* Backend support for importing waypoints from owntracks as HA zones
* Added test for Owntracks waypoints import
* Backend support for importing waypoints from owntracks as HA zones
* Added test for Owntracks waypoints import
* Removed redundant assignment to CONF_WAYPOINT_IMPORT_USER
* Fixed zone test break and code style issues
* Fixed style issues
* Fixed variable scope issues for entities
* Fixed E302
* Do not install pip packages in tests
* EventBus: return function to unlisten
* Convert automation to entities with services
* Refactored zone creation based on code review feedback, enhanced configuration
* Added unit test to enhance waypoint_whitelist coverage
* Fix JSON encoder issue in recorder
* Fix tests docstring
* * Improved zone naming in waypoint import
* Added more test coverage for owntracks and zone
* Back to 0.28.0.dev0
* Code review feedback from @pavoni
* Added bitfield of features for flux_led since we are supporting effects
* Host should be optional for apcupsd component (#3072)
* Use voluptuous for file (#3049)
* Zwave climate Bugfix: if some setpoints have different units, we should fetch the o… (#3078)
* Bugfix: if some setpoints have different units, we should fetch the one that are active.
* Move order of population for first time detection
* Default to config if None unit_of_measurement
* unit fix (#3083)
* humidity slider (#3088)
* If device was off target temp was null. Default to Heating setpoint (#3091)
* Fix linting
* Upgrade pyuserinput to 0.1.11 (#3068)
* Upgrade pyowm to 2.4.0 (#3067)
* improve isfile validation check (#3101)
* Refactor notification titles to allow for them to be None, this also includes a change in Telegram to only include the title if it's present, and to use a Markdown parse mode for messages (#3100)
* Fix broken test
* rfxtrx sensor clean up
* Bitcoin sensor use warning instead of error (#3103)
* Use voluptuous for HDMI CEC & CONF_DEVICES constants (#3107)
* Update voluptuous for nest (#3109)
* Update configuration check
* Extend platform
* Fix for BLE device tracker (#3019)
* Bug fix tracked devices
* Added scan_duration configuration parameter
* fix homematic climate implementation (#3114)
* Allow 'None' MAC to be loaded from known_devices (#3102)
* Use voluptuous for xmpp (#3127)
* Use voluptuous for twitter (#3126)
* Use voluptuous for Fritzbox and DDWRT (#3122)
* Use Voluptuous for BT Home Hub (#3121)
* Use voluptuous for syslog (#3120)
* Use voluptuous for Aruba (#3119)
* Use constants, update configuration check, and ordering (Pilight) (#3118)
* Use contants, update configuration check, and ordering
* Fix pylint issue
* Migrate to voluptuous (#3113)
* Fix typo (#3108)
* Migrate to voluptuous (#3106)
* Update voluptuous (#3104)
* Climate and cover bugfix (#3097)
* Avoid None comparison for zwave cover.
* Just rely on unit from config for unit_of_measurement
* Explicit return None
* Mqtt (#11)
* Explicit return None
* Missing service and wrong service name defined
* Mqtt state was inverted, and never triggering
* Migrate to voluptuous (#3096)
* Migrate to voluptuous (#3084)
* Fixed Homematic cover (#3116)
* Migrate to voluptuous (#3069)
🐬
* Migrate to voluptuous (#3066)
🐬
* snapcast update (#3012)
* snapcast update
* snapcast update
* validate config
* use conf constants
* orvibo updates (#3006)
🐬
* Update frontend
* move units to temperature for climate zwave. wrong state was sent to mqtt cove
* Use voluptuous for instapush (#3132)
* Use voluptuous for Octoprint (#3111)
* Migrate to voluptuous
* Fix pylint issues
* Add missing docstrings (fix PEP257 issues) (#3098)
* Add missing docstrings (fix PEP257 issues)
* Finish sentence
* Updated braviatv's braviarc version to 0.3.4 (#2997)
* Updated braviarc version to 0.3.4
* Updated braviarc version to requirements_all.txt
* Use voluptuous for Acer projector switch (#3077)
🐬
* Use voluptuous for twilio (#3134)
* Use voluptuous for webostv (#3135)
* Use voluptuous for Command line platforms (#2968)
* Migrate to voluptuous
* Fix pylint issues
* Remove FIXME
* Split setup test
* Test with bootstrap
* Remove lon and lat
* Fix pylint issues
* Add coinmarketcap sensor (#3064)
* Migrate to voluptuous (#3142)
🐬
* Back out insteon hub and fan changes (#3062)
* Move details to docs (#3146)
* Update frontend
* Use constants (#3148)
* Update ordering (#3149)
* Migrate to voluptuous (#3092)
* Display the error instead of the traceback (notify.slack) (#3079)
* Display the error instead of the traceback
* Remove name for check
* Automatic ODB device tracker & device tracker attributes (#3035)
* Migrate to voluptuous (#3173)
* Add voluptuous for tomato and SNMP (#3172)
* Improve voluptuous and login errors for Asus device tracker (#3170)
* Add exclude option to nmap device tracker (#2983)
* Add exclude option to nmap device tracker
Adds an optional exclude paramater to nmap device tracker.
