ARMmbed
/
mbed-os
mirror of https://github.com/ARMmbed/mbed-os.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
mbed-os/targets/TARGET_NUVOTON/TARGET_NUC472/device/StdDriver/nuc472_can.c

751 lines
25 KiB
C
Raw Blame History

/**************************************************************************//**
* @file CAN.c
* @version V1.00
* $Revision: 14 $
* $Date: 14/10/06 5:38p $
* @brief NUC472/NUC442 CAN driver source file
*
* @note
* Copyright (C) 2013 Nuvoton Technology Corp. All rights reserved.
*****************************************************************************/
#include "NUC472_442.h"
/** @addtogroup NUC472_442_Device_Driver NUC472/NUC442 Device Driver
@{
*/
/** @addtogroup NUC472_442_CAN_Driver CAN Driver
@{
*/
/** @addtogroup NUC472_442_CAN_EXPORTED_FUNCTIONS CAN Exported Functions
@{
*/
#include <stdio.h>
/// @cond HIDDEN_SYMBOLS
static uint32_t GetFreeIF(CAN_T *tCAN);
//#define DEBUG_PRINTF printf
#define DEBUG_PRINTF(...)
/**
* @brief Check if SmartCard slot is presented.
* @param[in] tCAN The base address of can module.
* @retval 0 IF0 is free
* @retval 1 IF1 is free
* @retval 2 No IF is free
* @details Search the first free message interface, starting from 0.
*/
static uint32_t GetFreeIF(CAN_T *tCAN)
{
if((tCAN->IF[0].CREQ & CAN_IF_CREQ_BUSY_Msk) == 0)
return 0;
else if((tCAN->IF[1].CREQ & CAN_IF_CREQ_BUSY_Msk) == 0)
return 1;
else
return 2;
}
/**
* @brief Enter initialization mode
* @param[in] tCAN The base address of can module.
* @return None
* @details This function is used to set CAN to enter initialization mode and enable access bit timing
* register. After bit timing configuration ready, user must call CAN_LeaveInitMode()
* to leave initialization mode and lock bit timing register to let new configuration
* take effect.
*/
void CAN_EnterInitMode(CAN_T *tCAN)
{
tCAN->CON |= CAN_CON_INIT_Msk;
tCAN->CON |= CAN_CON_CCE_Msk;
}
/**
* @brief Leave initialization mode
* @param[in] tCAN The base address of can module.
* @return None
* @details This function is used to set CAN to leave initialization mode to let
* bit timing configuration take effect after configuration ready.
*/
void CAN_LeaveInitMode(CAN_T *tCAN)
{
tCAN->CON &= (~(CAN_CON_INIT_Msk | CAN_CON_CCE_Msk));
while(tCAN->CON & CAN_CON_INIT_Msk); /* Check INIT bit is released */
}
/**
* @brief Wait message into message buffer in basic mode.
* @param[in] tCAN The base address of can module.
* @return None
* @details This function is used to wait message into message buffer in basic mode. Please notice the
* function is polling NEWDAT bit of MCON register by while loop and it is used in basic mode.
*/
void CAN_WaitMsg(CAN_T *tCAN)
{
tCAN->STATUS = 0x0; /* clr status */
while (1) {
if(tCAN->IF[1].MCON & CAN_IF_MCON_NEWDAT_Msk) { /* check new data */
DEBUG_PRINTF("New Data IN\n");
break;
}
if(tCAN->STATUS & CAN_STATUS_RXOK_Msk) {
DEBUG_PRINTF("Rx OK\n");
}
if(tCAN->STATUS & CAN_STATUS_LEC_Msk) {
DEBUG_PRINTF("Error\n");
}
}
}
/**
* @brief Get current bit rate
* @param[in] tCAN The base address of can module.
* @return Current Bit-Rate (kilo bit per second)
* @details Return current CAN bit rate according to the user bit-timing parameter settings
*/
uint32_t CAN_GetCANBitRate(CAN_T *tCAN)
{
uint8_t u8Tseg1,u8Tseg2;
uint32_t u32Bpr;
u8Tseg1 = (tCAN->BTIME & CAN_BTIME_TSEG1_Msk) >> CAN_BTIME_TSEG1_Pos;
u8Tseg2 = (tCAN->BTIME & CAN_BTIME_TSEG2_Msk) >> CAN_BTIME_TSEG2_Pos;
u32Bpr = (tCAN->BTIME & CAN_BTIME_BRP_Msk) | (tCAN->BRPE << 6);
return (SystemCoreClock/(u32Bpr+1)/(u8Tseg1 + u8Tseg2 + 3));
}
/**
* @brief Switch the CAN into test mode.
