* Refactor cached ZHA channel reads.
If doing a cached ZCL attribute read, do "only_from_cache" read for
battery operated devices only. Mains operated devices will do a network
read in case of a cache miss.
* Use cached attributes for ZHA electrical measurement
* Bump up ZHA zigpy dependency.
* Remove support for legacy logbook events created before 0.112
Reduce the complexity of the logbook code. This
should also have a small performance boost.
* None is the default
Most of the the template platforms would check for
extract_entities failing to extract entities and avoid
setting up a state change listner for MATCH_ALL after
extract_entities had warned that it could not extract
the entities and updates would need to be done manually.
This protection has been extended to all template platforms.
Alter the behavior of extract_entities to return the
successfully extracted entities if one or more templates
fail extraction instead of returning MATCH_ALL
* Switch async_track_state_change to the faster async_track_state_change_event part 4
Calling async_track_state_change_event directly is faster than async_track_state_change (see #37251) since async_track_state_change is a wrapper around async_track_state_change_event now
* pylint
Calling async_track_state_change_event directly is faster than async_track_state_change (see #37251) since async_track_state_change is a wrapper around async_track_state_change_event now
* Switch to config flow setup
* Add minimal test for config flow
* Add myself as codeowner and address some review concerns
* Address some further review comments
* Switch to integration level config
* Switch to per device config rather than per entity type
* All roller shutters should be added as covers
(there are non lighting types)
* Fixup tests that used invalid packets for platforms
* Avoid variable re-use
* Allow control events on sensors too
That way we get signal level sensors for these too
* Lint correction
* Don't filter sensors from config
Disable sensors from GUI if the entities are not wanted
* Correct usage of ATTR_ instead of CONF_
* Make sure the logging when a new entity is added includes the event
* Introduce Bond Hub concept
* Read Hub version information when setting up entry
* Link entities to Hub using via_device
* Add test to verify created Hub device properties
* Refactor Bond integration to remove duplication in Entity code and unit tests
* Refactor Bond integration to remove duplication in Entity code and unit tests (PR feedback)
* Support Fan domain in Bond integration
* Support Fan domain in Bond integration
* Support Fan domain in Bond integration (apply PR feedback)
* Support Fan domain in Bond integration (apply PR feedback)
* Declare Bond covers as having assumed state, setup local polling for state updates
* Declare Bond covers as having assumed state, setup local polling for state updates (apply feedback from PR review)
* Declare Bond covers as having assumed state, setup local polling for state updates (apply feedback from PR review)
* Declare Bond covers as having assumed state, setup local polling for state updates (apply feedback from PR review)
* Detect lingering threads after tests
* Make sure cast is setup before checking state
* Make sure we ask executors of old hass to shutdown
We are not waiting here, just hoping for the best
* Make sure all instances of hass and executors is stopped.
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
* Also apply hass stopping to scripts
* Adjust to changes how we set up executor
* Add new CoreState.stopped
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
* Add public weather sensors back in
* Remove stale code
* Cleanup after before adding entities
* Fix pylint complaint
* Add test for options flow
* Change mode to listbox
* Update .coveragerc
* Address comments
* Don't process empty list
* Address comment
* Fix mistake
* Make signal unique
* Make string more unique
* Fix merge conflict
* First step of an EnOcean integration refactoring, including code reorganisation and support of a setup config flow
* Moved title to root of strings file
* Fixed pre-commit checks failures
* Fixed linter errors
* Updated formatted string format in logs
* Removed leftover comment
* Multiple changes after PR change requests.
Using an import flow for yaml config, removed unnecessary logs, added proper unload in __init__ and EnOceanDongle
Replaced config state machine by several flows.