Devices specified in the exclude list will never be scanned
by nmap. This can help to reduce log spam.
ex:
```
device_tracker:
- platform: nmap_tracker
hosts: 10.0.0.1/24
home_interval: 1
interval_seconds: 12
consider_home: 120
track_new_devices: yes
exclude:
- 10.0.0.2
- 10.0.0.1
```
* Handle optional exclude
* Style fixed
* Added Xbox Live component (#3013)
* Added Xbox Live component
* Added Xbox Live sensor to coveralls
* Added init success checks
* Added entity id
* Adding link_names to post.message call (#3167)
If you do not turn link_names on, Slack will not highlight @channel and @username messages.
* Allow https (fixes#3150) (#3155)
* Use constants (#3156)
* Bugfix: ctach Runtime errors (#3153)
"RuntimeError: Disable scan failed" has been seen in a live installation
* Migrate to voluptuous (#3166)
🐬
* Migrate to voluptuous (#3164)
🐬
* Migrate to voluptuous (#3163)
🐬
* Migrate to voluptuous (#3162)
🐬 and 🍪 for fixing quotes!
* Exclude www_static from pydocstyle linting (#3175)
🐬
* Migrate to voluptuous (#3174)
* Migrate to voluptuous (#3171)
* Use voluptuous for mFi switch (#3168)
* Migrate to voluptuous
* Take change configuration into account
* Migrate to voluptuous (#3144)
🐬
* Add the occupancy sensor_class (#3176)
Such a complicated PR
* Update frontend
* Use voluptuous for Unifi, Ubus (#3125)
* Using alert with Hue maintains prior state (#3147)
* When using flash with hue, dont change the on/off state of the light so that it will naturally return to its previous state once flash is complete
* ATTR_FLASH not ATTR_EFFECT
* MQTT fan platform (#3095)
* Add fan.mqtt, allow brightness to be passed and mapped to a fan speed for compatibility with emulated_hue
* Pylint/Flake8 fixes
* Remove brightness
* Add more features, like custom oscillation/speed payloads and setting the speed list
* Flake8 fixes
* flake8/pylint fixes
* Use constants
* block fan.mqtt from coverage
* Fix oscillating comment
* Add Sphinx API doc generation (#3029)
* add's sphinx project to docs/ dir
* include core/helpers autodocs for API reference
* Allow reloading automation without restarting HA (#3002)
* Migrate to voluptuous (#3182)
🐬
* Migrate to voluptuous (#3179)
🐬
* Added scale and offset to the Temper component (#2853)
🐬
* Use voluptuous for BT and Owntracks device trackers (#3187)
🐬
* Correct binary_sensor.ecobee docs URL
* Use voluptuous for Hikvisioncam switch (#3184)
* Migrate to voluptuous
* Use vol.Optional
* Use voluptuous for Edimax (#3178)
🐬
* Use voluptuous for Bravia TV (#3165)
🐬
* Added support to 'effect: random' to Osram Lightify lights (#3192)
* Added support to 'effect: random' to Osram Lightify lights
* removed extra line not required
* Use voluptuous for message_bird, sendgrid (#3136)
* Try out the RTD theme
* Doc updates
* Update voluptuous for existing notify platforms (#3133)
* Update voluptuous for exists notify platforms
* fix constants
* Simple trend sensor. (#3073)
* First cut of trend sensor.
* Tidy.
* Migrate to voluptuous (#3193)
* Migrate to voluptuous (#3194)
🐬
* Migrate to voluptuous (#3197)
* Migrate to voluptuous (#3198)
🐬
* Use extend of PLATFORM_SCHEMA (#3199)
* Migrate to voluptuous (#3202)
🐬
* Updated to use the occupancy sensor_class (#3204)
🐬
* Migrate to voluptuous (#3206)
* Migrate to voluptuous (#3207)
* Migrate to voluptuous (#3208)
🐬
* Migrate to voluptuous (#3209)
🐬
* Migrate to voluptuous (#3214)
* Use voluptuous for SqueezeBox (#3212)
* Migrate to voluptuous
* Remove name
* Migrate to voluptuous and upgrade uber_rides to 0.2.5 (#3181)
* Migrate to voluptuous (#3200)
🐬
* Use Voluptuous for Luci and Netgear device trackers (#3123)
* Use Voluptuous for Luci and NEtgear device trackers
* str_schema shortcut
* Undo str_schema
* change update handling with variable for breack CCU2 (#3215)
* Update ordering (#3216)
* Docs update
* Flake8/pylint
* Add new docs requirements
* Update email validation (#3228)
🐬
* Fix email validation (fixes#3138) (#3227)
* Upgrade slacker to 0.9.25 (#3224)
* Upgrade psutil to 4.3.1 (#3223)
* Upgrade gps3 to 0.33.3 (#3222)
* Upgrade Werkzeug to 0.11.11 (#3220)
* Upgrade sendgrid to 3.4.0 (#3226)
* Bluetooth: keep looking for new devices (#3201)
* keep looking for new devices
* Update bluetooth_tracker.py
* change default value for tracking new devices
* remove commented code
* dlink switch added device state attributes and support for legacy firmware (#3211)
* Use voluptuous for free mobile (#3236)
* Use voluptuous for nma (#3241)
* Improve 1-Wire device family detection and error checking. Use volupt… (#3233)
* Improve 1-Wire device family detection and error checking. Use voluptuous
* Fix detection of gpio connected devices
* Replace rollershutter and garage door with cover, add fan (#3242)
* Use voluptuous for Alarm.com (#3229)
* Use voluptuous for gntp (#3237)
* Use voluptuous for pushbullet, pushetta and pushover (#3240)
* Migrate to voluptuous (#3230)
🐬
* Fix mFi sensors in uninitialized state (#3246)
If mFi sensors are identified but not fully assigned they can
have no tag value, and mficlient throws a ValueError to signal this.
