ARMmbed
/
mbed-os
mirror of https://github.com/ARMmbed/mbed-os.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
mbed-os/features/cellular/TESTS/api/cellular_network/main.cpp

324 lines
13 KiB
C++
Raw Blame History

/*
* Copyright (c) 2018, Arm Limited and affiliates.
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#if !defined(MBED_CONF_NSAPI_PRESENT)
#error [NOT_SUPPORTED] A json configuration file is needed. Skipping this build.
#endif
#include "CellularUtil.h" // for CELLULAR_ helper macros
#include "CellularTargets.h"
#ifndef CELLULAR_DEVICE
#error [NOT_SUPPORTED] CELLULAR_DEVICE must be defined
#endif
#ifndef MBED_CONF_APP_CELLULAR_SIM_PIN
#error [NOT_SUPPORTED] SIM pin code is needed. Skipping this build.
#endif
#if defined(TARGET_ADV_WISE_1570) || defined(TARGET_MTB_ADV_WISE_1570)
#error [NOT_SUPPORTED] target MTB_ADV_WISE_1570 is too unstable for network tests, IoT network is unstable
#endif
#include "greentea-client/test_env.h"
#include "unity.h"
#include "utest.h"
#include "mbed.h"
#include "AT_CellularNetwork.h"
#include "CellularContext.h"
#include "CellularDevice.h"
#include "../../cellular_tests_common.h"
#include CELLULAR_STRINGIFY(CELLULAR_DEVICE.h)
#define NETWORK_TIMEOUT (180*1000)
static CellularContext *ctx;
static CellularDevice *device;
static CellularNetwork *nw;
static void init_network_interface()
{
ctx = CellularContext::get_default_instance();
TEST_ASSERT(ctx != NULL);
ctx->set_sim_pin(MBED_CONF_APP_CELLULAR_SIM_PIN);
#ifdef MBED_CONF_APP_APN
ctx->set_credentials(MBED_CONF_APP_APN);
#endif
TEST_ASSERT(ctx->register_to_network() == NSAPI_ERROR_OK);
device = CellularDevice::get_default_instance();
TEST_ASSERT(device != NULL);
}
static bool get_network_registration(CellularNetwork::RegistrationType type,
CellularNetwork::RegistrationStatus &status, bool &is_registered)
{
is_registered = false;
CellularNetwork::registration_params_t reg_params;
nsapi_error_t err = nw->get_registration_params(type, reg_params);
TEST_ASSERT(err == NSAPI_ERROR_OK || err == NSAPI_ERROR_UNSUPPORTED);
status = reg_params._status;
switch (status) {
case CellularNetwork::RegisteredRoaming:
case CellularNetwork::RegisteredHomeNetwork:
is_registered = true;
break;
case CellularNetwork::RegisteredSMSOnlyRoaming:
case CellularNetwork::RegisteredSMSOnlyHome:
case CellularNetwork::RegisteredCSFBNotPreferredRoaming:
case CellularNetwork::RegisteredCSFBNotPreferredHome:
case CellularNetwork::AttachedEmergencyOnly:
case CellularNetwork::RegistrationDenied:
case CellularNetwork::NotRegistered:
case CellularNetwork::Unknown:
case CellularNetwork::SearchingNetwork:
default:
break;
}
return true;
}
static bool is_registered()
{
CellularNetwork::RegistrationStatus status;
bool is_registered = false;
for (int type = 0; type < CellularNetwork::C_MAX; type++) {
if (get_network_registration((CellularNetwork::RegistrationType) type, status, is_registered)) {
if (is_registered) {
break;
}
}
}
return is_registered;
}
static void nw_callback(nsapi_event_t ev, intptr_t intptr)
{
}
static void test_network_registration()
{
device->set_timeout(10 * 1000);
nw = device->open_network();
TEST_ASSERT(nw != NULL);
nw->attach(&nw_callback);
bool success = false;
for (int type = 0; type < CellularNetwork::C_MAX; type++) {
if (!nw->set_registration_urc((CellularNetwork::RegistrationType)type, true)) {
success = true;
}
}
// each modem should support at least one registration type
TEST_ASSERT(success);
int sanity_count = 0;
while (is_registered() == false) {
if (sanity_count == 0) {
TEST_ASSERT(nw->set_registration() == NSAPI_ERROR_OK);
}
sanity_count++;
wait(2);
TEST_ASSERT(sanity_count < 60);
}
// device was registered right away, test set_registration call
if (sanity_count == 0) {
TEST_ASSERT(nw->set_registration() == NSAPI_ERROR_OK);
}
CellularNetwork::NWRegisteringMode reg_mode = CellularNetwork::NWModeDeRegister;
