core/homeassistant/components/shelly/strings.json

{
  "config": {
    "flow_title": "{name}",
    "step": {
      "user": {
        "description": "Before setup, battery-powered devices must be woken up, you can now wake the device up using a button on it.",
        "data": {
          "host": "[%key:common::config_flow::data::host%]",
          "port": "[%key:common::config_flow::data::port%]"
        },
        "data_description": {
          "host": "The hostname or IP address of the Shelly device to connect to.",
          "port": "The TCP port of the Shelly device to connect to (Gen2+)."
        }
      },
      "credentials": {
        "data": {
          "username": "[%key:common::config_flow::data::username%]",
          "password": "[%key:common::config_flow::data::password%]"
        }
      },
      "reauth_confirm": {
        "data": {
          "username": "[%key:common::config_flow::data::username%]",
          "password": "[%key:common::config_flow::data::password%]"
        }
      },
      "confirm_discovery": {
        "description": "Do you want to set up the {model} at {host}?\n\nBattery-powered devices that are password protected must be woken up before continuing with setting up.\nBattery-powered devices that are not password protected will be added when the device wakes up, you can now manually wake the device up using a button on it or wait for the next data update from the device."
      }
    },
    "error": {
      "cannot_connect": "[%key:common::config_flow::error::cannot_connect%]",
      "invalid_auth": "[%key:common::config_flow::error::invalid_auth%]",
      "unknown": "[%key:common::config_flow::error::unknown%]",
      "firmware_not_fully_provisioned": "Device not fully provisioned. Please contact Shelly support",
      "custom_port_not_supported": "Gen1 device does not support custom port."
    },
    "abort": {
      "already_configured": "[%key:common::config_flow::abort::already_configured_device%]",
      "unsupported_firmware": "The device is using an unsupported firmware version.",
      "reauth_successful": "[%key:common::config_flow::abort::reauth_successful%]",
      "reauth_unsuccessful": "Re-authentication was unsuccessful, please remove the integration and set it up again."
    }
  },
  "device_automation": {
    "trigger_subtype": {
      "button": "Button",
      "button1": "First button",
      "button2": "Second button",
      "button3": "Third button",
      "button4": "Fourth button"
    },
    "trigger_type": {
      "single": "{subtype} single clicked",
      "double": "{subtype} double clicked",
      "triple": "{subtype} triple clicked",
      "long": "{subtype} long clicked",
      "single_long": "{subtype} single clicked and then long clicked",
      "long_single": "{subtype} long clicked and then single clicked",
      "btn_down": "{subtype} button down",
      "btn_up": "{subtype} button up",
      "single_push": "{subtype} single push",
      "double_push": "{subtype} double push",
      "triple_push": "{subtype} triple push",
      "long_push": "{subtype} long push"
    }
  },
  "options": {
    "step": {
      "init": {
        "description": "Bluetooth scanning can be active or passive. With active, the Shelly requests data from nearby devices; with passive, the Shelly receives unsolicited data from nearby devices.",
        "data": {
          "ble_scanner_mode": "Bluetooth scanner mode"
        }
      }
    }
  },
  "selector": {
    "ble_scanner_mode": {
      "options": {
        "disabled": "[%key:common::state::disabled%]",
        "active": "[%key:common::state::active%]",
        "passive": "Passive"
      }
    }
  },
  "entity": {
    "binary_sensor": {
      "gas": {
        "state_attributes": {
          "detected": {
            "state": {
              "unknown": "Unknown",
              "none": "None",
              "mild": "Mild",
              "heavy": "Heavy",
              "test": "Test"
            }
          }
        }
      }
    },
    "event": {
      "input": {
        "state_attributes": {
          "event_type": {
            "state": {
              "btn_down": "Button down",
              "btn_up": "Button up",
              "double_push": "Double push",
              "double": "Double push",
              "long_push": "Long push",
              "long_single": "Long push and then short push",
              "long": "Long push",
              "single_long": "Short push and then long push",
              "single_push": "Single push",
              "single": "Single push",
              "triple_push": "Triple push",
              "triple": "Triple push"
            }
          }
        }
      }
    },
    "sensor": {
      "operation": {
        "state": {
          "unknown": "Unknown",
          "warmup": "Warm-up",
          "normal": "Normal",
          "fault": "Fault"
        },
        "state_attributes": {
          "self_test": {
            "state": {
              "not_completed": "Not completed",
              "completed": "Completed",
              "running": "Running",
              "pending": "Pending"
            }
          }
        }
      },
      "valve_status": {
        "state": {
          "checking": "Checking",
          "closed": "[%key:common::state::closed%]",
          "closing": "Closing",
          "failure": "Failure",
          "opened": "Opened",
          "opening": "Opening",
          "unknown": "[%key:component::shelly::entity::sensor::operation::state::unknown%]"
        }
      }
    }
  },
  "issues": {
    "device_not_calibrated": {
      "title": "Shelly device {device_name} is not calibrated",
      "description": "Shelly device {device_name} with IP address {ip_address} requires calibration. To calibrate the device, it must be rebooted after proper installation on the valve. You can reboot the device in its web panel, go to 'Settings' > 'Device Reboot'."
    },
    "push_update_failure": {
      "title": "Shelly device {device_name} push update failure",
      "description": "Home Assistant is not receiving push updates from the Shelly device {device_name} with IP address {ip_address}. Check the CoIoT configuration in the web panel of the device and your network configuration."
    },
    "deprecated_valve_switch": {
      "title": "The switch entity for Shelly Gas Valve is deprecated",
      "description": "The switch entity for Shelly Gas Valve is deprecated. A valve entity {entity} is available and should be used going forward. For this new valve entity you need to use {service} service."
    },
    "deprecated_valve_switch_entity": {
      "title": "Deprecated switch entity for Shelly Gas Valve detected in {info}",
      "description": "Your Shelly Gas Valve entity `{entity}` is being used in `{info}`. A valve entity is available and should be used going forward.\n\nPlease adjust `{info}` to fix this issue."
    },
    "unsupported_firmware": {
      "title": "Unsupported firmware for device {device_name}",
      "description": "Your Shelly device {device_name} with IP address {ip_address} is running an unsupported firmware. Please update the firmware.\n\nIf the device does not offer an update, check internet connectivity (gateway, DNS, time) and restart the device."
    }
  }
}