* Add aurora sensor
* allow custom forecast threshold for aurora binary sensor
* move AuroraGateway functionality to Aurora data object to conform with HA standards
* Add fake support for turn on/off for Apple TV
When the device is "turned off", no requests are sent to the device.
When the setting "start_off" is set to true, the device starts in off
state.
* Fix async comments
* Clean up supported features
* Reconnect robustness, expose connection state.
- Expose connection status as rflink.connection_status state.
- Handle alternative timeout scenario.
- Explicitly set a timeout for connections.
- Error when trying to send commands if disconnected.
- Do not block component setup on gateway connection.
* Don't use coroutine where none is needed.
* Test disconnected behaviour.
* Use proper conventions for task creation.
* Possibly fix test race condition?
* Update hass import style
* Add support for the Open Energy Monitor Thermostat
* Fix linting errors
* Define an update method and local state
* fix linter
* Small tweaks.
Update oemthermostat version, default name and docstrings
* Fail to setup oem platform if connection fails.
* update requirements
* More tweaks to auth and exceptions
* Remove target temp
* Bump pwaqi to 1.4 to fix a typo in the underlying library.
* Update WAQI sensor to use pwaqi 2.0 which relies on AQICN public API.
This is a breaking change as the component now requires 'token' parameter.
* Fix lint
* Stop using entity_picture that is known to be bad.
* Only abandon image on 400 or 404 response
* Return is_permanent_failure as a third part of response
* Add debug printout
* Fix lint
* Fix lint
* [recorder] Add tests for full schema migration
* Remove leftover code
* Fix duplicate creation of sqlalchemy Index object
* It's that kind of day...
* Improve models_original docstring
* Add support for multiple devices to Tado device tracker
* Hound did not agree with my usage of spaces
* Two blank lines were expected
* Keep CONF_HOME_ID in the Tado file
* Make home_id optional
* Work with different API URLs depending on home_id being present
* Remove CONF_HOME_ID from HA's const.py file
* Missed removing CONF_HOME_ID from the import
* Add new sensor/history_stats component
* Add real unit tests
* Code style changes requested for pull request
* Remove time aliases & allow datetime values
* Reformat unit tests
* Remove all async behavior in history_stats
* Change duration format
* [recorder] Add tests for full schema migration
* Remove leftover code
* Fix duplicate creation of sqlalchemy Index object
* It's that kind of day...
* Improve models_original docstring
* new component telegram_webhooks
* keyboard support in telegram notify
* telegram_webhooks has no tests
* requirement like notify/telegram
* ops, requirements_all.txt needed for travis
* ops, requirements_all.txt is generated by script/gen_requirements_all.py
* check telegram trusted networks in web handler
* raise an event now
* use of hass.config.api.base_url
* more readable
* small cleanups
* Small style change for HA guideline
* fix lint
* revert return to origin
* Support away_mode as permanent hold and hold_mode as temporary hold.
* Add comments to explain code better. Remove indefinite hold preference
to be consistent with 'away_mode'.
* Fix arwn platform discover_sensors
The discover_sensors function can return either singletons or a list
of sensors. However the consumer was always expecting a list. This
fixes it to work in both cases.
* Add custom icons to arwn sensors.
This adds some custom icons for different kinds of weather sensors
that the arwn platform returns. Makes it a little easier to see what's
going on.
* Bumped up version to use 0.1.7 of Russound integration module.
Fixed bug arising from not supporting TURN_ON state (fixes issue https://github.com/home-assistant/home-assistant/issues/5012)
Implemented state support in 0.1.7 such that component state is returned from the actual AMP. (Still uses polling model though).
Tested it with home-assitant users @laf (original developer of the module) and @hofsta. Works fine with their Russounds.
* Made styling / compliance changes and updated correct version of russound module on requirements_all.txt.
* Changed handling of properties to be compliant with https://github.com/home-assistant/home-assistant/issues/4210
(Specifcailly added member variables for state, volume and source to cache these values, and introduced Update() method to set their values).
