* A platform is not a component
* Fix dynalite
* SUPPORTED_PLATFORMS --> PLATFORMS
* In tests
* In tests 2
* Fix SmartThings
* Fix ZHA test
* Fix Z-Wave
* Revert Z-Wave
* Use PLATFORMS const in ambient_station
* Fix ihc comment
* Unused pylint suppression cleanups
* Remove outdated pylint bug references
* Add flake8-noqa config and note to run it every now and then
* Add codes to noqa's
* Unused noqa cleanups
* Make async_get_device connections Optional, default None
* Remove unnecessary async_get_device connections arg usages
Some of these were using an incorrect collection type, which didn't
cause issues mostly just due to luck.
* Refactor ZHA sensors to use cached values after restart
* Get attr from cluster, not channel
* Run cached state through formatter method
* Use cached values for div/multiplier for SmartEnergy channel
* Restore batter voltage from cache
* Refactor sensor to use cached values only
* Update tests
* Add battery sensor test
* Update zha.permit schema to support install code
* Move install code to core helpers
* QR code converter for enbrighten
* Fix schemas
* Update test for permit service
* Refactor zha.permit to accept install codes
* Test zha.permit from QR code
* Fix regex for Embrighten QR code
* Add regex for Aqara QR codes
* Add Consciot regex for QR code
* Reuse test params for WS tests
* ZHA WS permit command with install code
* Tests for zha.permit WS service
* Refactor zha.permit and zha.remove service to use ATTR_IEEE for the address
* Make pylint happy
* Deprecate only ieee_address param for now
* Refactor cached ZHA channel reads.
If doing a cached ZCL attribute read, do "only_from_cache" read for
battery operated devices only. Mains operated devices will do a network
read in case of a cache miss.
* Use cached attributes for ZHA electrical measurement
* Bump up ZHA zigpy dependency.
* Centralite specific control seq of operation
* Remove Fan safeguards
* Split hvac_action property.
* Refactor hvac_action property.
Current hvac_action logic is Zen Within thermostat specific and differs
a bit from ZCL specs. Implement it as a separate class.
* Refactor hvac_action property for default thermostat
Follow more closely ZCL specs in parsing hvac state of the thermostat.
* Initial ZHA climate implementation.
* Add retryable_request decorator.
sort helpers imports.
* Check manufacturer for Climate implementation.
* Default zha.climate.operation_list to [Off]
* Migrate to climate 1.0
* Sort imports, properties and methods.
* Handle 'PRESET_NONE' presets.
* Use pi_heating/cooling_demand for HVAC action prop.
* Implement `running_state` HVAC channel property.
For ZHA thermostats which don't support `pi_heating_demand` or
`pi_cooling_demand' attributes.
* wip fan support
* Refactor retryable request logging.
* Rebase cleanup.
* Update climate discovery.
* Fix ZHA climate restoration.
* Bulk configure attribute reports.
* Use configure_reporting_multiple command for Light
More detailed response parsing of configure_reporting_multiple.
* Use ordered list for HVAC cluster attribute reports.
* Don't mutilate HVAC mode list.
* Add fan_mode property to fan channel.
* Fix type hinting.
* Expose fan mode only.
* Implement fan mode setting.
Drop support for HVAC_FAN_ONLY mode.
* Use ClimateEntity as base class.
* Cleanup debug code.
* Update time display for Sinope.
* Don't do many retries.
* Don't use multi attr reporting configuration.
* Make tests pass.
* Drop support for setpoint change source/amount.
* Cleanups.
* Drop aux heat
* Update tests.
* Drop Sinope temperature display code.
* Update tests.
* Refactor temperature setting.
* Update tests.
* Update Fan tests.
* Lint
* Black.
* Use correct logging levels
* Refactor ZHA config flow
Present more descriptive list of radio types when user has to pick one.
* Update docstring.
* Add some common models to EZSP radio.
* Add more model names
More model names, less english since radio types won't be translated.
* Start gateway using new zigpy init.
Update config entry data import.
Use new zigpy startup.
Fix config entry import without zha config section.
Auto form Zigbee network.
* Migrate config entry.
* New ZHA config entry flow.
Use lightweight probe() method for ZHA config entry validation when
available. Failback to old behavior of setting up Zigpy app if radio lib
does not provide probing.
* Clean ZHA_GW_RADIO
* Don't import ZHA device settings.
* Update config flow tests.
* Filter out empty manufacturer.
* Replace port path with an by-id device name.
* Rebase cleanup
* Use correct mock.
* Make lint happy again
* Update tests/components/zha/test_config_flow.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/zha/test_config_flow.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/zha/test_config_flow.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Use executor pool for IO
* Address comments.
Use AsyncMock from tests.
* Use core interface to test config flow.
* Use core interface to test config_flow.
* Address comments. Use core interface.
* Update ZHA dependencies.
* Schema guard
* Use async_update_entry for migration.
* Don't allow schema extra keys.
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* start implementation
* handle members correctly
* fix group member info
* align groupable devices with group members
* handle group endpoint adding and removing
* update add group
* update group and group member
* update create group
* remove domain check
* update test
* remove temporary 2nd groupable device api
* update test
* rename validator - review comment
* fix test that was never running
* additional testing
* fix coordinator descriptors
* remove check that was done twice
* update test
* Use AsyncMock()
Co-authored-by: Alexei Chetroi <lexoid@gmail.com>
tkdrob
Quentame
Ville Skyttä
J. Nick Koston
Franck Nijhof
Shulyaka
Alexei Chetroi
David F. Mulcahey
Paulus Schoutsen
Philip Allgaier
Abílio Costa
Samantha
springstan