d75834cd1e
Add presence duration number ( #79498 )
2022-10-23 22:30:03 +02:00
62c4cd3c26
Add name and slug to supervisor discovery info ( #80094 )
2022-10-11 16:56:45 +02:00
2ce837f588
Resolve late comments to deCONZ sensor ( #79380 )
...
Resolve late comments to deCONZ sensor #79137
2022-09-30 21:49:59 +02:00
0d696b84b2
Cleanup root component imports in tests ( #78893 )
2022-09-21 06:57:41 -10:00
7a6897c757
Add deconz current hvac operation to thermostate based on "state" ( #59989 )
...
* deconz - add current hvac operation to thermostate based on "state"
* deconz - extend current hvac operation to thermostate based on "state" and "mode"
* Add tests for current hvac action
* Add boost mode as special case
* format using Black
* sort imports
* Add test for device with mode none and state none
* Update homeassistant/components/deconz/climate.py
Co-authored-by: Robert Svensson <Kane610@users.noreply.github.com>
* Fix test_climate.py test_no_mode_no_state
* Add test for boost mode
Co-authored-by: Robert Svensson <Kane610@users.noreply.github.com>
2022-09-21 08:20:44 +02:00
61ff52c93a
Normalize deCONZ sensor unique IDs ( #76357 )
...
* Normalize deCONZ sensor unique IDs
* Handle battery sensors properly
* Fix daylight sensor unique ID
2022-08-31 08:12:25 +02:00
ff3d3088ee
Add Aqara FP1 support to deCONZ integration ( #77568 )
2022-08-30 23:33:05 -04:00
2161b6f049
Fix level controllable output controls in deCONZ ( #77223 )
...
Fix level controllable output controls
2022-08-24 22:00:54 -04:00
c2f026d0a7
Minor deCONZ clean up ( #76323 )
...
* Rename secondary_temperature with internal_temperature
* Prefix binary and sensor descriptions matching on all sensor devices with COMMON_
* Always create entities in the same order
Its been reported previously that if the integration is removed and setup again that entity IDs can change if not sorted in the numerical order
* Rename alarmsystems to alarm_systems
* Use websocket enums
* Don't use legacy pydeconz constants
* Bump pydeconz to v103
* unsub -> unsubscribe
2022-08-06 01:34:27 +02:00
3b3766fbe0
Bump deconz dependency to fix #74523 ( #74710 )
2022-07-08 12:54:09 +02:00
b071affcb4
Use pydeconz interface controls for cover platform ( #74535 )
2022-07-07 00:31:47 +02:00
05416f56aa
Use FlowResultType in deCONZ config flow tests ( #74495 )
2022-07-06 09:45:30 +02:00
abf67c3153
Normalize deCONZ binary sensor unique IDs ( #73657 )
2022-06-28 13:45:25 -07:00
aef69f87f4
More enums in deCONZ Alarm Control Panel ( #73800 )
2022-06-22 23:02:34 +02:00
e60b247b51
Simplify setup of deCONZ platforms ( #72453 )
2022-05-24 20:48:09 -07:00
c3d19f3827
Clean up accessing device_registry helpers via hass ( #72031 )
2022-05-17 12:22:15 -07:00
24a0007785
Add additional context data to logbook events ( #71721 )
2022-05-12 17:21:14 -07:00
24d7a464e1
Refactor logbook to reduce overhead and complexity ( #71509 )
2022-05-08 21:47:26 -07:00
d52137cc1a
Add state class measurement to deCONZ LightLevel sensors ( #71516 )
2022-05-08 15:54:43 +02:00
37b59dfcc0
Make sure sensor state value is not None prior to trying to used the scaled value ( #71189 )
2022-05-02 10:51:19 +03:00
a0fe5b0247
Make deCONZ SSDP discovery more strict by matching on manufacturerURL ( #71124 )
2022-04-30 19:33:47 +02:00
7f094a928b
Fix linking issue when deCONZ gateway is not unlocked ( #71082 )
2022-04-29 15:34:33 -07:00
e1f4b17971
Pydeconz raise ResponseError when deCONZ Rest API Plugin is not yet ready ( #71078 )
2022-04-29 23:55:55 +03:00
7d2363ad22
Use light enums in tests ( #70801 )
2022-04-26 16:32:00 +02:00
f7d9797c62
Streamline setup of deCONZ scene platform ( #70700 )
2022-04-26 11:42:56 +02:00
9dcbc8469e
Use climate enums in deconz ( #70630 )
...
