core/homeassistant/components/amcrest/switch.py

127 lines
4.0 KiB
Python
Raw Normal View History

"""Support for toggling Amcrest IP camera settings."""
import logging
Improve amcrest error handling and bump amcrest package to 1.5.3 (#24262) * Improve amcrest error handling and bump amcrest package to 1.5.3 amcrest package update fixes command retry, especially with Digest Authentication, and allows sending snapshot command without channel parameter. Get rid of persistent_notification. Errors at startup, other than login errors, are no longer fatal. Display debug messages about how many times an error has occurred in a row. Remove initial communications test. If camera is off line at startup this just delays the component setup. Handle urllib3 errors when getting data from commands that were sent with stream=True. If errors occur during camera update, try repeating until it works or the camera is determined to be off line. Drop channel parameter in snapshot command which allows camera to use its default channel, which is different in different camera models and firmware versions. Make entities unavailable if too many errors occur in a row. Add new configuration variables to control how many errors in a row should be interpreted as camera being offline, and how frequently to "ping" camera to see when it becomes available again. Add online binary_sensor option to indicate if camera is available (i.e., responding to commands.) * Update per review comments Remove max_errors and recheck_interval configuration variables and used fixed values instead. Move definition of AmcrestChecker class to module level. Change should_poll in camera.py to return a fixed value of True and move logic to update method.
2019-06-08 04:46:49 +00:00
from amcrest import AmcrestError
Add amcrest camera services and deprecate switches (#22949) * Add amcrest camera services and deprecate switches - Implement enabling and disabling motion detection from camera platform. - Add amcrest specific camera services for controlling audio stream, motion recording, continuous recording and camera color mode, as well as moving camera to PTZ preset and starting and stopping PTZ tour function. - Add camera attributes to indicate the state of the various camera settings controlled by the new services. - Deprecate switches in favor of camera services and attributes. * Rename services and move service handling to __init__.py Rename services from 'camera.amcrest_xxx' to 'amcrest.xxx'. This allows services to be documented in services.yaml. Add services.yaml. Reorganize hass.data[DATA_AMCREST] and do some general cleanup to make various platform modules more consistent. Move service handling code to __init__.py from camera.py. * Update per review comments, part 1 - Rebase - Add permission checking to services - Change cv.ensure_list_csv to cv.ensure_list - Add comment for "pointless-statement" in setup - Change handler_services to handled_services - Remove check if services have alreaday been registered - Pass ffmpeg instead of hass to AmcrestCam __init__ - Remove writing motion_detection attr from device_state_attributes - Change service methods from callbacks to coroutines * Update per review comments, part 2 - Use dispatcher to signal camera entities to run services. - Reorganize a bit, including moving a few things to new modules const.py & helpers.py. * Update per review comments, part 3 Move call data extraction from camera.py to __init__.py.
2019-04-25 05:39:49 +00:00
from homeassistant.const import CONF_NAME, CONF_SWITCHES
Improve amcrest error handling and bump amcrest package to 1.5.3 (#24262) * Improve amcrest error handling and bump amcrest package to 1.5.3 amcrest package update fixes command retry, especially with Digest Authentication, and allows sending snapshot command without channel parameter. Get rid of persistent_notification. Errors at startup, other than login errors, are no longer fatal. Display debug messages about how many times an error has occurred in a row. Remove initial communications test. If camera is off line at startup this just delays the component setup. Handle urllib3 errors when getting data from commands that were sent with stream=True. If errors occur during camera update, try repeating until it works or the camera is determined to be off line. Drop channel parameter in snapshot command which allows camera to use its default channel, which is different in different camera models and firmware versions. Make entities unavailable if too many errors occur in a row. Add new configuration variables to control how many errors in a row should be interpreted as camera being offline, and how frequently to "ping" camera to see when it becomes available again. Add online binary_sensor option to indicate if camera is available (i.e., responding to commands.) * Update per review comments Remove max_errors and recheck_interval configuration variables and used fixed values instead. Move definition of AmcrestChecker class to module level. Change should_poll in camera.py to return a fixed value of True and move logic to update method.
