mirror of https://github.com/ARMmbed/mbed-os.git
1090 lines
44 KiB
C
1090 lines
44 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32l1xx_hal_opamp.c
|
|
* @author MCD Application Team
|
|
* @version V1.2.0
|
|
* @date 01-July-2016
|
|
* @brief OPAMP HAL module driver.
|
|
* This file provides firmware functions to manage the following
|
|
* functionalities of the operational amplifier(s)(OPAMP1, OPAMP2 etc)
|
|
* peripheral:
|
|
* + OPAMP configuration
|
|
* + OPAMP calibration
|
|
* Thanks to
|
|
* + Initialization and de-initialization functions
|
|
* + IO operation functions
|
|
* + Peripheral Control functions
|
|
* + Peripheral State functions
|
|
*
|
|
@verbatim
|
|
================================================================================
|
|
##### OPAMP Peripheral Features #####
|
|
================================================================================
|
|
[..] The device integrates up to 3 operational amplifiers OPAMP1, OPAMP2,
|
|
OPAMP3 (OPAMP3 availability depends on device category)
|
|
|
|
(#) The OPAMP(s) provides several exclusive running modes.
|
|
(++) Standalone mode
|
|
(++) Follower mode
|
|
|
|
(#) All OPAMP (same for all OPAMPs) can operate in
|
|
(++) Either Low range (VDDA < 2.4V) power supply
|
|
(++) Or High range (VDDA > 2.4V) power supply
|
|
|
|
(#) Each OPAMP(s) can be configured in normal and low power mode.
|
|
|
|
(#) The OPAMP(s) provide(s) calibration capabilities.
|
|
(++) Calibration aims at correcting some offset for running mode.
|
|
(++) The OPAMP uses either factory calibration settings OR user defined
|
|
calibration (trimming) settings (i.e. trimming mode).
|
|
(++) The user defined settings can be figured out using self calibration
|
|
handled by HAL_OPAMP_SelfCalibrate, HAL_OPAMPEx_SelfCalibrateAll
|
|
(++) HAL_OPAMP_SelfCalibrate:
|
|
(+++) Runs automatically the calibration in 2 steps: for transistors
|
|
differential pair high (PMOS) or low (NMOS)
|
|
(+++) Enables the user trimming mode
|
|
(+++) Updates the init structure with trimming values with fresh calibration
|
|
results.
|
|
The user may store the calibration results for larger
|
|
(ex monitoring the trimming as a function of temperature
|
|
for instance)
|
|
(+++) For devices having several OPAMPs, HAL_OPAMPEx_SelfCalibrateAll
|
|
runs calibration of all OPAMPs in parallel to save search time.
|
|
|
|
(#) Running mode: Standalone mode
|
|
(++) Gain is set externally (gain depends on external loads).
|
|
(++) Follower mode also possible externally by connecting the inverting input to
|
|
the output.
|
|
|
|
(#) Running mode: Follower mode
|
|
(++) No Inverting Input is connected.
|
|
(++) The OPAMP(s) output(s) are internally connected to inverting input.
|
|
|
|
##### How to use this driver #####
|
|
================================================================================
|
|
[..]
|
|
|
|
*** power supply range ***
|
|
============================================
|
|
[..]
|
|
To run in low power mode:
|
|
|
|
(#) Configure the opamp using HAL_OPAMP_Init() function:
|
|
(++) Select OPAMP_POWERSUPPLY_LOW (VDDA lower than 2.4V)
|
|
(++) Otherwise select OPAMP_POWERSUPPLY_HIGH (VDDA higher than 2.4V)
|
|
|
|
*** low / normal power mode ***
|
|
============================================
|
|
[..]
|
|
To run in low power mode:
|
|
|
|
(#) Configure the opamp using HAL_OPAMP_Init() function:
|
|
(++) Select OPAMP_POWERMODE_LOWPOWER
|
|
(++) Otherwise select OPAMP_POWERMODE_NORMAL
|
|
|
|
*** Calibration ***
|
|
============================================
|
|
[..]
|
|
To run the opamp calibration self calibration:
|
|
|
|
(#) Start calibration using HAL_OPAMP_SelfCalibrate.
|
|
Store the calibration results.
|
|
|
|
*** Running mode ***
|
|
============================================
|
|
[..]
|
|
|
|
To use the opamp, perform the following steps:
|
|
|
|
(#) Fill in the HAL_OPAMP_MspInit() to
|
|
(++) Enable the OPAMP Peripheral clock using macro "__HAL_RCC_OPAMP_CLK_ENABLE()"
|
|
(++) Configure the opamp input AND output in analog mode using
|
|
HAL_GPIO_Init() to map the opamp output to the GPIO pin.
|
|
|
|
(#) Configure the opamp using HAL_OPAMP_Init() function:
|
|
(++) Select the mode
|
|
(++) Select the inverting input
|
|
(++) Select the non-inverting input
|
|
(++) Select either factory or user defined trimming mode.
|
|
(++) If the user defined trimming mode is enabled, select PMOS & NMOS trimming values
|
|
(typ. settings returned by HAL_OPAMP_SelfCalibrate function).
|
|
|
|
(#) Enable the opamp using HAL_OPAMP_Start() function.
|
|
|
|
(#) Disable the opamp using HAL_OPAMP_Stop() function.
|
|
|
|
(#) Lock the opamp in running mode using HAL_OPAMP_Lock() function.
|
|
Caution: On STM32L1, HAL OPAMP lock is software lock only (not
|
|
hardware lock as on some other STM32 devices)
|
|
|
|
(#) If needed, unlock the opamp using HAL_OPAMPEx_Unlock() function.
|
|
|
|
*** Running mode: change of configuration while OPAMP ON ***
|
|
============================================
|
|
[..]
|
|
To Re-configure OPAMP when OPAMP is ON (change on the fly)
|
|
(#) If needed, Fill in the HAL_OPAMP_MspInit()
|
|
(++) This is the case for instance if you wish to use new OPAMP I/O
|
|
|
|
(#) Configure the opamp using HAL_OPAMP_Init() function:
|
|
(++) As in configure case, selects first the parameters you wish to modify.
