mbed-os/nanostack/ws_management_api.h

621 lines
19 KiB
C

/*
* Copyright (c) 2018-2019, Arm Limited and affiliates.
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/**
* \file ws_management_if.h
* \brief Wi-SUN management interface.
*
* This interface is used for configuring Wi-SUN devices.
* After creating the Wi-SUN interface, you can use this interface to configure the Wi-SUN device
* behaviour. When you are done with the configurations, you need to call interface up to enable a Wi-SUN node.
*
*/
#ifndef WS_MANAGEMENT_API_H_
#define WS_MANAGEMENT_API_H_
#include "ns_types.h"
#include "net_interface.h" /* Declaration for channel_list_s. */
#ifdef __cplusplus
extern "C" {
#endif
/* Regulatory domain values*/
#define REG_DOMAIN_WW 0x00 // World wide
#define REG_DOMAIN_NA 0x01 // North America
#define REG_DOMAIN_JP 0x02 // Japan
#define REG_DOMAIN_EU 0x03 // European Union
#define REG_DOMAIN_CH 0x04 // China
#define REG_DOMAIN_IN 0x05 // India
#define REG_DOMAIN_MX 0x06 //
#define REG_DOMAIN_BZ 0x07 // Brazil
#define REG_DOMAIN_AZ 0x08 // Australia
#define REG_DOMAIN_NZ 0x08 // New zealand
#define REG_DOMAIN_KR 0x09 // Korea
#define REG_DOMAIN_PH 0x0A //
#define REG_DOMAIN_MY 0x0B //
#define REG_DOMAIN_HK 0x0C //
#define REG_DOMAIN_SG 0x0D // band 866-869
#define REG_DOMAIN_TH 0x0E //
#define REG_DOMAIN_VN 0x0F //
#define REG_DOMAIN_SG_H 0x10 // band 920-925
#define OPERATING_MODE_1a 0x1a
#define OPERATING_MODE_1b 0x1b
#define OPERATING_MODE_2a 0x2a
#define OPERATING_MODE_2b 0x2b
#define OPERATING_MODE_3 0x03
#define OPERATING_MODE_4a 0x4a
#define OPERATING_MODE_4b 0x4b
#define OPERATING_MODE_5 0x05
#define CHANNEL_FUNCTION_FIXED 0x00 // Fixed channel
#define CHANNEL_FUNCTION_TR51CF 0x01 // TR51CF
#define CHANNEL_FUNCTION_DH1CF 0x02 // Direct Hash
#define CHANNEL_FUNCTION_VENDOR_DEFINED 0x03 // vendor given channel hop schedule
#define CHANNEL_SPACING_200 0x00 // 200 khz
#define CHANNEL_SPACING_400 0x01 // 400 khz
#define CHANNEL_SPACING_600 0x02 // 600 khz
#define CHANNEL_SPACING_100 0x03 // 100 khz
#define CHANNEL_SPACING_250 0x04 // 250 khz
/*
* Network Size definitions are device amount in hundreds of devices.
* These definitions are meant to give some estimates of sizes. Any value can be given as parameter
*/
#define NETWORK_SIZE_CERTIFICATE 0x00 // Network configuration used in Wi-SUN certification
#define NETWORK_SIZE_SMALL 0x01 // Small networks
#define NETWORK_SIZE_MEDIUM 0x08 // 100 - 800 device networks are medium sized
#define NETWORK_SIZE_LARGE 0x0F // 800 - 1500 device networks are large
#define NETWORK_SIZE_XLARGE 0x19 // 2500+ devices
#define NETWORK_SIZE_AUTOMATIC 0xFF
/** Temporary API change flag. this will be removed when new version of API is implemented on applications
*
*/
#define WS_MANAGEMENT_API_VER_2
/**
* \brief Struct ws_statistics defines the Wi-SUN statistics storage structure.
