ARMmbed
/
mbed-os
mirror of https://github.com/ARMmbed/mbed-os.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
mbed-os/components/storage/blockdevice/COMPONENT_DATAFLASH/DataFlashBlockDevice.cpp

798 lines
24 KiB
C++
Raw Blame History

/* mbed Microcontroller Library
* Copyright (c) 2016 ARM Limited
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "DataFlashBlockDevice.h"
#include "mbed_critical.h"
#include <inttypes.h>
/* constants */
#define DATAFLASH_READ_SIZE 1
#define DATAFLASH_PROG_SIZE 1
#define DATAFLASH_TIMEOUT 10000
#define DATAFLASH_ID_MATCH 0x1F20
#define DATAFLASH_ID_DENSITY_MASK 0x001F
#define DATAFLASH_PAGE_SIZE_256 0x0100
#define DATAFLASH_PAGE_SIZE_264 0x0108
#define DATAFLASH_PAGE_SIZE_512 0x0200
#define DATAFLASH_PAGE_SIZE_528 0x0210
#define DATAFLASH_BLOCK_SIZE_2K 0x0800
#define DATAFLASH_BLOCK_SIZE_2K1 0x0840
#define DATAFLASH_BLOCK_SIZE_4K 0x1000
#define DATAFLASH_BLOCK_SIZE_4K1 0x1080
#define DATAFLASH_PAGE_BIT_264 9
#define DATAFLASH_PAGE_BIT_528 10
/* enable debug */
#ifndef DATAFLASH_DEBUG
#define DATAFLASH_DEBUG 0
#endif /* DATAFLASH_DEBUG */
#if DATAFLASH_DEBUG
#define DEBUG_PRINTF(...) printf(__VA_ARGS__)
#else
#define DEBUG_PRINTF(...)
#endif
void _print_status(uint16_t status);
/* non-exhaustive opcode list */
enum opcode {
DATAFLASH_OP_NOP = 0x00,
DATAFLASH_OP_STATUS = 0xD7,
DATAFLASH_OP_ID = 0x9F,
DATAFLASH_OP_READ_LOW_POWER = 0x01,
DATAFLASH_OP_READ_LOW_FREQUENCY = 0x03,
DATAFLASH_OP_PROGRAM_DIRECT = 0x02, // Program through Buffer 1 without Built-In Erase
DATAFLASH_OP_PROGRAM_DIRECT_WITH_ERASE = 0x82,
DATAFLASH_OP_ERASE_BLOCK = 0x50,
};
/* non-exhaustive command list */
enum command {
DATAFLASH_COMMAND_WRITE_DISABLE = 0x3D2A7FA9,
DATAFLASH_COMMAND_WRITE_ENABLE = 0x3D2A7F9A,
DATAFLASH_COMMAND_BINARY_PAGE_SIZE = 0x3D2A80A6,
DATAFLASH_COMMAND_DATAFLASH_PAGE_SIZE = 0x3D2A80A7,
};
/* bit masks for interpreting the status register */
enum status_bit {
DATAFLASH_BIT_READY = (0x01 << 15),
DATAFLASH_BIT_COMPARE = (0x01 << 14),
DATAFLASH_BIT_DENSITY = (0x0F << 10),
DATAFLASH_BIT_PROTECT = (0x01 << 9),
DATAFLASH_BIT_PAGE_SIZE = (0x01 << 8),
DATAFLASH_BIT_ERASE_PROGRAM_ERROR = (0x01 << 5),
DATAFLASH_BIT_SECTOR_LOCKDOWN = (0x01 << 3),
DATAFLASH_BIT_PROGRAM_SUSPEND_2 = (0x01 << 2),
DATAFLASH_BIT_PROGRAM_SUSPEND_1 = (0x01 << 1),
DATAFLASH_BIT_ERASE_SUSPEND = (0x01 << 0),
};
/* bit masks for detecting density from status register */
enum status_density {
DATAFLASH_STATUS_DENSITY_2_MBIT = (0x05 << 10),
DATAFLASH_STATUS_DENSITY_4_MBIT = (0x07 << 10),
DATAFLASH_STATUS_DENSITY_8_MBIT = (0x09 << 10),
DATAFLASH_STATUS_DENSITY_16_MBIT = (0x0B << 10),
DATAFLASH_STATUS_DENSITY_32_MBIT = (0x0D << 10),
DATAFLASH_STATUS_DENSITY_64_MBIT = (0x0F << 10),
};
/* code for calculating density */
enum id_density {
DATAFLASH_ID_DENSITY_2_MBIT = 0x03,
DATAFLASH_ID_DENSITY_4_MBIT = 0x04,
DATAFLASH_ID_DENSITY_8_MBIT = 0x05,
DATAFLASH_ID_DENSITY_16_MBIT = 0x06,
DATAFLASH_ID_DENSITY_32_MBIT = 0x07,
DATAFLASH_ID_DENSITY_64_MBIT = 0x08,
};
