* Add missing Heatpump parameters and units
* Fix merge issue
* Fix snapshot
* Removing bundle_id as extra state attribute till functionality is needed and updating api translation with missing phrase
* Fix translations for listparameters
* Fix translations for listparameters
* Capitalize "PIN to Drive" as feature name in `teslemetry`
Fixes the spelling of "PIN" for consistency and turns "PIN to Drive" into the feature name that Tesla uses (in English).
* Update test_binary_sensor.ambr
* Add password length restriction
* Bump reolink-aio to 0.12.3
* Add repair issue for too long password
* finish password too long repair issue
* add test
* Refactor zwave_js config entry setup
* Fix blocking update test
* Address timeout comment
* Remove platform tasks
* Replace deprecated async_add_job
* Use ConfigEntry.async_on_state_change
* Use modern config entry methods
* Clarify exception message
* Test listen error after config entry setup
* Test listen failure during setup after forward entry
* Test not reloading when hass is stopping
* Test client disconnect is called on entry unload
* Fix and test client not connected during driver setup
* Fix and test driver ready timeout
* Stringify listen task exception when logging
* Use identity compare
* Guard for closed connection
* Consolidate listen task checking and tests
* Fix initial fetch of appliance data to handle API rate limit errors
* Apply comments
* Delete stale function
* Handle api rate limit error at options fetching
* Update appliances after stream non-breaking error
* Always initialize coordinator data
* Improve device update
* Update test description
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
---------
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* update map on status change
* Update tests/components/roborock/test_image.py
Co-authored-by: Allen Porter <allen.porter@gmail.com>
* update code to handle state logic within async_update_data
* Update homeassistant/components/roborock/coordinator.py
Co-authored-by: Allen Porter <allen.porter@gmail.com>
* move previous_state and allow update on None
---------
Co-authored-by: Allen Porter <allen.porter@gmail.com>
* Move MapData to Coordinator
* seeing if mypy likes this
* delete dead code
* Some MR comments
* remove MapData and always update on startup if we don't have a stored map.
* don't do on demand updates
* remove unneeded logic and pull out map save
* Apply suggestions from code review
Co-authored-by: Allen Porter <allen.porter@gmail.com>
* see if mypy is happy
---------
Co-authored-by: Allen Porter <allen.porter@gmail.com>
* Update MCP server to not register the stateless API, but use it implicitly as an Assist API replacement
* Ensure backwards compatibility with old registration
* Add Crossline smart AI binary sensor
* Add intrusion, lingering, forgotten item, item taken detection
* Use unique_index instead of location for unique_id
* Add test
* Apply suggestions from code review
Co-authored-by: Abílio Costa <abmantis@users.noreply.github.com>
* Name changes
* Update homeassistant/components/reolink/binary_sensor.py
Co-authored-by: Abílio Costa <abmantis@users.noreply.github.com>
* Use smart_type instead of key
* Use occupancy translation instead of gas (point to the same thing).
* Revert "Use occupancy translation instead of gas (point to the same thing)."
This reverts commit 9caf796585.
* fix styling
---------
Co-authored-by: Abílio Costa <abmantis@users.noreply.github.com>
* Update config_entry_oauth2_flow.py
* Specify type on request_data
* Added LocalOAuth2ImplementationWithPkce
* LocalOAuth2ImplementationWithPkce works more like specs
* fix: Adding tests for pkce flow and feedback applied
* fix last test for pkce
* Clean test_abort_if_oauth_with_pkce_rejected
* Improve assertion of code verifier and code challenge
* Break long docstrings
* Shorten docstring
---------
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* style: rename humidifier night const
* fix: separate night light for fan and humidifier
Check for the presence of set_night_light_brightness and
set_night_light to indentify humidifier and fan devices.
set_night_light is defined on VeSyncAirBypass and
set_night_light_brightness is defined on VeSyncHumid200300S.
