* Add default device class display precision for Sensor
* Renaming, docstrings, cleanup
* Simplify units list
* Fix tests
* Fix missing precision when suggested is specified
* Update snapshots
* Fix when unit of measurement is not valid
* Fix tests
* Fix deprecated unit usage
* Fix goalzero tests
The sensor native_value method was accessing the data dict and trowing,
since the mock did not have any data for the sensors.
Since now the precision is always specified (it was missing for those
sensors), the throw was hitting async_update_entity_options in _update_suggested_precision.
Previously, async_update_entity_options was not called since it had no
precision.
* Fix metoffice
* Fix smartthings
* Add default sensor data for Tesla Wall Connector tests
* Update snapshots
* Revert spaces
* Update smartthings snapshots
* Add missing sensor mock for tesla wall connector
* Address review comments
* Add doc comment
* Add cap to doc comment
* Update comment
* Update snapshots
* Update comment
* Add WS command to help reset custom entity_id
* Calculate suggested object id from entity properties
* Fix logic and add additional tests
* Adjust test
* Update folder_watcher test
* Handle current entity id matches the automatic entity id
* Don't store calculated_object_id
* Update snapshots
* Update snapshots
* Update test
* Tweak logic for reusing current entity_id
* Improve test
* Don't assign same entity_id to several entities
* Prioritize custom entity name
* Update snapshots
* Update snapshots
* Reapply "Add support for subentries to config entries" (#133470) (#136061)
* Reapply "Add support for subentries to config entries" (#133470)
This reverts commit ecb3bf79f3.
* Update test snapshot
* Add config subentry support to device registry (#128157)
* Add config subentry support to device registry
* Apply suggestions from code review
* Update syrupy serializer
* Update snapshots
* Address review comments
* Allow a device to be connected to no or a single subentry of a config entry
* Update snapshots
* Revert "Allow a device to be connected to no or a single subentry of a config entry"
This reverts commit ec6f613151cb4a806b7961033c004b71b76510c2.
* Update test snapshots
* Bump release version in comments
* Rename config_subentries to config_entries_subentries
* Add config subentry support to entity registry (#128155)
* Add config subentry support to entity registry
* Update syrupy serializer
* Update snapshots
* Update snapshots
* Accept suggested changes
* Clean registries when removing subentry (#136671)
* Clean up registries when removing subentry
* Update tests
* Clean up subentries from deleted devices when removing config entry (#136669)
* Clean up subentries from deleted devices when removing config entry
* Move
* Add config subentry support to entity platform (#128161)
* Add config subentry support to entity platform
* Rename subentry_id to config_subentry_id
* Store subentry type in subentry (#136687)
* Add reconfigure support to config subentries (#133353)
* Add reconfigure support to config subentries
* Update test
* Minor adjustment
* Rename supported_subentry_flows to supported_subentry_types
* Address review comments
* Add subentry support to kitchen sink (#136755)
* Add subentry support to kitchen sink
* Add subentry reconfigure support to kitchen_sink
* Update kitchen_sink tests with subentry type stored in config entry
* Update kitchen_sink
* Update kitchen_sink
* Adjust kitchen sink tests
* Fix hassfest
* Apply suggestions from code review
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Improve docstrings and strings.json
---------
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update snapshots
* Update snapshots
* Update snapshots
* Update snapshots
* Update snapshots
* Update snapshots
* Update snapshots
---------
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Sid <27780930+autinerd@users.noreply.github.com>
Co-authored-by: Marc Mueller <30130371+cdce8p@users.noreply.github.com>
Co-authored-by: J. Nick Koston <nick@koston.org>
* Convert persistent notification tests to async
* Create/dismiss persistent notifications in exposed functions, not service calls
* Fix notify persistent_notification
* Remove setting up persistent_notification
* Drop more setups
* Empty methods
* Undeprecate sync methods because too big task
* Fix setup clearing notifications
* Fix a bunch of tests
* Fix more tests
* Uno mas
* Test persistent notification events
* Clean up stale comment
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Scaffold
* Added the en translation
* Modified the name
* Basic functionality for config flow.
* Pulled in enough to validate config flow works.
* Update manifest.json
* initial data polling (water and air temp sensors)
* Adding sensors, debugging update function
* polling updates working
* support for new data format from library
* Updated entity_id, friendly name, conversion for ppm, attributes for hayward display units, MSPSystemID and component systemID
* Fixed errors for PR
* clean up
* Add login exc, check if configured, test login.
* Remove debug print.
* Black formatting, ran isort, update requirements.
* Updated w isort. fix flake8 failures.