Now returns None if the selected source index that is returned from russound is greater than the length of the specified source list in the yaml config.
Removed unnecesary comment.
* Removed blank line after docstring.
* Removed updated() in class init and added True paramter to add_devices in setup_platform.
* Dropped the no longer needed self.update()
* Move core servcie from core to components
* add new handler for signals/exception
* Static persistent id
* Move unittest
* fix coro/callback
* Add more unittest for new services
* Address comments
* Update __init__.py
* improve warning message when template is none
* improve error message when template is none
* improve error message when template is none
* improve error message when template is none
* Mailgun notify service
* Update dependency to version 1.3
- The provided credentials (including the domain) are now checked during
startup, as requested by @balloob
- The domain name is now optional
- There's a new config item "sandbox" which indicates whether to use the
sandboxed domain in case the domain is not set
* Fix a few lint issues
* Disable lint check no-value-for-parameter
The nest-cam changes have now been merged into the upstream library, so
there is no need to track a specific branch.
Updating to 3.1.0 also fixes a structure parsing bug I was experiencing.
* Add mysensors device_tracker platform
* Add discovery of device_tracker platforms
* Enable discovery of device_tracker platforms that are not
DeviceScanner.
* Update signature of setup_scanner function in all affected platforms.
* Add test.
* Use discovery for mysensors device_tracker platform.
* Remove gps accuracy
* Small change to core like schema
* fix depency
* Add support for writing ID3 tags to the file for improved display in media players
* Lint and async fixes
* Use mutagen instead of taglib
* Fix tests
* Add fallback for album
* Requested changes
* move import
* Fix album name
* Change default options handling
* Move to member function / minor fix
* fix style
* fix lint
* change mutagen handling
* fix lint / add name to bytesio
* Update __init__.py
* Fix test, some cleanups
* Add mutagen exeption handling, fix tests
* fix mutagen taging
* Revert "Fix hue lightgroups not syncing state (#5702)"
* Use light_id in unique_id for Hue groups
* Make sure HueLight unique_id is unique
* Update hue.py
* Update hue.py
* Update hue.py
Previous code used the state topic which is obviously wrong:
- The state topic is already used to select optimistic mode.
- A light with only the state topic but no command topic would still announce the capability.
* Added error checking to the MIMEImage encoding for smtp.py
Added fallback to file attachment rather than inline image for images
without a known MIME
* PEP8 reqs to fix previous commit
* Fix validation of serial port on windows
* Use pyserial to check serial ports.
* Check that persistence file ends with either `.json` or `.pickle`.
* Change fix to not rely on pyserial
* Use generator expr instead of list comprehension
* Change CONF_DEFAULT_COLOR CV type
Changed vol.Optional(CONF_DEFAULT_COLOR, default=DEFAULT_COLOR) from cv.string to cv.ensure_list
This allows the optional parameter default_color to be picked up correctly and to function
the option needs to be specifed as follows:
default_color: [0,255,0]
Solution provided by @scossa2020 in issue #5338https://github.com/home-assistant/home-assistant/issues/5338
* Update hyperion.py
* Support for the Orage Livebox Play TV appliance
* Add liveboxplaytv to coveragerc
* Minor refactoring
* Update requirements
* Adjust comments
* Fix alignment
* Fix some coding-style issues highlighted by Travis CI
* The livebox play TV does not support playing media
* Lint: shorten line
* Remove unused callback function
* Remove redundant backslash
* Implement changes requested by balloob
* Don't error out if channel name or media url could not be retrieved
* Support current program (media title property)
* Remove unnecessary check
* Clean up: Remove another unnecessary check, _CONFIGURING variable and _playing attribute
* Update liveboxplaytv dependency to version 1.4.4
* Fix liveboxplaytv requirement
* Improve media state (support for playing and pause state)
* Update liveboxplaytv.py
* Index events time_fired to improve logbook perf.
* Updated implementation to track schema versions
* Added tests for schema migration support logic
* Rename check_schema to migrate_schema
* Remove redundant input validation which is already accomplished through
defined schemata.
