mbed-os/TESTS/mbed_hal/qspi/flash_configs/flash_configs.h

93 lines
2.9 KiB
C

/* mbed Microcontroller Library
* Copyright (c) 2018-2018 ARM Limited
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef MBED_FLASH_CONFIGS_H
#define MBED_FLASH_CONFIGS_H
#if defined(TARGET_DISCO_L475VG_IOT01A)
#include "MX25RXX35F_config.h" // MX25R6435F
#elif defined(TARGET_DISCO_F413ZH)
#include "N25Q128A_config.h" // N25Q128A13EF840F
#elif defined(TARGET_DISCO_F746NG)
#include "N25Q128A_config.h" // N25Q128A13EF840E
#elif defined(TARGET_DISCO_F469NI)
#include "N25Q128A_config.h" // N25Q128A13EF840E
#elif defined(TARGET_DISCO_F769NI)
#include "MX25L51245G_config.h" // MX25L51245G
#elif defined(TARGET_DISCO_L4R9I)
#include "MX25LM51245G_config.h" // MX25LM51245G
#elif defined(TARGET_DISCO_L476VG)
#include "N25Q128A_config.h" // N25Q128A13EF840E
/* See STM32L476 Errata Sheet, it is not possible to use Dual-/Quad-mode for the command phase */
#undef QSPI_CMD_READ_DPI
#undef QSPI_CMD_READ_QPI
#undef QSPI_CMD_WRITE_DPI
#undef QSPI_CMD_WRITE_QPI
#elif defined(TARGET_RHOMBIO_L476DMW1K)
#include "MT25Q_config.h" // MT25QL128ABA1EW7
/* See STM32L476 Errata Sheet, it is not possible to use Dual-/Quad-mode for the command phase */
#undef QSPI_CMD_READ_DPI
#undef QSPI_CMD_READ_QPI
#undef QSPI_CMD_WRITE_DPI
#undef QSPI_CMD_WRITE_QPI
#elif defined(TARGET_DISCO_L496AG)
#include "MX25RXX35F_config.h" // MX25R6435F
#elif defined(TARGET_NRF52840)
#include "NORDIC/NRF52840_DK/flash_config.h"
#elif defined(TARGET_EFM32GG11_STK3701)
#include "SiliconLabs/EFM32GG11_STK3701/flash_config.h"
#elif defined(TARGET_K82F)
#include "NXP/K82F/flash_config.h"
#elif defined(TARGET_KL82Z)
#include "NXP/KL82Z/flash_config.h"
#elif defined(TARGET_LPC546XX)
#include "NXP/LPC546XX/flash_config.h"
#elif( defined(TARGET_CY8CKIT_062_BLE) || \
defined(TARGET_CY8CKIT_062_WIFI_BT) || \
defined(TARGET_CY8CKIT_062S2_43012) || \
defined(TARGET_CY8CKIT_062S2_4343W) || \
defined(TARGET_CY8CKIT_064S2_4343W) || \
defined(TARGET_CY8CPROTO_062_4343W) || \
defined(TARGET_CY8CPROTO_062S2_43012) || \
defined(TARGET_CY8CPROTO_062S3_4343W) || \
defined(TARGET_CYW943012P6EVB_01) || \
defined(TARGET_CYW9P62S1_43438EVB_01))
#include "S25FL512S_config.h"
#elif defined(TARGET_CYW9P62S1_43012EVB_01)
#include "S25FS128S_config.h"
#elif defined(TARGET_CY8CPROTO_064_SB)
#include "S25FL128S_config.h"
#endif
#endif // MBED_FLASH_CONFIGS_H