TEST_ASSERT(nw->get_network_registering_mode(reg_mode) == NSAPI_ERROR_OK);
TEST_ASSERT(reg_mode == CellularNetwork::NWModeAutomatic);
}
static void test_attach()
{
wait(10);
TEST_ASSERT(nw->set_attach() == NSAPI_ERROR_OK);
CellularNetwork::AttachStatus status;
TEST_ASSERT(nw->get_attach(status) == NSAPI_ERROR_OK);
TEST_ASSERT(status == CellularNetwork::Attached);
}
static void test_other()
{
const char *devi = CELLULAR_STRINGIFY(CELLULAR_DEVICE);
TEST_ASSERT(nw->get_3gpp_error() == 0);
nsapi_error_t err = nw->set_access_technology(CellularNetwork::RAT_GSM);
TEST_ASSERT(err == NSAPI_ERROR_OK || err == NSAPI_ERROR_UNSUPPORTED);
// scanning of operators requires some delay before operation is allowed(seen with WISE_1570)
wait(5);
// scanning of operators might take a long time
device->set_timeout(240 * 1000);
CellularNetwork::operList_t operators;
int uplinkRate = -1;
TEST_ASSERT(nw->scan_plmn(operators, uplinkRate) == NSAPI_ERROR_OK);
device->set_timeout(10 * 1000);
int rxlev = -1, ber = -1, rscp = -1, ecno = -1, rsrq = -1, rsrp = -1;
err = nw->get_extended_signal_quality(rxlev, ber, rscp, ecno, rsrq, rsrp);
TEST_ASSERT(err == NSAPI_ERROR_OK || err == NSAPI_ERROR_DEVICE_ERROR);
if (err == NSAPI_ERROR_DEVICE_ERROR) {
if (strcmp(devi, "QUECTEL_BG96") != 0 && strcmp(devi, "TELIT_HE910") != 0) {// QUECTEL_BG96 does not give any specific reason for device error
TEST_ASSERT((((AT_CellularNetwork *)nw)->get_device_error().errType == 3) && // 3 == CME error from the modem
((((AT_CellularNetwork *)nw)->get_device_error().errCode == 100) || // 100 == unknown command for modem
(((AT_CellularNetwork *)nw)->get_device_error().errCode == 50))); // 50 == incorrect parameters // seen in wise_1570 for not supported commands
}
} else {
// we should have some values which are not optional
TEST_ASSERT(rxlev >= 0 && ber >= 0 && rscp >= 0 && ecno >= 0 && rsrq >= 0 && rsrp >= 0);
}
int rssi = -1;
ber = -1;
err = nw->get_signal_quality(rssi, ber);
TEST_ASSERT(err == NSAPI_ERROR_OK || err == NSAPI_ERROR_DEVICE_ERROR);
if (err == NSAPI_ERROR_DEVICE_ERROR) {
TEST_ASSERT((((AT_CellularNetwork *)nw)->get_device_error().errType == 3) && // 3 == CME error from the modem
((((AT_CellularNetwork *)nw)->get_device_error().errCode == 100) || // 100 == unknown command for modem
(((AT_CellularNetwork *)nw)->get_device_error().errCode == 50))); // 50 == incorrect parameters // seen in wise_1570 for not supported commands
} else {
// test for values
TEST_ASSERT(rssi >= 0);
TEST_ASSERT(ber >= 0);
}
CellularNetwork::registration_params_t reg_params;
reg_params._cell_id = -5;
TEST_ASSERT(nw->get_registration_params(reg_params) == NSAPI_ERROR_OK);
TEST_ASSERT(reg_params._cell_id != -5);
int format = -1;
CellularNetwork::operator_t operator_params;
// all params are optional so can't test operator_params
err = nw->get_operator_params(format, operator_params);
TEST_ASSERT(err == NSAPI_ERROR_OK);
nsapi_connection_status_t st = nw->get_connection_status();
TEST_ASSERT(st == NSAPI_STATUS_DISCONNECTED);
#ifndef TARGET_UBLOX_C027 // AT command is supported, but excluded as it runs out of memory easily (there can be very many operator names)
if (strcmp(devi, "QUECTEL_BG96") != 0 && strcmp(devi, "SARA4_PPP") != 0) {
// QUECTEL_BG96 timeouts with this one, tested with 3 minute timeout
CellularNetwork::operator_names_list op_names;
err = nw->get_operator_names(op_names);
TEST_ASSERT(err == NSAPI_ERROR_OK || err == NSAPI_ERROR_DEVICE_ERROR);
if (err == NSAPI_ERROR_DEVICE_ERROR) {
// if device error then we must check was that really device error or that modem/network does not support the commands
TEST_ASSERT((((AT_CellularNetwork *)nw)->get_device_error().errType == 3) && // 3 == CME error from the modem
((((AT_CellularNetwork *)nw)->get_device_error().errCode == 4) || // 4 == NOT SUPPORTED BY THE MODEM