/* typical duration in milliseconds for each operation */
enum timing {
DATAFLASH_TIMING_ERASE_PROGRAM_PAGE = 17,
DATAFLASH_TIMING_PROGRAM_PAGE = 3,
DATAFLASH_TIMING_ERASE_PAGE = 12,
DATAFLASH_TIMING_ERASE_BLOCK = 45,
DATAFLASH_TIMING_ERASE_SECTOR = 700,
DATAFLASH_TIMING_ERASE_CHIP = 45000
};
/* frequency domains */
enum frequency {
DATAFLASH_LOW_POWER_FREQUENCY = 15000000,
DATAFLASH_LOW_FREQUENCY = 50000000,
DATAFLASH_HIGH_FREQUENCY = 85000000,
DATAFLASH_HIGHEST_FREQUENCY = 104000000
};
/* number of dummy bytes required in each frequency domain */
enum dummy {
DATAFLASH_LOW_POWER_BYTES = 0,
DATAFLASH_LOW_FREQUENCY_BYTES = 0,
DATAFLASH_HIGH_FREQUENCY_BYTES = 1,
DATAFLASH_HIGHEST_FREQUENCY_BYTES = 2
};
DataFlashBlockDevice::DataFlashBlockDevice(PinName mosi,
PinName miso,
PinName sclk,
PinName cs,
int freq,
PinName nwp)
: _spi(mosi, miso, sclk),
_cs(cs, 1),
_nwp(nwp),
_device_size(0),
_page_size(0),
_block_size(0),
_is_initialized(0),
_init_ref_count(0)
{
/* check that frequency is within range */
if (freq > DATAFLASH_LOW_FREQUENCY) {
/* cap frequency at the highest supported one */
_spi.frequency(DATAFLASH_LOW_FREQUENCY);
} else {
/* freqency is valid, use as-is */
_spi.frequency(freq);
}
/* write protect chip if pin is connected */
if (nwp != NC) {
_nwp = 0;
}
}
int DataFlashBlockDevice::init()
{
DEBUG_PRINTF("init\r\n");
if (!_is_initialized) {
_init_ref_count = 0;
}
uint32_t val = core_util_atomic_incr_u32(&_init_ref_count, 1);
if (val != 1) {
return BD_ERROR_OK;
}
int result = BD_ERROR_DEVICE_ERROR;
/* read ID register to validate model and set dimensions */
uint16_t id = _get_register(DATAFLASH_OP_ID);
DEBUG_PRINTF("id: %04X\r\n", id & DATAFLASH_ID_MATCH);
/* get status register to verify the page size mode */
uint16_t status = _get_register(DATAFLASH_OP_STATUS);
/* manufacture ID match */
if ((id & DATAFLASH_ID_MATCH) == DATAFLASH_ID_MATCH) {
/* calculate density */
_device_size = 0x8000 << (id & DATAFLASH_ID_DENSITY_MASK);
bool binary_page_size = true;
/* check if device is configured for binary page sizes */
if ((status & DATAFLASH_BIT_PAGE_SIZE) == DATAFLASH_BIT_PAGE_SIZE) {
DEBUG_PRINTF("Page size is binary\r\n");
#if MBED_CONF_DATAFLASH_DATAFLASH_SIZE
/* send reconfiguration command */
_write_command(DATAFLASH_COMMAND_DATAFLASH_PAGE_SIZE, NULL, 0);
/* wait for device to be ready and update return code */
result = _sync();
/* set binary flag */
binary_page_size = false;
#else
/* set binary flag */
binary_page_size = true;
#endif
} else {
DEBUG_PRINTF("Page size is not binary\r\n");
#if MBED_CONF_DATAFLASH_BINARY_SIZE
/* send reconfiguration command */
_write_command(DATAFLASH_COMMAND_BINARY_PAGE_SIZE, NULL, 0);
/* wait for device to be ready and update return code */
result = _sync();
/* set binary flag */
binary_page_size = true;
#else
/* set binary flag */
binary_page_size = false;
#endif
}
/* set page program size and block erase size */
switch (id & DATAFLASH_ID_DENSITY_MASK) {
case DATAFLASH_ID_DENSITY_2_MBIT:
case DATAFLASH_ID_DENSITY_4_MBIT:
case DATAFLASH_ID_DENSITY_8_MBIT:
case DATAFLASH_ID_DENSITY_64_MBIT:
if (binary_page_size) {
_page_size = DATAFLASH_PAGE_SIZE_256;
_block_size = DATAFLASH_BLOCK_SIZE_2K;
} else {
_page_size = DATAFLASH_PAGE_SIZE_264;
_block_size = DATAFLASH_BLOCK_SIZE_2K1;
/* adjust device size */
_device_size = (_device_size / DATAFLASH_PAGE_SIZE_256) *
DATAFLASH_PAGE_SIZE_264;
}
break;
case DATAFLASH_ID_DENSITY_16_MBIT:
case DATAFLASH_ID_DENSITY_32_MBIT:
if (binary_page_size) {
_page_size = DATAFLASH_PAGE_SIZE_512;
_block_size = DATAFLASH_BLOCK_SIZE_4K;
} else {
_page_size = DATAFLASH_PAGE_SIZE_528;
_block_size = DATAFLASH_BLOCK_SIZE_4K1;
/* adjust device size */
_device_size = (_device_size / DATAFLASH_PAGE_SIZE_512) *
DATAFLASH_PAGE_SIZE_528;
}
break;
default:
break;
}
DEBUG_PRINTF("density: %" PRIu16 "\r\n", id & DATAFLASH_ID_DENSITY_MASK);
DEBUG_PRINTF("size: %" PRIu32 "\r\n", _device_size);
DEBUG_PRINTF("page: %" PRIu16 "\r\n", _page_size);
DEBUG_PRINTF("block: %" PRIu16 "\r\n", _block_size);
/* device successfully detected, set OK error code */
result = BD_ERROR_OK;
}
/* write protect device when idle */
_write_enable(false);
if (result == BD_ERROR_OK) {
_is_initialized = true;
}
return result;
}
int DataFlashBlockDevice::deinit()
{
DEBUG_PRINTF("deinit\r\n");
if (!_is_initialized) {
_init_ref_count = 0;
return BD_ERROR_OK;
}
uint32_t val = core_util_atomic_decr_u32(&_init_ref_count, 1);
if (val) {
return BD_ERROR_OK;
}
_is_initialized = false;
return BD_ERROR_OK;
}
int DataFlashBlockDevice::read(void *buffer, bd_addr_t addr, bd_size_t size)
{
DEBUG_PRINTF("read: %p %" PRIX64 " %" PRIX64 "\r\n", buffer, addr, size);
if (!_is_initialized) {
return BD_ERROR_DEVICE_ERROR;
}
int result = BD_ERROR_DEVICE_ERROR;
/* check parameters are valid and the read is within bounds */
if (is_valid_read(addr, size) && buffer) {
uint8_t *external_buffer = static_cast<uint8_t *>(buffer);
/* activate device */
_cs = 0;
/* send read opcode */
_spi.write(DATAFLASH_OP_READ_LOW_FREQUENCY);
/* translate address */
uint32_t address = _translate_address(addr);
DEBUG_PRINTF("address: %" PRIX32 "\r\n", address);
/* send read address */
_spi.write((address >> 16) & 0xFF);
_spi.write((address >> 8) & 0xFF);
_spi.write(address & 0xFF);
/* clock out one byte at a time and store in external buffer */
for (uint32_t index = 0; index < size; index++) {
external_buffer[index] = _spi.write(DATAFLASH_OP_NOP);
}
/* deactivate device */
_cs = 1;
result = BD_ERROR_OK;
}
return result;
}
int DataFlashBlockDevice::program(const void *buffer, bd_addr_t addr, bd_size_t size)
{
DEBUG_PRINTF("program: %p %" PRIX64 " %" PRIX64 "\r\n", buffer, addr, size);
if (!_is_initialized) {
return BD_ERROR_DEVICE_ERROR;
}
int result = BD_ERROR_DEVICE_ERROR;
/* check parameters are valid and the write is within bounds */
if (is_valid_program(addr, size) && buffer) {
const uint8_t *external_buffer = static_cast<const uint8_t *>(buffer);
/* Each write command can only cover one page at a time.