* Use climate enums in deconz
* Adjust tests
* Adjust type hint
* Update climate.py
* Update climate.py
* Update climate.py
* Don't edit files in Github!
2022-04-25 16:18:44 +02:00
8eae572c93
Mark type "On/Off Switch" as a deCONZ switch entity ( #70598 )
...
Convert entity types of light platform to switch platform
2022-04-25 08:25:38 +02:00
b15387ffb9
Remove migration of entities from deCONZ switch to siren platform ( #70600 )
2022-04-24 23:32:13 +02:00
009111151d
Move deCONZ alarm system imports to reflect the changes in pydeconz ( #70453 )
2022-04-24 10:17:46 +02:00
301dcaae63
Move deCONZ sensor imports to reflect changes in pydeconz ( #70471 )
2022-04-23 22:59:51 +03:00
5e50a8abd5
Mark device triggers from hidden or auxiliary entities as secondary ( #70335 )
...
* Mark device triggers from hidden or auxiliary entities as secondary
* Update tests
2022-04-21 08:01:32 +02:00
f0b1d35562
Address late review of deconz climate ( #70148 )
...
* Fix late comment
* Avoid unnecessary properties
* Add clip sensor test to increase coverage of climate
* Fix review_comment
2022-04-16 21:14:54 +02:00
87551b7880
Improve typing of deCONZ climate platform ( #69882 )
...
* Improve typing of deCONZ climate platform
homeassistant/components/deconz/climate.py:153: error: Dict entry 0 has incompatible type "str": "bool"; expected "str": "str" [dict-item]
homeassistant/components/deconz/climate.py:154: error: Dict entry 1 has incompatible type "str": "bool"; expected "str": "str" [dict-item]
homeassistant/components/deconz/climate.py:176: error: Argument 1 to "get" of "Mapping" has incompatible type "Optional[Literal['off', 'low', 'medium', 'high', 'on', 'auto', 'smart']]"; expected "str" [arg-type]
homeassistant/components/deconz/climate.py:200: error: Argument 1 to "get" of "Mapping" has incompatible type "Optional[Literal['off', 'auto', 'cool', 'heat', 'emergency heating', 'precooling', 'fan only', 'dry', 'sleep']]"; expected "str" [arg-type]
homeassistant/components/deconz/climate.py:218: error: Argument 1 to "set_config" of "Thermostat" has incompatible type "**Dict[str, str]"; expected "Optional[int]" [arg-type]
homeassistant/components/deconz/climate.py:218: error: Argument 1 to "set_config" of "Thermostat" has incompatible type "**Dict[str, str]"; expected "Optional[bool]" [arg-type]
homeassistant/components/deconz/climate.py:218: error: Argument 1 to "set_config" of "Thermostat" has incompatible type "**Dict[str, str]"; expected "Optional[List[str]]" [arg-type]
homeassistant/components/deconz/climate.py:225: error: Argument 1 to "get" of "Mapping" has incompatible type "Optional[Literal['holiday', 'auto', 'manual', 'comfort', 'eco', 'boost', 'complex']]"; expected "str" [arg-type]
homeassistant/components/deconz/climate.py:244: error: Unused "type: ignore" comment
homeassistant/components/deconz/climate.py:250: error: Unused "type: ignore" comment
homeassistant/components/deconz/climate.py:253: error: Unused "type: ignore" comment
* Simplify populating supported_hvac_modes
Fix tests
2022-04-14 23:19:42 +03:00
d6d7f3cb3c
Bump pydeconz to v88 ( #69369 )
2022-04-05 13:44:04 -07:00
4bb52297a6
Replace hass helper calls in deCONZ device trigger tests ( #68197 )
2022-03-15 18:51:12 +01:00
362191a0e6
Add typing of deCONZ device_trigger ( #67496 )
2022-03-14 17:37:48 +01:00
723dcbafca
Complete fan speed transition from #59781 ( #67743 )
2022-03-09 10:38:12 +01:00
dd88a05cb4
Make type checking pass for deCONZ init, gateway and services ( #66054 )
...
* Type and enable type checking for init, config_flow, diagnostics, gateway and services
* Fix import
* Fix review comment
2022-02-23 13:10:35 +01:00
dd9b14d5c9
Add Button platform to deCONZ integration ( #65700 )
...