2019-06-08 04:46:49 +00:00
from homeassistant.helpers.dispatcher import async_dispatcher_connect
from homeassistant.helpers.entity import ToggleEntity
Improve amcrest error handling and bump amcrest package to 1.5.3 (#24262) * Improve amcrest error handling and bump amcrest package to 1.5.3 amcrest package update fixes command retry, especially with Digest Authentication, and allows sending snapshot command without channel parameter. Get rid of persistent_notification. Errors at startup, other than login errors, are no longer fatal. Display debug messages about how many times an error has occurred in a row. Remove initial communications test. If camera is off line at startup this just delays the component setup. Handle urllib3 errors when getting data from commands that were sent with stream=True. If errors occur during camera update, try repeating until it works or the camera is determined to be off line. Drop channel parameter in snapshot command which allows camera to use its default channel, which is different in different camera models and firmware versions. Make entities unavailable if too many errors occur in a row. Add new configuration variables to control how many errors in a row should be interpreted as camera being offline, and how frequently to "ping" camera to see when it becomes available again. Add online binary_sensor option to indicate if camera is available (i.e., responding to commands.) * Update per review comments Remove max_errors and recheck_interval configuration variables and used fixed values instead. Move definition of AmcrestChecker class to module level. Change should_poll in camera.py to return a fixed value of True and move logic to update method.
2019-06-08 04:46:49 +00:00
from .const import DATA_AMCREST, DEVICES, SERVICE_UPDATE
from .helpers import log_update_error, service_signal
_LOGGER = logging.getLogger(__name__)
2019-07-31 19:25:30 +00:00
MOTION_DETECTION = "motion_detection"
MOTION_RECORDING = "motion_recording"
Add amcrest camera services and deprecate switches (#22949) * Add amcrest camera services and deprecate switches - Implement enabling and disabling motion detection from camera platform. - Add amcrest specific camera services for controlling audio stream, motion recording, continuous recording and camera color mode, as well as moving camera to PTZ preset and starting and stopping PTZ tour function. - Add camera attributes to indicate the state of the various camera settings controlled by the new services. - Deprecate switches in favor of camera services and attributes. * Rename services and move service handling to __init__.py Rename services from 'camera.amcrest_xxx' to 'amcrest.xxx'. This allows services to be documented in services.yaml. Add services.yaml. Reorganize hass.data[DATA_AMCREST] and do some general cleanup to make various platform modules more consistent. Move service handling code to __init__.py from camera.py. * Update per review comments, part 1 - Rebase - Add permission checking to services - Change cv.ensure_list_csv to cv.ensure_list - Add comment for "pointless-statement" in setup - Change handler_services to handled_services - Remove check if services have alreaday been registered - Pass ffmpeg instead of hass to AmcrestCam __init__ - Remove writing motion_detection attr from device_state_attributes - Change service methods from callbacks to coroutines * Update per review comments, part 2 - Use dispatcher to signal camera entities to run services. - Reorganize a bit, including moving a few things to new modules const.py & helpers.py. * Update per review comments, part 3 Move call data extraction from camera.py to __init__.py.
2019-04-25 05:39:49 +00:00
# Switch types are defined like: Name, icon
SWITCHES = {
2019-07-31 19:25:30 +00:00
MOTION_DETECTION: ["Motion Detection", "mdi:run-fast"],
MOTION_RECORDING: ["Motion Recording", "mdi:record-rec"],
Add amcrest camera services and deprecate switches (#22949) * Add amcrest camera services and deprecate switches - Implement enabling and disabling motion detection from camera platform. - Add amcrest specific camera services for controlling audio stream, motion recording, continuous recording and camera color mode, as well as moving camera to PTZ preset and starting and stopping PTZ tour function. - Add camera attributes to indicate the state of the various camera settings controlled by the new services. - Deprecate switches in favor of camera services and attributes. * Rename services and move service handling to __init__.py Rename services from 'camera.amcrest_xxx' to 'amcrest.xxx'. This allows services to be documented in services.yaml. Add services.yaml. Reorganize hass.data[DATA_AMCREST] and do some general cleanup to make various platform modules more consistent. Move service handling code to __init__.py from camera.py. * Update per review comments, part 1 - Rebase - Add permission checking to services - Change cv.ensure_list_csv to cv.ensure_list - Add comment for "pointless-statement" in setup - Change handler_services to handled_services - Remove check if services have alreaday been registered - Pass ffmpeg instead of hass to AmcrestCam __init__ - Remove writing motion_detection attr from device_state_attributes - Change service methods from callbacks to coroutines * Update per review comments, part 2 - Use dispatcher to signal camera entities to run services. - Reorganize a bit, including moving a few things to new modules const.py & helpers.py. * Update per review comments, part 3 Move call data extraction from camera.py to __init__.py.