Serial port validity check done in the EnOceanDongle class asynchronously, removed unique ID from config flow
Multiple cosmetic changes
* Multiple changes after PR change requests
* Added variable to store default value, as setdefault was caught returning None when the empty dict literal was passed as an argument
* Literal used directly
* Added tests for EnOcean config flows, changed static methods to bundle methods for bundle
* Updated variable name
* Added missing mock to test, replaced repeated magic strings by constants
* Changed imports to avoid an unused import warning from pylint on DOMAIN
* Adding pylint exception for unused import
* Added proper propagation of setup and unload to platforms, removed dead code, some syntax changes
* Removed setup_entry forwarding as the entities can only be configured using yaml
* Removed forwarding of unload
* Enabled code coverage for config flow only
* Clean up coveragerc
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* make ip check hostname aware
* add executor job for sync function doing IO and remove errant comma
* revert change to update new_data explicitly for options keys since it is already done later
* empty commit to retrigger CI
* Add support for set_config_parameter service
* Adjusted elif to if
* More if/else cleanup
* More if/else cleanup
* Less nesting
* End loop properly
* Added byte type
* Convert break to return
* fix presets and mode conversion
* fix mapping issues in ozw climate
* build mapping table in advance
* Copying a dict to a list copies the keys by default
* Make devices and activities visibile as harmony attributes
* Allow restoring previous activity, add tests
* fix test
* Kill activity_notify with fire
* remove trailing ,
* Switch homekit to use async_track_state_change_event
Calling async_track_state_change_event directly
is faster than async_track_state_change and has
slightly lower latency triggering state updates
in homekit
* check for deleted entities
* Update additional tests for linked sensor removals
* Ensure removing entities does not result in an exception
* Switch to dispatcher
* Adjust tests for dispatcher
* Store device in sensor
* Move state application into binary sensor entity class
* Move more specifics into per platform classes
* Should not apply event in init of sensor
* Switch to call_later
* Make apply_event public
* No point in slugifying debug logs
* Adjust error in off delay and event
* Make sure we match with masked id
* Switch tests to use hass objects instead of direct
* Make sure sensor update state
* Add some initial binary sensor tests
* Add initial binary sensor tests
* Add tests for pt2262
* Add test for off delay
* Convert Android TV integration to async
* pylint
* Remove unused test code
* Require async versions of androidtv and adb-shell
* Cleanup
* Remove commented out code
* Use constants SHELL_RESPONSE_OFF and SHELL_RESPONSE_STANDBY
* Prebake common history queries
The python overhead of to construct
the queries exceeded the database overhead. We now
prebake the queries that get frequently polled.
This reduces the time it takes to update history_stats
sensors and can make quite a difference if there
are a lot of them.
When using the mini-graph-card card, all the entities
on the card being graphed are queried every few seconds
for new states. Previously this would tie up the database if there
are lot of these graphs in the UI.
* Update homeassistant/components/history/__init__.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/history/__init__.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* cache entity_filter in the lambda
* switch to yield
* Revert "switch to yield"
This reverts commit f8386f4940.
* get_states always returns a list
* query wasnt actually reusable so revert part of the breakout
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Support multiple MQTT availability topics
* Make availability list and availability_topic exclusive
* Make availability list and availability_topic exclusive
* Add missing abbreviation
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: Tom Scholten <tom@sue.nl>
Co-authored-by: Tom <CoMPaTech@users.noreply.github.com>
* add more unit tests for plum_lightpad
* add more unit tests for plum_lightpad
* add more unit tests for plum_lightpad
* add more unit tests for plum_lightpad
* Update tests/components/plum_lightpad/test_init.py
apply suggested way to invoke async_setup_entry
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Update tests/components/plum_lightpad/test_init.py
apply suggested way to invoke async_setup_entry
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Update tests/components/plum_lightpad/test_init.py
apply suggested way to invoke async_setup_entry
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Update tests/components/plum_lightpad/test_init.py
remove now unused import
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Update tests/components/plum_lightpad/test_init.py
import Mock from tests.async_mock as suggested
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Update tests/components/plum_lightpad/test_init.py
remove now unused import
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Update tests/components/plum_lightpad/test_init.py
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* fix unit tests that were failing after suggested changes
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Rework and re-enable rfxtrx tests
* Add missed change to _signal_event