update test
* Add price cap support
* Change service input to box mode
* Add icon for set_price_cap service
* Improve test coverage
* Change ohme service description wording
* Add remote_calendar with storage
* Use coordinator and remove storage
* cleanup
* cleanup
* remove init from config_flow
* add some tests
* some fixes
* test-before-setup
* fix error handling
* remove unneeded code
* fix updates
* load calendar in the event loop
* allow redirects
* test_update_failed
* tests
* address review
* use error from local_calendar
* adress more comments
* remove unique_id
* add unique entity_id
* add excemption
* abort_entries_match
* unique_id
* add ,
* cleanup
* deduplicate call
* don't raise for status end de-nest
* multiline
* test
* tests
* use raise_for_status again
* use respx
* just use config_entry argument that already is defined
* Also assert on the config entry result title and data
* improve config_flow
* update quality scale
* address review
---------
Co-authored-by: Allen Porter <allen@thebends.org>
* Add sensor values for Power and Energy
* test
* test
* Sensor test
* Fix test
* fix test
* Fixing test coverage
* refactored
* WolfllinkSensorEntityDescriptions and updated tests
* fix test
* Add name_fn and test_sensor adoptions
* fix test coverage
* Revert "fix test coverage"
This reverts commit 2405751f5a.
* resolve requested changes and fix test
* Fix Snapshot
* clean up
* Fixed unknown state in snapshot test
* Aded Generate Content Service for OpenAI to match Google AI
* Fixed code for commit checks
* Addressed code review comments
* Address review comments
* Addressed @balloob review comments.
* Address futher review comments from @balloob
* Seperate entities to a new dock device
* update entity names
* Update homeassistant/components/roborock/coordinator.py
---------
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
* Initial implementation of hardware update model
* Fixes
* WIP: change the `homeassistant_sky_connect` integration type
* More fixes
* WIP
* Display firmware info in the device page
* Make progress more responsive
* WIP: Yellow
* Abstract the bootloader reset type
* Clean up comments
* Make the Yellow integration non-hardware
* Use the correct radio device for Yellow
* Avoid hardcoding strings
* Use `FIRMWARE_VERSION` within config flows
* Fix up unit tests
* Revert integration type changes
* Rewrite hardware ownership context manager name, for clarity
* Move manifest parsing logic into a new package
Pass the correct type to the firmware API library
* Create and delete entities instead of mutating the entity description
* Move entity replacement into a `async_setup_entry` callback
* Change update entity category from "diagnostic" to "config"
* Have the client library handle firmware fetching
* Switch from dispatcher to `async_on_state_change`
* Remove unnecessary type annotation on base update entity
* Simplify state recomputation
* Remove device registry code, since the devices will not be visible
* Further simplify state computation
* Give the device-less update entity a more descriptive name
* Limit state changes to integer increments when sending firmware update progress
* Re-raise `HomeAssistantError` if there is a problem during flashing
* Remove unnecessary state write during entity creation
* Rename `_maybe_recompute_state` to `_update_attributes`
* Bump the flasher to 0.0.30
* Add some tests
* Ensure the update entity has a sensible name
* Initial ZBT-1 unit tests
* Replace `_update_config_entry_after_install` with a more explicit `_firmware_info_callback` override
* Write the firmware version to the config entry as well
* Test the hardware update platform independently
* Add unit tests to the Yellow and ZBT-1 integrations
* Load firmware info from the config entry when creating the update entity
* Test entity state restoration
* Test the reloading of integrations marked as "owning"
* Test installation failure cases
* Test firmware type change callback failure case
* Address review comments
* Add initial MQTT subentry support for notify entities
* Fix componts assigment is reset on device config. Translation tweaks
* Rephrase
* Go to summary menu when components are set up already - add test
* Fix suggested device info on config flow
* Invert
* Simplify subentry config flow and omit menu
* Use constants instead of literals
* More constants
* Teak some translations
* Only show save when the the entry is dirty
* Do not trigger an entry reload twice
* Remove encoding, entity_category
* Remove icon from mqtt subentry flow
* Separate entity settings and MQTT specific settings
* Remove object_id and refactor
* Migrate translations
* Make subconfig flow test extensible
* Make sub reconfig flow tests extensible
* Rename entity_platform_config step to mqtt_platform_config
* Make component unique ID independent from the name
* Move code for update of component data to helper
* Follow up on code review
* Skip dirty stuff
* Fix rebase issues #1
* Do not allow reconfig for entity platform/name, default QoS and refactor tests
* Add entity platform and entity name label to basic entity config dialog
* Rename to exclude_from_reconfig and make reconfig option not optional
* Use correct unit symbol "min" for minutes in `webmin` integration
Replace the unit symbol "m" which stands for meter with the correct SI uni symbol "min".