*/
typedef struct ws_statistics {
/** Asynch TX counter */
uint32_t asynch_tx_count;
/** Asynch RX counter */
uint32_t asynch_rx_count;
} ws_statistics_t;
/**
* \brief Struct ws_info defines the Wi-SUN stack state.
*/
typedef struct ws_stack_info {
/** Parent link local address */
uint8_t parent[16];
/** parent RSSI Out measured RSSI value calculated using EWMA specified by Wi-SUN from range of -174 (0) to +80 (254) dBm.*/
uint8_t rsl_out;
/** parent RSSI in measured RSSI value calculated using EWMA specified by Wi-SUN from range of -174 (0) to +80 (254) dBm.*/
uint8_t rsl_in;
/** ETX To border router */
uint16_t routing_cost;
/** Network PAN ID */
uint16_t pan_id;
/** Wi-SUN join state defined by Wi-SUN specification 1-5*/
uint8_t join_state;
} ws_stack_info_t;
/**
* Initialize Wi-SUN stack.
*
* Generates the default configuration for Wi-SUN operation
*
* \param interface_id Network interface ID.
* \param regulatory_domain Mandatory regulatory domain value of the device.
* \param network_name_ptr Network name where to join if no configuration found from storage.
* \param fhss_timer_ptr FHSS functions for timer adaptation to platform.
*
* \return 0, Init OK.
* \return <0 Init fail.
*/
int ws_management_node_init(
int8_t interface_id,
uint8_t regulatory_domain,
char *network_name_ptr,
fhss_timer_t *fhss_timer_ptr);
/**
* Change the network name
*
* Change the network name dynamically at a runtime.
* If stack is running the network discovery is restarted.
*
* \param interface_id Network interface ID.
* \param network_name_ptr Nul terminated Network name limited to 32 characters.
*
* \return 0, Init OK.
* \return <0 Init fail.
*/
int ws_management_network_name_set(
int8_t interface_id,
char *network_name_ptr);
/**
* Get the network name
*
* \param interface_id Network interface ID.
* \param network_name_ptr Nul terminated Network name limited to 32 characters.
*
* \return 0, OK.
* \return <0 Fail.
*/
int ws_management_network_name_get(
int8_t interface_id,
char *network_name_ptr);
/**
* Validate the network name
*
* \param interface_id Network interface ID.
* \param network_name_ptr Nul terminated Network name limited to 32 characters.
*
* \return 0, OK.
* \return <0 Fail.
*/
int ws_management_network_name_validate(
int8_t interface_id,
char *network_name_ptr);
/**
* Configure regulatory domain of Wi-SUN stack.
*
* Change the default configuration for Wi-SUN PHY operation.
*
* Supported values:
* Domain: "NA"(0x01), "KR"(0x09), "EU"(0x03), "IN"(0x05), "KR"(0x09), "JP"(0x09), "WW"(0x00)
* Operating class: (1), (2), (3), (4)
* Operation mode: "1a" (symbol rate 50, modulation index 0.5)
* "1b" (symbol rate 50, modulation index 1.0)
* "2a" (symbol rate 100, modulation index 0.5)
* "2b" (symbol rate 100, modulation index 1.0)
* "3" (symbol rate 150, modulation index 0.5)
* "4a" (symbol rate 200, modulation index 0.5)
* "4b" (symbol rate 200, modulation index 1.0)
* "5" (symbol rate 300, modulation index 0.5)
*
* if value of 255 is given then previous value is used.
*
* \param interface_id Network interface ID.
* \param regulatory_domain FHSS regulatory domain. Default to "EU" 0x03.
* \param operating_class FHSS operating class. Default to 2.
* \param operating_mode FHSS phy operating mode. Default to "3".
*
* \return 0, Init OK.
* \return <0 Init fail.
*/
int ws_management_regulatory_domain_set(
int8_t interface_id,
uint8_t regulatory_domain,
uint8_t operating_class,
uint8_t operating_mode);
/**
* Get regulatory domain of Wi-SUN stack.
*
* \param interface_id Network interface ID.