* Improve scene platform
* Add button platform, tests and fix tests affected by new entities existing
* Remove unnused property
* Bump dependency to v87
2022-02-16 17:55:30 +01:00
1bc936ca8d
Improve Deconz sensors ( #65259 )
2022-02-15 08:32:56 +01:00
b012b79167
Adapt deCONZ number platform to align with updated design of binary sensor and sensor platforms ( #65248 )
...
* Adapt number to align with binary sensor and sensor platforms
* Make number tests easier to expand
2022-02-08 23:03:37 +01:00
96c4e33b24
Parametrize deCONZ binary sensors ( #65012 )
...
* Improve test coverage prior to improving deCONZ binary sensor platform
* Define all relevant binary sensors as DeconzBinarySensorDescription
* Fix review comment
* Allow providing extra update keys if sensor provides extra attributes
* Minor touch up of naming
* Remove duplicate assert
2022-02-04 12:58:07 +01:00
30440cd1ba
Add logic to avoid creating the same scene multiple times ( #65207 )
2022-01-30 01:11:28 +02:00
55d3de3411
Add binary sensor for smoke alarm test state ( #64873 )
2022-01-25 17:46:31 +01:00
425911e850
Use whole config entry in deCONZ diagnostics ( #64795 )
2022-01-23 23:14:02 +01:00
01fbc4257b
Redact possibly sensitive information in deCONZ diagnostics data ( #64754 )
2022-01-23 11:24:46 +01:00
84b483673e
Remove system info from deCONZ diagnostics ( #64704 )
2022-01-23 07:43:07 +01:00
11de453848
Add diagnostics to deCONZ integration ( #64585 )
2022-01-20 14:47:42 -08:00
3258f66097
Expose deCONZ configuration url from discovered entry ( #64519 )
2022-01-20 13:46:22 +01:00
deed5f327c
Add low battery binary sensor to deCONZ integration ( #64168 )
...
* Make tamper sensor a property sensor
* Add low battery binary sensor as a binary property sensor
* Change according to review comment
* Use value_fn lambda
* Fix comparison
* Specific entity_description typing
* Minimize the code block affected by catching AttributeError
* Update homeassistant/components/deconz/binary_sensor.py
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Update homeassistant/components/deconz/binary_sensor.py
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Avoid try statement
* Reflect review changes in sensor platform as well
* Store known sensor entities once per device
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
2022-01-17 22:35:20 +01:00
7e40707288
Add Air Quality PPB sensor to deCONZ integration ( #64164 )
...
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
2022-01-17 20:25:55 +01:00
f135d77a27
Fix deconz light service parameter handling ( #62128 )
...
* Only check presence of values, not their content
* Add tests
* Revert "Only check presence of values, not their content"
This reverts commit 046f0ed5fd
2021-12-22 09:29:54 +01:00
5926961ed5
Use DeviceAutomationType in tests/components/[a-f]* ( #62440 )
2021-12-20 22:26:29 +01:00
373790cb15
Use DeviceClass Enums in deconz tests ( #62114 )
2021-12-16 21:46:01 +01:00
358922db56
Use dataclass for HassioServiceInfo ( #60824 )
...
Co-authored-by: epenet <epenet@users.noreply.github.com>
2021-12-03 14:05:56 +01:00
9e96f3e227
Use HassioServiceInfo in deconz tests ( #60868 )
2021-12-02 10:33:23 -10:00
4411d51d6f
Use dataclass properties in deconz discovery ( #60690 )
...
Co-authored-by: epenet <epenet@users.noreply.github.com>
2021-12-01 19:38:20 +01:00
8ddfa424c0
Add typing to deCONZ init and config flow ( #59999 )
2021-12-01 18:59:52 +01:00
f292691b7b
Use SsdpServiceInfo for ssdp tests (part 3) ( #60334 )
...
Co-authored-by: epenet <epenet@users.noreply.github.com>
2021-11-25 11:46:20 -06:00
39691faccc
Use DeviceEntryType in non-typechecked code too ( #58646 )
2021-11-23 10:04:33 +01:00
29e0ef604e
Add typing to deCONZ Climate and Cover platforms ( #59610 )
2021-11-17 15:08:37 +01:00
2ca874a15c
Add configuration_url to deCONZ device when entry source is addon ( #59598 )
2021-11-14 11:49:02 +01:00
ab7a34fc71
Add support for device configuration URL to deCONZ gateway ( #58184 )
2021-10-22 19:41:49 +02:00
333c80a694
Assign entity category diagnostics to deCONZ tampering sensors ( #58112 )
2021-10-20 20:24:11 +02:00
008b784fc5
Add deCONZ number config entity for Hue motion sensor delay ( #58076 )
...