This patch handles that case by considering such devices to always
be STATE_OFF.
* Use voluptuous for PulseAudio Loopback (#3160)
* Migrate to voluptuous
* Fix conf var
* Use voluptuous for Verisure (#3169)
* Migrate to voluptuous
* Update type and add missing config variable
* thread safe modbus (#3188)
* Upgraded fitbit to version 0.2.3 which fixed oauthlib.oauth2.rfc6749.errors.TokenExpiredError: (token_expired) (#3244)
* update ffmpeg version to 0.10 add get image to camera (#3235)
* Migrate to voluptuous (#3234)
* fix bugfix with unique_id (#3217)
* Zwave climate fix and wink cover. (#3205)
* Fixes setpoint get was done outside loop
* zxt_120
* Wink not migrated to cover
* Clarifying debug
* too long line
* Only add 1 device entity
* Owntracks voluptuous fix (#3191)
* Zwave set temperature fix (#3221)
* If device was off set target temp would not work.
* Changed to use a workaround just for Horstmann HRT4-ZW Zwave Thermostat
* Wrong Horseman id
* style changes
* Change PR to suggestion on gitter (#3243)
* Reload groups (#3203)
* Allow reloading groups without restart
* Test to make sure automation listeners are removed.
* Remove unused imports for group tests
* Simplify group config validation
* Add prepare_reload function to entity component
* Migrate group to use entity_component.prepare_reload
* Migrate automation to use entity_component.prepare_reload
* Clean up group.get_entity_ids
* Use cv.boolean for group config validation
* fix remove listener (#3196)
* Add linux battery sensor (#3238)
* protect service data for changes in calls (#3249)
* protect service data for changes in calls
* change handling
* move MappingProxyType to service call
* Fix issue #3250 (#3253)
* Minor Ecobee changes (#3131)
* Update configuration check, ordering, and constants
* Make API key optional
* issue #3250
* Add voluptuous to ecobee (#3257)
* Use constants and update ordering (#3261)
* Add support for complex template structures to data_template (#3255)
* Improve yaml fault tolerance and handle check_config border cases (#3159)
* Use voluptuous for nx584 alarm (#3231)
* Migrate to voluptuous
* Fix pylint issue
* fastdotcom from pypi (#3269)
* Use constants and update ordering (#3268)
🐬
* Use constants and update ordering (#3267)
🐬
* Add additional template for custom date formats (#3262)
I can live with a few visual line breaks 🐬
* Use constants and update ordering (#3266)
* Updated braviatv's braviarc version to 0.3.5 (#3271)
* Use voluptuous for Device Sun Light Trigger (#3105)
* Migrate to voluptuous
* Use default
* Point to master till archive is back (#3285)
* Pi-Hole statistics sensor (#3158)
* Add Pi-Hole sensor
* Update docstrings and remove print()
* Use None for payload
* Added stuff for support range setting (#3189)
* cleanup Homematic code (#3291)
* cleanup old code
* cleanup round 2
* remove unwanted platforms
* Update frontend
* Hotfix for #3100 (#3302)
* Fix TP-Link Archer C7 long passwords (#3225)
* Fix tplink C7 long passwords
Fixes an issue where passwords longer than 15 chars could not log in to Archer C7 routers.
* Truncate in correct place
* Add comment about TP-Link C7 pass truncation
* Fix lint error
* Truncate comment at 79 chars not 80
* modbus write registers service (#3252)
* Fix bloomsky platform discovery (#3303)
* Remove dev tag
* Host should be optional for apcupsd component (#3072)
* Zwave climate Bugfix: if some setpoints have different units, we should fetch the o… (#3078)
* Bugfix: if some setpoints have different units, we should fetch the one that are active.
* Move order of population for first time detection
* Default to config if None unit_of_measurement
* unit fix (#3083)
* humidity slider (#3088)
* If device was off target temp was null. Default to Heating setpoint (#3091)
* Fix for BLE device tracker (#3019)
* Bug fix tracked devices
* Added scan_duration configuration parameter
* fix homematic climate implementation (#3114)
* Allow 'None' MAC to be loaded from known_devices (#3102)
* Climate and cover bugfix (#3097)
* Avoid None comparison for zwave cover.