* Fixup the dummy serial that causes max cpu
* Make sure we cleanup thread here too
* Make sure we always wait for tasks before we check state
* Some more places we need to wait before checking
* Add humidifier support to homekit
* spell
* dependencies
* lint
* add linked humidity sensor for humidifiers
* Apply suggestions from code review
Co-authored-by: J. Nick Koston <nick@koston.org>
* apply suggestions from code review
* pylint
* Fix tests
* Update homeassistant/components/homekit/type_humidifiers.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update tests/components/homekit/test_homekit.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Apply suggestions from code review
Co-authored-by: J. Nick Koston <nick@koston.org>
* apply suggestions from code review
* lint
* pylint
* push
* test for unavailable linker sensor
* black
* valid values key case
* black
* Update homeassistant/components/homekit/type_humidifiers.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* black
* coverage
* Set current humidity to 0 if linked sensor removed or unavailable
* use last known humidity instead
Co-authored-by: J. Nick Koston <nick@koston.org>
* Initial commit for Dexcom integration
* Dexcom config flow testing
* Clarify errors during setup
* Resolve minor test issues
* Update sensor availability, resolve linting issues
* Add sensor tests
* Remove title due to 0.109, add abort
* >94.97% codecov/patch
* Move .translations/ to translations/
* Add constants for servers and unit of measurements
* Bump pydexcom version
* Updated domain schema, Dexcom creation
* Support for different units of measurement
* Update tests
* Remove empty items from manifest
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Raise UpdateFailed if fetching new session fails
* Switch everything over to required
* Simplify state information
* Simplify async_on_remove
* Pydexcom package now handles fetching new session
* Only allow config flow
* Remove ternary operator
* Bump version, pydexcom handling session refresh
* Using common strings
* Import from test.async_mock
* Shorten variable names
* Resolve tests after removing yaml support
* Return false if credentials are invalid
* Available seems to handle if data is empty
* Now using option flow, remove handling import
* Add fixture for JSON returned from API
* Overhaul testing
* Revise update options
* Bump pydexcom version
* Combat listener repetition
* Undo update listener using callback
* Change sensor availability to use last_update_success
* Update sensor availability and tests
* Rename test
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Since we now base all of exposure checks on data that
will not change, we can cache the result instead
of calculating it every loop.
This change complements the work done in #32718
* refactoring to share logic and sensor startup error test
* Added handling for V1 InfluxDBServerError to start-up and runtime and test for it
* Added InfluxDBServerError test to sensor setup tests
* Raising PlatformNotReady exception from sensor for setup failure
* Proper testing of PlatformNotReady error
* add first unit test to config flow for Plum Lightpad
* add first unit test to config flow for Plum Lightpad (add changed requirements_test_all.txt)
* add first unit test to config flow for Plum Lightpad
* add first unit test to config flow for Plum Lightpad (bring coverage to 100%)
* add first unit test to config flow for Plum Lightpad
* add first unit test to config flow for Plum Lightpad (updated patch path as suggested)
* add first unit test to config flow for Plum Lightpad (add unit test for abort)
* Move logbook continuous domain filtering to sql
sensors tend to generate a significant amount of states
that are filtered out by logbook. In testing 75% of
states can be filtered away in sql to avoid the
sqlalchemy ORM overhead of creating objects that will
be discarded.
* remove un-needed nesting
* Added GLOB capability to entityfilter and every place that uses it. All existing tests are passing
* added tests for components affected by glob change
* fixed flake8 error
* mocking the correct listener
* mocking correct bus method in azure test
* tests passing in 3.7 and 3.8
* fixed formatting issue from rebase/conflict
* Checking against glob patterns in more performant way
* perf improvments and reverted unnecessarily adjusted tests
* added new benchmark test around filters
* no longer using get with default in entityfilter
* changed filter name and removed logbook from filter benchmark
* simplified benchmark tests from feedback
* fixed apache tests and returned include exclude schemas to normal
* fixed azure event hub tests to properly go through component logic
* fixed azure test and clean up for other tests
* renaming test files to match standard
* merged mqtt statestream test changes with base
* removed dependency on recorder filter schema from history
* fixed recorder tests after merge and a bunch of lint errors
Cleanup indexes as >50% of the db size was indexes,
many of them unused in any current query
Logbook search was having to filter event_types without
an index:
Created ix_events_event_type_time_fired
Dropped ix_events_event_type
States had a redundant keys on composite index:
Dropped ix_states_entity_id
Its unused since we have ix_states_entity_id_last_updated
De-duplicate storage of context in states as
its always stored in events and can be found
by joining the state on the event_id.