|
|
|
|
(#) Change from low power mode to normal power mode (& vice versa) requires
|
|
first HAL_OPAMP_DeInit() (force OPAMP OFF) and then HAL_OPAMP_Init().
|
|
In other words, of OPAMP is ON, HAL_OPAMP_Init can NOT change power mode
|
|
alone.
|
|
|
|
@endverbatim
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/*
|
|
Additionnal remark:
|
|
The OPAMPs inverting input can be selected among the list shown by table below.
|
|
The OPAMPs non inverting input can be selected among the list shown by table below.
|
|
|
|
Table 1. OPAMPs inverting/non-inverting inputs for STM32L1 devices:
|
|
+--------------------------------------------------------------------------+
|
|
| | HAL param | OPAMP1 | OPAMP2 | OPAMP3(4) |
|
|
| | name | | | |
|
|
|----------------|------------|--------------|--------------|--------------|
|
|
| Inverting | VM0 | PA2 | PA7 | PC2 |
|
|
| input (1) | VM1 | VINM pin (2) | VINM pin (2) | VINM pin (2) |
|
|
|----------------|------------|--------------|--------------|--------------|
|
|
| Non Inverting | VP0 | PA1 | PA6 | PC1 |
|
|
| input | DAC_CH1 (3)| DAC_CH1 | DAC_CH1 | --- |
|
|
| | DAC_CH2 (3)| --- | DAC_CH2 | DAC_CH2 |
|
|
+--------------------------------------------------------------------------+
|
|
(1): NA in follower mode.
|
|
(2): OPAMP input OPAMPx_VINM are dedicated OPAMP pins, their availability
|
|
depends on device package.
|
|
(3): DAC channels 1 and 2 are connected internally to OPAMP. Nevertheless,
|
|
I/O pins connected to DAC can still be used as DAC output (pins PA4
|
|
and PA5).
|
|
(4): OPAMP3 availability depends on device category.
|
|
|
|
Table 2. OPAMPs outputs for STM32L1 devices:
|
|
+--------------------------------------------------------+
|
|
| | OPAMP1 | OPAMP2 | OPAMP3(4) |
|
|
|-----------------|------------|------------|------------|
|
|
| Output | PA3 | PB0 | PC3 |
|
|
+--------------------------------------------------------+
|
|
(4) : OPAMP3 availability depends on device category
|
|
*/
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32l1xx_hal.h"
|
|
|
|
/** @addtogroup STM32L1xx_HAL_Driver
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup OPAMP OPAMP
|
|
* @brief OPAMP module driver
|
|
* @{
|
|
*/
|
|
|
|
#ifdef HAL_OPAMP_MODULE_ENABLED
|
|
|
|
#if defined (STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined (STM32L151xE) || defined (STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX) || defined (STM32L162xC) || defined (STM32L152xC) || defined (STM32L151xC)
|
|
|
|
/* Private typedef -----------------------------------------------------------*/
|
|
/* Private define ------------------------------------------------------------*/
|
|
/* Private macro -------------------------------------------------------------*/
|
|
/* Private variables ---------------------------------------------------------*/
|
|
/* Private constants ---------------------------------------------------------*/
|
|
/* Private function prototypes -----------------------------------------------*/
|
|
/* Private functions ---------------------------------------------------------*/
|
|
/* Exported functions --------------------------------------------------------*/
|
|
|
|
/** @defgroup OPAMP_Exported_Functions OPAMP Exported Functions
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup OPAMP_Exported_Functions_Group1 Initialization and de-initialization functions
|
|
* @brief Initialization and Configuration functions
|
|
*
|
|
@verbatim
|
|
==============================================================================
|
|
##### Initialization and de-initialization functions #####
|
|
==============================================================================
|
|
[..] This section provides functions allowing to:
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Initializes the OPAMP according to the specified
|
|
* parameters in the OPAMP_InitTypeDef and create the associated handle.
|
|
* @note If the selected opamp is locked, initialization can't be performed.
|
|
* To unlock the configuration, perform a system reset.
|
|
* @param hopamp: OPAMP handle
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_OPAMP_Init(OPAMP_HandleTypeDef* hopamp)
|
|
{
|
|
HAL_StatusTypeDef status = HAL_OK;
|
|
uint32_t tmp_csr = 0; /* Temporary variable to update register CSR, except bits ANAWSSELx, S7SEL2, OPA_RANGE, OPAxCALOUT */
|