* Just rely on unit from config for unit_of_measurement
* Explicit return None
* Mqtt (#11)
* Explicit return None
* Missing service and wrong service name defined
* Mqtt state was inverted, and never triggering
* Fixed Homematic cover (#3116)
* Add missing docstrings (fix PEP257 issues) (#3098)
* Add missing docstrings (fix PEP257 issues)
* Finish sentence
* Merge pull request #3130 from turbokongen/zwave_fixes
Bugfix. climate and covermqt
* Back out insteon hub and fan changes (#3062)
* Bump version
* Special frontend build for 0.27.2
* First draft for cover component
* Efficiency from @martinhjelmare
* migrate demo
* migrate demo test
* migrate command_line rollershutter
* migrate command_line test
* migrate rpi_gpio garage_door
* make some abstract methods optional
* migrate homematic
* migrate scsgate
* migrate rfxtrx and test
* migrate zwave
* migrate wink
* migrate mqtt rollershutter and test
* requirements
* coverage
* Update mqtt with garage door
* Naming and cleanup
* update test_demo.py
* update demo and core
* Add deprecated warning to rollershutter and garage_door
* Naming again
* Update
* String constants
* Make sure set_position works properly in demo too
* Make sure position is not set if not available.
* Naming, and is_closed
* Update zwave.py
* requirements
* Update test_rfxtrx.py
* fix mqtt
* requirements
* fix wink version
* Fixed demo test
* naming
* Added support for serial HM-Z19 CO2 sensor
* Minor pylint bug fixes
* Added new files to .coveragerc
* Removed newline
* Changes in requirements after change of pmsensor library
* Change the implementation of default name
* Check if serial interface is working before adding the sensor
* Maximum sensor value is 5000ppm
The repository already merged the pull request adding python3 support.
root is no longer required to use the gpio.
Signed-off-by: Roi Dayan <roi.dayan@gmail.com>
* Added Bluetooth Low Energy device tracker
* Added new file(s)
* Fixed pylint errors
* Remove traling zeros from device names
* recreated deleted file
* Added requirements
* Renamed to bluetooth_le tracker
Removed gattlib from tests
Minor code cleanup
* - fixed .coveragerc bug
- changed discovery algorithm, new devices will only be added if seen 5 times to make sure
HA doesn't blow the database with devices just passing by
* Add action and callback support to html5 (#2855).
Remove registrations from the callback view since we always get the latest anyway.
We dont put an audience in the claims so we will never hit this error.
Bring tests back up to where they were before callbacks.
Only import jwt where necessary
Fix bracket spacing errors
Fix JWT decode check for loop
Remove stale comment.
Add tests for the callback system.
Shorten line
Disable pylint broad-except and change e to jwt_decode_error.
Verify expiration
Remove duplicate jwt.exceptions.DecodeError
Catch no keys matched and return False
* Switch to using registrations for callbackview instead of json_path
* Only check for URL and such if the data object actually exists
* raise instead of return
* cleanup decode_jwt
* Clean up JWT errors
* Correctly set status_code to 401
* Improve JWT by adding target to claims and attempting to check the given target for a decode match first, as well as pass the target through in the event payload.
* Add tag support and fix formatting issues
* Pass through any keys that dont apply to the payload into the notification.data dictionary
* Remove stale print
* Pass back the data dictionary if it exists
* Actually put the default url even if a notify payload dictionary doesnt exist
* pylint, flake8
* Add subscription validation
* Add validation for the callback event payload and use constants where possible
* Use HTTP_UNAUTHORIZED instead of 401
* Change callback dictionary to dict instead of cv.match_all
* Fix up tests and make subscription required
* Whoops, that test was supposed to fail
* Use the result of CALLBACK_EVENT_PAYLOAD_SCHEMA as event_payload
* Add a test for html5 callback decode_jwt where the device has been renamed since notification has been sent.
* Remove the loop through logic, assume that target is always in JWT
* Always return something instead of possibly None.
* Update frontend
* HP ILO component
* HP ILO component
* Add Onboard Administrator sensor
* Add Onboard Administrator sensor
* Add period to first line
Fix D400 error on line 1
* Initial work to add Chrome Push Notification support
* Remove push.js from home-assistant since it is now in Polymer
* Chrome->HTML5, general cleanup/fixes
* Make html5 generic, move manifest.json into frontend so that we can dynamically add the gcm_sender_id
* Pylint, flake8, pydocstyle frontend init
* HTML5 push fixes
* Update polymer
* Remove crypto req
* Add notify default platform.
* Fix HTML5 push
* Registration fixes
* Linting fix
* pep257 fix
* Add tests
* pep257 fix
* Update frontend
* Add support for GPSD
* Add gpsd.py
* Check if socket is open
* Fix pylint issue
* Rename file to be a sensor
* Update for being a sensor
* Rework for being a sensor
* New component to interface with a pilight-daemon for RF send/receive
* Fix bug that changed the received data, add connected flag, clean up
* New pilight switch component
* New optional whitelist filter to filter uninteressting devices
* Add pilight
* PEP8: too long lines, white spaces
* To keep up the good coverage ...
* PEP 257
* pylint enhancements
* pylint enhancements
* PEP 257
* Better HA config validation and cleanup following code review for #2742
* Fix requirenments to require fixed pilight version
* Change config validation to use voluptuous
* Pilight switch exclude not needed due to wildcard pilight exclude
* Enhance configuration parsing using voluptuous
* Update to latest Plex API, add music support.
* Fix PyLint errors.
* Update Plex sensor module to latest PlexAPI.
* Oops - update Python sensor import.
* According to PlexAPI docs, this is the new API for Plex Pass members.
* More pylint STFUs.