2019-04-25 05:39:49 +00:00
}
2019-07-31 19:25:30 +00:00
async def async_setup_platform(hass, config, async_add_entities, discovery_info=None):
"""Set up the IP Amcrest camera switch platform."""
if discovery_info is None:
return
name = discovery_info[CONF_NAME]
Improve amcrest error handling and bump amcrest package to 1.5.3 (#24262) * Improve amcrest error handling and bump amcrest package to 1.5.3 amcrest package update fixes command retry, especially with Digest Authentication, and allows sending snapshot command without channel parameter. Get rid of persistent_notification. Errors at startup, other than login errors, are no longer fatal. Display debug messages about how many times an error has occurred in a row. Remove initial communications test. If camera is off line at startup this just delays the component setup. Handle urllib3 errors when getting data from commands that were sent with stream=True. If errors occur during camera update, try repeating until it works or the camera is determined to be off line. Drop channel parameter in snapshot command which allows camera to use its default channel, which is different in different camera models and firmware versions. Make entities unavailable if too many errors occur in a row. Add new configuration variables to control how many errors in a row should be interpreted as camera being offline, and how frequently to "ping" camera to see when it becomes available again. Add online binary_sensor option to indicate if camera is available (i.e., responding to commands.) * Update per review comments Remove max_errors and recheck_interval configuration variables and used fixed values instead. Move definition of AmcrestChecker class to module level. Change should_poll in camera.py to return a fixed value of True and move logic to update method.
2019-06-08 04:46:49 +00:00
device = hass.data[DATA_AMCREST][DEVICES][name]
Add amcrest camera services and deprecate switches (#22949) * Add amcrest camera services and deprecate switches - Implement enabling and disabling motion detection from camera platform. - Add amcrest specific camera services for controlling audio stream, motion recording, continuous recording and camera color mode, as well as moving camera to PTZ preset and starting and stopping PTZ tour function. - Add camera attributes to indicate the state of the various camera settings controlled by the new services. - Deprecate switches in favor of camera services and attributes. * Rename services and move service handling to __init__.py Rename services from 'camera.amcrest_xxx' to 'amcrest.xxx'. This allows services to be documented in services.yaml. Add services.yaml. Reorganize hass.data[DATA_AMCREST] and do some general cleanup to make various platform modules more consistent. Move service handling code to __init__.py from camera.py. * Update per review comments, part 1 - Rebase - Add permission checking to services - Change cv.ensure_list_csv to cv.ensure_list - Add comment for "pointless-statement" in setup - Change handler_services to handled_services - Remove check if services have alreaday been registered - Pass ffmpeg instead of hass to AmcrestCam __init__ - Remove writing motion_detection attr from device_state_attributes - Change service methods from callbacks to coroutines * Update per review comments, part 2 - Use dispatcher to signal camera entities to run services. - Reorganize a bit, including moving a few things to new modules const.py & helpers.py. * Update per review comments, part 3 Move call data extraction from camera.py to __init__.py.
2019-04-25 05:39:49 +00:00
async_add_entities(
2019-07-31 19:25:30 +00:00
[
AmcrestSwitch(name, device, setting)
for setting in discovery_info[CONF_SWITCHES]
],
True,
)
class AmcrestSwitch(ToggleEntity):
"""Representation of an Amcrest IP camera switch."""
Add amcrest camera services and deprecate switches (#22949) * Add amcrest camera services and deprecate switches - Implement enabling and disabling motion detection from camera platform. - Add amcrest specific camera services for controlling audio stream, motion recording, continuous recording and camera color mode, as well as moving camera to PTZ preset and starting and stopping PTZ tour function. - Add camera attributes to indicate the state of the various camera settings controlled by the new services. - Deprecate switches in favor of camera services and attributes. * Rename services and move service handling to __init__.py Rename services from 'camera.amcrest_xxx' to 'amcrest.xxx'. This allows services to be documented in services.yaml. Add services.yaml. Reorganize hass.data[DATA_AMCREST] and do some general cleanup to make various platform modules more consistent. Move service handling code to __init__.py from camera.py. * Update per review comments, part 1 - Rebase - Add permission checking to services - Change cv.ensure_list_csv to cv.ensure_list - Add comment for "pointless-statement" in setup - Change handler_services to handled_services - Remove check if services have alreaday been registered - Pass ffmpeg instead of hass to AmcrestCam __init__ - Remove writing motion_detection attr from device_state_attributes - Change service methods from callbacks to coroutines * Update per review comments, part 2 - Use dispatcher to signal camera entities to run services. - Reorganize a bit, including moving a few things to new modules const.py & helpers.py. * Update per review comments, part 3 Move call data extraction from camera.py to __init__.py.