|
|
|
/* Check the OPAMP handle allocation and lock status */
|
|
/* Init not allowed if calibration is ongoing */
|
|
if((hopamp == NULL) || (hopamp->State == HAL_OPAMP_STATE_BUSYLOCKED)
|
|
|| (hopamp->State == HAL_OPAMP_STATE_CALIBBUSY) )
|
|
{
|
|
status = HAL_ERROR;
|
|
}
|
|
else
|
|
{
|
|
/* Check the parameter */
|
|
assert_param(IS_OPAMP_ALL_INSTANCE(hopamp->Instance));
|
|
|
|
/* Set OPAMP parameters */
|
|
assert_param(IS_OPAMP_POWER_SUPPLY_RANGE(hopamp->Init.PowerSupplyRange));
|
|
assert_param(IS_OPAMP_POWERMODE(hopamp->Init.PowerMode));
|
|
assert_param(IS_OPAMP_FUNCTIONAL_NORMALMODE(hopamp->Init.Mode));
|
|
assert_param(IS_OPAMP_NONINVERTING_INPUT_CHECK_INSTANCE(hopamp, hopamp->Init.NonInvertingInput));
|
|
assert_param(IS_OPAMP_TRIMMING(hopamp->Init.UserTrimming));
|
|
|
|
if (hopamp->Init.Mode != OPAMP_FOLLOWER_MODE)
|
|
{
|
|
assert_param(IS_OPAMP_INVERTING_INPUT(hopamp->Init.InvertingInput));
|
|
}
|
|
|
|
if (hopamp->Init.UserTrimming == OPAMP_TRIMMING_USER)
|
|
{
|
|
if (hopamp->Init.PowerMode == OPAMP_POWERMODE_NORMAL)
|
|
{
|
|
assert_param(IS_OPAMP_TRIMMINGVALUE(hopamp->Init.TrimmingValueP));
|
|
assert_param(IS_OPAMP_TRIMMINGVALUE(hopamp->Init.TrimmingValueN));
|
|
}
|
|
else
|
|
{
|
|
assert_param(IS_OPAMP_TRIMMINGVALUE(hopamp->Init.TrimmingValuePLowPower));
|
|
assert_param(IS_OPAMP_TRIMMINGVALUE(hopamp->Init.TrimmingValueNLowPower));
|
|
}
|
|
}
|
|
|
|
if(hopamp->State == HAL_OPAMP_STATE_RESET)
|
|
{
|
|
/* Allocate lock resource and initialize it */
|
|
hopamp->Lock = HAL_UNLOCKED;
|
|
}
|
|
|
|
/* Call MSP init function */
|
|
HAL_OPAMP_MspInit(hopamp);
|
|
|
|
/* Set OPAMP parameters */
|
|
/* - Set internal switches in function of: */
|
|
/* - OPAMP selected mode: standalone or follower. */
|
|
/* - Non-inverting input connection */
|
|
/* - Inverting input connection */
|
|
/* - Set power supply range */
|
|
/* - Set power mode and associated calibration parameters */
|
|
|
|
/* Get OPAMP CSR register into temporary variable */
|
|
/* Note: OPAMP register CSR is written directly, independently of OPAMP */
|
|
/* instance, because all OPAMP settings are dispatched in the same */
|
|
/* register. */
|
|
/* Settings of bits for each OPAMP instances are managed case by */
|
|
/* case using macro (OPAMP_CSR_S3SELX(), OPAMP_CSR_ANAWSELX(), ...) */
|
|
tmp_csr = OPAMP->CSR;
|
|
|
|
/* Open all switches on non-inverting input, inverting input and output */
|
|
/* feedback. */
|
|
CLEAR_BIT(tmp_csr, OPAMP_CSR_ALL_SWITCHES(hopamp));
|
|
|
|
/* Set internal switches in function of OPAMP mode selected: standalone */
|
|
/* or follower. */
|
|
/* If follower mode is selected, feedback switch S3 is closed and */
|
|
/* inverting inputs switches are let opened. */
|
|
/* If standalone mode is selected, feedback switch S3 is let opened and */
|
|
/* the selected inverting inputs switch is closed. */
|
|
if (hopamp->Init.Mode == OPAMP_FOLLOWER_MODE)
|
|
{
|
|
/* Follower mode: Close switches S3 and SanB */
|
|
SET_BIT(tmp_csr, OPAMP_CSR_S3SELX(hopamp));
|
|
}
|
|
else
|
|
{
|
|
/* Set internal switches in function of inverting input selected: */
|
|
/* Close switch to connect OPAMP inverting input to the selected */
|
|
/* input: dedicated IO pin or alternative IO pin available on some */
|
|
/* device packages. */
|
|
if (hopamp->Init.InvertingInput == OPAMP_INVERTINGINPUT_IO0)
|
|
{
|
|
/* Close switch to connect OPAMP non-inverting input to */
|
|
/* dedicated IO pin low-leakage. */
|
|
SET_BIT(tmp_csr, OPAMP_CSR_S4SELX(hopamp));
|
|
}
|
|
else
|
|
{
|
|
/* Close switch to connect OPAMP inverting input to alternative */
|
|
/* IO pin available on some device packages. */
|
|
SET_BIT(tmp_csr, OPAMP_CSR_ANAWSELX(hopamp));
|
|
}
|
|
}
|
|
|
|
/* Set internal switches in function of non-inverting input selected: */
|
|
/* Close switch to connect OPAMP non-inverting input to the selected */
|
|
/* input: dedicated IO pin or DAC channel. */
|
|
if (hopamp->Init.NonInvertingInput == OPAMP_NONINVERTINGINPUT_IO0)
|
|
{
|
|
/* Close switch to connect OPAMP non-inverting input to */
|
|
/* dedicated IO pin low-leakage. */
|
|
SET_BIT(tmp_csr, OPAMP_CSR_S5SELX(hopamp));
|
|
}
|
|
else if (hopamp->Init.NonInvertingInput == OPAMP_NONINVERTINGINPUT_DAC_CH1)
|
|
{
|
|
|
|
/* Particular case for connection to DAC channel 1: */
|
|
/* OPAMP_NONINVERTINGINPUT_DAC_CH1 available on OPAMP1 and OPAMP2 only */