* Rely on defined state attributes for hold mode.
* Remove misleading comment. This comment seems to assume that sleep
mode is a hold; it is a schedule instead. The code snippets in the
comment could never work.
* Remove use of constants for hold mode. Will be made irrelevant
by a planned change by nordlead2005.
* Support for Nuki.io smart locks
* Update requirements and add lock.nuki to .coveragerc
* lint: Re-organize imports
* Schedule a state update instead of calling directly update_ha_state
* Remove update requests altogether
* Make sure there is no IO inside properties
* Fix: nuki lock are all initialized as "lock.unnamed_device"
* Update pynuki to 1.2 to avoid an extra REST API call for each lock init
* Added door bell sensors
* Initial support for AC units.
* Added new device service
* Quirky Aros AC unit support
* Use super() everywhere and error checking for token request.
* Ignore camera sensors during setup of alarms.
* Added manufacturer/device attributes to all wink devices.
* Fixed style errors
* Fixed remaining lint errors.
* Prevent events about MQTT messages received to cause infinite loop when two HA instances are crossconfigured for mqtt_eventstream.
* Fix linting
* Publish all MQTT received events except incoming from eventstream. Also make it configurable.
* Fix for missing netatmo tags in 0.37
Also fix issue with SSL certificate for vpn_url
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* Netatmo welcome: vpn_url can be empty
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* add config floag to disable SSL verification for vpn_url
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* Import CONF_VERIFY_SSL from const
* Initial sketches of rflink component.
* Add requirement.
* Properly load configuration.
* Bump rflink for graceful parse errors and protocol callback.
* Cleanup, documentation and linting.
* More documentation, first sensor implementation (temp & hum).
* Add brightness/dim support for newkaku protocol.
* Use separate class for dimmables.
* Make sure non-dimmable newkaku devices are turned on.
* Move some code around, add switches. Support loading from config.
* Fix bug in ignoring devices.
* Fix initial state assumption.
* Improve reliability on invalid conditions.
* Allow configuration of group for new devices.
* Sensor icons.
* Fix parsing negative numbers.
* Correct icon.
* Allow sending commands serial.
* Pluralize.
* Allow adding sensors from config.
* Fix ignoring devices and bugs in previous commit.
* Share know devices so devices from configuration don't get added as lights.
* Lookup unit from value_key.
* Remove debug.
* Start implementing event protocol in place of packet protocol.
- Added first test suite for sensors.
- This currently breaks light and switch.
* Refactor switch component to fit new rflink changes. Add test suite.
* Fix style.
* Refactor and test lights. Bring coverage to 100%.
* Use non-broken and production tested rflink module.
* Update requirements.
* Bump for logging.
* Improve readability.
* Do not use global variable but keep known device state in intended place.
* Improve docs.
* Make icon support generic.
* Disable overriding icons in config, as it belongs in customization. Only keep custom icon for entities that are able to detect a icon based on the thing they represent (sensors in this case).
* Implement configuration schema, overall refactor of magic values.
* Fix bug in config/test wait_for_ack.
* Small refactors.
* Move command logic into separate class.
* Convert command sending logic to class based pattern instead of using the event bus.
* Start not using bus for rflink event propagation to platforms.
* Do not use event bus for all entity types.
* Fire an event on the bus for every switch incoming rflink command.
* Resolve lint errors, remove some old code.
* Known devices no longer need to be registered separately.
* Log bus events.
* Event callback is a..... callback.
* Use full entity id for events.
* Move event sending to entity.
* Log incoming events.
* Make firing events optional inline with rfxtrx.
* Add foundation for signal repetition.
* Add signal repetition config and tests.
* Make plain switchable type explicitly configurable.
* Enable default entity settings for automatically added entities as well.
* Prevent default configuration leaking accross entities.
* Make sure device defaults don't get overwritten by defaults further down.
* Don't let fast state switching and repetitions turn your house into a disco.
