mirror of https://github.com/ARMmbed/mbed-os.git
Due to post-build script not supporting custom board, both the below UART configurations are enabled on NuMaker-IoT-M2354 board: - UART0 PA7/PA6 enabled by bl2.bin - UART0 PB9/PB8 enabled by tfm_s.bin and later by mbed Both PA7/PA6 and PB9/PB8 enabled on UART0, PB8 gets disturbed and stdin mis-behaves on NuMaker-IoT-M2354 board. NuMaker-M2354 : UART TX/RX = UART0 PA7/PA6 NuMaker-IoT_M2354 : UART TX/RX = UART0 PB9/PB8 This bugfix tries to enable post-build for custom board to some degree (not completely), with Mbed CLI. NOTE: For Mbed CLI, the build process still sees NuMaker-M2354's partition/ and applies its mcuboot build options. Custom board must align on these. |
||
---|---|---|
.. | ||
ARM_MUSCA.py | ||
LPC.py | ||
LPC55S69.py | ||
NU_M2354.py | ||
PSOC6.py | ||
REALTEK_RTL8195AM.py | ||
__init__.py | ||
lint.py | ||
musca_b1-root-rsa-3072.md | ||
musca_b1-root-rsa-3072.pem | ||
musca_b1-root-rsa-3072_1.pem | ||
musca_s1-root-rsa-3072.md | ||
musca_s1-root-rsa-3072.pem | ||
musca_s1-root-rsa-3072_1.pem | ||
nuvoton_m2354-root-rsa-3072.md | ||
nuvoton_m2354-root-rsa-3072.pem | ||
nuvoton_m2354-root-rsa-3072_1.pem |