* @param[in] tCAN The base address of can module.
* @param[in] u8TestMask Specifies the configuration in test modes
* CAN_TEST_BASIC_Msk : Enable basic mode of test mode
* CAN_TESTR_SILENT_Msk : Enable silent mode of test mode
* CAN_TESTR_LBACK_Msk : Enable Loop Back Mode of test mode
* CAN_TESTR_TX0_Msk/CAN_TESTR_TX1_Msk: Control CAN_TX pin bit field
* @return None
* @details Switch the CAN into test mode. There are four test mode (BASIC/SILENT/LOOPBACK/
* LOOPBACK combined SILENT/CONTROL_TX_PIN)could be selected. After setting test mode,user
* must call CAN_LeaveInitMode() to let the setting take effect.
*/
void CAN_EnterTestMode(CAN_T *tCAN, uint8_t u8TestMask)
{
tCAN->CON |= CAN_CON_TEST_Msk;
tCAN->TEST = u8TestMask;
}
/**
* @brief Leave the test mode
* @param[in] tCAN The base address of can module.
* @return None
* @details This function is used to Leave the test mode (switch into normal mode).
*/
void CAN_LeaveTestMode(CAN_T *tCAN)
{
tCAN->CON |= CAN_CON_TEST_Msk;
tCAN->TEST &= ~(CAN_TEST_LBACK_Msk | CAN_TEST_SILENT_Msk | CAN_TEST_BASIC_Msk);
tCAN->CON &= (~CAN_CON_TEST_Msk);
}
/**
* @brief Get the waiting status of a received message.
* @param[in] tCAN The base address of can module.
* @param[in] u8MsgObj Specifies the Message object number, from 0 to 31.
* @retval non-zero The corresponding message object has a new data bit is set.
* @retval 0 No message object has new data.
* @details This function is used to get the waiting status of a received message.
*/
uint32_t CAN_IsNewDataReceived(CAN_T *tCAN, uint8_t u8MsgObj)
{
return (u8MsgObj < 16 ? tCAN->NDAT1 & (1 << u8MsgObj) : tCAN->NDAT2 & (1 << (u8MsgObj-16)));
}
/**
* @brief Send CAN message in BASIC mode of test mode
* @param[in] tCAN The base address of can module.
* @param[in] pCanMsg Pointer to the message structure containing data to transmit.
* @return TRUE: Transmission OK
* FALSE: Check busy flag of interface 0 is timeout
* @details The function is used to send CAN message in BASIC mode of test mode. Before call the API,
* the user should be call CAN_EnterTestMode(CAN_TESTR_BASIC) and let CAN controller enter
* basic mode of test mode. Please notice IF1 Registers used as Tx Buffer in basic mode.
*/
int32_t CAN_BasicSendMsg(CAN_T *tCAN, STR_CANMSG_T* pCanMsg)
{
uint32_t i=0;
while(tCAN->IF[0].CREQ & CAN_IF_CREQ_BUSY_Msk);
tCAN->STATUS &= (~CAN_STATUS_TXOK_Msk);
tCAN->IF[0].CMASK = CAN_IF_CMASK_WRRD_Msk;
if (pCanMsg->IdType == CAN_STD_ID) {
/* standard ID*/
tCAN->IF[0].ARB1 = 0;
tCAN->IF[0].ARB2 = (((pCanMsg->Id)&0x7FF)<<2) ;
} else {
/* extended ID*/
tCAN->IF[0].ARB1 = (pCanMsg->Id)&0xFFFF;
tCAN->IF[0].ARB2 = ((pCanMsg->Id)&0x1FFF0000)>>16 | CAN_IF_ARB2_XTD_Msk;
}
if(pCanMsg->FrameType)