* \param regulatory_domain FHSS regulatory domain.
* \param operating_class FHSS operating class.
* \param operating_mode FHSS phy operating mode.
*
* \return 0, OK.
* \return <0 Fail.
*/
int ws_management_regulatory_domain_get(
int8_t interface_id,
uint8_t *regulatory_domain,
uint8_t *operating_class,
uint8_t *operating_mode);
/**
* Validate regulatory domain of Wi-SUN stack.
*
* \param interface_id Network interface ID.
* \param regulatory_domain FHSS regulatory domain.
* \param operating_class FHSS operating class.
* \param operating_mode FHSS phy operating mode.
*
* \return 0, OK.
* \return <0 Fail.
*/
int ws_management_regulatory_domain_validate(
int8_t interface_id,
uint8_t regulatory_domain,
uint8_t operating_class,
uint8_t operating_mode);
/**
* Set timing parameters related to network size.
*
* timing parameters follows the specification example from Wi-SUN specification
*
* Default value: medium 100 - 800 device
* small network size: less than 100 devices
* Large network size: 800 - 1500 devices
* automatic: when discovering the network network size is learned
* from advertisements and timings adjusted accordingly
*
* When network size is changed, it will override following configuration values:
* - Timing settings set by ws_management_timing_parameters_set()
* - RPL settings set by ws_bbr_rpl_parameters_set()
*
* If values should be other than defaults set by stack, they need to set using
* above function calls after network size change.
*
* \param interface_id Network interface ID.
* \param network_size Network size in hundreds of devices, certificate or automatic.
* See NETWORK_SIZE_ definition.
*
* \return 0, Init OK.
* \return <0 Init fail.
*/
int ws_management_network_size_set(
int8_t interface_id,
uint8_t network_size);
/**
* Get timing parameters related to network size.
*
* \param interface_id Network interface ID.
* \param network_size Network size in hundreds of devices, certificate or automatic.
* See NETWORK_SIZE_ definition.
*
* \return 0, OK.
* \return <0 Fail.
*/
int ws_management_network_size_get(
int8_t interface_id,
uint8_t *network_size);
/**
* Validate timing parameters related to network size.
*
* \param interface_id Network interface ID.
* \param network_size Network size in hundreds of devices, certificate or automatic.
* See NETWORK_SIZE_ definition.
*
* \return 0, OK.
* \return <0 Fail.
*/
int ws_management_network_size_validate(
int8_t interface_id,
uint8_t network_size);
/**
* Set channel mask for FHSS operation.
*
* Default value: all channels are allowed.
*
* \param interface_id Network interface ID.
* \param channel_mask set bits matching the channel 1 to allow channel 0 to disallow.
*
* \return 0, Init OK.
* \return <0 Init fail.
*/
int ws_management_channel_mask_set(
int8_t interface_id,
uint32_t channel_mask[8]);
/**
* Get channel mask for FHSS operation.
*
* \param interface_id Network interface ID.
* \param channel_mask set bits matching the channel 1 to allow channel 0 to disallow.
*
* \return 0, OK.
* \return <0 Fail.
*/
int ws_management_channel_mask_get(
int8_t interface_id,
uint32_t *channel_mask);
/**
* Validate channel mask for FHSS operation.
*
* \param interface_id Network interface ID.
* \param channel_mask set bits matching the channel 1 to allow channel 0 to disallow.
*
* \return 0, OK.
* \return <0 Fail.
*/
int ws_management_channel_mask_validate(
int8_t interface_id,
uint32_t channel_mask[8]);
/**
* Configure Application defined channel plan.
*
* Change the application defined channel plan.
* This changes our channel plan that is reported to our children.
* PHY driver must be configured to follow these settings to make the configuration active.
*
*
* \param interface_id Network interface ID.
* \param channel_plan Channel plan must be 1 application defined if deviating from regulatory domain (0).
* \param uc_channel_function 0: Fixed channel, 1:TR51CF, 2: Direct Hash, 3: Vendor defined.