* Move pylint suppression.
* Use plexapi NA type directly.
* Pylint objects to short variable names.
The 0.3.1 version of the library includes fixes for time syncing the
thermostat under the covers when needed. All changes are done on the
library side, we just need to bump the required level in home
assistant.
Instead of always assuming we want to change the heat, instead use the
setback attribute which sets heat / cool setback based on current HVAC
mode. This means that the proliphix thermostat will do sensible things
during cooling season.
* slugify() for dev_id (fixes#2162) [Keep space replacement to not impact known_devices.yaml]
* pyicloud upgrade 0.9.1
* config validation
* Only poll icloud every 4 minutes...
* Immediately pull device state on HASS start
* Added new test with icloud char e' acute [chr(233)]
* Suppress pyicloud logging
* Major rewrite of the KNX multi address device. This class wasn't used before, but the new class will be the base for the LNX thermostat module
* newer KNXIP version needed as the previous version had a serious bug
* Update knxip to later version
* Added thermostat module
* First implementation of a KNX thermostat module
* Minor cleanup
* Removed unsed code
* Add __main__ type hints
* Fix most errors of __main__
* Add ignore for script.run()
* Add type annotations for from_config_dict and from_config_file
* Fix errors
* Fix requirement error
* Add mypy type check to tests
* Enable travis typing check
* Messed up the tox deps
* Laxer type checker
* Add power attribute to switch.
* Move device_state_attributes into base class.
* Fix imports following refactor.
* Bump pyvera version - should add contributed support for older (UI5) version dimmers and locks.
* Refactor device lookup to be based on vera classes, push category back into library.
* Add generic power attribute, fix inherited class order bug.
* Tidy.
* initial support for Join notifier
add more functions for Join
* rename to joaoapps_join
add message default in schema
move api_key check
* move special join services to their own component
update coveragerc and requirements_all
add icon and smallicon
* Implementation of a KNX platform driver and a KNX switch
* Starting working on a KNX thermostat implementation
* Removed KNX thermostat implementation from this branch again
* Make gateway parameter optional (can be auto-detected in many cases)
* Removed check for double initialisation
* KNX messages now will be handled internally and not send to the Home Assistant message bus
* Call update_ha_state only if should_poll is false
* Removed unused HASS variable
* knxip library version changed
* pylint optimization
* New Switch Platform: TPLink Switch (HS100 / HS110)
### Information
The TPLink switch platform allows you to control the state of your TPLink Wi-Fi Smart Plugs.
Supported devices (tested):
HS100 (UK)
It should also work with the HS110.
To use your D-Link smart plugs in your installation, add the following to your configuration.yaml file:
"""
# Example configuration.yaml entry
switch:
platform: tplink
host: IP_ADRRESS
name: TPLink Switch
"""
### Configuration variables:
host (Required): The IP address of your TPlink plug, eg. http://192.168.1.105
name (Optional): The name to use when displaying this switch.
* Update tplink.py
Bug fixes
* Separate to a standalone library
* Removed unnecessary imports
* Code cleanup and update reference library link
* TPLink switch support (#2453)
* updated requirements
* Switch to SQLAlchemy for the Recorder component. Gives the ability to use MySQL or other.
* fixes for failed lint
* add conversion script
* code review fixes and refactor to use to_native() model methods and execute() helper
* move script to homeassistant.scripts module
* style fixes my tox lint/flake8 missed
* move exclusion up
* Stick version numbers
* Move elevation to core config
* Migrate forecast test to requests-mock
* Migrate YR tests to requests-mock
* Add requests_mock to requirements_test.txt
* Move conf code from bootstrap to config
* More config fixes
* Fix some more issues
* Add test for set config and failing auto detect
* Added Sony Bravia support to HA
* Improvements to make it work on my poor raspberry 1
* Just a typo
* A few fixes in order to pass pylint
* - Remove noqa: was due to the 80 characters max per line restriction
- Move communication logic to a separate library at https://github.com/aparraga/braviarc.git
- Added dependency and adapt the code according to that
* A few improvements
* Just a typo in a comment
* Rebase from HM/dev
* Update requirements by executing the script/gen_requirements_all.py
* More isolation level for braviarc lib
* Remove unnecessary StringIO usage
* Revert submodule polymer commit
* Small refactorization and clean up of unused functions
* Executed script/gen_requirements_all.py
* Added a missing condition to ensure that a map is not null
* Fix missing parameter detected by pylint
* A few improvements, also added an empty line to avoid the lint error
* A typo
* Created a new platform for envisalink-based alarm panels (Honeywell/DSC)
* Added a sensor component and cleanup
* Completed initial development.
* Fixing pylint issues.
* Fix more pylint issues
* Fixed more validation issues.
* Final pylint issues
* Final tweaks prior to PR.
* Fixed final pylint issue
* Resolved a few minor issues, and used volumptous for validation.
* Fixing final lint issues
* Fixes to validation schema and refactoring.
add option to name in config
fix const import
use plexapi
add myplex support for remote access
use first server if server not specified
use list comprehension
use dictionary comprehension
* Added Pandora media player utilizing the Pianobar client
* Added Pandora to .coveragerc ignore
* Fixes some docstring formats in Pandora
* More minor formatting tweaks for Pandora
* Eliminated non-portable assumption from Pandora component
* Updated Pandora to properly update currently-playing song.
