* Update Plex platforms together
* Remove unnecessary methods
* Overhaul of Plex update logic
* Apply suggestions from code review
Use set instead of list
Co-Authored-By: Martin Hjelmare <marhje52@kth.se>
* Review suggestions and cleanup
* Fixes, remove sensor throttle
* Guarantee entity name, use common scheme
* Keep name stable once set
* Bump adguardhome to 0.3.0
* Add a more user friendly version handling and added logs
* ✏️ Fixes spelling error in abort messages
* ✏️ Error messages improvements, suggested by cgtobi
* Add climate service to Homematic IP Cloud to select the active profile
* Add profiles ass presets
* fix spelling
* Re-Add PRESET_NONE for selection
* Boost is a manual mode
* Fixes based on review
* Fixes after review
* [homematic] Split color and effect support
There are homematic devices (like HmIP-BSL) that support color but
do not support effects.
Split the support, so that color can be supported even if effects are not.
* Make effect fully independent of color
If a device supports effects for e.g. just brightness, it shouldn't be coupled to the color
* Add report state config
* Add initial steps for local report state
* Use owner of system as user_id
* First working prototype
* Only report state if requested
* Add some good logging and adjust constant name
* Move jwt generation out to non member
* Move cache out to caller
* Remove todo about cache
* Move getting token out of class
* Add timeout on calls
* Validate config dependency
* Support using service key to do sync call when api_key is not set
* Make sure timezone is fixed for datetime dummy
* Use exact expire_in time
* Support renewing token on 401
* Test retry on 401
* No need to declare dummy key twice
* Correct some docs on functions
* Add test for token expiry
* Refactor the Somfy auth implementation
* Typing
* Migrate Somfy to OAuth2 flow helper
* Add tests
* Add more tests
* Fix tests
* Fix type error
* More tests
* Remove side effect from constructor
* implementation -> auth_implementation
* Make get_implementation async
* Minor cleanup + Allow picking implementations.
* Add support for extra authorize data
* move imports to top-level in recorder init
* move imports to top-level in recorder migration
* move imports to top-level in recorder models
* move imports to top-level in recorder purge
* move imports to top-level in recorder util
* fix pylint
* Added sinch integration (notify component)
* Updated requirements
* Fixes according to lint
* Update homeassistant/components/sinch/notify.py
Co-Authored-By: Andrew Sayre <6730289+andrewsayre@users.noreply.github.com>
* Update homeassistant/components/sinch/notify.py
Co-Authored-By: Andrew Sayre <6730289+andrewsayre@users.noreply.github.com>
* Update homeassistant/components/sinch/notify.py
Co-Authored-By: Andrew Sayre <6730289+andrewsayre@users.noreply.github.com>
* Adds @bendikrb as codeowner
* Imports to the top. Catching specific exceptions. Logic fixes
* Updated CODEOWNERS
* Reformatting (black)
* Added sinch component to .coveragerc
* Conform to pylintrc
* Okay, Mr. Black
* Fixed: Catching too general exception Exception
* add ability for MQTT device tracker to map nondefault topic payloads to zones
* update new parameter name and add abbreviation
* support for payload_home, payload_not_home, and payload_custom
* use constants STATE_NOT_HOME and STATE_HOME as defaults
* reference state constants directly
* add empty dict as default for payload_custom
* change parameter name for custom mapping of payloads to non-home zones to be more descriptive
* removed 'payload_other_zones' per ballobs review
* remove abbreviation for 'payload_other_zones'
* add tests for feature
* Add grid sensors
* Formatting
* Add possibility to add attributes
* Add optimizer attribute
* Remove bare 'except'
* add proper exception
* Remove return attribution 0
* Ad inverter attribution
* Style change
* Add attribute name to sensors constants
* SENSOR_TYPES alphabetical and snake_case lower
* Formatting
* forgot snake_case lower
* Add extra meter sensors
* add critical error for debugging
* Update sensor.py
* swam meter sensors
* Add suitable icons to meter reading
* Fix for pointless-statement
homeassistant/components/solaredge_local/sensor.py:173:8: W0104: Statement seems to have no effect (pointless-statement)
homeassistant/components/solaredge_local/sensor.py:192:8: W0104: Statement seems to have no effect (pointless-statement)
homeassistant/components/solaredge_local/sensor.py:349:16: W0104: Statement seems to have no effect (pointless-statement)
homeassistant/components/solaredge_local/sensor.py:356:16: W0104: Statement seems to have no effect (pointless-statement)
* Rename import energy sensor
* Insert feadback
* Change to debug info
* Add check if attribute name exist
* Remove unnecessary else
* Add return None if no attributes
* flake
* Install our core dependencies for mypy in azure
To match local setups and tox.