* Make repetitions more responsive.
* Disable on/off fallback on dimmables as it currently doesn't play nice with repetitions.
* Use rflink that allows send_command_ack to be safely cancelled.
* Reduce duplication and make repeat work for non-ack.
* Implement reconnection logic.
* Improve reconnection logic.
* Also cancel repetitions when entity state is changed due to external command.
* Update requirements.
* Fix linting.
* Fix spelling.
* Don't lie.
* Fix lint.
* Support for automatically creating protocol translation (fixes spaces in device names).
* Returned support for dimmable and on/off entity.
* Duplicate code to fix linting issues with inheritance.
* Allow overriding unit of measurement from config.
* Voice command API.AI. First import
* Fixes suggested by hound
* Fixing comments
* Fix pylint and pydocstyle errors
* Change how speech is defined
Also clean some unused constants, remove card type (not used), define
a message when action is not defined and improve the message when
action is unknown.
* Change how speech is defined
Clean some constants.
Improve error messages.
Delete card type, not used.
* Tests for new Api.ai component
* Use async_add_job to python compatibility. New test to measure response time
* Add async_action option to choose between waiting or not for the action to execute
* Travis-ci needs more time
* Removed timeout tests
* Removed timeout tests
* Added apiai to .coveragerc as specified by PR doc
* initial yeelight based on python-yeelight
* adapt yeelight's discovery code & suppress exceptions on set_default
* Support flash & code cleanups
Adds simple pulse for flashing, needs to be refined.
This commit also includes changing transition from seconds to milliseconds,
and cleans up the code quite a bit.
* cleanup code, adjust default transition to 350
* bump required version to 0.0.13
* Cleaning up and marking todos, ready to be reviewed
* Renamed back to yeelight.
* Removed effect support for now until we have some sane effects available.
* Add "breath" notification for flash, currently hidden behind a False check due to unknown issue not accepting it.
* TODO/open points are marked as such.
* Fix a typo in rgb calculation
* yeelight_<bulbtype>_<mac> for autodetected bulbs
hostname from mdns seems to vary
* Lint fixes, add music mode, fix flash
* Flash transforms now to red and back
* Fix lint warnings
* Add initial music mode.
* remove unused mode logging, move set_mode to turn_on
* Add save_on_change configuration variable
* yeelight: check if music mode is on before enabling it.
* Fix linting, bump required python-yeelight version
* More linting fixes, use import when needed instead of saving the module handle
* Use OR instead of + for features assignment
* Fix color temperature support, convert non-rgb values to rgb values in rgb()
* Fix typo on duration, thanks @qzapwy for noticing
* yeelight: fix issues from review, behave when not available
* Implement available()
* Fix transition to take seconds instead of milliseconds
* Fix default configuration for detected bulbs
* Cache values fetched in update()
* Add return values for methods
* yeelight: kwarg-given transition overrides config, slight cleanups
* change settings back to optional, request update when calling add_devices
* As future version of python-yeelight will wrap exceptions, we can handle broken connections more nicely.
* bump yeelight library version
* Remove unused import
* set the default only when settings are changed and not, e.g., when turned on by automation
* update comment & fix linting
* UPNP changes to allow a separate advertised IP and Port.
* Fixing lint.
* UPNP changes to allow a separate advertised IP and Port.
* Fixing lint.
* Update __init__.py
* Moved logic for advertised ip and port into config class.
* Commenting change for clarity.
* Spacing changes for PEP8
* Spacing Changes for PEP8
* Style Changes
* Bugfix sonos / refactor of sonos function for TTS
* fix unittest
* update service yaml
* restore group of a coordinator
* use group function to evaluate
* fix state flooting
* fix comments
* Implement echo config option for pilight
Pilight switches can get a receive code configured. If so they act on
received codes. In the current implementation "act on" means not only
to set the internal state, but also to send the code again. If the
receiver is directly parred with the switch, to act even if HA is not
running, this causes it to receive the signal twice because the HA
sends it again.