* Docstring fixes in Pandora
* Added check to ensure Pianobar client is available in path for Pandora.
* Made Pandora client verification a function instead of method.
* Better handling of dependency verification in Pandora.
* WSGI based request handler
with a bit of polishing
Signed-off-by: eagleamon <joseph.piron@gmail.com>
* removed stale comment and fixed version, but failed tests do not seem to be related
* removing the wrapper hack
* added in requirements file
* Found the caved in lint error..
* Introducing the Netatmo component
As Netatmo is providing several type of device (sensor, camera), a new Netatmo
component needs to be created in order to centralize the Netatmo login data.
Currently this change only impacts the Netatmo Weather station
* Add new Netatmo library
This new API will provide access to the Welcome Camera
* Basic support for Netatmo Welcome camera
This change introduces support for Netatmo Welcome camera. Currently, it will
add all detected camera to Home Assistant, camera filtering (similar to the one
used for weather station modules) will be added later
* Remove useless REQUIREMENTS
* Fixes for Netatmo Welcome support
* Allow to filter Welcome cameras by name and/or home
* Update requirements for Netatmo components
* Fix multi-camera support for Welcome
* Fix pep8 error/warning
* This commit also adds improved logging for bad credentials
* Add Throttle decorator for Welcome update function
As the update function updates the data for all cameras, we should prevent this
function to be called several time during an interval
* Removed webcolors dependency in favor of dictionary lookup.
* Fixed code style errors.
* Moved color dictionary to module per suggestion.
* Removed try/except per suggestion.
Unfortunately, Ubiquiti changed their (supposedly versioned) API in
3.2.0 which causes us to have to refer to cameras by id instead of
UUID. The firmware for 3.2.x also changed the on-camera login procedures
and snapshot functionality significantly.
This bumps the requirement for uvcclient to 0.9.0, which supports the
newer API and makes the tweaks necessary to interact properly.
* Added Osram Lightify light component
* Added color temperature and fade transition support to Osram Lightify
* Added Osram Lightify light component
* Added color temperature and fade transition support to Osram Lightify
* Updated docstring
* Added osramlightify to ignore list on coveragerc and updated docstrings
* Fixed linting issues
* Initial support for EnOcean
Tested to work with:
- Eltako FUD61 dimmer
- Eltako FT55 battery-less switch
- Permundo PSC234 (switch and power monitor)
* Rerun gen_requirements_all.py
This is a fair chunk of the way towards adding a WSGI compatible stack
for Home Assistant. The majot missing piece is auth/sessions. I was
undecided on implementing the current auth mechanism, or adding a new
mechanism (likely based on Werkzeug's signed cookies).
Plenty of TODOs...
* Added the `lgtv` platform to control a LG Smart TV running NetCast 3.0
(LG Smart TV models released in 2012) and NetCast 4.0 (LG Smart TV models released in 2013).
* Fixed multi-line docstring closing quotes
* Rename lgtv to lg_netcast
* Rename lgtv to lg_netcast
* Extracted class to control the LG TV into a separate Python package 'pylgnetcast' and changed requirements accordingly.
* regenerated requirements_all.txt with script
* now uses pylgnetcast v0.2.0 which uses the requests package for the communication with the TV
* fixed lint error: Catching too general exception Exception
* Add support for providing color_name which accepts a CSS3 valid, human readable string such as red or blue
* Forgot the schema validation!
* ugh farcy
* use html5_parse_legacy_color for more input options
* Add webcolors==1.5 to setup.py
* Block pylint no-member errors on tuple
* add color_name_to_rgb test
* whoops
* revert changes to individual platforms
* If color_name is set, pop it off params and set rgb_color with it
* Forgot to reset wink.py
* Import the legacy function as color_name_to_rgb directly
* reset test_color.py
* Improve light services.yaml
* AWS SNS notify platform
* Attach kwargs as MessageAttributes
* Initial pass of AWS SQS platform
* Add Lambda notify platform
* Remove unused import
* Change single quotes to double quotes because I am crazy
* Forgot to run pydocstyle
* Improve context support for Lambda
* compress the message_attributes logic
* Added GPM Desktop Plaeyr component
* Updated requirements_all.txt
* Pylint fix
* Updated GPMDP.py to include @balloob's comments
* Updated to work with the latest version of GPMDP
* Removed setting "self._ws.recv()" as a variable
* Made line 52 shorter
* Updated to check weather it is connected or not
* Pylint and @balloob fixes
* Updated with simplified code and pylint fix
* Made `json.loads` shorter
* Pylint fix
* Added QwikSwitch platform
farcy - worst than my english teacher
* Clean up comments
* Import only inside functions
* Moved imports, no global var, load_platform
* add_device reworked
* Only serializable content on bus
* Fixed imports & removed some logging
* initial support for generic 433mhz gpio adapters
* rpi-rf: refactor id_on/id_off to code_on/code_off
fits the purpose better and improves understanding
* rpi-rf: use v0.9.4
* rpi-rf: update features and dependencies to v0.9.5
includes the ability to optionally specify a protocol for each switch
* rpi-rf: remove explicit RPi.GPIO dependency
already a dependency of the rpi-rf module
* rpi-rf: make setting gpio, code_on and code_off mandatory
* rpi-rf: remove unused value_template
* rpi-rf: only enable TX once if there are switches
* Bump version of pymysensors to 0.6, which includes the tcp gateway.