|
|
/* (OPAMP3 availability depends on device category). */
|
|
if ((hopamp->Instance == OPAMP1) || (hopamp->Instance == OPAMP2))
|
|
{
|
|
/* Close switch to connect OPAMP non-inverting input to */
|
|
/* DAC channel 1. */
|
|
SET_BIT(tmp_csr, OPAMP_CSR_S6SELX(hopamp));
|
|
}
|
|
else
|
|
{
|
|
/* Set HAL status to error if another OPAMP instance as OPAMP1 or */
|
|
/* OPAMP2 is intended to be connected to DAC channel 2. */
|
|
status = HAL_ERROR;
|
|
}
|
|
}
|
|
else /* if (hopamp->Init.NonInvertingInput == */
|
|
/* OPAMP_NONINVERTINGINPUT_DAC_CH2 ) */
|
|
{
|
|
/* Particular case for connection to DAC channel 2: */
|
|
/* OPAMP_NONINVERTINGINPUT_DAC_CH2 available on OPAMP2 and OPAMP3 only */
|
|
/* (OPAMP3 availability depends on device category). */
|
|
if (hopamp->Instance == OPAMP2)
|
|
{
|
|
/* Close switch to connect OPAMP non-inverting input to */
|
|
/* DAC channel 2. */
|
|
SET_BIT(tmp_csr, OPAMP_CSR_S7SEL2);
|
|
}
|
|
/* If OPAMP3 is selected (if available) */
|
|
else if (hopamp->Instance != OPAMP1)
|
|
{
|
|
/* Close switch to connect OPAMP non-inverting input to */
|
|
/* DAC channel 2. */
|
|
SET_BIT(tmp_csr, OPAMP_CSR_S6SELX(hopamp));
|
|
}
|
|
else
|
|
{
|
|
/* Set HAL status to error if another OPAMP instance as OPAMP2 or */
|
|
/* OPAMP3 (if available) is intended to be connected to DAC channel 2.*/
|
|
status = HAL_ERROR;
|
|
}
|
|
}
|
|
|
|
/* Continue OPAMP configuration if settings of switches are correct */
|
|
if (status != HAL_ERROR)
|
|
{
|
|
/* Set power mode and associated calibration parameters */
|
|
if (hopamp->Init.PowerMode != OPAMP_POWERMODE_LOWPOWER)
|
|
{
|
|
/* Set normal mode */
|
|
CLEAR_BIT(tmp_csr, OPAMP_CSR_OPAXLPM(hopamp));
|
|
|
|
if (hopamp->Init.UserTrimming == OPAMP_TRIMMING_USER)
|
|
{
|
|
/* Set calibration mode (factory or user) and values for */
|
|
/* transistors differential pair high (PMOS) and low (NMOS) for */
|
|
/* normal mode. */
|
|
MODIFY_REG(OPAMP->OTR, OPAMP_OTR_OT_USER |
|
|
OPAMP_OFFSET_TRIM_SET(hopamp, OPAMP_FACTORYTRIMMING_N, OPAMP_TRIM_VALUE_MASK) |
|
|
OPAMP_OFFSET_TRIM_SET(hopamp, OPAMP_FACTORYTRIMMING_P, OPAMP_TRIM_VALUE_MASK) ,
|
|
hopamp->Init.UserTrimming |
|
|
OPAMP_OFFSET_TRIM_SET(hopamp, OPAMP_FACTORYTRIMMING_N, hopamp->Init.TrimmingValueN) |
|
|
OPAMP_OFFSET_TRIM_SET(hopamp, OPAMP_FACTORYTRIMMING_P, hopamp->Init.TrimmingValueP) );
|
|
}
|
|
else
|
|
{
|
|
/* Set calibration mode to factory */
|
|
CLEAR_BIT(OPAMP->OTR, OPAMP_OTR_OT_USER);
|
|
}
|
|
|
|
}
|
|
else
|
|
{
|
|
/* Set low power mode */
|
|
SET_BIT(tmp_csr, OPAMP_CSR_OPAXLPM(hopamp));
|
|
|
|
if (hopamp->Init.UserTrimming == OPAMP_TRIMMING_USER)
|
|
{
|
|
/* Set calibration mode to user trimming */
|
|
SET_BIT(OPAMP->OTR, OPAMP_OTR_OT_USER);
|
|
|
|
/* Set values for transistors differential pair high (PMOS) and low */
|
|
/* (NMOS) for low power mode. */
|
|
MODIFY_REG(OPAMP->LPOTR, OPAMP_OFFSET_TRIM_SET(hopamp, OPAMP_FACTORYTRIMMING_N, OPAMP_TRIM_VALUE_MASK) |
|
|
OPAMP_OFFSET_TRIM_SET(hopamp, OPAMP_FACTORYTRIMMING_P, OPAMP_TRIM_VALUE_MASK) ,
|
|
OPAMP_OFFSET_TRIM_SET(hopamp, OPAMP_FACTORYTRIMMING_N, hopamp->Init.TrimmingValueNLowPower) |
|
|
OPAMP_OFFSET_TRIM_SET(hopamp, OPAMP_FACTORYTRIMMING_P, hopamp->Init.TrimmingValuePLowPower) );
|
|
}
|
|
else
|
|
{
|
|
/* Set calibration mode to factory trimming */
|
|
CLEAR_BIT(OPAMP->OTR, OPAMP_OTR_OT_USER);
|
|
}
|
|
|
|
}
|
|
|
|
|
|
/* Configure the power supply range */
|
|
MODIFY_REG(tmp_csr, OPAMP_CSR_AOP_RANGE,
|
|
hopamp->Init.PowerSupplyRange);
|
|
|
|
/* Set OPAMP CSR register from temporary variable */
|
|
/* This allows to apply all changes on one time, in case of update on */
|
|
/* the fly with OPAMP previously set and running: */
|
|
/* - to avoid hazardous transient switches settings (risk of short */
|
|
/* circuit) */
|
|
/* - to avoid interruption of input signal */
|
|
OPAMP->CSR = tmp_csr;
|
|
|
|
|
|
/* Update the OPAMP state */
|
|
/* If coming from state reset: Update from state RESET to state READY */
|
|
if (hopamp->State == HAL_OPAMP_STATE_RESET)
|
|
{
|
|
hopamp->State = HAL_OPAMP_STATE_READY;
|
|
}
|
|
/* else: OPAMP state remains READY or BUSY state (no update) */
|
|
}
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* @brief DeInitializes the OPAMP peripheral
|
|
* @note Deinitialization can be performed if the OPAMP configuration is locked.
