core/homeassistant/components/incomfort/strings.json

153 lines
6.4 KiB
JSON
Raw Normal View History

{
"config": {
"step": {
"user": {
"description": "Set up new Intergas gateway. Note that some older systems might not accept credentials to be set up. For newer devices authentication is required.",
"data": {
"host": "[%key:common::config_flow::data::host%]",
"username": "[%key:common::config_flow::data::username%]",
"password": "[%key:common::config_flow::data::password%]"
},
"data_description": {
"host": "Hostname or IP-address of the Intergas gateway.",
"username": "The username to log into the gateway. This is `admin` in most cases.",
"password": "The password to log into the gateway, is printed at the bottom of the gateway or is `intergas` for some older devices."
}
},
"dhcp_auth": {
"title": "Set up Intergas gateway",
"description": "Please enter authentication details for gateway {host}",
"data": {
"username": "[%key:common::config_flow::data::username%]",
"password": "[%key:common::config_flow::data::password%]"
},
"data_description": {
"username": "The username to log into the gateway. This is `admin` in most cases.",
"password": "The password to log into the gateway, is printed at the bottom of the Gateway or is `intergas` for some older devices."
}
},
"dhcp_confirm": {
"title": "Set up Intergas gateway",
"description": "Do you want to set up the discovered Intergas gateway ({host})?"
},
"reauth_confirm": {
"data": {
"password": "[%key:common::config_flow::data::password%]"
},
"data_description": {
"password": "Correct the gateway password."
},
"description": "Re-authenticate to the gateway."
}
},
"abort": {
"already_configured": "[%key:common::config_flow::abort::already_configured_service%]",
"reauth_successful": "[%key:common::config_flow::abort::reauth_successful%]",
"reconfigure_successful": "[%key:common::config_flow::abort::reconfigure_successful%]"
},
"error": {
"auth_error": "Invalid credentials.",
"no_heaters": "No heaters found.",
"not_found": "No gateway found.",
"timeout_error": "Time out when connecting to the gateway.",
"unknown": "Unknown error when connecting to the gateway."
}
},
"exceptions": {
"no_heaters": {
"message": "[%key:component::incomfort::config::error::no_heaters%]"
},
"not_found": {
"message": "[%key:component::incomfort::config::error::not_found%]"
},
"timeout_error": {
"message": "[%key:component::incomfort::config::error::timeout_error%]"
},
"unknown": {
"message": "[%key:component::incomfort::config::error::unknown%]"
}
},
"options": {
"step": {
"init": {
"title": "Intergas gateway options",
"data": {
"legacy_setpoint_status": "Legacy setpoint handling"
},
"data_description": {
"legacy_setpoint_status": "Some older gateway models with an older firmware versions might not update the thermostat setpoint and override settings correctly. Enable this option if you experience issues in updating the setpoint for your thermostat. It will use the actual setpoint of the thermostat instead of the override. As side effect is that it might take a few minutes before the setpoint is updated."
}
}
}
},
"entity": {
"binary_sensor": {
"fault": {
"name": "Fault",
"state_attributes": {
"fault_code": {
"state": {
"none": "None"
}
}
}
},
"is_burning": {
"name": "Burner"
},
"is_pumping": {
"name": "Pump"
},
"is_tapping": {
"name": "Hot water tap"
}
},
"sensor": {
"tap_temperature": {
"name": "Tap temperature"
}
},
"water_heater": {
"boiler": {
"state": {
"unknown": "Unknown",
"opentherm": "OpenTherm",
"boiler_ext": "Boiler external",
"frost": "Frost protection",
"central_heating_rf": "Central heating rf",
"tapwater_int": "Tap water internal",
"sensor_test": "Sensor test",
"central_heating": "Central heating",
"standby": "Stand-by",
"postrun_boyler": "Post run boiler",
"service": "Service",
"tapwater": "Tap water",
"postrun_ch": "Post run central heating",
"boiler_int": "Boiler internal",
"buffer": "Buffer",
"sensor_fault_after_self_check_e0": "Sensor fault after self check",
"cv_temperature_too_high_e1": "Temperature too high",
"s1_and_s2_interchanged_e2": "S1 and S2 interchanged",
"no_flame_signal_e4": "No flame signal",
"poor_flame_signal_e5": "Poor flame signal",
"flame_detection_fault_e6": "Flame detection fault",
"incorrect_fan_speed_e8": "Incorrect fan speed",
"sensor_fault_s1_e10": "Sensor fault S1",
"sensor_fault_s1_e11": "[%key:component::incomfort::entity::water_heater::boiler::state::sensor_fault_s1_e10%]",
"sensor_fault_s1_e12": "[%key:component::incomfort::entity::water_heater::boiler::state::sensor_fault_s1_e10%]",
"sensor_fault_s1_e13": "[%key:component::incomfort::entity::water_heater::boiler::state::sensor_fault_s1_e10%]",
"sensor_fault_s1_e14": "[%key:component::incomfort::entity::water_heater::boiler::state::sensor_fault_s1_e10%]",
"sensor_fault_s2_e20": "Sensor fault S2",
"sensor_fault_s2_e21": "[%key:component::incomfort::entity::water_heater::boiler::state::sensor_fault_s2_e20%]",
"sensor_fault_s2_e22": "[%key:component::incomfort::entity::water_heater::boiler::state::sensor_fault_s2_e20%]",
"sensor_fault_s2_e23": "[%key:component::incomfort::entity::water_heater::boiler::state::sensor_fault_s2_e20%]",
"sensor_fault_s2_e24": "[%key:component::incomfort::entity::water_heater::boiler::state::sensor_fault_s2_e20%]",
"shortcut_outside_sensor_temperature_e27": "Shortcut outside sensor temperature",
"gas_valve_relay_faulty_e29": "Gas valve relay faulty",
"gas_valve_relay_faulty_e30": "[%key:component::incomfort::entity::water_heater::boiler::state::gas_valve_relay_faulty_e29%]"
}
}
}
}
}