Find page and current page offset for handling unaligned writes.
*/
uint32_t page_number = addr / _page_size;
uint32_t page_offset = addr % _page_size;
/* disable write protection */
_write_enable(true);
/* continue until all bytes have been written */
uint32_t bytes_written = 0;
while (bytes_written < size) {
/* find remaining bytes to be written */
uint32_t bytes_remaining = size - bytes_written;
/* cap the value at the page size and offset */
if (bytes_remaining > (_page_size - page_offset)) {
bytes_remaining = _page_size - page_offset;
}
/* Write one page, bytes_written keeps track of the progress,
page_number is the page address, and page_offset is non-zero for
unaligned writes.
*/
result = _write_page(&external_buffer[bytes_written],
page_number,
page_offset,
bytes_remaining);
/* update loop variables upon success otherwise break loop */
if (result == BD_ERROR_OK) {
bytes_written += bytes_remaining;
page_number++;
/* After the first successful write,
all subsequent writes will be aligned.
*/
page_offset = 0;
} else {
break;
}
}
/* enable write protection */
_write_enable(false);
}
return result;
}
int DataFlashBlockDevice::erase(bd_addr_t addr, bd_size_t size)
{
DEBUG_PRINTF("erase: %" PRIX64 " %" PRIX64 "\r\n", addr, size);
if (!_is_initialized) {
return BD_ERROR_DEVICE_ERROR;
}
int result = BD_ERROR_DEVICE_ERROR;
/* check parameters are valid and the erase is within bounds */
if (is_valid_erase(addr, size)) {
/* disable write protection */
_write_enable(true);
/* erase one block at a time until the full size has been erased */
uint32_t erased = 0;
while (erased < size) {
/* set block erase opcode */
uint32_t command = DATAFLASH_OP_ERASE_BLOCK;
/* translate address */
uint32_t address = _translate_address(addr);
/* set block address */
command = (command << 8) | ((address >> 16) & 0xFF);
command = (command << 8) | ((address >> 8) & 0xFF);
command = (command << 8) | (address & 0xFF);
/* send command to device */
_write_command(command, NULL, 0);
/* wait until device is ready and update return value */
result = _sync();
/* if erase failed, break loop */
if (result != BD_ERROR_OK) {
break;
}
/* update loop variables */
addr += _block_size;
erased += _block_size;
}
/* enable write protection */
_write_enable(false);
}
return result;
}
bd_size_t DataFlashBlockDevice::get_read_size() const
{
DEBUG_PRINTF("read size: %d\r\n", DATAFLASH_READ_SIZE);
return DATAFLASH_READ_SIZE;
}
bd_size_t DataFlashBlockDevice::get_program_size() const
{
DEBUG_PRINTF("program size: %d\r\n", DATAFLASH_PROG_SIZE);
return DATAFLASH_PROG_SIZE;
}
bd_size_t DataFlashBlockDevice::get_erase_size() const
{
DEBUG_PRINTF("erase size: %" PRIX16 "\r\n", _block_size);
return _block_size;
}
bd_size_t DataFlashBlockDevice::get_erase_size(bd_addr_t addr) const
{
DEBUG_PRINTF("erase size: %" PRIX16 "\r\n", _block_size);
return _block_size;
}
bd_size_t DataFlashBlockDevice::size() const
{
DEBUG_PRINTF("device size: %" PRIX32 "\r\n", _device_size);
return _device_size;
}
/**
* @brief Function for reading a specific register.
* @details Used for reading either the Status Register or Manufacture and ID Register.
*
* @param opcode Register to be read.
* @return value.
*/
uint16_t DataFlashBlockDevice::_get_register(uint8_t opcode)
{
DEBUG_PRINTF("_get_register: %" PRIX8 "\r\n", opcode);
/* activate device */
_cs = 0;
/* write opcode */
_spi.write(opcode);
/* read and store result */
int status = (_spi.write(DATAFLASH_OP_NOP));
status = (status << 8) | (_spi.write(DATAFLASH_OP_NOP));
/* deactivate device */
_cs = 1;
return status;
}
/**
* @brief Function for sending command and data to device.
* @details The command can be an opcode with address and data or
* a 4 byte command without data.
*
* The supported frequencies and the opcode used do not
* require dummy bytes to be sent after command.
*
* @param command Opcode with address or 4 byte command.
* @param buffer Data to be sent after command.
* @param size Size of buffer.