|
|
* (the OPAMP lock is SW in STM32L1)
|
|
* @param hopamp: OPAMP handle
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_OPAMP_DeInit(OPAMP_HandleTypeDef* hopamp)
|
|
{
|
|
HAL_StatusTypeDef status = HAL_OK;
|
|
|
|
/* Check the OPAMP handle allocation */
|
|
/* DeInit not allowed if calibration is ongoing */
|
|
if((hopamp == NULL) || (hopamp->State == HAL_OPAMP_STATE_CALIBBUSY))
|
|
{
|
|
status = HAL_ERROR;
|
|
}
|
|
else
|
|
{
|
|
/* Check the parameter */
|
|
assert_param(IS_OPAMP_ALL_INSTANCE(hopamp->Instance));
|
|
|
|
/* Disable the selected opamp */
|
|
SET_BIT (OPAMP->CSR, OPAMP_CSR_OPAXPD(hopamp));
|
|
|
|
/* Open all switches on non-inverting input, inverting input and output */
|
|
/* feedback. */
|
|
/* Note: OPAMP register CSR is written directly, independently of OPAMP */
|
|
/* instance, because all OPAMP settings are dispatched in the same */
|
|
/* register. */
|
|
/* Settings of bits for each OPAMP instances are managed case by */
|
|
/* case using macro (OPAMP_CSR_S3SELX(), OPAMP_CSR_ANAWSELX(), ...) */
|
|
CLEAR_BIT(OPAMP->CSR, OPAMP_CSR_ALL_SWITCHES(hopamp));
|
|
|
|
/* Note: Registers and bits shared with other OPAMP instances are kept */
|
|
/* unchanged, to not impact other OPAMP while operating on the */
|
|
/* selected OPAMP. */
|
|
/* Unchanged: bit OPAMP_OTR_OT_USER (parameter "UserTrimming") */
|
|
/* bit OPAMP_CSR_AOP_RANGE (parameter "PowerSupplyRange")*/
|
|
|
|
/* DeInit the low level hardware: GPIO, CLOCK and NVIC */
|
|
HAL_OPAMP_MspDeInit(hopamp);
|
|
|
|
/* Update the OPAMP state*/
|
|
hopamp->State = HAL_OPAMP_STATE_RESET;
|
|
}
|
|
|
|
/* Process unlocked */
|
|
__HAL_UNLOCK(hopamp);
|
|
|
|
return status;
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief Initializes the OPAMP MSP.
|
|
* @param hopamp: OPAMP handle
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_OPAMP_MspInit(OPAMP_HandleTypeDef* hopamp)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hopamp);
|
|
|
|
/* NOTE : This function Should not be modified, when the callback is needed,
|
|
the function "HAL_OPAMP_MspInit()" must be implemented in the user file.
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @brief DeInitializes OPAMP MSP.
|
|
* @param hopamp: OPAMP handle
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_OPAMP_MspDeInit(OPAMP_HandleTypeDef* hopamp)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hopamp);
|
|
|
|
/* NOTE : This function Should not be modified, when the callback is needed,
|
|
the function "HAL_OPAMP_MspDeInit()" must be implemented in the user file.
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
/** @defgroup OPAMP_Exported_Functions_Group2 IO operation functions
|
|
* @brief IO operation functions
|
|
*
|
|
@verbatim
|
|
===============================================================================
|
|
##### IO operation functions #####
|
|
===============================================================================
|
|
[..]
|
|
This subsection provides a set of functions allowing to manage the OPAMP
|
|
start, stop and calibration actions.
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Start the opamp
|
|
* @param hopamp: OPAMP handle
|
|
* @retval HAL status
|
|
*/
|
|
|
|
HAL_StatusTypeDef HAL_OPAMP_Start(OPAMP_HandleTypeDef* hopamp)
|
|
{
|
|
HAL_StatusTypeDef status = HAL_OK;
|
|
|
|
/* Check the OPAMP handle allocation */
|
|
/* Check if OPAMP locked */
|
|
if((hopamp == NULL) || (hopamp->State == HAL_OPAMP_STATE_BUSYLOCKED))
|
|
{
|
|
status = HAL_ERROR;
|
|
}
|
|
else
|
|
{
|
|
/* Check the parameter */
|
|
assert_param(IS_OPAMP_ALL_INSTANCE(hopamp->Instance));
|
|
|
|
if(hopamp->State == HAL_OPAMP_STATE_READY)
|
|
{
|
|
/* Enable the selected opamp */
|
|
CLEAR_BIT (OPAMP->CSR, OPAMP_CSR_OPAXPD(hopamp));
|
|
|
|
/* Update the OPAMP state */
|
|
/* From HAL_OPAMP_STATE_READY to HAL_OPAMP_STATE_BUSY */
|
|
hopamp->State = HAL_OPAMP_STATE_BUSY;
|
|
}
|
|
else
|
|
{
|
|
status = HAL_ERROR;
|
|
}
|
|
|
|
}
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* @brief Stop the opamp
|
|
* @param hopamp: OPAMP handle
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_OPAMP_Stop(OPAMP_HandleTypeDef* hopamp)
|
|
{
|
|
HAL_StatusTypeDef status = HAL_OK;
|
|
|
|
/* Check the OPAMP handle allocation */
|
|
/* Check if OPAMP locked */
|
|
/* Check if OPAMP calibration ongoing */
|
|
if((hopamp == NULL) || (hopamp->State == HAL_OPAMP_STATE_BUSYLOCKED) \
|
|
|| (hopamp->State == HAL_OPAMP_STATE_CALIBBUSY))
|
|
{
|
|
status = HAL_ERROR;
|
|
}
|
|
else
|
|
{
|
|
/* Check the parameter */
|
|
assert_param(IS_OPAMP_ALL_INSTANCE(hopamp->Instance));
|
|
|
|
if(hopamp->State == HAL_OPAMP_STATE_BUSY)
|
|
{
|
|
/* Disable the selected opamp */
|
|
SET_BIT (OPAMP->CSR, OPAMP_CSR_OPAXPD(hopamp));
|
|
|
|
/* Update the OPAMP state*/
|
|
/* From HAL_OPAMP_STATE_BUSY to HAL_OPAMP_STATE_READY*/
|
|
hopamp->State = HAL_OPAMP_STATE_READY;
|
|
}
|
|
else
|
|
{
|
|
status = HAL_ERROR;
|
|
}
|
|
}
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* @brief Run the self calibration of one OPAMP
|
|
* @note Trimming values (PMOS & NMOS) are updated and user trimming is
|
|
* enabled if calibration is succesful.
|
|
* @note Calibration is performed in the mode specified in OPAMP init
|
|
* structure (mode normal or low-power). To perform calibration for
|
|
* both modes, repeat this function twice after OPAMP init structure
|
|
* accordingly updated.
|
|
* @note Calibration runs about 10 ms.