tCAN->IF[0].ARB2 |= CAN_IF_ARB2_DIR_Msk;
else
tCAN->IF[0].ARB2 &= (~CAN_IF_ARB2_DIR_Msk);
tCAN->IF[0].MCON = (tCAN->IF[0].MCON & (~CAN_IF_MCON_DLC_Msk)) | pCanMsg->DLC;
tCAN->IF[0].DAT_A1 = ((uint16_t)pCanMsg->Data[1]<<8) | pCanMsg->Data[0];
tCAN->IF[0].DAT_A2 = ((uint16_t)pCanMsg->Data[3]<<8) | pCanMsg->Data[2];
tCAN->IF[0].DAT_B1 = ((uint16_t)pCanMsg->Data[5]<<8) | pCanMsg->Data[4];
tCAN->IF[0].DAT_B2 = ((uint16_t)pCanMsg->Data[7]<<8) | pCanMsg->Data[6];
/* request transmission*/
tCAN->IF[0].CREQ &= (~CAN_IF_CREQ_BUSY_Msk);
if(tCAN->IF[0].CREQ & CAN_IF_CREQ_BUSY_Msk) {
DEBUG_PRINTF("Cannot clear busy for sending ...\n");
return FALSE;
}
tCAN->IF[0].CREQ |= CAN_IF_CREQ_BUSY_Msk; // sending
for ( i=0; i<0xFFFFF; i++) {
if((tCAN->IF[0].CREQ & CAN_IF_CREQ_BUSY_Msk) == 0) break;
}
if ( i >= 0xFFFFF ) {
DEBUG_PRINTF("Cannot send out...\n");
return FALSE;
}
return TRUE;
}
/**
* @brief Get a message information in BASIC mode.
*
* @param[in] tCAN The base address of can module.
* @param[out] pCanMsg Pointer to the message structure where received data is copied.
*
* @return FALSE No any message received. \n
* TRUE Receive a message success.
*
*/
int32_t CAN_BasicReceiveMsg(CAN_T *tCAN, STR_CANMSG_T* pCanMsg)
{
if((tCAN->IF[1].MCON & CAN_IF_MCON_NEWDAT_Msk) == 0) { /* In basic mode, receive data always save in IF2 */
return FALSE;
}
tCAN->STATUS &= (~CAN_STATUS_RXOK_Msk);
tCAN->IF[1].CMASK = CAN_IF_CMASK_ARB_Msk
| CAN_IF_CMASK_CONTROL_Msk
| CAN_IF_CMASK_DATAA_Msk
| CAN_IF_CMASK_DATAB_Msk;
if((tCAN->IF[1].ARB2 & CAN_IF_ARB2_XTD_Msk) == 0) {
/* standard ID*/
pCanMsg->IdType = CAN_STD_ID;
pCanMsg->Id = (tCAN->IF[1].ARB2 >> 2) & 0x07FF;
} else {
/* extended ID*/
pCanMsg->IdType = CAN_EXT_ID;
pCanMsg->Id = (tCAN->IF[1].ARB2 & 0x1FFF)<<16;
pCanMsg->Id |= (uint32_t)tCAN->IF[1].ARB1;
}
pCanMsg->FrameType = !((tCAN->IF[1].ARB2 & CAN_IF_ARB2_DIR_Msk) >> CAN_IF_ARB2_DIR_Pos);
pCanMsg->DLC = tCAN->IF[1].MCON & CAN_IF_MCON_DLC_Msk;
pCanMsg->Data[0] = tCAN->IF[1].DAT_A1 & CAN_IF_DAT_A1_DATA0_Msk;
pCanMsg->Data[1] = (tCAN->IF[1].DAT_A1 & CAN_IF_DAT_A1_DATA1_Msk) >> CAN_IF_DAT_A1_DATA1_Pos;
pCanMsg->Data[2] = tCAN->IF[1].DAT_A2 & CAN_IF_DAT_A2_DATA2_Msk;
pCanMsg->Data[3] = (tCAN->IF[1].DAT_A2 & CAN_IF_DAT_A2_DATA3_Msk) >> CAN_IF_DAT_A2_DATA3_Pos;
pCanMsg->Data[4] = tCAN->IF[1].DAT_B1 & CAN_IF_DAT_B1_DATA4_Msk;
pCanMsg->Data[5] = (tCAN->IF[1].DAT_B1 & CAN_IF_DAT_B1_DATA5_Msk) >> CAN_IF_DAT_B1_DATA5_Pos;
pCanMsg->Data[6] = tCAN->IF[1].DAT_B2 & CAN_IF_DAT_B2_DATA6_Msk;
pCanMsg->Data[7] = (tCAN->IF[1].DAT_B2 & CAN_IF_DAT_B2_DATA7_Msk) >> CAN_IF_DAT_B2_DATA7_Pos;
return TRUE;
}
/**
* @brief Set Rx message object
* @param[in] tCAN The base address of can module.