* First working draft of number platform
* Replace duration with delay for Hue motion sensors
Improve tests
* Bump dependency to v85
* Use constant for entity category
* Use type rather than using __class__
* Fix unique ID
2021-10-20 11:23:24 +02:00
edefa9f4f4
Assign entity category diagnostics to deCONZ battery sensors ( #58077 )
2021-10-20 09:11:17 +02:00
93ba966808
Add the correct device class to deCONZ Tamper entity ( #57834 )
2021-10-17 17:45:32 +02:00
a4d9019ffc
Refactor persistent notification to no longer route all data via a service ( #57157 )
...
* Convert persistent notification tests to async
* Create/dismiss persistent notifications in exposed functions, not service calls
* Fix notify persistent_notification
* Remove setting up persistent_notification
* Drop more setups
* Empty methods
* Undeprecate sync methods because too big task
* Fix setup clearing notifications
* Fix a bunch of tests
* Fix more tests
* Uno mas
* Test persistent notification events
* Clean up stale comment
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
2021-10-07 12:58:00 +02:00
8d06527cb1
Improve deCONZ services code quality ( #56904 )
...
* setup and unload services does not need to be async
* Only use DECONZ_DOMAIN to decide if service should be setup
* Consolidation of functionality
* Make a service to schema dictionary
2021-10-01 14:31:38 -04:00
1c1bb057d7
CLIPGenericFlag should be deCONZ sensor not binary sensor ( #56901 )
2021-10-01 17:10:01 +02:00
f224ab6d67
Use isinstance to verify class in deCONZ integration ( #56794 )
...
* Don't enable any variants of the daylight sensor entities by default
* Use isinstance rather than doing ZHATYPE compare
* Accidentally removed an import
2021-09-29 21:19:21 +02:00
bf7c2753d5
deCONZ use siren platform ( #56397 )
...
* Add siren.py
* Working siren platform with 100% test coverage
* Also add test file...
* Add test to verify that switch platform cleans up legacy entities now that sirens are their own platform
* Update homeassistant/components/deconz/siren.py
Co-authored-by: jjlawren <jjlawren@users.noreply.github.com>
2021-09-18 21:59:04 +02:00
539ef31046
Reflect changes to pydeconz v84 ( #56361 )
...
Mostly snake case conversions and typing
But also a change in retry mechanism
Added a more complete set_* call to most types to remove the direct relation to rest API of deCONZ
2021-09-18 09:05:08 +02:00
6ad0e0220a
Update alarm control panel and deconz alarm event to reflect the finalized implementation in deCONZ ( #54936 )
...
* Update alarm control panel and deconz alarm event to reflect the new implementation in deCONZ
* Bump dependency to v83
2021-08-23 20:56:45 +02:00
edf0e0bd08
Add energy device class to deCONZ consumption sensors ( #53731 )
2021-07-29 16:16:08 -07:00
d0bef97453
Handle situations where action is part of a deCONZ event but has the value None ( #53373 )
...
* Handle situations where action is part of an event but has the value None
* Cover more possible permutations of what a bad action string is
2021-07-23 21:43:00 +02:00
c96f01df1f
Fix groups reporting incorrect supported color modes ( #53088 )
2021-07-19 10:32:21 +02:00
fd6b5ed072
Prefer using xy over hs when supported by light ( #52883 )
2021-07-12 08:17:50 +02:00
605f65b75d
Make use of entry id rather than unique id when storing deconz entry in hass.data ( #52584 )
...
* Make use of entry id rather than unique id when storing entry in hass data
* Update homeassistant/components/deconz/services.py
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
2021-07-06 17:18:54 +02:00
e22893a206
Make attestation of supported features easier to read (deCONZ test) ( #52096 )
...
Make is_deconz_group a constant
2021-06-22 20:34:25 +02:00
6814e9607a
Improve deCONZ lights supported_color_modes and tests ( #51933 )
...