In my case this causes a dimmer to start dimming until I hit the switch
again.
This implements a "echo" argument for the receive codes that let the
user choose if a received signal should result in any sending or not.
If not, only the status of pilight will be updated.
The echo option defaults to True, as this was the default since now.
Simply set it to halse to disable this behaviour.
Signed-off-by: Jan Losinski <losinski@wh2.tu-dresden.de>
* Add documentation to set_state in switch/pilight.
Signed-off-by: Jan Losinski <losinski@wh2.tu-dresden.de>
* Added forecast support to DarkSky
modified: homeassistant/components/sensor/darksky.py
modified: tests/components/sensor/test_darksky.py
* Fix async_volume_up / async_volume_down (#5249)
async_volume_up / async_volume_down should be async versions of
volume_up / volume_down, not a async version of the default variants of
volume_up / volume_down.
The previous code always called into the mediaplayers set_volume_level,
and never into volume_up / volume_down.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
* adding a default icon "blind" to a PowerView blinds scene. (#5210)
* adding a default icon "blind" to a PowerView blinds scene.
* Adding icon property to define blind icon. Removed it from the state attributes dict.
* fixing lint error
* Added forecast support to DarkSky
modified: homeassistant/components/sensor/darksky.py
modified: tests/components/sensor/test_darksky.py
* Use SHA hash to make token harder to guess (#5258)
* Use SHA hash to make token harder to guess
Use hashlib SHA256 to encode object id instead of using it directly.
* Cache access token
Instead of generating a token on the fly cache it in the constructor.
* Fix lint
* Bugfix async device_tracker see callback (#5259)
* Add support for NAD receivers (#5191)
* Add support for NAD receivers
* remove self.update() in various methods
* remove setting attributes in various methods
* Change import to hass style
* Updated Config Validation, extended daily forecast to all supported types
* Fix style errors from previous commit, fix test since adding daily for all supported types
* Removed temperature from daily as it isn't supported
* Added forecast support to DarkSky
modified: homeassistant/components/sensor/darksky.py
modified: tests/components/sensor/test_darksky.py
* Updated Config Validation, extended daily forecast to all supported types
* Fix style errors from previous commit, fix test since adding daily for all supported types
* Removed temperature from daily as it isn't supported
* Revert "Bugfix camera streams (#5306)"
This reverts commit 4b43537801.
Revert "Version bump for kodi dependency (#5307)"
This reverts commit 6abad6b76e.
Revert "Add HMWIOSwitch to sensor, binary (#5304)"
This reverts commit 2c3f55acc4.
Revert "Remove GTFS default name & string change"
This reverts commit 6000c59bb5.
Revert "Update pyhomematic 1.19 & small cleanups (#5299)"
This reverts commit a30711f1a0.
Revert "[sensor] Add Dublin bus RTPI sensor (#5257)"
This reverts commit 1219ca3c3b.
Revert "Bugfix group reload (#5292)"
This reverts commit baa8e53e66.
Revert "Support for TrackR device trackers (#5010)"
This reverts commit f7a1d63d52.
Revert "Bump pywemo version."
This reverts commit dc937cc8cf.
Revert "Upgrade to voluptuous to 0.9.3 (#5288)"
This reverts commit d12decc471.
Revert "Upgrade distro to 1.0.2 (#5291)"
This reverts commit 64800fd48c.
Revert "Don't build Adafruit_BBIO - doesn't work on all platforms. (#5281)"
This reverts commit 9a3c0c8cd3.
Revert "Convert flic to synchronous platform. (#5276)"
This reverts commit eb9b95c292.
Revert "Upgrade to aiohttp 1.2 (#4964)"
This reverts commit e68e29e03e.
Revert "Fix TCP sensor to correctly use value_template (#5211)"
This reverts commit 1cf9ae5a01.
Revert "Cleanup language support on TTS (#5255)"
This reverts commit 3f3a3bcc8a.
Revert "Add last triggered to script (#5261)"
This reverts commit 467cb18625.