* @param[in] u8MsgObj Specifies the Message object number, from 0 to 31.
* @param[in] u8idType Specifies the identifier type of the frames that will be transmitted
* This parameter can be one of the following values:
* CAN_STD_ID (standard ID, 11-bit)
* CAN_EXT_ID (extended ID, 29-bit)
* @param[in] u32id Specifies the identifier used for acceptance filtering.
* @param[in] u8singleOrFifoLast Specifies the end-of-buffer indicator.
* This parameter can be one of the following values:
* TRUE: for a single receive object or a FIFO receive object that is the last one of the FIFO.
* FALSE: for a FIFO receive object that is not the last one.
* @retval TRUE SUCCESS
* @retval FALSE No useful interface
* @details The function is used to configure a receive message object.
*/
int32_t CAN_SetRxMsgObj(CAN_T *tCAN, uint8_t u8MsgObj, uint8_t u8idType, uint32_t u32id, uint8_t u8singleOrFifoLast)
{
uint8_t u8MsgIfNum=0;
if ((u8MsgIfNum = GetFreeIF(tCAN)) == 2) { /* Check Free Interface for configure */
return FALSE;
}
/* Command Setting */
tCAN->IF[u8MsgIfNum].CMASK = CAN_IF_CMASK_WRRD_Msk | CAN_IF_CMASK_MASK_Msk | CAN_IF_CMASK_ARB_Msk |
CAN_IF_CMASK_CONTROL_Msk | CAN_IF_CMASK_DATAA_Msk | CAN_IF_CMASK_DATAB_Msk;
if (u8idType == CAN_STD_ID) { /* According STD/EXT ID format,Configure Mask and Arbitration register */
tCAN->IF[u8MsgIfNum].ARB1 = 0;
tCAN->IF[u8MsgIfNum].ARB2 = CAN_IF_ARB2_MSGVAL_Msk | (u32id & 0x7FF)<< 2;
} else {
tCAN->IF[u8MsgIfNum].ARB1 = u32id & 0xFFFF;
tCAN->IF[u8MsgIfNum].ARB2 = CAN_IF_ARB2_MSGVAL_Msk | CAN_IF_ARB2_XTD_Msk | (u32id & 0x1FFF0000)>>16;
}
tCAN->IF[u8MsgIfNum].MCON |= CAN_IF_MCON_UMASK_Msk | CAN_IF_MCON_RXIE_Msk;
if(u8singleOrFifoLast)
tCAN->IF[u8MsgIfNum].MCON |= CAN_IF_MCON_EOB_Msk;
else
tCAN->IF[u8MsgIfNum].MCON &= (~CAN_IF_MCON_EOB_Msk);
tCAN->IF[u8MsgIfNum].DAT_A1 = 0;
tCAN->IF[u8MsgIfNum].DAT_A2 = 0;
tCAN->IF[u8MsgIfNum].DAT_B1 = 0;
tCAN->IF[u8MsgIfNum].DAT_B2 = 0;
tCAN->IF[u8MsgIfNum].CREQ = 1 + u8MsgObj;
return TRUE;
}
/**
* @brief Gets the message
* @param[in] tCAN The base address of can module.
* @param[in] u8MsgObj Specifies the Message object number, from 0 to 31.
* @param[in] u8Release Specifies the message release indicator.
* This parameter can be one of the following values:
* TRUE: the message object is released when getting the data.
* FALSE:the message object is not released.
* @param[out] pCanMsg Pointer to the message structure where received data is copied.
* @retval TRUE Success
* @retval FALSE No any message received
* @details Gets the message, if received.