*/
void DataFlashBlockDevice::_write_command(uint32_t command, const uint8_t *buffer, uint32_t size)
{
DEBUG_PRINTF("_write_command: %" PRIX32 " %p %" PRIX32 "\r\n", command, buffer, size);
/* activate device */
_cs = 0;
/* send command (opcode with data or 4 byte command) */
_spi.write((command >> 24) & 0xFF);
_spi.write((command >> 16) & 0xFF);
_spi.write((command >> 8) & 0xFF);
_spi.write(command & 0xFF);
/* send optional data */
if (buffer && size) {
for (uint32_t index = 0; index < size; index++) {
_spi.write(buffer[index]);
}
}
/* deactivate device */
_cs = 1;
}
/**
* @brief Enable and disable write protection.
*
* @param enable Boolean for enabling or disabling write protection.
*/
void DataFlashBlockDevice::_write_enable(bool enable)
{
DEBUG_PRINTF("_write_enable: %d\r\n", enable);
/* enable writing, disable write protection */
if (enable) {
/* if not-write-protected pin is connected, select it */
if (_nwp.is_connected()) {
_nwp = 1;
}
/* send 4 byte command enabling writes */
_write_command(DATAFLASH_COMMAND_WRITE_ENABLE, NULL, 0);
} else {
/* if not-write-protected pin is connected, deselect it */
if (_nwp.is_connected()) {
_nwp = 0;
}
/* send 4 byte command disabling writes */
_write_command(DATAFLASH_COMMAND_WRITE_DISABLE, NULL, 0);
}
}
/**
* @brief Sleep and poll status register until device is ready for next command.
*
* @return BlockDevice compatible error code.
*/
int DataFlashBlockDevice::_sync(void)
{
DEBUG_PRINTF("_sync\r\n");
/* default return value if operation times out */
int result = BD_ERROR_DEVICE_ERROR;
/* Poll device until a hard coded timeout is reached.
The polling interval is based on the typical page program time.
*/
for (uint32_t timeout = 0;
timeout < DATAFLASH_TIMEOUT;
timeout += DATAFLASH_TIMING_ERASE_PROGRAM_PAGE) {
/* get status register */
uint16_t status = _get_register(DATAFLASH_OP_STATUS);
/* erase/program bit set, exit with error code set */
if (status & DATAFLASH_BIT_ERASE_PROGRAM_ERROR) {
DEBUG_PRINTF("DATAFLASH_BIT_ERASE_PROGRAM_ERROR\r\n");
break;
/* device ready, set OK code set */
} else if (status & DATAFLASH_BIT_READY) {
DEBUG_PRINTF("DATAFLASH_BIT_READY\r\n");
result = BD_ERROR_OK;
break;
/* wait the typical write period before trying again */
} else {
DEBUG_PRINTF("wait_ms: %d\r\n", DATAFLASH_TIMING_ERASE_PROGRAM_PAGE);
wait_ms(DATAFLASH_TIMING_ERASE_PROGRAM_PAGE);
}
}
return result;
}
/**
* @brief Write single page.
* @details Address can be unaligned.
*
* @param buffer Data to write.
* @param addr Address to write from.
* @param size Bytes to write. Can at most be the full page.
* @return BlockDevice error code.
*/
int DataFlashBlockDevice::_write_page(const uint8_t *buffer,
uint32_t page,
uint32_t offset,
uint32_t size)
{
DEBUG_PRINTF("_write_page: %p %" PRIX32 " %" PRIX32 "\r\n", buffer, page, size);
uint32_t command = DATAFLASH_OP_NOP;
/* opcode for writing directly to device, in a single command,
assuming the page has been erased before hand.
*/
command = DATAFLASH_OP_PROGRAM_DIRECT;
uint32_t address = 0;
/* convert page number and offset into device address based on address format */
if (_page_size == DATAFLASH_PAGE_SIZE_264) {
address = (page << DATAFLASH_PAGE_BIT_264) | offset;
} else if (_page_size == DATAFLASH_PAGE_SIZE_528) {
address = (page << DATAFLASH_PAGE_BIT_528) | offset;
} else {
address = (page * _page_size) | offset;
}
/* set write address */
command = (command << 8) | ((address >> 16) & 0xFF);
command = (command << 8) | ((address >> 8) & 0xFF);
command = (command << 8) | (address & 0xFF);
/* send write command with data */
_write_command(command, buffer, size);
/* wait until device is ready before continuing */
int result = _sync();
return result;
}
/**
* @brief Translate address.