* Update requirements_all.txt.
* Replace CONF_PORT with CONF_DEVICE and ATTR_PORT with ATTR_DEVICE.
* Add tcp_port in config.
* Try to guess if tcp or serial gateway is configured, by validating
device name as an ip address. If successful setup tcp gateway, if it
fails, setup serial gateway.
* Update device_state_attributes to show correct device, ethernet or
serial.
This tracker discovers new devices on boot and tracks bluetooth devices
periodically based on interval_seconds value. Devices discovered are
stored with 'BT_' as the prefix for device mac.
Requires PyBluez
* Initial Support for EQ3 Bluetooth Smart Radiator Thermostats
* tox runs successfully
* Moved device specific stuff to bluepy_devices library
* lint fix
Text Update
Additional additions and better support for volume, and mute. Cleanup
Added rxv to requirements_all
Added yamaha.py to .coveragerc
Made uppercase, and removed tabs
Added requirements variable
Added doc string for lint
Removed global variable, and simplified state as per balloobs suggestion
Refactored the component with balloobs suggestions
-Added import in the method
- Only get receiver information on init
- A bit of cleanup
Remove up and down volume
Uneeded as this is handled by set volume instead
Fixed a lint build error
More lint fixes
Removed unused imports
Lint Fixes
Simplified if statement
Minor refactoring since the init calls update.
Fixed lint error
Just variable naming change
Added support for an optional name for the receiver.
Better error handling, a bit of refactoring based on balloobs suggestions
Fixed lint error.
Another lint error fix
Changed raise to return
Disable pylint error handling
Pylint broad exception
Made exception handling in the setup platform instead of the constructor.
Lint error fix
Refactored the way devices are found. This allows for multiple receivers
The rewrite addresses a problem with the tellstick hardware dropping
commands when too many simultaneous calls is being made from HA. Also fixes a bug when the dim level was changed externally.
This breaks previous configurations.
The new config for tellstick is
```yaml
tellstick:
signal_repetitions: X
```
Lights and Switches are detected automatically.
Sensors work like before because they do not share any functionality with the other devices and they also needs a complete other configuration.
The default configuration of the mFi controller generates self-signed
certificates which are valid for short periods of time, and which are
regnerated on start or as needed. This makes requests mad. Since most
people will be using the self-signed certificates anyway, add options
to let them choose non-TLS, or unverified connections if they want/need.
This bumps the mficlient requirement to 0.3.0 for proper handling of
verify=False.
Uses the (schiene)[https://pypi.python.org/pypi/schiene/0.14] API to communicate with the webserver of bahn.de
and pulls iformation about a specific connection from the (bahn.de)[http://www.bahn.de/p/view/index.shtml]
webpage. The departure time of the next train for the given connection is shown.
In case of delay, the delay is also shown. Additional `ATTRIBUTES` are used to
inform about e.g. the type of the train, price and if it is ontime.
Usage:
sensor:
platform: deutsche_bahn
from: name_of_start_station
to: name_of_final_station
Problems:
I'm testing it for quite some time, but I have never seen the `ATTRIBUTES` in case
of a delayed train. The `ATTRIBUTES` are directly passed from the `schiene` API. So this
usecase has not been tested yet.
deutsche_bahn ist not supporting the `schiene` api unlike in the swiss_public_transport case.
It's not guaranteed that `schiene` will work forever, infact it can happen that Bahn AG will
intentionally brake the API at some point. In the past Bahn AG has not allways been very supportive
to the opensource community.
This adds tests for the uvc camera module. It's a good thing too,
because I found a few bugs which are fixed here as well:
- Graceful handling of non-integer port
- Failure to take the first host that works when probing host,internalHost
- Failure to detect if neither of them actually work
This also converts the code to only call add_devices once with a listcomp.
Ubiquiti's Unifi WAP infrastructure has a central controller (like mfi and uvc)
that can be queried for client status. This adds a device_tracker module that
can report the state of any client connected to the controller.
This bumps the somecomfort requirement to 0.2.1 to pull in a change
that makes handling no-fan systems graceful. Adds a test that should
prove it gives us what we want.
If no fan, then fan is always idle and fanmode is None.
This allows you to get every door, window, smoke, etc zone from your security
panel into HA. This uses the live eventing feature of pynx584, which means you
get instantaneous signaling into HA when a door opens or something happens,
which is handy for automating lights on when doors open after dark, etc.
Requires update to pynx584 0.2
This is extremely useful if you want to support wemos that are on
another subnet or across a VPN. It also lets you sidestep the discovery
process, which is problematic for a lot of people and situations.
In order for this to work, we need to bump the pywemo requirement to
0.3.10, which includes my changes to make this possible.
WeMo devices can be manually configured by adding a static section to
the config, like this:
switch:
platform: wemo
static:
- 192.168.100.5
- 192.168.100.6
When we update the mFi server for the state of a switch, the new
state is not always reported immediately if we update right after
the action (the server is not RESTful).
