMA
* Log adding of X10 devices
* Add X10 All Units Off, All Lights On and All Lights Off devices
* Correct ref to X10 states vs devices
* Add X10 All Units Off, All Lights On and All Lights Off devices
* Correct X10 config
* Debug x10 device additions
* Config x10 from bool to housecode char
* Pass PLM to X10 device create
* Remove PLM to call to add_x10_device
* Unconfuse x10 config and method names
* Correct spelling of x10_all_lights_off_housecode
* Bump insteonplm to 0.10.0 to support X10
* Add host to config options
* Add username and password to config for hub connectivity
* Add username and password to config for hub
* Convert port to int if host is defined
* Add KeypadLinc
* Update config schema to require either port or host
* Solidify Hub and PLM configuration to ensure proper settings
* Update hub schema
* Bump insteonplm version
* Fix pylint and flake issues
* Bump insteonplm to 0.12.1
* Merge insteon_plm and insteon_local to insteon
* Rename insteon_plm to insteon
* Bump insteonplm to 0.12.2
* Flake8 cleanup
* Update .coveragerc for insteon_plm, insteon_local and insteon changes
* Add persistent notification
* Fix reference to insteon_plm
* Fix indentation
* Shorten message and fix grammer
* Add comment to remove in release 0.90
* Hound fix
* remove velbus fan and light platforms
these platforms should not be there since they can be created with template components based on switch platform
* use latest version of python-velbus which supports auto-discovery of modules
* fix linting errors
* fix linting errors
* fix linting errors
* address review comments from @MartinHjelmare
* update based on automatic feedback
* fix linting errors
* update dependency
* syntax corrections
* fix lint warning
* split out common functionality in VelbusEntity
use sync methods for loading platforms
support unique_ids so that entities are registred in entity registry
* fix linting errors
* fix linting errors
* fix linting errors
* integrate review comments (common functionality in VelbusEntity class)
* rename DOMAIN import to VELBUS_DOMAIN
* revert change created by requirements script
* regen
## Description:
More fixes flagged by pylint 2 that don't hurt to have before the actual pylint 2 upgrade (which I'll submit soon).
## Checklist:
- [ ] The code change is tested and works locally.
- [x] Local tests pass with `tox`. **Your PR cannot be merged unless tests pass**
* Add event handler to capture binary sensor on messages
* Log event trigger
* Log event firing
* Capture platform correctly
* Fix test for platform eq binary_sensor
* Create sensor events
* Add light and battery sensors
* Bump insteonplm version to 0.11.6
* Fix naming of BUTTON_PRESSED_STATE_NAME
* Fix naming of fire event methods
* Add logging
* Add DOMAIN definition
* Get state name from plm.devices
* Remove stale reference to button ID
* Fix reference to state name
* Remove incorrect ref to self
* Log remote button pressed event
* Change mode to button_mode and fix values to array
* Rename CONF_MODE to CONF_BUTTON_MODE
* Log platform create with mode
* Properly assign button_mode to track mode
* Implement is_on
* Change mini-remotes to events only
* Remove button_mode config option
* Fix reference to _fire_button_on_off_event
* Bump insteon version to 0.11.7
* Flake8 clean up
* Flake8 cleanup
* Use % format in logging per pylint
* Code review updates
* Resolve conflict
* Lint
Heiko Thiery
Kevin Fronczak
Thomas Lovén
Aaron Bach
cdce8p
Jason Hu
Otto Winter
Greg Laabs
Gerard
emontnemery
Martin Berg
Malte Franken
Robert Svensson
Ville Skyttä
Fabian Affolter
Mattias Welponer
Sergiy Maysak
Alexei Chetroi
Sebastian Muszynski
Paulus Schoutsen
Tom Harris
Max Prokhorov
Franck Nijhof
Thomas Delaet
Jens Østergaard Nielsen
digiblur
fucm