* Update test_sensor.ambr
* Update test_sensor.ambr (2)
* Added the hvac action attribute for modbus climate entities.
* Fixed issue in hvac action unit test, was incorrectly referencing the hvac mode attribute.
* Fixed the modbus climate test for hvac action, it now correctly checks that hvac actions in the config match HVACActions.
* Made changes recommended by @crug80 to remove dead code and to add ability to use input or holding register for hvac action.
* Moved action test case in test_climate.py
* Updated comment for `test_service_climate_action_update`
* Fixed ruff formatting error.
* Addressed request to update labels from `state_*` to `action_*`
* Fix bug with all maps being set to the same when empty
* fix parens
* fix other parens
* rework some of the logic
* few small updates
* Remove test that is no longer relevant
* remove updated time bump
* Update hdate version
* Update code to reflect changes from hdate==1.0.0
* Fix some tests
* Fix parasha tests
* Fix holiday tests
* Cleanup holidays changes
* Zmanim objects should now access the local attribute
* Fix binary sensors
* Update test values on upcoming shabbat times
* Update hdate to 1.0.1
* Adapt to changes from 1.0.0 -> 1.0.1
* Change shabbat candle lighthing test scenario to 40 minutes as expected in Jerusalem
* Update to version 1.0.2
* Update keys based on updated nomenclature in library
* Update HolidayDatabase .get_all_names in test
* Make holiday type an ordered set
* Fix freeze_time
* Fix imports
* Fix tests and minor change
* Update hdate version 1.0.3, add migration method
* Fix migration code
* Add test for migration
* The change is not backwards compatible if config is not restored
* Don't allow creating backups if hass is not running
* Revert "Don't allow creating backups if hass is not running"
This reverts commit 1bf545eb25.
* Set backup manager to idle only after Home Assistant has started
* Update according to discussion, add tests
* Add more test
* - Added lock platform
- Added creation of IgloohomeLockEntity when bridge devices are included.
* - Migrated retrieval of linked_bridge utility to utils module.
- Added ability for lock to update it's own linked bridge automatically
* - Added mock bridge device to test fixture
* - Added snapshot test for lock module
* - Added bridge with no linked devices
- Added test for util.get_linked_bridge
* - Added handling of errors from API call
* - Bump igloohome-api to v0.1.0
* - Minor change
* - Removed async update for locks. Focus on MVP
* - Removed need for update on entity creation
* - Updated snapshot test
* - Updated snapshot
* - Updated to use walrus during lock entity creation
- Updated callback class for async_setup_entry based on lint suggestion
* - Set _attr_name as None
- Updated snapshot test
* Update homeassistant/components/igloohome/lock.py
* Update homeassistant/components/igloohome/lock.py
---------
Co-authored-by: Josef Zweck <josef@zweck.dev>
* extend tests to catch null schedules
* add fixture with null schedule
* remove null schedules for now
* fic the typing for _schedule attr (is list, not dict)
* add valid schedule to fixture
* update ssetpoints only if there is a schedule
* snapshot to match last change
* refactor: dont update switchpoints if no schedule
* add in warnings for null schedules
* add fixture for DHW without schedule
EnjoyingM
Abílio Costa
Norbert Rittel
peteS-UK
Martin Hjelmare
Luke Lashley
Petro31
Artur Pragacz
starkillerOG
Joost Lekkerkerker
Franck Nijhof
Petar Petrov
J. Diego Rodríguez Royo
Ivan Lopez Hernandez
J. Nick Koston
Erik Montnemery
jukrebs
Josef Zweck
Manu
Maikel Punie
Simone Chemelli
Dan Raper
Jan Schneider
Allen Porter
Andrew Sayre
Thomas55555
Shay Levy
Stephan van Rooij
Indu Prakash
Johnny Willemsen
Markus Adrario
Denis Shulyaka
Pete Sage
Jan-Philipp Benecke
Jeff Terrace
Tim Laing
puddly
Michel van de Wetering
Paul Bottein
Brett Adams
Jan Bouwhuis
Maciej Bieniek
Louis Christ
Marc Mueller
Paulus Schoutsen
Pieter Viljoen
dontinelli
Austin Mroczek
epenet
Lincoln Kirchoff
Tsvi Mostovicz
Andrew Jackson
Antoine Reversat
Felipe Santos
David Bonnes
Keith
msm595
Matthias Alphart