Dropped ix_states_context_id
Dropped ix_states_context_parent_id
Dropped ix_states_context_user_id
After schema v9:
STATES............................................ 10186 40.9%
EVENTS............................................ 5502 22.1%
IX_STATES_ENTITY_ID_LAST_UPDATED.................. 2177 8.7%
IX_EVENTS_EVENT_TYPE_TIME_FIRED................... 1910 7.7%
IX_EVENTS_CONTEXT_ID.............................. 1592 6.4%
IX_EVENTS_TIME_FIRED.............................. 1383 5.6%
IX_STATES_LAST_UPDATED............................ 1079 4.3%
IX_STATES_EVENT_ID................................ 375 1.5%
IX_EVENTS_CONTEXT_PARENT_ID....................... 347 1.4%
IX_EVENTS_CONTEXT_USER_ID......................... 346 1.4%
IX_RECORDER_RUNS_START_END........................ 1 0.004%
RECORDER_RUNS..................................... 1 0.004%
SCHEMA_CHANGES.................................... 1 0.004%
SQLITE_MASTER..................................... 1 0.004%
* adj
* time_fired_isoformat
* remove unused code
* tests for processing timestamps
* restore missing import lost in merge conflict
* test for None case
* Squeezebox add config flow and player discovery
* Fixes to config flow
* Unavailable player detection and recovery
* Improved error message for auth failure
* Testing for squeezebox config flow
* Import configuration.yaml
* Support for discovery integration
* Internal server discovery
* Fix bug restoring previously detected squeezebox player
* Tests for user and edit steps in config flow
* Tests for import config flow
* Additional config flow tests and fixes
* Linter fixes
* Check that players are found before iterating them
* Remove noisy logger message
* Update requirements_all after rebase
* Use asyncio.Event in discovery task
* Use common keys in strings.json
* Bump pysqueezebox to v0.2.2 for fixed server discovery using python3.7
* Bump pysqueezebox version to v0.2.3
* Don't trap AbortFlow exception
Co-authored-by: J. Nick Koston <nick@koston.org>
* Refactor validate_input
* Update squeezebox tests
* Build data flow schema using function
* Fix linter error
* Updated en.json
* Update homeassistant/components/squeezebox/media_player.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/squeezebox/media_player.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/squeezebox/media_player.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/squeezebox/media_player.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update .coveragerc for squeezebox config flow test
* Mock TIMEOUT for faster testing
* More schema de-duplication and testing improvements
* Apply suggestions from code review
Co-authored-by: J. Nick Koston <nick@koston.org>
* Testing and config flow improvements
* Remove unused exceptions
* Remove deprecated logger message
* Update homeassistant/components/squeezebox/media_player.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Implement suggestions from code review
* Add async_unload_entry
* Use MockConfigEntry in squeezebox tests
* Remove unnecessary config schema
* Stop server discovery task when last config entry unloaded
* Improvements to async_unload_entry
* Fix bug in _discovery arguments
* Do not await server discovery in async_setup_entry
* Do not await start server discovery in async_setup
* Do not start server discovery from async_setup_entry until homeassistant running
* Re-detect players when server removed and re-added without restart
* Use entry.entry_id instead of unique_id
* Update unittests to avoid patching homeassistant code
Co-authored-by: J. Nick Koston <nick@koston.org>
* Refactor / update Awair integration
This commit does a few things, all in service of making the Awair
integration more modern and reliable. Specifically we do the following:
- Update to python_awair 0.1.1
- Begin using config entries / flow for setting up the integration.
- YAML support is completely removed.
- The integration now allows adding multiple Awair accounts, should a
user wish to do so (I found it _very_ useful in development).
- Group various Awair sensors into devices, using the device registry.
- Renames various sensors and treats the "dust" sensor as a particulate sensor.
- Device update rate-limits are no longer dynamically calculated; the
Awair API now separates rate-limits on a per-device basis.
- Supports sound pressure and illuminance sensors found on some Awair devices.
- We report the "awair index" for certain sensors as part of device_state_attributes.
The "index" is a subjective measure of whether or not a sensor reading
is "good" or "bad" (and to what extent). It's a component of the Awair
score, and it is useful on its own as an input for those who wish to
do things like "display this color if the value is 'bad'".
This is a breaking change, and requires updates to documentation and a
warning in the README. The breaking changes in detail, are:
- Support for all YAML configuration is removed, and users will need to
re-add the integration via the UI.