* \param bc_channel_function 0: Fixed channel, 1:TR51CF, 2: Direct Hash, 3: Vendor defined.
* \param ch0_freq ch0 center frequency.
* \param channel_spacing Channel spacing value 0:200k, 1:400k, 2:600k, 3:100k.
* \param number_of_channels FHSS phy operating mode default to "1b".
*
* \return 0, Init OK.
* \return <0 Init fail.
*/
int ws_management_channel_plan_set(
int8_t interface_id,
uint8_t channel_plan,
uint8_t uc_channel_function,
uint8_t bc_channel_function,
uint32_t ch0_freq, // Stack can not modify this
uint8_t channel_spacing,// Stack can not modify this
uint8_t number_of_channels);// Stack can not modify this
/**
* Configure timing values for FHSS.
*
* Change the default configuration for Wi-SUN FHSS operation.
*
*
* \param interface_id Network interface ID.
* \param fhss_uc_dwell_interval default to 250 ms.
* \param fhss_broadcast_interval default to 800 ms.
* \param fhss_bc_dwell_interval default to 200 ms.
*
* \return 0, Init OK.
* \return <0 Init fail.
*/
int ws_management_fhss_timing_configure(
int8_t interface_id,
uint8_t fhss_uc_dwell_interval,
uint32_t fhss_broadcast_interval,
uint8_t fhss_bc_dwell_interval);
/**
* Configure unicast channel function.
*
* Change the default configuration for Wi-SUN FHSS operation.
* if application defined is used the behaviour is undefined
*
*
* \param interface_id Network interface ID.
* \param channel_function Unicast channel function.
* \param fixed_channel Used channel when channel function is fixed channel.
* \param dwell_interval Used dwell interval when channel function is TR51 or DH1.
*
* \return 0, Init OK.
* \return <0 Init fail.
*/
int ws_management_fhss_unicast_channel_function_configure(
int8_t interface_id,
uint8_t channel_function,
uint16_t fixed_channel,
uint8_t dwell_interval);
/**
* Get unicast channel function.
*
* \param interface_id Network interface ID.
* \param channel_function Unicast channel function.
* \param fixed_channel Used channel when channel function is fixed channel.
* \param dwell_interval Used dwell interval when channel function is TR51 or DH1.
*
* \return 0, OK.
* \return <0 fail.
*/
int ws_management_fhss_unicast_channel_function_get(
int8_t interface_id,
uint8_t *channel_function,
uint16_t *fixed_channel,
uint8_t *dwell_interval);
/**
* Validate unicast channel function.
*
* \param interface_id Network interface ID.
* \param channel_function Unicast channel function.
* \param fixed_channel Used channel when channel function is fixed channel.
* \param dwell_interval Used dwell interval when channel function is TR51 or DH1.
*
* \return 0, OK.
* \return <0 fail.
*/
int ws_management_fhss_unicast_channel_function_validate(
int8_t interface_id,
uint8_t channel_function,
uint16_t fixed_channel,
uint8_t dwell_interval);
/**
* Configure broadcast channel function.
*
* Change the default configuration for Wi-SUN FHSS operation.
* if application defined is used the behaviour is undefined
*
*
* \param interface_id Network interface ID.
* \param channel_function Broadcast channel function.
* \param fixed_channel Used channel when channel function is fixed channel.
* \param dwell_interval Broadcast channel dwell interval.
* \param broadcast_interval Broadcast interval.
*
* \return 0, Init OK.
* \return <0 Init fail.
*/
int ws_management_fhss_broadcast_channel_function_configure(
int8_t interface_id,
uint8_t channel_function,
uint16_t fixed_channel,
uint8_t dwell_interval,
uint32_t broadcast_interval);
/**
* Get broadcast channel function.
*
* \param interface_id Network interface ID.
* \param channel_function Broadcast channel function.
* \param fixed_channel Used channel when channel function is fixed channel.
* \param dwell_interval Broadcast channel dwell interval.