*/
int32_t CAN_ReadMsgObj(CAN_T *tCAN, uint8_t u8MsgObj, uint8_t u8Release, STR_CANMSG_T* pCanMsg)
{
if (!CAN_IsNewDataReceived(tCAN, u8MsgObj)) {
return FALSE;
}
tCAN->STATUS &= (~CAN_STATUS_RXOK_Msk);
/* read the message contents*/
tCAN->IF[1].CMASK = CAN_IF_CMASK_MASK_Msk
| CAN_IF_CMASK_ARB_Msk
| CAN_IF_CMASK_CONTROL_Msk
| CAN_IF_CMASK_CLRINTPND_Msk
| (u8Release ? CAN_IF_CMASK_TXRQSTNEWDAT_Msk : 0)
| CAN_IF_CMASK_DATAA_Msk
| CAN_IF_CMASK_DATAB_Msk;
tCAN->IF[1].CREQ = 1 + u8MsgObj;
while (tCAN->IF[1].CREQ & CAN_IF_CREQ_BUSY_Msk) {
/*Wait*/
}
if ((tCAN->IF[1].ARB2 & CAN_IF_ARB2_XTD_Msk) == 0) {
/* standard ID*/
pCanMsg->IdType = CAN_STD_ID;
pCanMsg->Id = (tCAN->IF[1].ARB2 & CAN_IF_ARB2_ID_Msk) >> 2;
} else {
/* extended ID*/
pCanMsg->IdType = CAN_EXT_ID;
pCanMsg->Id = (((tCAN->IF[1].ARB2) & 0x1FFF)<<16) | tCAN->IF[1].ARB1;
}
pCanMsg->DLC = tCAN->IF[1].MCON & CAN_IF_MCON_DLC_Msk;
pCanMsg->Data[0] = tCAN->IF[1].DAT_A1 & CAN_IF_DAT_A1_DATA0_Msk;
pCanMsg->Data[1] = (tCAN->IF[1].DAT_A1 & CAN_IF_DAT_A1_DATA1_Msk) >> CAN_IF_DAT_A1_DATA1_Pos;
pCanMsg->Data[2] = tCAN->IF[1].DAT_A2 & CAN_IF_DAT_A2_DATA2_Msk;
pCanMsg->Data[3] = (tCAN->IF[1].DAT_A2 & CAN_IF_DAT_A2_DATA3_Msk) >> CAN_IF_DAT_A2_DATA3_Pos;
pCanMsg->Data[4] = tCAN->IF[1].DAT_B1 & CAN_IF_DAT_B1_DATA4_Msk;
pCanMsg->Data[5] = (tCAN->IF[1].DAT_B1 & CAN_IF_DAT_B1_DATA5_Msk) >> CAN_IF_DAT_B1_DATA5_Pos;
pCanMsg->Data[6] = tCAN->IF[1].DAT_B2 & CAN_IF_DAT_B2_DATA6_Msk;
pCanMsg->Data[7] = (tCAN->IF[1].DAT_B2 & CAN_IF_DAT_B2_DATA7_Msk) >> CAN_IF_DAT_B2_DATA7_Pos;
return TRUE;
}
/// @endcond HIDDEN_SYMBOLS
/**
* @brief The function is used to set bus timing parameter according current clock and target baud-rate.
*
* @param[in] tCAN The base address of can module
* @param[in] u32BaudRate The target CAN baud-rate. The range of u32BaudRate is 1~1000KHz
*
* @return u32CurrentBitRate Real baud-rate value
*/
uint32_t CAN_SetBaudRate(CAN_T *tCAN, uint32_t u32BaudRate)
{
uint8_t u8Tseg1,u8Tseg2;
uint32_t u32Brp;
uint32_t u32Value;
CAN_EnterInitMode(tCAN);
SystemCoreClockUpdate();
#if 0 // original implementation got 5% inaccuracy.
u32Value = SystemCoreClock;
if(u32BaudRate * 8 < (u32Value/2)) {
u8Tseg1 = 2;
u8Tseg2 = 3;
} else {
u8Tseg1 = 2;
u8Tseg2 = 1;
}
#else
u32Value = SystemCoreClock / u32BaudRate;
/* Fix for most standard baud rates, include 125K */
u8Tseg1 = 3;
u8Tseg2 = 2;
while(1)
{
if(((u32Value % (u8Tseg1 + u8Tseg2 + 3)) == 0) | (u8Tseg1 >= 15))
break;
u8Tseg1++;
if((u32Value % (u8Tseg1 + u8Tseg2 + 3)) == 0)
break;
if(u8Tseg2 < 7)
u8Tseg2++;
}
#endif
u32Brp = SystemCoreClock/(u32BaudRate) / (u8Tseg1 + u8Tseg2 + 3) -1;
u32Value = ((uint32_t)u8Tseg2 << CAN_BTIME_TSEG2_Pos) | ((uint32_t)u8Tseg1 << CAN_BTIME_TSEG1_Pos) |
(u32Brp & CAN_BTIME_BRP_Msk) | (tCAN->BTIME & CAN_BTIME_SJW_Msk);
tCAN->BTIME = u32Value;
tCAN->BRPE = (u32Brp >> 6) & 0x0F;
CAN_LeaveInitMode(tCAN);
return (CAN_GetCANBitRate(tCAN));
}
/**
* @brief The function is used to disable all CAN interrupt.