2019-04-25 05:39:49 +00:00
def __init__(self, name, device, setting):
"""Initialize the Amcrest switch."""
2019-07-31 19:25:30 +00:00
self._name = "{} {}".format(name, SWITCHES[setting][0])
Improve amcrest error handling and bump amcrest package to 1.5.3 (#24262) * Improve amcrest error handling and bump amcrest package to 1.5.3 amcrest package update fixes command retry, especially with Digest Authentication, and allows sending snapshot command without channel parameter. Get rid of persistent_notification. Errors at startup, other than login errors, are no longer fatal. Display debug messages about how many times an error has occurred in a row. Remove initial communications test. If camera is off line at startup this just delays the component setup. Handle urllib3 errors when getting data from commands that were sent with stream=True. If errors occur during camera update, try repeating until it works or the camera is determined to be off line. Drop channel parameter in snapshot command which allows camera to use its default channel, which is different in different camera models and firmware versions. Make entities unavailable if too many errors occur in a row. Add new configuration variables to control how many errors in a row should be interpreted as camera being offline, and how frequently to "ping" camera to see when it becomes available again. Add online binary_sensor option to indicate if camera is available (i.e., responding to commands.) * Update per review comments Remove max_errors and recheck_interval configuration variables and used fixed values instead. Move definition of AmcrestChecker class to module level. Change should_poll in camera.py to return a fixed value of True and move logic to update method.
2019-06-08 04:46:49 +00:00
self._signal_name = name
Add amcrest camera services and deprecate switches (#22949) * Add amcrest camera services and deprecate switches - Implement enabling and disabling motion detection from camera platform. - Add amcrest specific camera services for controlling audio stream, motion recording, continuous recording and camera color mode, as well as moving camera to PTZ preset and starting and stopping PTZ tour function. - Add camera attributes to indicate the state of the various camera settings controlled by the new services. - Deprecate switches in favor of camera services and attributes. * Rename services and move service handling to __init__.py Rename services from 'camera.amcrest_xxx' to 'amcrest.xxx'. This allows services to be documented in services.yaml. Add services.yaml. Reorganize hass.data[DATA_AMCREST] and do some general cleanup to make various platform modules more consistent. Move service handling code to __init__.py from camera.py. * Update per review comments, part 1 - Rebase - Add permission checking to services - Change cv.ensure_list_csv to cv.ensure_list - Add comment for "pointless-statement" in setup - Change handler_services to handled_services - Remove check if services have alreaday been registered - Pass ffmpeg instead of hass to AmcrestCam __init__ - Remove writing motion_detection attr from device_state_attributes - Change service methods from callbacks to coroutines * Update per review comments, part 2 - Use dispatcher to signal camera entities to run services. - Reorganize a bit, including moving a few things to new modules const.py & helpers.py. * Update per review comments, part 3 Move call data extraction from camera.py to __init__.py.
2019-04-25 05:39:49 +00:00
self._api = device.api
self._setting = setting
Add amcrest camera services and deprecate switches (#22949) * Add amcrest camera services and deprecate switches - Implement enabling and disabling motion detection from camera platform. - Add amcrest specific camera services for controlling audio stream, motion recording, continuous recording and camera color mode, as well as moving camera to PTZ preset and starting and stopping PTZ tour function. - Add camera attributes to indicate the state of the various camera settings controlled by the new services. - Deprecate switches in favor of camera services and attributes. * Rename services and move service handling to __init__.py Rename services from 'camera.amcrest_xxx' to 'amcrest.xxx'. This allows services to be documented in services.yaml. Add services.yaml. Reorganize hass.data[DATA_AMCREST] and do some general cleanup to make various platform modules more consistent. Move service handling code to __init__.py from camera.py. * Update per review comments, part 1 - Rebase - Add permission checking to services - Change cv.ensure_list_csv to cv.ensure_list - Add comment for "pointless-statement" in setup - Change handler_services to handled_services - Remove check if services have alreaday been registered - Pass ffmpeg instead of hass to AmcrestCam __init__ - Remove writing motion_detection attr from device_state_attributes - Change service methods from callbacks to coroutines * Update per review comments, part 2 - Use dispatcher to signal camera entities to run services. - Reorganize a bit, including moving a few things to new modules const.py & helpers.py. * Update per review comments, part 3 Move call data extraction from camera.py to __init__.py.