(((AT_CellularNetwork *)nw)->get_device_error().errCode == 50))); // 50 == incorrect parameters // seen in wise_1570 for not supported commands
} else {
CellularNetwork::operator_names_t *opn = op_names.get_head();
TEST_ASSERT(strlen(opn->numeric) > 0);
TEST_ASSERT(strlen(opn->alpha) > 0);
}
}
#endif
// TELIT_HE910 and QUECTEL_BG96 just gives an error and no specific error number so we can't know is this real error or that modem/network does not support the command
CellularNetwork::Supported_UE_Opt supported_opt = CellularNetwork::SUPPORTED_UE_OPT_MAX;
CellularNetwork::Preferred_UE_Opt preferred_opt = CellularNetwork::PREFERRED_UE_OPT_MAX;
err = nw->get_ciot_optimization_config(supported_opt, preferred_opt);
TEST_ASSERT(err == NSAPI_ERROR_OK || err == NSAPI_ERROR_DEVICE_ERROR);
if (err == NSAPI_ERROR_DEVICE_ERROR) {
// if device error then we must check was that really device error or that modem/network does not support the commands
if (!(strcmp(devi, "TELIT_HE910") == 0 || strcmp(devi, "QUECTEL_BG96") == 0 || strcmp(devi, "SARA4_PPP") == 0)) {
TEST_ASSERT((((AT_CellularNetwork *)nw)->get_device_error().errType == 3) && // 3 == CME error from the modem
((((AT_CellularNetwork *)nw)->get_device_error().errCode == 100) || // 100 == unknown command for modem
(((AT_CellularNetwork *)nw)->get_device_error().errCode == 50))); // 50 == incorrect parameters // seen in wise_1570 for not supported commands
}
} else {
TEST_ASSERT(supported_opt != CellularNetwork::SUPPORTED_UE_OPT_MAX);
TEST_ASSERT(preferred_opt != CellularNetwork::PREFERRED_UE_OPT_MAX);
}
err = nw->set_ciot_optimization_config(supported_opt, preferred_opt);
TEST_ASSERT(err == NSAPI_ERROR_OK || err == NSAPI_ERROR_DEVICE_ERROR);
if (err == NSAPI_ERROR_DEVICE_ERROR) {
// if device error then we must check was that really device error or that modem/network does not support the commands
if (!(strcmp(devi, "TELIT_HE910") == 0 || strcmp(devi, "QUECTEL_BG96") == 0 || strcmp(devi, "SARA4_PPP") == 0)) {
TEST_ASSERT((((AT_CellularNetwork *)nw)->get_device_error().errType == 3) && // 3 == CME error from the modem
((((AT_CellularNetwork *)nw)->get_device_error().errCode == 100) || // 100 == unknown command for modem
(((AT_CellularNetwork *)nw)->get_device_error().errCode == 50))); // 50 == incorrect parameters // seen in wise_1570 for not supported commands
}
}
}
static void test_detach()
{
// in PPP mode there is NO CARRIER waiting so flush it out
rtos::ThisThread::sleep_for(6 * 1000);
((AT_CellularNetwork *)nw)->get_at_handler().flush();
nsapi_connection_status_t st = nw->get_connection_status();
TEST_ASSERT(st == NSAPI_STATUS_DISCONNECTED);
TEST_ASSERT(nw->detach() == NSAPI_ERROR_OK);
// wait to process URC's, received after detach
rtos::ThisThread::sleep_for(500);
st = nw->get_connection_status();
TEST_ASSERT(st == NSAPI_STATUS_DISCONNECTED);
}
using namespace utest::v1;
static utest::v1::status_t greentea_failure_handler(const Case *const source, const failure_t reason)
{
greentea_case_failure_abort_handler(source, reason);
return STATUS_ABORT;
}
static Case cases[] = {
Case("CellularNetwork init", init_network_interface, greentea_failure_handler),
Case("CellularNetwork test registering", test_network_registration, greentea_failure_handler),
Case("CellularNetwork test attach", test_attach, greentea_failure_handler),
Case("CellularNetwork test other functions", test_other, greentea_failure_handler),
Case("CellularNetwork test detach", test_detach, greentea_failure_handler)
};
static utest::v1::status_t test_setup(const size_t number_of_cases)
{
GREENTEA_SETUP(10 * 60, "default_auto");
return verbose_test_setup_handler(number_of_cases);
}
static Specification specification(test_setup, cases);
int main()
{
#if MBED_CONF_MBED_TRACE_ENABLE
trace_open();
#endif
int ret = Harness::run(specification);
#if MBED_CONF_MBED_TRACE_ENABLE
trace_close();
#endif
return ret;
}
Reference in New Issue View Git Blame Copy Permalink