* \param broadcast_interval Broadcast interval.
*
* \return 0, OK.
* \return <0 Fail.
*/
int ws_management_fhss_broadcast_channel_function_get(
int8_t interface_id,
uint8_t *channel_function,
uint16_t *fixed_channel,
uint8_t *dwell_interval,
uint32_t *broadcast_interval);
/**
* Validate broadcast channel function.
*
* \param interface_id Network interface ID.
* \param channel_function Broadcast channel function.
* \param fixed_channel Used channel when channel function is fixed channel.
* \param dwell_interval Broadcast channel dwell interval.
* \param broadcast_interval Broadcast interval.
*
* \return 0, OK.
* \return <0 Fail.
*/
int ws_management_fhss_broadcast_channel_function_validate(
int8_t interface_id,
uint8_t channel_function,
uint16_t fixed_channel,
uint8_t dwell_interval,
uint32_t broadcast_interval);
/**
* Set timing parameters
*
* Sets the parameters for the PAN discovery trickle timer and PAN timeout.
*
* When network size is changed using ws_management_network_size_set(),
* it will override the configuration values set by this function.
*
* \param interface_id Network interface ID.
* \param disc_trickle_imin Discovery trickle Imin
* \param disc_trickle_imax Discovery trickle Imax.
* \param disc_trickle_k Discovery trickle k.
* \param pan_timeout PAN timeout.
*
* \return 0, Init OK.
* \return <0 Init fail.
*/
int ws_management_timing_parameters_set(
int8_t interface_id,
uint16_t disc_trickle_imin,
uint16_t disc_trickle_imax,
uint8_t disc_trickle_k,
uint16_t pan_timeout);
/**
* Get timing parameters
*
* Gets the parameters for the PAN discovery trickle timer and PAN timeout.
*
* \param interface_id Network interface ID.
* \param disc_trickle_imin Discovery trickle Imin
* \param disc_trickle_imax Discovery trickle Imax.
* \param disc_trickle_k Discovery trickle k.
* \param pan_timeout PAN timeout.
*
* \return 0, Init OK.
* \return <0 Init fail.
*/
int ws_management_timing_parameters_get(
int8_t interface_id,
uint16_t *disc_trickle_imin,
uint16_t *disc_trickle_imax,
uint8_t *disc_trickle_k,
uint16_t *pan_timeout);
/**
* Validate timing parameters
*
* Validates the parameters for the PAN discovery trickle timer and PAN timeout.
*
* \param interface_id Network interface ID.
* \param disc_trickle_imin Discovery trickle Imin
* \param disc_trickle_imax Discovery trickle Imax.
* \param disc_trickle_k Discovery trickle k.
* \param pan_timeout PAN timeout.
*
* \return 0, Init OK.
* \return <0 Init fail.
*/
int ws_management_timing_parameters_validate(
int8_t interface_id,
uint16_t disc_trickle_imin,
uint16_t disc_trickle_imax,
uint8_t disc_trickle_k,
uint16_t pan_timeout);
/**
* Start collecting Wi-SUN statistics.
*
* \param interface_id Network interface ID.
* \param stats_ptr Pointer to stored statistics.
*
* \return 0 Success.
* \return <0 Failure.
*/
int ws_statistics_start(
int8_t interface_id,
ws_statistics_t *stats_ptr);
/**
* Stop collecting Wi-SUN statistics.
*
* \param interface_id Network interface ID.
*
* \return 0 Success.
* \return <0 Failure.
*/
int ws_statistics_stop(
int8_t interface_id);
/**
* Get information from the stack state.
* Parent information and link qualities with stack state info
*
* \param interface_id Network interface ID.
* \param info_ptr Pointer to stored stack state.
*
* \return 0 Success.
* \return <0 Failure.
*/
int ws_stack_info_get(
int8_t interface_id,
ws_stack_info_t *info_ptr);
#ifdef __cplusplus
}
#endif
#endif /* WS_MANAGEMENT_API_H_ */