2019-04-25 05:39:49 +00:00
self._state = False
self._icon = SWITCHES[setting][1]
Improve amcrest error handling and bump amcrest package to 1.5.3 (#24262) * Improve amcrest error handling and bump amcrest package to 1.5.3 amcrest package update fixes command retry, especially with Digest Authentication, and allows sending snapshot command without channel parameter. Get rid of persistent_notification. Errors at startup, other than login errors, are no longer fatal. Display debug messages about how many times an error has occurred in a row. Remove initial communications test. If camera is off line at startup this just delays the component setup. Handle urllib3 errors when getting data from commands that were sent with stream=True. If errors occur during camera update, try repeating until it works or the camera is determined to be off line. Drop channel parameter in snapshot command which allows camera to use its default channel, which is different in different camera models and firmware versions. Make entities unavailable if too many errors occur in a row. Add new configuration variables to control how many errors in a row should be interpreted as camera being offline, and how frequently to "ping" camera to see when it becomes available again. Add online binary_sensor option to indicate if camera is available (i.e., responding to commands.) * Update per review comments Remove max_errors and recheck_interval configuration variables and used fixed values instead. Move definition of AmcrestChecker class to module level. Change should_poll in camera.py to return a fixed value of True and move logic to update method.
2019-06-08 04:46:49 +00:00
self._unsub_dispatcher = None
@property
def name(self):
"""Return the name of the switch if any."""
return self._name
@property
def is_on(self):
"""Return true if switch is on."""
Add amcrest camera services and deprecate switches (#22949) * Add amcrest camera services and deprecate switches - Implement enabling and disabling motion detection from camera platform. - Add amcrest specific camera services for controlling audio stream, motion recording, continuous recording and camera color mode, as well as moving camera to PTZ preset and starting and stopping PTZ tour function. - Add camera attributes to indicate the state of the various camera settings controlled by the new services. - Deprecate switches in favor of camera services and attributes. * Rename services and move service handling to __init__.py Rename services from 'camera.amcrest_xxx' to 'amcrest.xxx'. This allows services to be documented in services.yaml. Add services.yaml. Reorganize hass.data[DATA_AMCREST] and do some general cleanup to make various platform modules more consistent. Move service handling code to __init__.py from camera.py. * Update per review comments, part 1 - Rebase - Add permission checking to services - Change cv.ensure_list_csv to cv.ensure_list - Add comment for "pointless-statement" in setup - Change handler_services to handled_services - Remove check if services have alreaday been registered - Pass ffmpeg instead of hass to AmcrestCam __init__ - Remove writing motion_detection attr from device_state_attributes - Change service methods from callbacks to coroutines * Update per review comments, part 2 - Use dispatcher to signal camera entities to run services. - Reorganize a bit, including moving a few things to new modules const.py & helpers.py. * Update per review comments, part 3 Move call data extraction from camera.py to __init__.py.
2019-04-25 05:39:49 +00:00
return self._state
def turn_on(self, **kwargs):
"""Turn setting on."""
Improve amcrest error handling and bump amcrest package to 1.5.3 (#24262) * Improve amcrest error handling and bump amcrest package to 1.5.3 amcrest package update fixes command retry, especially with Digest Authentication, and allows sending snapshot command without channel parameter. Get rid of persistent_notification. Errors at startup, other than login errors, are no longer fatal. Display debug messages about how many times an error has occurred in a row. Remove initial communications test. If camera is off line at startup this just delays the component setup. Handle urllib3 errors when getting data from commands that were sent with stream=True. If errors occur during camera update, try repeating until it works or the camera is determined to be off line. Drop channel parameter in snapshot command which allows camera to use its default channel, which is different in different camera models and firmware versions. Make entities unavailable if too many errors occur in a row. Add new configuration variables to control how many errors in a row should be interpreted as camera being offline, and how frequently to "ping" camera to see when it becomes available again. Add online binary_sensor option to indicate if camera is available (i.e., responding to commands.) * Update per review comments Remove max_errors and recheck_interval configuration variables and used fixed values instead. Move definition of AmcrestChecker class to module level. Change should_poll in camera.py to return a fixed value of True and move logic to update method.
