mbed-os/targets/TARGET_STM/sleep.c

113 lines
3.8 KiB
C

/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2016, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#if DEVICE_SLEEP
#include "sleep_api.h"
#include "rtc_api_hal.h"
extern void HAL_SuspendTick(void);
extern void HAL_ResumeTick(void);
void hal_sleep(void)
{
// Disable IRQs
core_util_critical_section_enter();
// Stop HAL tick to avoid to exit sleep in 1ms
HAL_SuspendTick();
// Request to enter SLEEP mode
HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI);
// Restart HAL tick
HAL_ResumeTick();
// Enable IRQs
core_util_critical_section_exit();
}
void hal_deepsleep(void)
{
// Disable IRQs
core_util_critical_section_enter();
// Stop HAL tick
HAL_SuspendTick();
uint32_t EnterTimeUS = us_ticker_read();
// Request to enter STOP mode with regulator in low power mode
#if TARGET_STM32L4
int pwrClockEnabled = __HAL_RCC_PWR_IS_CLK_ENABLED();
int lowPowerModeEnabled = PWR->CR1 & PWR_CR1_LPR;
if (!pwrClockEnabled) {
__HAL_RCC_PWR_CLK_ENABLE();
}
if (lowPowerModeEnabled) {
HAL_PWREx_DisableLowPowerRunMode();
}
HAL_PWREx_EnterSTOP2Mode(PWR_STOPENTRY_WFI);
if (lowPowerModeEnabled) {
HAL_PWREx_EnableLowPowerRunMode();
}
if (!pwrClockEnabled) {
__HAL_RCC_PWR_CLK_DISABLE();
}
#else /* TARGET_STM32L4 */
HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
#endif /* TARGET_STM32L4 */
// Restart HAL tick
HAL_ResumeTick();
// Enable IRQs
core_util_critical_section_exit();
// After wake-up from STOP reconfigure the PLL
SetSysClock();
TIM_HandleTypeDef TimMasterHandle;
TimMasterHandle.Instance = TIM_MST;
__HAL_TIM_SET_COUNTER(&TimMasterHandle, EnterTimeUS);
#if DEVICE_RTC
/* Wait for RTC RSF bit synchro if RTC is configured */
#if (TARGET_STM32F2) || (TARGET_STM32F4) || (TARGET_STM32F7)
if (READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL)) {
#else /* (TARGET_STM32F2) || (TARGET_STM32F4) || (TARGET_STM32F7) */
if (__HAL_RCC_GET_RTC_SOURCE()) {
#endif /* (TARGET_STM32F2) || (TARGET_STM32F4) || (TARGET_STM32F7) */
rtc_synchronize();
}
#endif
}
#endif