*
* @param[in] tCAN The base address of can module
*
* @return None
*/
void CAN_Close(CAN_T *tCAN)
{
CAN_DisableInt(tCAN, (CAN_CON_IE_Msk|CAN_CON_SIE_Msk|CAN_CON_EIE_Msk));
}
/**
* @brief The function is sets bus timing parameter according current clock and target baud-rate. And set CAN operation mode.
*
* @param[in] tCAN The base address of can module
* @param[in] u32BaudRate The target CAN baud-rate. The range of u32BaudRate is 1~1000KHz
* @param[in] u32Mode The CAN operation mode. ( \ref CAN_NORMAL_MODE / \ref CAN_BASIC_MODE)
*
* @return u32CurrentBitRate Real baud-rate value
*/
uint32_t CAN_Open(CAN_T *tCAN, uint32_t u32BaudRate, uint32_t u32Mode)
{
uint32_t u32CurrentBitRate;
u32CurrentBitRate = CAN_SetBaudRate(tCAN, u32BaudRate);
if(u32Mode == CAN_BASIC_MODE)
CAN_EnterTestMode(tCAN, CAN_TEST_BASIC_Msk);
return u32CurrentBitRate;
}
/**
* @brief The function is used to configure a transmit object.
*
* @param[in] tCAN The base address of can module.
* @param[in] u32MsgNum Specifies the Message object number, from 0 to 31
* @param[in] pCanMsg Pointer to the message structure where received data is copied.
*
* @return FALSE: No useful interface. \n
* TRUE : Config message object success.
*
*/
int32_t CAN_SetTxMsg(CAN_T *tCAN, uint32_t u32MsgNum , STR_CANMSG_T* pCanMsg)
{
uint8_t u8MsgIfNum=0;
uint32_t i=0;
while((u8MsgIfNum = GetFreeIF(tCAN)) == 2) {
i++;
if(i > 0x10000000)
return FALSE;
}
/* update the contents needed for transmission*/
tCAN->IF[u8MsgIfNum].CMASK = 0xF3; /*CAN_CMASK_WRRD_Msk | CAN_CMASK_MASK_Msk | CAN_CMASK_ARB_Msk
| CAN_CMASK_CONTROL_Msk | CAN_CMASK_DATAA_Msk | CAN_CMASK_DATAB_Msk ; */
if (pCanMsg->IdType == CAN_STD_ID) {
/* standard ID*/
tCAN->IF[u8MsgIfNum].ARB1 = 0;
tCAN->IF[u8MsgIfNum].ARB2 = (((pCanMsg->Id)&0x7FF)<<2) | CAN_IF_ARB2_DIR_Msk | CAN_IF_ARB2_MSGVAL_Msk;
} else {
/* extended ID*/
tCAN->IF[u8MsgIfNum].ARB1 = (pCanMsg->Id)&0xFFFF;
tCAN->IF[u8MsgIfNum].ARB2 = ((pCanMsg->Id)&0x1FFF0000)>>16 | CAN_IF_ARB2_DIR_Msk
| CAN_IF_ARB2_XTD_Msk | CAN_IF_ARB2_MSGVAL_Msk;
}
if(pCanMsg->FrameType)
tCAN->IF[u8MsgIfNum].ARB2 |= CAN_IF_ARB2_DIR_Msk;
else
tCAN->IF[u8MsgIfNum].ARB2 &= (~CAN_IF_ARB2_DIR_Msk);
tCAN->IF[u8MsgIfNum].DAT_A1 = ((uint16_t)pCanMsg->Data[1]<<8) | pCanMsg->Data[0];
tCAN->IF[u8MsgIfNum].DAT_A2 = ((uint16_t)pCanMsg->Data[3]<<8) | pCanMsg->Data[2];
tCAN->IF[u8MsgIfNum].DAT_B1 = ((uint16_t)pCanMsg->Data[5]<<8) | pCanMsg->Data[4];
tCAN->IF[u8MsgIfNum].DAT_B2 = ((uint16_t)pCanMsg->Data[7]<<8) | pCanMsg->Data[6];
tCAN->IF[u8MsgIfNum].MCON = CAN_IF_MCON_NEWDAT_Msk | pCanMsg->DLC |CAN_IF_MCON_TXIE_Msk | CAN_IF_MCON_EOB_Msk;
tCAN->IF[u8MsgIfNum].CREQ = 1 + u32MsgNum;
return TRUE;
}
/**
* @brief Set transmit request bit
*
* @param[in] tCAN The base address of can module.