2019-06-08 04:46:49 +00:00
if not self.available:
return
try:
if self._setting == MOTION_DETECTION:
2019-07-31 19:25:30 +00:00
self._api.motion_detection = "true"
Improve amcrest error handling and bump amcrest package to 1.5.3 (#24262) * Improve amcrest error handling and bump amcrest package to 1.5.3 amcrest package update fixes command retry, especially with Digest Authentication, and allows sending snapshot command without channel parameter. Get rid of persistent_notification. Errors at startup, other than login errors, are no longer fatal. Display debug messages about how many times an error has occurred in a row. Remove initial communications test. If camera is off line at startup this just delays the component setup. Handle urllib3 errors when getting data from commands that were sent with stream=True. If errors occur during camera update, try repeating until it works or the camera is determined to be off line. Drop channel parameter in snapshot command which allows camera to use its default channel, which is different in different camera models and firmware versions. Make entities unavailable if too many errors occur in a row. Add new configuration variables to control how many errors in a row should be interpreted as camera being offline, and how frequently to "ping" camera to see when it becomes available again. Add online binary_sensor option to indicate if camera is available (i.e., responding to commands.) * Update per review comments Remove max_errors and recheck_interval configuration variables and used fixed values instead. Move definition of AmcrestChecker class to module level. Change should_poll in camera.py to return a fixed value of True and move logic to update method.
2019-06-08 04:46:49 +00:00
elif self._setting == MOTION_RECORDING:
2019-07-31 19:25:30 +00:00
self._api.motion_recording = "true"
Improve amcrest error handling and bump amcrest package to 1.5.3 (#24262) * Improve amcrest error handling and bump amcrest package to 1.5.3 amcrest package update fixes command retry, especially with Digest Authentication, and allows sending snapshot command without channel parameter. Get rid of persistent_notification. Errors at startup, other than login errors, are no longer fatal. Display debug messages about how many times an error has occurred in a row. Remove initial communications test. If camera is off line at startup this just delays the component setup. Handle urllib3 errors when getting data from commands that were sent with stream=True. If errors occur during camera update, try repeating until it works or the camera is determined to be off line. Drop channel parameter in snapshot command which allows camera to use its default channel, which is different in different camera models and firmware versions. Make entities unavailable if too many errors occur in a row. Add new configuration variables to control how many errors in a row should be interpreted as camera being offline, and how frequently to "ping" camera to see when it becomes available again. Add online binary_sensor option to indicate if camera is available (i.e., responding to commands.) * Update per review comments Remove max_errors and recheck_interval configuration variables and used fixed values instead. Move definition of AmcrestChecker class to module level. Change should_poll in camera.py to return a fixed value of True and move logic to update method.
2019-06-08 04:46:49 +00:00
except AmcrestError as error:
2019-07-31 19:25:30 +00:00
log_update_error(_LOGGER, "turn on", self.name, "switch", error)
def turn_off(self, **kwargs):
"""Turn setting off."""
Improve amcrest error handling and bump amcrest package to 1.5.3 (#24262) * Improve amcrest error handling and bump amcrest package to 1.5.3 amcrest package update fixes command retry, especially with Digest Authentication, and allows sending snapshot command without channel parameter. Get rid of persistent_notification. Errors at startup, other than login errors, are no longer fatal. Display debug messages about how many times an error has occurred in a row. Remove initial communications test. If camera is off line at startup this just delays the component setup. Handle urllib3 errors when getting data from commands that were sent with stream=True. If errors occur during camera update, try repeating until it works or the camera is determined to be off line. Drop channel parameter in snapshot command which allows camera to use its default channel, which is different in different camera models and firmware versions. Make entities unavailable if too many errors occur in a row. Add new configuration variables to control how many errors in a row should be interpreted as camera being offline, and how frequently to "ping" camera to see when it becomes available again. Add online binary_sensor option to indicate if camera is available (i.e., responding to commands.) * Update per review comments Remove max_errors and recheck_interval configuration variables and used fixed values instead. Move definition of AmcrestChecker class to module level. Change should_poll in camera.py to return a fixed value of True and move logic to update method.