- We no longer support overriding device discovery via manual
configuration of device UUIDs. This was previously supported because
the Awair API had severe limits on the device list endpoints; however
those have since been removed.
- Gen 1 devices no longer show a "dust" sensor; rather we create a PM2.5
sensor and a PM10 sensor and just keep the values in sync. This better
reflects the sensor capabilities: it can detect particles in a range
from 2.5 -> 10, but cannot differentiate between sizes.
- Sensors are renamed as follows:
- "sensor.devicename_co2" -> "sensor.devicename_carbon_dioxide"
- "sensor.devicename_voc" -> "sensor.devicename_volatile_organic_compounds"
- "sensor.devicename_score" -> "sensor.devicename_air_quality_index"
- I've chosen to call the "Awair Score" an "air quality index" sensor,
because fundamentally the "Awair Score" and other air quality indices
(such as CAQI) do the same thing: they calculate a value based on a
variety of other inputs.
Under the hood, the integration has seen some improvements:
- We use the DataUpdateCoordinator class to handle updates, rather than
rolling our own update class.
- The code no longer tracks availability based on a timestamp returned
from the Awair service; we assert that if we have received a response
and the response has data for our device, then we are available (and
otherwise, not available). We don't need to test the actual Awair API
so heavily.
- Test coverage has been expanded to handle a variety of products that
Awair produces, not just the one I happen to own.
- Test coverage no longer concerns itself with testing behavior that is
now handled by the DataUpdateCoordinator; nor is it concerned with
ensuring that the overall component sets up and registers properly.
These are assumed to be well-tested functionaity of the core and not
things we need to re-test ourselves.
Finally - between library updates and integration updates, this
integration is well-positioned to support future updates. I have a
proof-of-concept patch for device automations, and the underlying
library now supports subclassing authentication (which clears the way
for us to use OAuth authentication for Awair).
* Wrap test fixture in mock_coro
Truthfully I'm not sure why this was passing on my local dev
environment, but I was developing with python 3.8 before. After
installing python 3.7, I was able to reproduce the CI failures and fix
them.
* Fix broken tests after #34901 and/or #34989
* Do not rename sensors so broadly
We're going to keep the sensors named as they were before, pending the
outcome of any decisions around the air_quality component and what names
should be standardized for air-quality-like devices.
If standardized names are selected (which does seem likely), then we
will update this integration to match them - at which point, it would be
a breaking change.
But for now, we'll keep names mostly identical to what users had before.
Notable in this commit is that we generate the entity_id ourselves,
rather than just allowing it to be auto-generated from the name
attribute. This allows us to provide more human friendly names, while
keeping the old format for entity ids. For example, given an Awair
device called "Living Room", we'll generate an entity id of
"sensor.living_room_voc" but show set the name of the device to "Living
Room Volatile organic compounds".
* Support import from config.yaml
We'll create a config entry from config.yaml the first time we're
loaded, and then defer to it from then on.
We ignore all keys other than the access_token, since we no longer need
to deal with per-account rate-limits (rather, everything is per-device
now).
* Add myself to CODEOWNERS
Since I wrote the initial integration, and now this re-write, it feels
appropriate for me to take care of the integration along with `danielsjf`.
* Remove name mangling
* Update homeassistant/components/awair/manifest.json
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/awair/config_flow.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/awair/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/awair/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Address some review feedback
* Set up reauth flow in a job, rather than awaiting
* Remove unnecessary title string
* Remove unnecessary config schema checking
As pointed out in review, because this comes in via import from
`configuration.yaml`, we can rely on the `PLATFORM_SCHEMA` validation instead.
* Fix tests
* Set unique_id appropriately for legacy devices
For users who have had this integration already installed (and who have
updated their home assistant installation sometime in recent history),
we want to ensure that unique_id's are set to the same thing as before,
to facilitate the upgrade process.
To do that, we add an additional property to the `SENSOR_TYPES` dict
(`ATTR_UNIQUE_ID`) which allows us to map modern sensor names from
python_awair to what older versions called them - ie: `humidity` ->
`HUMID`. We then use that value when constructing the unique ID. This
should allow users to upgrade and not lose configuration even if entity
IDs would otherwise change (because we have changed the name format that
generates entity IDs).