* Fix flake8 errors
* Fixed self.attrs to remove invalid self._ values - small change
* Missed on small change - fixing attributes
* Updated naming, updated unit of measure, updated icon, bumped omnilog…
* Updated to fix flake8 issues in __init__.py and config_flow.py
* Updated test_config_flow.py to pass, updated config_flow.py to correct errors in test
* Remove comments in preparation for PR
* update .covezragerc
* Formatting fix
* Rewrote sensors to dynamically add all BOWs, pumps, clorinators. Still to do - add CSAD sensors.
* Rewrote sensors to dynamically add all BOWs, pumps, clorinators. Still to do - add CSAD sensors.
* Added CSAD sensors for pools that have them.
* Added CSAD sensors for pools that have them.
* Fixed CSAD to not create if blank or don't exist, removed broad except usage to pass linting.
* Updated entity naming convention. Fixed linting issues.
* Added device association to the back yard / omnilogic system
* Removed .0 from ppm values when returning imperial values for salt sensor
* Updated to return state = None for water temp when pump is off, handled Chlorinator operatingMode = 2, and added PlatformNotReady check
* Corrected exception from Omnilogic library
* Bumped omnilogic to 0.3.7. Added alarm sensor/data to sensors. Handle pump off condition for ph and orp sensors.
* Bumped omnilogic to 0.3.7. Added alarm sensor/data to sensors. Handle pump off condition for ph and orp sensors.
* Bumped omnilogic to 0.3.7. Added alarm sensor/data to sensors. Handle pump off condition for ph and orp sensors.
* Removed nested_lookup dependency, bumped omnilogic.py to 0.3.8.
* Fixed lint error
* Added logging for sensor creation.
* Fixed linting errors with logging.
* Fixed explicit chaining of raised error. Fixed issue with alarm sensor.
* Fixed manifest.json based on feedback.
* Fixed self.attrs, should_poll, CoordinatorEntity, SCAN_INTERVAL from comments in PR.
* Addressed unique_id, moved data update coordinator, addressed minor other issues from testing
* Created main OmniLogic entity for common items, reworked DataUpdateCoordinator to it's own class.
* Addressed config_schema not used in __init__.py
* Fixed linting issues.
* Addressed several comments, still todo - separate sensor classes.
* Split the Omnilogic Sensors into separate logical classes for simpler logic.
* Fixed snake case lint error for AddAlarms (to add_alarms)
* Addressed config_flow issues from comments.
* Changed addressed ConfigNotReady issue from comments.
* Updated strings.json and generated corrected en.json with translations.
* Updated en.json to standard generated file.
* Added config_flow tests and updated issue with config_flow on cannot_connect
* Added test case for incomplete information entered.
* Compressed logic in the sensor classes to reduce duplication.
* Updated strings.json for polling_interval, added generic exception handling on config flow.
* Removed omnilogic from the .coveragerc omit file.
* Updated test_config_flow to follow recommended pattern.
* Excluded sensor.py from test coverage tests.
* Corected minor issues in test_config_flow from comments
* Fixed linting issues on last commits
* Fixed linting issues.
* Corrected issue when temp state is not available from Omnilogic
* Added omnililogic_common.py from .coveragerc to bypass test coverage check.
* Return false on Login Exception, handle OmniLogicException in config_flow and in tests.
* Handle all exceptions and in config_flow and tests, clarified test naming.
* Broke out test cases per comments.
* Regenerated en.json file.
* Addressed changes from comments in PR.
* Added session and bumped API to 0.4.0, addressed other comments from PR.
* Addressed entitydata (missed earlier).
* Fixed pylint issue
* Added test case for options flow in test_config_flow.py
* Removed super() and used self when calling methods in current class.
* Addressed comments in PR.
* Addressed comments in PR.
* Updated translations file.
* Rewrote data coordinator to output dict for easy searching.
* Updated chlorinator unit when chlorinator is on/off only
* Scaffold
* Added the en translation
* Modified the name
* Basic functionality for config flow.
* Pulled in enough to validate config flow works.
* Update manifest.json
* initial data polling (water and air temp sensors)
* Adding sensors, debugging update function
* polling updates working
* support for new data format from library
* Updated entity_id, friendly name, conversion for ppm, attributes for hayward display units, MSPSystemID and component systemID
* Fixed errors for PR
* clean up
* Add login exc, check if configured, test login.
* Remove debug print.
* Black formatting, ran isort, update requirements.
* Updated w isort. fix flake8 failures.