* @details If the device is configured for non-binary page sizes,
* the address is translated from binary to non-binary form.
*
* @param addr Binary address.
* @return Address in format expected by device.
*/
uint32_t DataFlashBlockDevice::_translate_address(bd_addr_t addr)
{
uint32_t address = addr;
/* translate address if page size is non-binary */
if (_page_size == DATAFLASH_PAGE_SIZE_264) {
address = ((addr / DATAFLASH_PAGE_SIZE_264) << DATAFLASH_PAGE_BIT_264) |
(addr % DATAFLASH_PAGE_SIZE_264);
} else if (_page_size == DATAFLASH_PAGE_SIZE_528) {
address = ((addr / DATAFLASH_PAGE_SIZE_528) << DATAFLASH_PAGE_BIT_528) |
(addr % DATAFLASH_PAGE_SIZE_528);
}
return address;
}
/**
* @brief Internal function for printing out each bit set in status register.
*
* @param status Status register.
*/
void _print_status(uint16_t status)
{
#if DATAFLASH_DEBUG
DEBUG_PRINTF("%04X\r\n", status);
/* device is ready (after write/erase) */
if (status & DATAFLASH_BIT_READY) {
DEBUG_PRINTF("DATAFLASH_BIT_READY\r\n");
}
/* Buffer comparison failed */
if (status & DATAFLASH_BIT_COMPARE) {
DEBUG_PRINTF("DATAFLASH_BIT_COMPARE\r\n");
}
/* device size is 2 MB */
if (status & DATAFLASH_STATUS_DENSITY_2_MBIT) {
DEBUG_PRINTF("DATAFLASH_STATUS_DENSITY_2_MBIT\r\n");
}
/* device size is 4 MB */
if (status & DATAFLASH_STATUS_DENSITY_4_MBIT) {
DEBUG_PRINTF("DATAFLASH_STATUS_DENSITY_4_MBIT\r\n");
}
/* device size is 8 MB */
if (status & DATAFLASH_STATUS_DENSITY_8_MBIT) {
DEBUG_PRINTF("DATAFLASH_STATUS_DENSITY_8_MBIT\r\n");
}
/* device size is 16 MB */
if (status & DATAFLASH_STATUS_DENSITY_16_MBIT) {
DEBUG_PRINTF("DATAFLASH_STATUS_DENSITY_16_MBIT\r\n");
}
/* device size is 32 MB */
if (status & DATAFLASH_STATUS_DENSITY_32_MBIT) {
DEBUG_PRINTF("DATAFLASH_STATUS_DENSITY_32_MBIT\r\n");
}
/* device size is 64 MB */
if (status & DATAFLASH_STATUS_DENSITY_64_MBIT) {
DEBUG_PRINTF("DATAFLASH_STATUS_DENSITY_64_MBIT\r\n");
}
/* sector protectino enabled */
if (status & DATAFLASH_BIT_PROTECT) {
DEBUG_PRINTF("DATAFLASH_BIT_PROTECT\r\n");
}
/* page size is a power of 2 */
if (status & DATAFLASH_BIT_PAGE_SIZE) {
DEBUG_PRINTF("DATAFLASH_BIT_PAGE_SIZE\r\n");
}
/* erase/program error */
if (status & DATAFLASH_BIT_ERASE_PROGRAM_ERROR) {
DEBUG_PRINTF("DATAFLASH_BIT_ERASE_PROGRAM_ERROR\r\n");
}
/* sector lockdown still possible */
if (status & DATAFLASH_BIT_SECTOR_LOCKDOWN) {
DEBUG_PRINTF("DATAFLASH_BIT_SECTOR_LOCKDOWN\r\n");
}
/* program operation suspended while using buffer 2 */
if (status & DATAFLASH_BIT_PROGRAM_SUSPEND_2) {
DEBUG_PRINTF("DATAFLASH_BIT_PROGRAM_SUSPEND_2\r\n");
}
/* program operation suspended while using buffer 1 */
if (status & DATAFLASH_BIT_PROGRAM_SUSPEND_1) {
DEBUG_PRINTF("DATAFLASH_BIT_PROGRAM_SUSPEND_1\r\n");
}
/* erase has been suspended */
if (status & DATAFLASH_BIT_ERASE_SUSPEND) {
DEBUG_PRINTF("DATAFLASH_BIT_ERASE_SUSPEND\r\n");
}
#endif
}
Reference in New Issue View Git Blame Copy Permalink