|
|
* @param hopamp handle
|
|
* @retval Updated offset trimming values (PMOS & NMOS), user trimming is enabled
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_OPAMP_SelfCalibrate(OPAMP_HandleTypeDef* hopamp)
|
|
{
|
|
HAL_StatusTypeDef status = HAL_OK;
|
|
|
|
uint32_t* opamp_trimmingvalue = 0;
|
|
uint32_t opamp_trimmingvaluen = 0;
|
|
uint32_t opamp_trimmingvaluep = 0;
|
|
|
|
uint32_t trimming_diff_pair = 0; /* Selection of differential transistors pair high or low */
|
|
|
|
__IO uint32_t* tmp_opamp_reg_trimming; /* Selection of register of trimming depending on power mode: OTR or LPOTR */
|
|
uint32_t tmp_opamp_otr_otuser = 0; /* Selection of bit OPAMP_OTR_OT_USER depending on trimming register pointed: OTR or LPOTR */
|
|
|
|
uint32_t tmp_Opaxcalout_DefaultSate = 0; /* Bit OPAMP_CSR_OPAXCALOUT default state when trimming value is 00000b. Used to detect the bit toggling */
|
|
|
|
uint32_t tmp_OpaxSwitchesContextBackup = 0;
|
|
|
|
uint8_t trimming_diff_pair_iteration_count = 0; /* For calibration loop algorithm: to repeat the calibration loop for both differential transistors pair high and low */
|
|
uint8_t delta = 0; /* For calibration loop algorithm: Variable for dichotomy steps value */
|
|
uint8_t final_step_check = 0; /* For calibration loop algorithm: Flag for additional check of last trimming step */
|
|
|
|
/* Check the OPAMP handle allocation */
|
|
/* Check if OPAMP locked */
|
|
if((hopamp == NULL) || (hopamp->State == HAL_OPAMP_STATE_BUSYLOCKED))
|
|
{
|
|
status = HAL_ERROR;
|
|
}
|
|
else
|
|
{
|
|
|
|
/* Check if OPAMP in calibration mode and calibration not yet enable */
|
|
if(hopamp->State == HAL_OPAMP_STATE_READY)
|
|
{
|
|
/* Check the parameter */
|
|
assert_param(IS_OPAMP_ALL_INSTANCE(hopamp->Instance));
|
|
assert_param(IS_OPAMP_POWERMODE(hopamp->Init.PowerMode));
|
|
|
|
/* Update OPAMP state */
|
|
hopamp->State = HAL_OPAMP_STATE_CALIBBUSY;
|
|
|
|
/* Backup of switches configuration to restore it at the end of the */
|
|
/* calibration. */
|
|
tmp_OpaxSwitchesContextBackup = READ_BIT(OPAMP->CSR, OPAMP_CSR_ALL_SWITCHES(hopamp));
|
|
|
|
/* Open all switches on non-inverting input, inverting input and output */
|
|
/* feedback. */
|
|
CLEAR_BIT(OPAMP->CSR, OPAMP_CSR_ALL_SWITCHES(hopamp));
|
|
|
|
/* Set calibration mode to user programmed trimming values */
|
|
SET_BIT(OPAMP->OTR, OPAMP_OTR_OT_USER);
|
|
|
|
|
|
/* Select trimming settings depending on power mode */
|
|
if (hopamp->Init.PowerMode == OPAMP_POWERMODE_NORMAL)
|
|
{
|
|
tmp_opamp_otr_otuser = OPAMP_OTR_OT_USER;
|
|
tmp_opamp_reg_trimming = &OPAMP->OTR;
|
|
}
|
|
else
|
|
{
|
|
tmp_opamp_otr_otuser = 0x00000000;
|
|
tmp_opamp_reg_trimming = &OPAMP->LPOTR;
|
|
}
|
|
|
|
|
|
/* Enable the selected opamp */
|
|
CLEAR_BIT (OPAMP->CSR, OPAMP_CSR_OPAXPD(hopamp));
|
|
|
|
/* Perform trimming for both differential transistors pair high and low */
|
|
for (trimming_diff_pair_iteration_count = 0; trimming_diff_pair_iteration_count <=1; trimming_diff_pair_iteration_count++)
|
|
{
|
|
if (trimming_diff_pair_iteration_count == 0)
|
|
{
|
|
/* Calibration of transistors differential pair high (NMOS) */
|
|
trimming_diff_pair = OPAMP_FACTORYTRIMMING_N;
|
|
opamp_trimmingvalue = &opamp_trimmingvaluen;
|
|
|
|
/* Set bit OPAMP_CSR_OPAXCALOUT default state when trimming value */
|
|
/* is 00000b. Used to detect the bit toggling during trimming. */
|
|
tmp_Opaxcalout_DefaultSate = RESET;
|
|
|
|
/* Enable calibration for N differential pair */
|
|
MODIFY_REG(OPAMP->CSR, OPAMP_CSR_OPAXCAL_L(hopamp),
|
|
OPAMP_CSR_OPAXCAL_H(hopamp) );
|
|
}
|
|
else /* (trimming_diff_pair_iteration_count == 1) */
|
|
{
|
|
/* Calibration of transistors differential pair low (PMOS) */
|
|
trimming_diff_pair = OPAMP_FACTORYTRIMMING_P;
|
|
opamp_trimmingvalue = &opamp_trimmingvaluep;
|
|
|
|
/* Set bit OPAMP_CSR_OPAXCALOUT default state when trimming value */
|
|
/* is 00000b. Used to detect the bit toggling during trimming. */
|
|
tmp_Opaxcalout_DefaultSate = OPAMP_CSR_OPAXCALOUT(hopamp);
|
|
|
|
/* Enable calibration for P differential pair */
|
|
MODIFY_REG(OPAMP->CSR, OPAMP_CSR_OPAXCAL_H(hopamp),
|
|
OPAMP_CSR_OPAXCAL_L(hopamp) );
|
|
}
|
|
|
|
|
|
/* Perform calibration parameter search by dichotomy sweep */
|
|
/* - Delta initial value 16: for 5 dichotomy steps: 16 for the */
|
|
/* initial range, then successive delta sweeps (8, 4, 2, 1). */
|
|
/* can extend the search range to +/- 15 units. */
|
|