* Fix flake8 errors
* Fixed self.attrs to remove invalid self._ values - small change
* Missed on small change - fixing attributes
* Updated naming, updated unit of measure, updated icon, bumped omnilog…
* Updated to fix flake8 issues in __init__.py and config_flow.py
* Updated test_config_flow.py to pass, updated config_flow.py to correct errors in test
* Remove comments in preparation for PR
* update .covezragerc
* Formatting fix
* Rewrote sensors to dynamically add all BOWs, pumps, clorinators. Still to do - add CSAD sensors.
* Rewrote sensors to dynamically add all BOWs, pumps, clorinators. Still to do - add CSAD sensors.
* Added CSAD sensors for pools that have them.
* Added CSAD sensors for pools that have them.
* Fixed CSAD to not create if blank or don't exist, removed broad except usage to pass linting.
* Updated entity naming convention. Fixed linting issues.
* Added device association to the back yard / omnilogic system
* Removed .0 from ppm values when returning imperial values for salt sensor
* Updated to return state = None for water temp when pump is off, handled Chlorinator operatingMode = 2, and added PlatformNotReady check
* Corrected exception from Omnilogic library
* Bumped omnilogic to 0.3.7. Added alarm sensor/data to sensors. Handle pump off condition for ph and orp sensors.
* Bumped omnilogic to 0.3.7. Added alarm sensor/data to sensors. Handle pump off condition for ph and orp sensors.
* Bumped omnilogic to 0.3.7. Added alarm sensor/data to sensors. Handle pump off condition for ph and orp sensors.
* Removed nested_lookup dependency, bumped omnilogic.py to 0.3.8.
* Fixed lint error
* Added logging for sensor creation.
* Fixed linting errors with logging.
* Fixed explicit chaining of raised error. Fixed issue with alarm sensor.
* Fixed manifest.json based on feedback.
* Fixed self.attrs, should_poll, CoordinatorEntity, SCAN_INTERVAL from comments in PR.
* Addressed unique_id, moved data update coordinator, addressed minor other issues from testing
* Created main OmniLogic entity for common items, reworked DataUpdateCoordinator to it's own class.
* Addressed config_schema not used in __init__.py
* Fixed linting issues.
* Addressed several comments, still todo - separate sensor classes.
* Split the Omnilogic Sensors into separate logical classes for simpler logic.
* Fixed snake case lint error for AddAlarms (to add_alarms)
* Addressed config_flow issues from comments.
* Changed addressed ConfigNotReady issue from comments.
* Updated strings.json and generated corrected en.json with translations.
* Updated en.json to standard generated file.
* Added config_flow tests and updated issue with config_flow on cannot_connect
* Added test case for incomplete information entered.
* Compressed logic in the sensor classes to reduce duplication.
* Updated strings.json for polling_interval, added generic exception handling on config flow.
* Removed omnilogic from the .coveragerc omit file.
* Updated test_config_flow to follow recommended pattern.
* Excluded sensor.py from test coverage tests.
* Corected minor issues in test_config_flow from comments
* Fixed linting issues on last commits
* Fixed linting issues.
* Corrected issue when temp state is not available from Omnilogic
* Added omnililogic_common.py from .coveragerc to bypass test coverage check.
* Return false on Login Exception, handle OmniLogicException in config_flow and in tests.
* Handle all exceptions and in config_flow and tests, clarified test naming.
* Broke out test cases per comments.
* Regenerated en.json file.
* Addressed changes from comments in PR.
* Added session and bumped API to 0.4.0, addressed other comments from PR.
* Addressed entitydata (missed earlier).
* Fixed pylint issue
* Added test case for options flow in test_config_flow.py
* Removed super() and used self when calling methods in current class.
* Addressed comments in PR.
* Addressed comments in PR.
* Updated translations file.
* Rewrote data coordinator to output dict for easy searching.
* Updated chlorinator unit when chlorinator is on/off only
* Fixed ORP method not being @property, fixed unique_id potential issue. Does not address comments from PR.
* Rewrote coordinator for updated dict structure, rewrote sensors to parse new data structure.
* Added alarms as attributes on all entities which support alarm reporting.
* Updated SENSOR_TYPES to sensor_types to adhere to snake case in pylint.
* Addressed PR comments.
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Removed binary sensor conditions (alarms, on/off sensor types) and added ability for multiple guard conditions
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Updated per comments in PR for Pump Type and removal of force_update().
* Update homeassistant/components/omnilogic/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/omnilogic/common.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Correctly asserting conditions for the login exception case.
* Update .coveragerc
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Mike Hershberger <mike.hershberger@gmail.com>
Co-authored-by: Chad <54695185+chadlyy@users.noreply.github.com>
Co-authored-by: Tim Empringham <tim.empringham@live.ca>
Co-authored-by: djtimca <60706061+djtimca@users.noreply.github.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>