* @param[in] u32MsgNum Specifies the Message object number, from 0 to 31.
*
* @return TRUE: Start transmit message.
*/
int32_t CAN_TriggerTxMsg(CAN_T *tCAN, uint32_t u32MsgNum)
{
STR_CANMSG_T rMsg;
CAN_ReadMsgObj(tCAN, u32MsgNum,TRUE, &rMsg);
tCAN->IF[0].CMASK = CAN_IF_CMASK_WRRD_Msk |CAN_IF_CMASK_TXRQSTNEWDAT_Msk;
tCAN->IF[0].CREQ = 1 + u32MsgNum;
return TRUE;
}
/**
* @brief Enable CAN interrupt
*
* @param[in] tCAN The base address of can module.
* @param[in] u32Mask Interrupt Mask. ( \ref CAN_CON_IE_Msk / \ref CAN_CON_SIE_Msk / \ref CAN_CON_EIE_Msk)
*
* @return None
*/
void CAN_EnableInt(CAN_T *tCAN, uint32_t u32Mask)
{
CAN_EnterInitMode(tCAN);
tCAN->CON = (tCAN->CON & 0xF1) | ((u32Mask & CAN_CON_IE_Msk )? CAN_CON_IE_Msk :0)
| ((u32Mask & CAN_CON_SIE_Msk )? CAN_CON_SIE_Msk:0)
| ((u32Mask & CAN_CON_EIE_Msk )? CAN_CON_EIE_Msk:0);
CAN_LeaveInitMode(tCAN);
}
/**
* @brief Disable CAN interrupt
*
* @param[in] tCAN The base address of can module.
* @param[in] u32Mask Interrupt Mask. ( \ref CAN_CON_IE_Msk / \ref CAN_CON_SIE_Msk / \ref CAN_CON_EIE_Msk)
*
* @return None
*/
void CAN_DisableInt(CAN_T *tCAN, uint32_t u32Mask)
{
CAN_EnterInitMode(tCAN);
tCAN->CON = tCAN->CON & ~(CAN_CON_IE_Msk | ((u32Mask & CAN_CON_SIE_Msk)?CAN_CON_SIE_Msk:0)
| ((u32Mask & CAN_CON_EIE_Msk)?CAN_CON_EIE_Msk:0));
CAN_LeaveInitMode(tCAN);
}
/**
* @brief The function is used to configure a receive message object
*
* @param[in] tCAN The base address of can module.
* @param[in] u32MsgNum Specifies the Message object number, from 0 to 31
* @param[in] u32IDType Specifies the identifier type of the frames that will be transmitted. ( \ref CAN_STD_ID / \ref CAN_EXT_ID)
* @param[in] u32ID Specifies the identifier used for acceptance filtering.
*
* @return FALSE: No useful interface \n
* TRUE : Configure a receive message object success.
*
*/
int32_t CAN_SetRxMsg(CAN_T *tCAN, uint32_t u32MsgNum , uint32_t u32IDType, uint32_t u32ID)
{
uint32_t u32TimeOutCount = 0;
while(CAN_SetRxMsgObj(tCAN, u32MsgNum, u32IDType, u32ID, TRUE) == FALSE) {
u32TimeOutCount++;
if(u32TimeOutCount >= 0x10000000) return FALSE;
}
return TRUE;
}
/**
* @brief The function is used to configure several receive message objects
*
* @param[in] tCAN The base address of can module.
* @param[in] u32MsgNum The starting MSG RAM number. (0 ~ 31)
* @param[in] u32MsgCount the number of MSG RAM of the FIFO.