/* - Trimming initial value 15: search range will go from 0 to 30 */
|
|
/* (Trimming value 31 is forbidden). */
|
|
/* Note: After dichotomy sweep, the trimming result is determined. */
|
|
/* However, the final trimming step is deduced from previous */
|
|
/* trimming steps tested but is not effectively tested. */
|
|
/* An additional test step (using variable "final_step_check") */
|
|
/* allow to Test the final trimming step. */
|
|
*opamp_trimmingvalue = 15;
|
|
delta = 16;
|
|
|
|
while ((delta != 0) || (final_step_check == 1))
|
|
{
|
|
/* Set candidate trimming */
|
|
MODIFY_REG(*tmp_opamp_reg_trimming, OPAMP_OFFSET_TRIM_SET(hopamp, trimming_diff_pair, OPAMP_TRIM_VALUE_MASK) ,
|
|
OPAMP_OFFSET_TRIM_SET(hopamp, trimming_diff_pair, *opamp_trimmingvalue) | tmp_opamp_otr_otuser);
|
|
|
|
/* Offset trimming time: during calibration, minimum time needed */
|
|
/* between two steps to have 1 mV accuracy. */
|
|
HAL_Delay(OPAMP_TRIMMING_DELAY);
|
|
|
|
/* Set flag for additional check of last trimming step equal to */
|
|
/* dichotomy step before its division by 2 (equivalent to previous */
|
|
/* value of dichotomy step). */
|
|
final_step_check = delta;
|
|
|
|
/* Divide range by 2 to continue dichotomy sweep */
|
|
delta >>= 1;
|
|
|
|
/* Set trimming values for next iteration in function of trimming */
|
|
/* result toggle (versus initial state). */
|
|
/* Note: on the last trimming loop, delta is equal to 0 and */
|
|
/* therefore has no effect. */
|
|
if (READ_BIT(OPAMP->CSR, OPAMP_CSR_OPAXCALOUT(hopamp)) != tmp_Opaxcalout_DefaultSate)
|
|
{
|
|
/* If calibration output is has toggled, try lower trimming */
|
|
*opamp_trimmingvalue -= delta;
|
|
}
|
|
else
|
|
{
|
|
/* If calibration output is has not toggled, try higher trimming */
|
|
*opamp_trimmingvalue += delta;
|
|
}
|
|
|
|
}
|
|
|
|
/* Check trimming result of the selected step and perform final fine */
|
|
/* trimming. */
|
|
/* - If calibration output is has toggled: the current step is */
|
|
/* already optimized. */
|
|
/* - If calibration output is has not toggled: the current step can */
|
|
/* be optimized by incrementing it of one step. */
|
|
if (READ_BIT(OPAMP->CSR, OPAMP_CSR_OPAXCALOUT(hopamp)) == tmp_Opaxcalout_DefaultSate)
|
|
{
|
|
*opamp_trimmingvalue += 1;
|
|
|
|
/* Set final fine trimming */
|
|
MODIFY_REG(*tmp_opamp_reg_trimming, OPAMP_OFFSET_TRIM_SET(hopamp, trimming_diff_pair, OPAMP_TRIM_VALUE_MASK) ,
|
|
OPAMP_OFFSET_TRIM_SET(hopamp, trimming_diff_pair, *opamp_trimmingvalue) | tmp_opamp_otr_otuser);
|
|
}
|
|
|
|
}
|
|
|
|
|
|
/* Disable calibration for P and N differential pairs */
|
|
/* Disable the selected opamp */
|
|
CLEAR_BIT (OPAMP->CSR, (OPAMP_CSR_OPAXCAL_H(hopamp) |
|
|
OPAMP_CSR_OPAXCAL_L(hopamp) |
|
|
OPAMP_CSR_OPAXPD(hopamp)) );
|
|
|
|
/* Backup of switches configuration to restore it at the end of the */
|
|
/* calibration. */
|
|
SET_BIT(OPAMP->CSR, tmp_OpaxSwitchesContextBackup);
|
|
|
|
/* Self calibration is successful */
|
|
/* Store calibration (user trimming) results in init structure. */
|
|
|
|
/* Set user trimming mode */
|
|
hopamp->Init.UserTrimming = OPAMP_TRIMMING_USER;
|
|
|
|
/* Affect calibration parameters depending on mode normal/low power */
|
|
if (hopamp->Init.PowerMode != OPAMP_POWERMODE_LOWPOWER)
|
|
{
|
|
/* Write calibration result N */
|
|
hopamp->Init.TrimmingValueN = opamp_trimmingvaluen;
|
|
/* Write calibration result P */
|
|
hopamp->Init.TrimmingValueP = opamp_trimmingvaluep;
|
|
}
|
|
else
|
|
{
|
|
/* Write calibration result N */
|
|
hopamp->Init.TrimmingValueNLowPower = opamp_trimmingvaluen;
|
|
/* Write calibration result P */
|
|
hopamp->Init.TrimmingValuePLowPower = opamp_trimmingvaluep;
|
|
}
|
|
|
|
/* Update OPAMP state */
|
|
hopamp->State = HAL_OPAMP_STATE_READY;
|
|
|
|
}
|
|
|
|
else
|
|
{
|
|
/* OPAMP can not be calibrated from this mode */
|
|
status = HAL_ERROR;
|
|
}
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup OPAMP_Exported_Functions_Group3 Peripheral Control functions
|
|
* @brief Peripheral Control functions
|
|
*
|
|
@verbatim
|
|
===============================================================================
|
|
##### Peripheral Control functions #####
|
|
===============================================================================
|
|
[..]
|
|
This subsection provides a set of functions allowing to control the OPAMP data
|
|
transfers.
|
|
|
|
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Lock the selected opamp configuration.