2019-06-08 04:46:49 +00:00
if not self.available:
return
try:
if self._setting == MOTION_DETECTION:
2019-07-31 19:25:30 +00:00
self._api.motion_detection = "false"
Improve amcrest error handling and bump amcrest package to 1.5.3 (#24262) * Improve amcrest error handling and bump amcrest package to 1.5.3 amcrest package update fixes command retry, especially with Digest Authentication, and allows sending snapshot command without channel parameter. Get rid of persistent_notification. Errors at startup, other than login errors, are no longer fatal. Display debug messages about how many times an error has occurred in a row. Remove initial communications test. If camera is off line at startup this just delays the component setup. Handle urllib3 errors when getting data from commands that were sent with stream=True. If errors occur during camera update, try repeating until it works or the camera is determined to be off line. Drop channel parameter in snapshot command which allows camera to use its default channel, which is different in different camera models and firmware versions. Make entities unavailable if too many errors occur in a row. Add new configuration variables to control how many errors in a row should be interpreted as camera being offline, and how frequently to "ping" camera to see when it becomes available again. Add online binary_sensor option to indicate if camera is available (i.e., responding to commands.) * Update per review comments Remove max_errors and recheck_interval configuration variables and used fixed values instead. Move definition of AmcrestChecker class to module level. Change should_poll in camera.py to return a fixed value of True and move logic to update method.
2019-06-08 04:46:49 +00:00
elif self._setting == MOTION_RECORDING:
2019-07-31 19:25:30 +00:00
self._api.motion_recording = "false"
Improve amcrest error handling and bump amcrest package to 1.5.3 (#24262) * Improve amcrest error handling and bump amcrest package to 1.5.3 amcrest package update fixes command retry, especially with Digest Authentication, and allows sending snapshot command without channel parameter. Get rid of persistent_notification. Errors at startup, other than login errors, are no longer fatal. Display debug messages about how many times an error has occurred in a row. Remove initial communications test. If camera is off line at startup this just delays the component setup. Handle urllib3 errors when getting data from commands that were sent with stream=True. If errors occur during camera update, try repeating until it works or the camera is determined to be off line. Drop channel parameter in snapshot command which allows camera to use its default channel, which is different in different camera models and firmware versions. Make entities unavailable if too many errors occur in a row. Add new configuration variables to control how many errors in a row should be interpreted as camera being offline, and how frequently to "ping" camera to see when it becomes available again. Add online binary_sensor option to indicate if camera is available (i.e., responding to commands.) * Update per review comments Remove max_errors and recheck_interval configuration variables and used fixed values instead. Move definition of AmcrestChecker class to module level. Change should_poll in camera.py to return a fixed value of True and move logic to update method.
2019-06-08 04:46:49 +00:00
except AmcrestError as error:
2019-07-31 19:25:30 +00:00
log_update_error(_LOGGER, "turn off", self.name, "switch", error)
Improve amcrest error handling and bump amcrest package to 1.5.3 (#24262) * Improve amcrest error handling and bump amcrest package to 1.5.3 amcrest package update fixes command retry, especially with Digest Authentication, and allows sending snapshot command without channel parameter. Get rid of persistent_notification. Errors at startup, other than login errors, are no longer fatal. Display debug messages about how many times an error has occurred in a row. Remove initial communications test. If camera is off line at startup this just delays the component setup. Handle urllib3 errors when getting data from commands that were sent with stream=True. If errors occur during camera update, try repeating until it works or the camera is determined to be off line. Drop channel parameter in snapshot command which allows camera to use its default channel, which is different in different camera models and firmware versions. Make entities unavailable if too many errors occur in a row. Add new configuration variables to control how many errors in a row should be interpreted as camera being offline, and how frequently to "ping" camera to see when it becomes available again. Add online binary_sensor option to indicate if camera is available (i.e., responding to commands.) * Update per review comments Remove max_errors and recheck_interval configuration variables and used fixed values instead. Move definition of AmcrestChecker class to module level. Change should_poll in camera.py to return a fixed value of True and move logic to update method.
2019-06-08 04:46:49 +00:00
@property
def available(self):
"""Return True if entity is available."""
return self._api.available
def update(self):
"""Update setting state."""