* @param[in] u32IDType Specifies the identifier type of the frames that will be transmitted. ( \ref CAN_STD_ID / \ref CAN_EXT_ID)
* @param[in] u32ID Specifies the identifier used for acceptance filtering.
*
* @return FALSE: No useful interface \n
* TRUE : Configure receive message objects success.
*
*/
int32_t CAN_SetMultiRxMsg(CAN_T *tCAN, uint32_t u32MsgNum , uint32_t u32MsgCount, uint32_t u32IDType, uint32_t u32ID)
{
uint32_t i = 0;
uint32_t u32TimeOutCount;
uint32_t u32EOB_Flag = 0;
for(i= 1; i < u32MsgCount; i++) {
u32TimeOutCount = 0;
u32MsgNum += (i - 1);
if(i == u32MsgCount) u32EOB_Flag = 1;
while(CAN_SetRxMsgObj(tCAN, u32MsgNum, u32IDType, u32ID, u32EOB_Flag) == FALSE) {
u32TimeOutCount++;
if(u32TimeOutCount >= 0x10000000) return FALSE;
}
}
return TRUE;
}
/**
* @brief Send CAN message.
* @param[in] tCAN The base address of can module.
* @param[in] u32MsgNum Specifies the Message object number, from 0 to 31
* @param[in] pCanMsg Pointer to the message structure where received data is copied.
*
* @return FALSE: When operation in basic mode: Transmit message time out, or when operation in normal mode: No useful interface. \n
* TRUE : Transmit Message success.
*/
int32_t CAN_Transmit(CAN_T *tCAN, uint32_t u32MsgNum , STR_CANMSG_T* pCanMsg)
{
if((tCAN->CON & CAN_CON_TEST_Msk) && (tCAN->TEST & CAN_TEST_BASIC_Msk)) {
return (CAN_BasicSendMsg(tCAN, pCanMsg));
} else {
if(CAN_SetTxMsg(tCAN, u32MsgNum, pCanMsg) == FALSE)
return FALSE;
CAN_TriggerTxMsg(tCAN, u32MsgNum);
}
return TRUE;
}
/**
* @brief Gets the message, if received.
* @param[in] tCAN The base address of can module.
* @param[in] u32MsgNum Specifies the Message object number, from 0 to 31
* @param[out] pCanMsg Pointer to the message structure where received data is copied.
*
* @return FALSE: No any message received. \n
* TRUE : Receive Message success.
*/
int32_t CAN_Receive(CAN_T *tCAN, uint32_t u32MsgNum , STR_CANMSG_T* pCanMsg)
{
if((tCAN->CON & CAN_CON_TEST_Msk) && (tCAN->TEST & CAN_TEST_BASIC_Msk)) {
return (CAN_BasicReceiveMsg(tCAN, pCanMsg));
} else {
return CAN_ReadMsgObj(tCAN, u32MsgNum, TRUE, pCanMsg);
}
}
/**
* @brief Clear interrupt pending bit.
* @param[in] tCAN The base address of can module.
* @param[in] u32MsgNum Specifies the Message object number, from 0 to 31
*
* @return None
*
*/
void CAN_CLR_INT_PENDING_BIT(CAN_T *tCAN, uint8_t u32MsgNum)
{
uint32_t u32MsgIfNum = 0;
uint32_t u32IFBusyCount = 0;
while(u32IFBusyCount < 0x10000000) {
if((tCAN->IF[0].CREQ & CAN_IF_CREQ_BUSY_Msk) == 0) {
u32MsgIfNum = 0;
break;
} else if((tCAN->IF[1].CREQ & CAN_IF_CREQ_BUSY_Msk) == 0) {
u32MsgIfNum = 1;
break;
}
u32IFBusyCount++;
}
tCAN->IF[u32MsgIfNum].CMASK = CAN_IF_CMASK_CLRINTPND_Msk | CAN_IF_CMASK_TXRQSTNEWDAT_Msk;
tCAN->IF[u32MsgIfNum].CREQ = 1 + u32MsgNum;
}
/*@}*/ /* end of group NUC472_442_CAN_EXPORTED_FUNCTIONS */
/*@}*/ /* end of group NUC472_442_CAN_Driver */
/*@}*/ /* end of group NUC472_442_Device_Driver */
/*** (C) COPYRIGHT 2013 Nuvoton Technology Corp. ***/
Reference in New Issue View Git Blame Copy Permalink