Revert "Bump flux_led version and make use of PyPi package (#5267)"
This reverts commit 34a9fb01ac.
Revert "Add support for NAD receivers (#5191)"
This reverts commit 3b59e169f1.
Revert "Bugfix async device_tracker see callback (#5259)"
This reverts commit 71fddd26eb.
Revert "Use SHA hash to make token harder to guess (#5258)"
This reverts commit 922308bc1f.
* Revert "Revert "Bugfix camera streams (#5306)""
This reverts commit 2ee8c44021.
* Update darksky.py
* Remove SPEED_MED from fan
* Add an Amazon Polly TTS platform
* Update boto library version for notify.aws_* platforms to match the tts.amazon_polly req
* Improve log line and add docstring to function
* Simplify config logic
* Remove duplicate logic
* Don't know how this got in here...
* initial options work
* Remove stale config option and only allow supported languages
* Make requested changes
* Polly is only supported in some regions
* Allow filename to contain underscores (for amazon_polly platform name), remove unnecessary default_lang, other small things
* Add options dict to service description
* Update keyboard_remote.py
I added a couple of events: keyboard_remote_connected and keyboard_remote_disconnected, useful to trigger some action (for example: play a sound)
I changed the way the component refers to the keyboard: not by "descriptor", but by name.
The fact is that the udev system doesn't always give a name link in /dev/input/by-id folder and the actual /dev/input/eventX file changes automatically.
For example, if I had my keyboard on /dev/input/event13 and then it disconnected, if something else connects to the system it will get the first input file available, that is /dev/input/event13. If the keyboard then reconnects, it will get /dev/input/event14, thus breaking the configuration.
Now it searches every time for the right input file.
The problem might be that, in case of ha upgrade, the pre-existing configuration won't work. I thing there are some guidelines here, but I am not sure.
I think it's inevitable: the initial idea to use a /dev/input/by-id/ symbolic link was good, but unfortunately it doesn't seem to work with bluetooth devices.
I haven't updated the documentation yet: I'm waiting for some ok about the change in configuration key names.
* Update keyboard_remote.py
That should do the trick.
You are right: device names can be duplicated, thus they're not reliable in case of multiple devices. Unfortunately, the only other information available is the physical address, even more complicated.
But in case you have just one keyboard remote of same model, the name works just fine. I'll put it in the documentation which, once the code is approved, I will promptly update.
* Update keyboard_remote.py
* Update keyboard_remote.py
* Update keyboard_remote.py
* Unwrap logger error
* ASUSWRT: Add IPv6 support when parsing neighbors
The regex for IPv6 should cover most cases, but it doesn't validate
whether IP is correct. It also might fail for some edge cases.
Also, ignore 'duid xx:xx:xx:xx:xx:xx:xx:xx:xx:xx' line in leases.
Closes#2814 - ASUSWRT doesn't support ipv6
* Update asuswrt.py
* Added new platform sky_hub
* added env to virtual environment gitingore
* Removed unuseful imports
* BT home hub 5 renamed to sky hub in the comments
* Added sky_hub to .coveragerc
* Added example configuration in sky_hub docstring
* sky_hub made compliant with test style standards
* homehub functions renamed to skyhub
* Update .gitignore
* Update .coveragerc
* Move isdevice validator under helpers.config_validation.
* Check that all persistence files are set and are unique if any is set
by user. This is necessary to avoid file name clashes.
* Check that a set persistence file has an existing and writable
directory.
* Check that a device is either a valid device file, "mqtt", or a valid
domain name or ip address.
* [image_processing/microsoft_face_verify] face recognition for automation
* Add platform for microsoft face identify
* add unittest for demo
* Add unittest for platform
* add a small sleep before reading the sensor
The read of the sensor might be incorrect if it's read too soon after the setup_input call. It might be isolated to my case where I rely on the the PI internal PULL, but once I added this sleep I never get false initial read. If you think this change is appropriate please merge it.
* Update rpi_gpio.py
* Update rpi_gpio.py
* Update rpi_gpio.py
* Add missing dependency in emulated_hue component.