* Improve deconz lights tests
* Simplify attribute definition
* Bump pydeconz to v80
2021-06-22 19:29:58 +02:00
b1022ce84e
Use supported color modes in deCONZ integration ( #51656 )
...
* Initial commit everything is working, need to reevaluate tests
* Fix supported color modes and hs_color
* Attest color mode
2021-06-10 08:51:58 +02:00
443463e19d
Emulate color_temp for lights which support color or white ( #51654 )
...
* Emulate color_temp for lights which support color or white
* Support legacy lights
* Tidy up group.light code
* Improve color_temp to white conversion
* Remove color_temp to white conversion
* Add test
* Tweak deconz test
2021-06-09 11:23:01 +02:00
154c849eac
Filter unsupported parameters from light service calls ( #51084 )
...
* Filter unsupported parameters from light service calls
* Silence pylint
* Fix deconz tests
* Fix mqtt tests
* Fix scene tests
* Fix trådfri emulated CT
* Fix mqtt tests
2021-05-26 08:02:59 +02:00
77d5244577
Use device registry CONNECTION_* constants ( #49923 )
2021-04-30 23:58:50 +02:00
c68b259bd3
Cleanup of unused connection_class logic ( #49865 )
...
Co-authored-by: Joakim Sørensen <joasoe@gmail.com>
2021-04-29 23:12:58 +02:00
056f636568
Add tampering sensor to deCONZ integration ( #49776 )
2021-04-28 20:16:06 +02:00
5e07ab17b2
Add support for deCONZ alarm events in logbook ( #49652 )
...
* Add support for alarm events in logbook
* Update homeassistant/components/deconz/alarm_control_panel.py
Co-authored-by: jjlawren <jjlawren@users.noreply.github.com>
2021-04-28 19:46:15 +02:00
311e0e4185
Last minute tweaks to deCONZ alarm panel entity service( #49819 )
...
Text for entry and exit delay was wrong
Remove functions that need a bit more investigating
2021-04-28 18:54:53 +02:00
58ad3b61f7
Entities for secondary temperature values created by certain Xiaomi devices in deCONZ ( #49724 )
...
* Create sensors for secondary temperature values created by certain Xiaomi devices
* Fix tests
2021-04-27 08:43:06 +02:00
153d6e891e
Use config_entries.SOURCE_* constants ( #49631 )
2021-04-25 11:27:40 +02:00
b0fecdcc3d
Add entity service for deCONZ alarm control panel to control states used to help guide user transition between primary states ( #49606 )
2021-04-24 15:46:16 +02:00
34245c3add
Add alarm control panel support to deCONZ integration ( #48736 )
...
* Infrastructure in place
* Base implementation
* Add alarm event
* Add custom services to alarm control panel
* Add service descriptions
* Increase test coverage
* Simplified to one entity service with an options selector
* Remove everything but the essentials
* Add library with proper support
* Fix stale comments
2021-04-20 17:34:11 +02:00
c80f34a754
Add support for ZHADoorLock locks to deCONZ integration( #48516 )
2021-03-31 09:36:06 +02:00
52475c108f
Make integration setup optional ( #48381 )
2021-03-29 13:53:47 -07:00
70d9e8a582
Add proper percentage support to deCONZ fan integration ( #48187 )
...
* Add proper percentage support to deCONZ fan integration
* Properly convert speed to percentage
* Remove disabled method
* Replace convert_speed with a dict
2021-03-23 22:29:55 +01:00
1095d93892
Increase test coverage of deCONZ device triggers ( #48126 )
...
* Increase test coverage of deCONZ device triggers
* Revert removed new line
* Found a way to explicitly assert that exceptions are raised
* Remove unnecessary block till done
* Fix unnecessary elif
* Fix review comments
* Remove helper tests
2021-03-23 13:49:44 +01:00
863f75e65e
Improve test coverage of deconz_device ( #48141 )
2021-03-20 14:22:01 +01:00
24e067782a
Improve sensor coverage by verifying daylight sensor attributes ( #48090 )
2021-03-19 16:51:44 +01:00
fa5ce70af1
Improve test coverage of deCONZ config flow ( #48091 )
2021-03-19 13:37:22 +01:00
Robert Svensson
Martin Hjelmare
epenet
Michael Jäger
Franck Nijhof
J. Nick Koston
Jelte Zeilstra
Erik Montnemery
schmyd
Ville Skyttä
Dave T
Paulus Schoutsen