This patch adds some internal target-state handling to report the
desired state on the next poll, allowing any subsequent polls to
override that state.
Also, bump the version requirement for mficlient to 0.2.2 to absorb
a bug fix.
This adds support for NetworX-based alarm panels and should work for
any such panel equipped with a NX584 serial interface module. This
includes NX-4/6/8/8E, where the NX8E has this interface built-in.
It requires the pynx584 module, and requires running the server
component somewhere that has connectivity to the panel via serial,
which may include a serial-over-lan connection.
* The application of the version check in unit_of_measurement was
messed up after the last refactor. Fix that again.
* An error could occur in device_state_attributes if there was a
mismatch between used value_type in the device and mysensors
version in config. Add try... except to handle that.
Bump pyvera version.
Bump pywemo version.
Add unavailable status before properly initialised for maker and insight.
This adds support for Ubiquiti's UniFi Video cameras via their
NVR device (or service). By configuring just the address of the
NVR and a valid API key, all cameras are discovered and enabled,
including direct-to-camera image snapshot-based video support.
Major bugfix. ``` get_bulbs ``` and similar methods were always returning empty lists.
Better unit tests have been added to https://github.com/bradsk88/python-wink to avoid this regression.
Support the SCSGate device. This will allow home-assistant to interact
with BTicino/Legrand MyHome system.
Signed-off-by: Flavio Castelli <flavio@castelli.me>
The proliphix nt10e is an early network thermostat that supports an
HTTP interface. This adds basic support for it to home-assistant (get
/ set heating setback).
* Wrap existing SerialGateway instance instead of subclassing
SerialGatewat class.
* Add S_BINARY in switch platform only in version 1.5 of mysenors api.
* Use version 0.4 of pymysensors.
* Show gateway port as state attribute.
Entity may not be picked up exactly by the speech recognition. Instead
of doing an exact string match, look for names which are phonetically
similar and choose the best match above a certain threshold.
This helps as entity names may often be pronoun's (Dave's bedroom) and
this allows for some minor mistakes i.e "the bedroom" will successfully
match against a switch called "bedroom"
It introduces a new library dependency, fuzzywuzzy for comparisons.
* Add support for multiple serial gateways.
* Fix serialization of python objects by adding dict representation of
classes.
* Add support for showing more than one child value type per entity.
The entity state is always only one value type. This is defined by
the platform value types. Value types that are not defined as the
platform value type are shown as state_attributes.
* Add more unit of measurement types.
* Clean up code.
This change is in preparation for adapting this component to support multiple
LimitlessLED bridges. Ultimately LedControllerPool helps to maintain the
mandatory 100ms pauses across multiple controllers so messages are reliably
received.
Revised main to use frontend and demo strings rather than importing
their domains.
Removed submodule validation.
Moved local library mounting to the bootstrap module and out of core.
Added requirements_all.txt for all dependencies.
Made core dependencies looser.
Small updates to setup.py.
Pascal Vizeli
Paulus Schoutsen
Fabian Affolter
Teagan Glenn
William Scanlon
Brian Karani Ndwiga
Nolan Gilley
Marcelo Moreira de Mello
Christian Brædstrup
Heiko Rothe
Robbie Trencheny
Tomi Tuhkanen
happyleavesaoc
Johann Kellerman
Per Sandström
Daniel Høyer Iversen
Teagan Glenn
Open Home Automation
John Arild Berentsen
Greg Dowling
Martin Hjelmare
Henning Dickten
Roi Dayan
Juggels
Daniel
D.-L.Pohl
Dean Camera
Sean Dague
Cameron Bulock
Neil Lathwood
Fabian Heredia Montiel
Malte
pavoni
rhooper
Daniel Matuschek
GadgetReactor
Brent
patkap
Matthew Treinish
Dan Cinnamon
Antonio Párraga Navarro
Phil Kates
Nick Touran
Joseph Piron
Thiago Oliveira
Hugo Dupras
mikebarris
Dan Smith
Sam Riley
Jacob Tomlinson
Olimpiu Rob
rubund
Scott Bartuska
Josh Wright
wokar
Rowan
Richard Cox
froz
Ellis Percival
deisi
Erik Eriksson
Brad Johnson
Micha LaQua
Bart274
Fabian Affolter
sander76
Dennis Karpienski
Dan
Manoj
Alexander Fortin
Markus Peter
Jan Harkes
OpenDave15
Florian Holzapfel
Andrew
joopert
William Scanlon
Florian Holzapfel
bradsk88
Stefan Jonasson
Paulus Schoutsen
Justin Moy
Malte Deiseroth
Rowan Hine
infamy
happyleavesaoc
Eric Rolf
Eric Rolf
Flyte
carlosmgr
Tim
Flavio Castelli
Michael Kutý
Dean
hydreliox
Joseph Hughes
sfam
Daren Lord
pavoni
pavoni
Erik
Erik
kevinpanaro
David Edmundson
caius
andylockran
Daniel Hoyer Iversen
miniconfig
Oliver van Porten
Tom Duijf
Todd Ingarfield
Andrew Thigpen
Alan Bowman
Michael Auchter
Adrien Brault
Stefan Jonasson
Jeff Schroeder
zyell
Ryan Kraus