|
|
* Caution: On STM32L1, HAL OPAMP lock is software lock only
|
|
* (not hardware lock as available on some other STM32 devices)
|
|
* @param hopamp: OPAMP handle
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_OPAMP_Lock(OPAMP_HandleTypeDef* hopamp)
|
|
{
|
|
HAL_StatusTypeDef status = HAL_OK;
|
|
|
|
/* Check the OPAMP handle allocation */
|
|
/* Check if OPAMP locked */
|
|
/* OPAMP can be locked when enabled and running in normal mode */
|
|
/* It is meaningless otherwise */
|
|
if((hopamp == NULL) || (hopamp->State == HAL_OPAMP_STATE_RESET) \
|
|
|| (hopamp->State == HAL_OPAMP_STATE_READY) \
|
|
|| (hopamp->State == HAL_OPAMP_STATE_CALIBBUSY)\
|
|
|| (hopamp->State == HAL_OPAMP_STATE_BUSYLOCKED))
|
|
|
|
{
|
|
status = HAL_ERROR;
|
|
}
|
|
|
|
else
|
|
{
|
|
/* Check the parameter */
|
|
assert_param(IS_OPAMP_ALL_INSTANCE(hopamp->Instance));
|
|
|
|
/* OPAMP state changed to locked */
|
|
hopamp->State = HAL_OPAMP_STATE_BUSYLOCKED;
|
|
}
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* @brief Return the OPAMP factory trimming value
|
|
* Caution: On STM32L1 OPAMP, user can retrieve factory trimming if
|
|
* OPAMP has never been set to user trimming before.
|
|
* Therefore, this fonction must be called when OPAMP init
|
|
* parameter "UserTrimming" is set to trimming factory,
|
|
* and before OPAMP calibration (function
|
|
* "HAL_OPAMP_SelfCalibrate()").
|
|
* Otherwise, factory triming value cannot be retrieved and
|
|
* error status is returned.
|
|
* @param hopamp : OPAMP handle
|
|
* @param trimmingoffset : Trimming offset (P or N)
|
|
* This parameter must be a value of @ref OPAMP_FactoryTrimming
|
|
* @note Calibration parameter retrieved is corresponding to the mode
|
|
* specified in OPAMP init structure (mode normal or low-power).
|
|
* To retrieve calibration parameters for both modes, repeat this
|
|
* function after OPAMP init structure accordingly updated.
|
|
* @retval Trimming value (P or N): range: 0->31
|
|
* or OPAMP_FACTORYTRIMMING_DUMMY if trimming value is not available
|
|
*
|
|
*/
|
|
HAL_OPAMP_TrimmingValueTypeDef HAL_OPAMP_GetTrimOffset (OPAMP_HandleTypeDef *hopamp, uint32_t trimmingoffset)
|
|
{
|
|
HAL_OPAMP_TrimmingValueTypeDef trimmingvalue;
|
|
__IO uint32_t* tmp_opamp_reg_trimming; /* Selection of register of trimming depending on power mode: OTR or LPOTR */
|
|
|
|
/* Check the OPAMP handle allocation */
|
|
/* Value can be retrieved in HAL_OPAMP_STATE_READY state */
|
|
if((hopamp == NULL) || (hopamp->State == HAL_OPAMP_STATE_RESET)
|
|
|| (hopamp->State == HAL_OPAMP_STATE_BUSY)
|
|
|| (hopamp->State == HAL_OPAMP_STATE_CALIBBUSY)
|
|
|| (hopamp->State == HAL_OPAMP_STATE_BUSYLOCKED))
|
|
{
|
|
trimmingvalue = OPAMP_FACTORYTRIMMING_DUMMY;
|
|
}
|
|
else
|
|
{
|
|
/* Check the parameter */
|
|
assert_param(IS_OPAMP_ALL_INSTANCE(hopamp->Instance));
|
|
assert_param(IS_OPAMP_FACTORYTRIMMING(trimmingoffset));
|
|
assert_param(IS_OPAMP_POWERMODE(hopamp->Init.PowerMode));
|
|
|
|
/* Check the trimming mode */
|
|
if (hopamp->Init.UserTrimming == OPAMP_TRIMMING_USER)
|
|
{
|
|
/* This fonction must called when OPAMP init parameter "UserTrimming" */
|
|
/* is set to trimming factory, and before OPAMP calibration (function */
|
|
/* "HAL_OPAMP_SelfCalibrate()"). */
|
|
/* Otherwise, factory triming value cannot be retrieved and error */
|
|
/* status is returned. */
|
|
trimmingvalue = OPAMP_FACTORYTRIMMING_DUMMY;
|
|
}
|
|
else
|
|
{
|
|
/* Select trimming settings depending on power mode */
|
|
if (hopamp->Init.PowerMode == OPAMP_POWERMODE_NORMAL)
|
|
{
|
|
tmp_opamp_reg_trimming = &OPAMP->OTR;
|
|
}
|
|
else
|
|
{
|
|
tmp_opamp_reg_trimming = &OPAMP->LPOTR;
|
|
}
|
|
|
|
/* Get factory trimming */
|
|
trimmingvalue = ((*tmp_opamp_reg_trimming >> OPAMP_OFFSET_TRIM_BITSPOSITION(hopamp, trimmingoffset)) & OPAMP_TRIM_VALUE_MASK);
|
|
}
|
|
}
|
|
|
|
return trimmingvalue;
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
/** @defgroup OPAMP_Exported_Functions_Group4 Peripheral State functions
|
|
* @brief Peripheral State functions
|
|
*
|
|
@verbatim
|
|
===============================================================================
|
|
##### Peripheral State functions #####
|
|
===============================================================================
|
|
[..]
|
|
This subsection permit to get in run-time the status of the peripheral.
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Return the OPAMP state
|
|
* @param hopamp : OPAMP handle
|
|
* @retval HAL state
|
|
*/
|
|
HAL_OPAMP_StateTypeDef HAL_OPAMP_GetState(OPAMP_HandleTypeDef* hopamp)
|
|
{
|
|
/* Check the OPAMP handle allocation */
|
|
if(hopamp == NULL)
|
|
{
|
|
return HAL_OPAMP_STATE_RESET;
|
|
}
|
|
|
|
/* Check the parameter */
|
|
assert_param(IS_OPAMP_ALL_INSTANCE(hopamp->Instance));
|
|
|
|
return hopamp->State;
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#endif /* STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX || STM32L162xC || STM32L152xC || STM32L151xC */
|
|
|
|
#endif /* HAL_OPAMP_MODULE_ENABLED */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|