Improve amcrest error handling and bump amcrest package to 1.5.3 (#24262) * Improve amcrest error handling and bump amcrest package to 1.5.3 amcrest package update fixes command retry, especially with Digest Authentication, and allows sending snapshot command without channel parameter. Get rid of persistent_notification. Errors at startup, other than login errors, are no longer fatal. Display debug messages about how many times an error has occurred in a row. Remove initial communications test. If camera is off line at startup this just delays the component setup. Handle urllib3 errors when getting data from commands that were sent with stream=True. If errors occur during camera update, try repeating until it works or the camera is determined to be off line. Drop channel parameter in snapshot command which allows camera to use its default channel, which is different in different camera models and firmware versions. Make entities unavailable if too many errors occur in a row. Add new configuration variables to control how many errors in a row should be interpreted as camera being offline, and how frequently to "ping" camera to see when it becomes available again. Add online binary_sensor option to indicate if camera is available (i.e., responding to commands.) * Update per review comments Remove max_errors and recheck_interval configuration variables and used fixed values instead. Move definition of AmcrestChecker class to module level. Change should_poll in camera.py to return a fixed value of True and move logic to update method.
2019-06-08 04:46:49 +00:00
if not self.available:
return
_LOGGER.debug("Updating %s switch", self._name)
try:
if self._setting == MOTION_DETECTION:
detection = self._api.is_motion_detector_on()
elif self._setting == MOTION_RECORDING:
detection = self._api.is_record_on_motion_detection()
self._state = detection
except AmcrestError as error:
2019-07-31 19:25:30 +00:00
log_update_error(_LOGGER, "update", self.name, "switch", error)
@property
def icon(self):
"""Return the icon for the switch."""
return self._icon
Improve amcrest error handling and bump amcrest package to 1.5.3 (#24262) * Improve amcrest error handling and bump amcrest package to 1.5.3 amcrest package update fixes command retry, especially with Digest Authentication, and allows sending snapshot command without channel parameter. Get rid of persistent_notification. Errors at startup, other than login errors, are no longer fatal. Display debug messages about how many times an error has occurred in a row. Remove initial communications test. If camera is off line at startup this just delays the component setup. Handle urllib3 errors when getting data from commands that were sent with stream=True. If errors occur during camera update, try repeating until it works or the camera is determined to be off line. Drop channel parameter in snapshot command which allows camera to use its default channel, which is different in different camera models and firmware versions. Make entities unavailable if too many errors occur in a row. Add new configuration variables to control how many errors in a row should be interpreted as camera being offline, and how frequently to "ping" camera to see when it becomes available again. Add online binary_sensor option to indicate if camera is available (i.e., responding to commands.) * Update per review comments Remove max_errors and recheck_interval configuration variables and used fixed values instead. Move definition of AmcrestChecker class to module level. Change should_poll in camera.py to return a fixed value of True and move logic to update method.
2019-06-08 04:46:49 +00:00
async def async_on_demand_update(self):
"""Update state."""
self.async_schedule_update_ha_state(True)
async def async_added_to_hass(self):
"""Subscribe to update signal."""
self._unsub_dispatcher = async_dispatcher_connect(
2019-07-31 19:25:30 +00:00
self.hass,
service_signal(SERVICE_UPDATE, self._signal_name),
self.async_on_demand_update,
)
Improve amcrest error handling and bump amcrest package to 1.5.3 (#24262) * Improve amcrest error handling and bump amcrest package to 1.5.3 amcrest package update fixes command retry, especially with Digest Authentication, and allows sending snapshot command without channel parameter. Get rid of persistent_notification. Errors at startup, other than login errors, are no longer fatal. Display debug messages about how many times an error has occurred in a row. Remove initial communications test. If camera is off line at startup this just delays the component setup. Handle urllib3 errors when getting data from commands that were sent with stream=True. If errors occur during camera update, try repeating until it works or the camera is determined to be off line. Drop channel parameter in snapshot command which allows camera to use its default channel, which is different in different camera models and firmware versions. Make entities unavailable if too many errors occur in a row. Add new configuration variables to control how many errors in a row should be interpreted as camera being offline, and how frequently to "ping" camera to see when it becomes available again. Add online binary_sensor option to indicate if camera is available (i.e., responding to commands.) * Update per review comments Remove max_errors and recheck_interval configuration variables and used fixed values instead. Move definition of AmcrestChecker class to module level. Change should_poll in camera.py to return a fixed value of True and move logic to update method.
2019-06-08 04:46:49 +00:00
async def async_will_remove_from_hass(self):
"""Disconnect from update signal."""
self._unsub_dispatcher()