On first startup after upgrade to 0.36, the emulated_hue componented failed to
start because the http component had installed the modules it depends on, in
this particular case 'aiohttp_cors' was missing.
* Include dependencies for the emulated_hue web server
Emulated_hue uses it's own 'web-server' component to handle hue related
discovery and config, so we need to make sure the required http modules are
made available before we are initialized.
We don't have to depend on the home-assistant http/api component because we do
not need to have the frontend to be initialized to handle emulated_hue, so we
can just import in the same set of requirements as the http component.
* Fix linting error
* Add support for Piglow
* Updated coverage and requirements
* Add support for Piglow
* Updated coverage and requirements
* Fix linting errors
* Fix linting errors
* Remove trailing whitespace
* Shorter lines
* Remove trailing whitespace
* Update piglow.py
* Pinned piglow version
* Remove unused method
* Remove unused imports
* Fix lint errors
* Update requirements all
* Updated Piglow to allow the component name to be changed
* Fix imports
* Pass in name
* The piglow platform now fails if it cannot detect the piglow device
* Tidy subprocess import
* cec client object
* cec command structure
* autodetect source
* volume support and native source select
* switch device
* media player device
* detecting of state
* friendly names
* hdmi cec properties
* presence detection
* simplified callbacks
* stable names
* renamed methods
* code cleanup
* name with vendor
* fixed standby call name
* fake standby/poweron
* domain switch
* domain switch
* async updating
* update separated
* cec -> hass event bridge
* fixed name generation
* code cleanup
* code cleanup
* icon constants
* code cleanup
* do not register unavailable devices
* discovery of deevices
* code cleanup
* cec device discovery
* moved method implementation into child
* service descriptions
* service descriptions
* service descriptions
* changed entity init sequence
* logging cleanup
* add remove as job
* closing cec, no service schemas
* correct iterate over dictionary
* Volume by commands
* threading
* logging minimized
* get load out of main thread
* naming cleanup
* get load out of main thread
* optimized discovery
* async where possible
* cleanup logging, constructors first
* pydoc
* formatting
* no async_update from out of loop
no hiding entities
removed redundant device_state_attributes
async updating presence
* no async
* working async cec
* cec in thirdparty lib
* cec initialized oudsice
* working without SIGSEGV
* rollbacked file changed by mistake
* sending of commands
* working with ha
* using hass loop and device driven updates
* version up
* version up
* Command types in pycec, cleanup for HA integration
* Removed media player, state moved to switch
* service descriptions
* requirements: pyCEC
* line width to 79
* doc
* doc
* overindentation solved
* HDMI to uppercase
* minimal dependency on cec
* removed unwanted line
* doc wording
* margin 79
* line continuation indent
* imperative doc
* lint: indentation
* fixed overindented
* fixed overindented
* fixed overindented
* fixed overindented
* order of imports
* PEP8
* keep signature of overriding
* removed redundant blank line
* fixed update call method (#4)
* Preparation for merge to upstream (#5)
* newer version of pyCEC
* updated services.yaml
* fixed lint scrpt to operate only on python files
* pycec version up
* update services
* no coverage report
* exclude non python files from lint
* lint only on python files
* Dev (#6)
* reordered
* sending nonserialized data through hass.data
* code formatting
* code formatting
* import order
* Dev (#7)
* newer version of pyCEC
* updated services.yaml
* fixed lint scrpt to operate only on python files
* pycec version up
* update services
* no coverage report
* exclude non python files from lint