* Use "system" mypy in pre-commit instead of the "real" mypy hook
The results of mypy depend on what is installed. And the mypy hook
runs in a virtualenv of its own, meaning we'd need to install and
maintain another set of our dependencies there... no. Use the "system"
one and reuse the environment that is set up anyway already instead.
* Reintroduce needed ruamel.yaml type ignore
This ignore is required when ruamel.yaml is installed, and we want it
to be as it's part of the core dependency set.
* move imports to top-level in mqtt server
* move imports to top-level in mqtt configflow
* move imports to top-level in mqtt init
* move imports to top-level in mqtt vacuum
* move imports to top-level in mqtt light
* Added a new configuration boolean parameter on_off_inverted to KNX Climate component.
* Remove unexpected spaces around equals.
* Parameter name changed to on_off_invert and modified to new version of XKNX library.
* Dict[key] for required config keys and keys with default config schema values.
When an amcrest camera was unplugged and then plugged again
it was impossible to reconnect to it, since the old
auth token was reused while we need to use a new one.
In fact, the method that is called every minute to check
the camera availability is going to fail always since we're
reusing an old token.
By forgetting the token (setting it to None) when going offline,
we ensure that we'll regenerate it in the next commands thus allowing
to reconnect to the camera when it comes back online.
* add high_precision (current) temperatures
* bump client to use aiohttp for v1 client
* token saving now event-driven rather than scheduled
* protection against invalid tokens that cause issues
* tweak error message
* New sensor platform integration for Orange and Rockland Utility smart energy meter
* New sensor platform integration for Orange and Rockland Utility smart energy meter
* bumped the oru py version to 0.1.9
* Added PLATFORM_SCHEMA
Adde unique_id property
Changed logger level from info to debug when printing the updated sensor value
Set the SCAN_INTERVAL to 15 mins
Added exception handling durin init when creating the oru meter instance
* Various fixes base on the PR review
+ Added SCAN_INTERVAL for 15 mins
* fixed path to documentation
* Add improved scene support for input_select
* Add tests for reproducing input_select states.
* Add some comments.
* Add support for set_options
Allows defining the options for an input_select in a scene.
* Add tests for set_options in test_reproduce_state
* Execute for real instead of mock execution.
* Improve tests for HomematicIP Cloud
* create fixtures remove decorators
* removed further decorators
* remove last decorator
* improve exception handling
* removed not required coroutine
* use the correct place for mock
marker-high-levels and marker-low-levels may not exist in printer
attributes returned by CUPS, so we'll use .get() to avoid this and
default to None:
KeyError: 'marker-high-levels'
Fixes#27518
* Added apprise notification component
* flake-8 fixes; black formatting + import merged to 1 line
* pylint issues resolved
* added github name to manifest.json
* import moved to top as per code review request
* manifest formatting to avoid failing ci
* .coveragerc updated to include apprise
* removed block for written tests
* more test coverage
* formatting as per code review
* tests converted to async style as per code review
* increased coverage
* bumped version of apprise to 0.8.1
* test that mocked entries are called
* added tests for hass.service loading
* support tags for those who identify the TARGET option
* renamed variable as per code review
* 'assert not' used instead of 'is False'
* added period (in case linter isn't happy)
* Update the Alexa.LockController Unlock directive to include the lockState property in the context of the response.
* Added Test for Alexa.LockController Unlock directive to include the lockState property in the context of the response.
* Refactoring imports for tensorflow
* Removing whitespace spaces on blank line 110
* Moving tensorflow to try/except block
* Fixed black formatting
* Refactoring try/except to if/else
jjlawren
Santobert
Tim McCormick
Paulus Schoutsen
Hmmbob
David Bonnes
Franck Nijhof
shred86
Ville Skyttä
bouni
Greg Rapp
SukramJ
Quentame
guillempages
Joakim Plate
Brig Lamoreaux
foreign-sub
HomeAssistant Azure
Heine Furubotten
Bram Kragten
springstan
Malte Franken
Pascal Vizeli
Tomasz Jagusz
Tobias Efinger
Bendik Brenne
Tsvi Mostovicz
Raman Gupta
mvn23
Tiit Rätsep
Maciej Bieniek
scheric
Erik Montnemery
tombbo
Jeff Irion
Antonio Larrosa
kennedyshead
Robert Svensson
Josef Schlehofer
Andrey Kupreychik
cgtobi
Paolo Tuninetto
Bogdan Vlaicu
Michał Mrozek
Rolf K
quthla
AaronDavidSchneider
Luca Angemi
Brett T. Warden
Chris Caron
ochlocracy
javicalle
Steven D. Lander
Otto Winter
ju
Martin
Askarov Rishat
Moritz Fey
Daniel Perna
Patrik