One note is that for the gen1 `DUST` sensor, we have to treat it
differently. This integration used to call that a "PM2.5" sensor, but
the unique_id generated would be something like `awair_12345_DUST`. So
we special-case that sensor, and do the same thing. We do not need to
special-case the PM10 sensor for gen1 devices, because we didn't create
a PM10 sensor in the past (we do now, because the "DUST" sensor is
really a hybrid PM2.5/PM10 sensor).
* Patch async_setup_entry for two tests
* Update awair config_flow to require / use an email address for unique_id
Also, only start one re-auth flow.
* Add a few more tests, try to get coverage up.
* Add another test
* Move attribution to device_state_attributes
* Don't require email
* Switch from Union[dict, None] to Optional[dict]
* Use a mock where requested
* Fix missing constant rename
* Use async_create_task
* Bump test coverage a bit for config_flow
* s/CONF_UNIQUE_ID/UNIQUE_ID/g
* Add warning about deprecated platform config
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Prefilter more logbook events in sql
Prefilter sensor events in _keep_event before humanify
Cache static attribute lookup
Reduces logbook execution time by ~35%
* fix mocking in benchmark
* Update tests for logbook users
* TTS seems unsupported on heos media player #32862
TTS seems unsupported on heos media player #32862
The type media_type music which is required by TTS was not covered.
* Update homeassistant/components/heos/media_player.py
Co-authored-by: Andrew Sayre <6730289+andrewsayre@users.noreply.github.com>
* Update to test_media_player.py
Test for TTS support to Heos #35386
* Update test
Add TTS support to Heos #35386
* Update to test_play_media_music
assert set to "Unable to play music: Failure (1)" seems to cause an issue.
* test_play_media_music
syntax
Co-authored-by: Andrew Sayre <6730289+andrewsayre@users.noreply.github.com>
* Allow activity change on start of switch
Allow activity to be updated when a switch to a new activity is initiated instead of when it is completed.
* Updates based on feedback
Some items are not required to be done as YAML is not used anymore.
Cleaned-up some code.
* Fix for change on how to set callbacks
How callbacks are set now one has to set the new_activity and new_activity_starting as well, even just with None.
* Added callback update
Added so that when it is changed in the UI the callbacks will be changed as well.
* Added test cases for notify setting
Added test cases for config flow to test new setting for activity notifications.
* Add discovery to NUT integration
* implement async_step_zeroconf
* Update test to make sure unique id not set
* Remove host/port import when coming from discovery, add title placeholders
* fix mis-paste
Co-authored-by: J. Nick Koston <nick@koston.org>
* Add expiration timestamp to cert_expiry sensors
* Clear timestamp if cert becomes invalid
* Use timezone-aware timestamps
* Use DataUpdateCoordinator, split timestamp to separate sensor
* Use UTC, simpler add/remove handling
* Review fixes
* Fix incomplete mock that fails in 3.8
* Use static timestamps, improve helper method name
* Add old_state_id to states, remove old/new state data from events since it can now be found by a join
* remove state lookup on restart
* Ensure old_state is set for exisitng states
Marcel van der Veldt
J. Nick Koston
Chris
Perry Naseck
Alexei Chetroi
Eugene Prystupa
mdegat01
Pascal Vizeli
SukramJ
Bram Kragten
Joakim Plate
Paulus Schoutsen
Eric Severance
Phil Bruckner
cgtobi
jduquennoy
Shulyaka
Ville Skyttä
Erik Montnemery
Chris Talkington
Sava Tshontikidis
Raman Gupta
jjlawren
akloeckner
starkillerOG
Franck Nijhof
Baptiste Candellier
Jeff Irion
Rick Sherman
Bouwe Westerdijk
ktnrg45
Robert Van Gorkom
Gage Benne
Haemish Kyd
Michał Mrozek
MatthewFlamm
Gleb Sinyavskiy
Aaron Bach
bsmappee
Indu Prakash
uvjustin
Hedgehog57
Thomas Hollstegge
Martin Hjelmare
Xiaonan Shen
Jonas Thuresson
zvldz
rajlaud
Andrew Hayworth
Fredrik Erlandsson
avocadio
Kit Klein
ehendrix23
Robert Svensson