* lint only on python files
* reordered
* sending nonserialized data through hass.data
* import order
* fixed object handling
* code formatting
* Backwards compatibility of hdmi_cec (#10)
* services:
power_on
standby
active_source
* new version of pyCEC (#12)
* newer version of pyCEC
* devices config (#13)
* getting device name from config
* shutdown fix (#14)
* correct call on shutdown
* remove misplaced annotations (#15)
* Preparation for merge to upstream (#5)
* newer version of pyCEC
* updated services.yaml
* reordered
* sending nonserialized data through hass.data
* services:
power_on
standby
active_source
* code formatting
* getting device name from config
* correct call on shutdown
* pyCEC version 0.3.6 (#18)
* newer version of pyCEC
* updated services.yaml
* sending nonserialized data through hass.data
* services:
** power_on
** standby
** active_source
* getting device name from config
* correct call on shutdown
* fork new thread on multicore machines
* support both config schemas: original and new (#16)
* volume press and release support (#17)
* support for media_player (#21)
* accept hexadecimal format of commands
* support for media player
* platform customization
* type constants
* Dev (#23)
* accept hexadecimal format of commands
* support for media player
* platform customization
* TCP CEC support (#24)
* accept hexadecimal format of commands
* support for media player
* platform customization
* preparing tcp support
* volume handling (#25)
* Incorporated CR remarks (#26)
* cleanup imports
* cleanup and enhance services description
* removed unwanted file
* implemented CR remarks (#27)
* pyCEC v0.4.6
* pined dependency version
* tighten service schemas
* requirements (#28)
* incorporate remarks from users (#32)
* home-assistant-31 make mute schema better (#31)
* pycec-30 pyCEC version up (#30)
* pycec-30 pyCEC version up (#30)
* home-assistant-30 OSD display name from configuration (#30) (#33)
* Home assistant 29 (#34)
* home-assistant-29 counting from 0 (#29)
* Home assistant 31 (#35)
* home-assistant-31 add support for mute-on and mute-off (#31)
* home-assistant-31 pyCEC version up (#31)
* Home assistant 31 (#36)
* home-assistant-31 Limit OSD name to 13 chars (#31)
* home-assistant-31 Limit OSD name to 13 chars moved to CEC adapter (#31)
* home-assistant-31 version up (#31)
* home-assistant-31 formatting (#31)
* formatting
* service description
* service description
* single attribute for volume
* fixed mute on -> mute off
* moved config constant from core into component
* check cec message length when asking physical address (#38) (#38)
* cec turn on/turn off commands instead of power
* cec turn on/turn off commands instead of power
Andrey
Erik Eriksson
Daniel Høyer Iversen
Philipp Schmitt
William Scanlon
Adam Mills
Walker Boyle
Pascal Vizeli
Jose Juan Montes
Thibault Cohen
Jon Caruana
Paulus Schoutsen
jumpkick
Pierre Ståhl
Johan Bloemberg
George.M
Robbie Trencheny
happyleavesaoc
Fabian Affolter
Martin Hjelmare
Tom Dickman
arraylabs
Fabian Affolter
Sören Oldag
PetePriority
Gert-Jan van de Streek
Josh Anderson
Stuart Mumford
Valentin Alexeev
Alan Fischer
John Arild Berentsen
Colin O'Dell
Per Sandström
Greg Dowling
Pascal Bach
Petr Vraník
Marcelo Moreira de Mello
Johann Kellerman
Teemu R
Christian Brædstrup
Mark Oude Veldhuis
Boris K
Stefano Scipioni
Duoxilian
Sean Dague
Teagan Glenn
Andreas Cambitsis
Jeff Wilson
Josh Wright
Trevor
Hermann Kraus
Jesse Osiecki
Alessandro Mogavero
ray0711
Alberto Arias Maestro
Adrián López
Yannic-HAW
Joeboyc2
Joseph Piron
Wolf-Bastian Pöttner
Ryan Kraus
miniconfig
Ben Van Mechelen
Hugo Dupras
Michaël Arnauts
Kyle Hendricks
David-Leon Pohl
jeremydk
Craig J. Ward
fakezeta
Lukas
Jan Losinski
nordlead2005
John Mihalic
Daniel Perna
Andrey
Janne Grunau
Gianluca Barbaro
thecynic
Oleksii Serdiuk
Stu Gott
Nick Touran
snagytx
Jan Harkes
David McNett
ecksun
Aaron Polley