mbed-os/features/nanostack/sal-stack-nanostack/source/6LoWPAN/ws/ws_common_defines.h

397 lines
14 KiB
C

/*
* Copyright (c) 2018-2019, Arm Limited and affiliates.
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef WS_COMMON_DEFINES_H_
#define WS_COMMON_DEFINES_H_
#define WH_IE_ELEMENT_HEADER_LENGTH 3
/* Header IE Sub elements */
#define WH_IE_UTT_TYPE 1 /**< Unicast Timing and Frame type information */
#define WH_IE_BT_TYPE 2 /**< Broadcast timing information */
#define WH_IE_FC_TYPE 3 /**< Flow Control for Extended Direct Frame Exchange */
#define WH_IE_RSL_TYPE 4 /**< Received Signal Level information */
#define WH_IE_MHDS_TYPE 5 /**< MHDS information for mesh routing */
#define WH_IE_VH_TYPE 6 /**< Vendor header information */
#define WH_IE_EA_TYPE 9 /**< Eapol Auhtenticator EUI-64 header information */
#define WS_WP_NESTED_IE 4 /**< WS nested Payload IE element'selement could include mltiple sub payload IE */
#define WS_WP_SUB_IE_ELEMENT_HEADER_LENGTH 2
/* Payload IE sub elements in side WS_WP_NESTED_IE */
#define WP_PAYLOAD_IE_US_TYPE 1 /**< Unicast Schedule information */
#define WP_PAYLOAD_IE_BS_TYPE 2 /**< Broadcast Schedule information */
#define WP_PAYLOAD_IE_VP_TYPE 3 /**< Vendor Payload information */
#define WP_PAYLOAD_IE_PAN_TYPE 4 /**< PAN Information */
#define WP_PAYLOAD_IE_NETNAME_TYPE 5 /**< Network Name information */
#define WP_PAYLOAD_IE_PAN_VER_TYPE 6 /**< Pan configuration version */
#define WP_PAYLOAD_IE_GTKHASH_TYPE 7 /**< GTK Hash information */
/* WS frame types to WH_IE_UTT_TYPE */
#define WS_FT_PAN_ADVERT 0 /**< PAN Advert */
#define WS_FT_PAN_ADVERT_SOL 1 /**< PAN Advert Solicit */
#define WS_FT_PAN_CONF 2 /**< PAN Config */
#define WS_FT_PAN_CONF_SOL 3 /**< PAN Config Solicit */
#define WS_FT_DATA 4 /**< data type inside MPX */
#define WS_FT_ACK 5 /**< Enhanced ACK */
#define WS_FT_EAPOL 6 /**< EAPOL message inside MPX */
/* WS exluded channel Control */
#define WS_EXC_CHAN_CTRL_NONE 0 /**< No excluded channels */
#define WS_EXC_CHAN_CTRL_RANGE 1 /**< Excluded channels are in 1 or multiple channel range */
#define WS_EXC_CHAN_CTRL_BITMASK 2 /**< Excluded channels are marked to bitmask which length based on configured channels */
#define WS_EXCLUDED_MAX_RANGE_TO_SEND 3
/**
* @brief ws_pan_information_t PAN information
*/
typedef struct ws_pan_information_s {
uint16_t pan_size; /**< Number devices connected to Border Router. */
uint16_t routing_cost; /**< ETX to border Router. */
uint16_t pan_version; /**< Pan configuration version will be updatd by Border router at PAN. */
bool use_parent_bs: 1; /**< 1 for force to follow parent broadcast schedule. 0 node may define own schedule. */
bool rpl_routing_method: 1; /**< 1 when RPL routing is selected and 0 when L2 routing. */
bool pan_version_set: 1; /**< 1 PAN version is set. */
unsigned version: 3; /**< Pan version support. */
} ws_pan_information_t;
/**
* @brief ws_excluded_channel_range_data_t Excludd Chanel range information
*/
typedef struct ws_excluded_channel_range_data_s {
uint16_t range_start;
uint16_t range_end;
} ws_excluded_channel_range_data_t;
/**
* @brief ws_excluded_channel_data_t Excludd Chanel information
*/
typedef struct ws_excluded_channel_data_s {
unsigned excuded_channel_ctrl: 2;
unsigned excluded_range_length: 3;
ws_excluded_channel_range_data_t exluded_range[WS_EXCLUDED_MAX_RANGE_TO_SEND];
uint16_t excluded_channel_count;
uint8_t channel_mask_bytes_inline;
uint32_t channel_mask[8];
} ws_excluded_channel_data_t;
/**
* @brief ws_hopping_schedule_t Chanel hopping schedule information
*/
typedef struct ws_hopping_schedule_s {
uint8_t fhss_uc_dwell_interval;
uint8_t fhss_bc_dwell_interval;
uint8_t regulatory_domain; /**< PHY regulatory domain default to "KR" 0x09 */
uint8_t operating_class; /**< PHY operating class default to 1 */
uint8_t operating_mode; /**< PHY operating mode default to "1b" symbol rate 50, modulation index 1 */
uint8_t phy_mode_id; /**< PHY mode ID, default to 255 */
uint8_t channel_plan_id; /**< Channel plan ID, default to 255 */
uint8_t channel_plan; /**< 0: use regulatory domain values 1: application defined plan */
uint8_t uc_channel_function; /**< 0: Fixed channel, 1:TR51CF, 2: Direct Hash, 3: Vendor defined */
uint8_t bc_channel_function; /**< 0: Fixed channel, 1:TR51CF, 2: Direct Hash, 3: Vendor defined */
uint8_t channel_spacing; /**< derived from regulatory domain. 0:200k, 1:400k, 2:600k, 3:100k */
uint8_t number_of_channels; /**< derived from regulatory domain */
uint8_t clock_drift;
uint8_t timing_accurancy;
uint16_t uc_fixed_channel;
uint16_t bc_fixed_channel;
uint16_t fhss_bsi;
uint32_t fhss_broadcast_interval;
uint_fast24_t ch0_freq; // Default should be derived from regulatory domain
ws_excluded_channel_data_t excluded_channels;
} ws_hopping_schedule_t;
/**
* @brief ws_utt_ie_t WS UTT-IE
*/
typedef struct ws_utt_ie {
uint8_t message_type;
uint_fast24_t ufsi;
} ws_utt_ie_t;
/**
* @brief ws_bt_ie_t WS BT-IE read
*/
typedef struct ws_bt_ie {
uint16_t broadcast_slot_number;
uint_fast24_t broadcast_interval_offset;
} ws_bt_ie_t;
/**
* @brief ws_fc_ie_t WS FC-IE element
*/
typedef struct ws_fc_ie {
uint8_t tx_flow_ctrl;
uint8_t rx_flow_ctrl;
} ws_fc_ie_t;
/**
* @brief ws_channel_plan_zero_t WS channel plan 0 define domain and class
*/
typedef struct ws_channel_plan_zero {
uint8_t regulator_domain;
uint8_t operation_class;
} ws_channel_plan_zero_t;
/**
* @brief ws_channel_plan_one_t WS channel plan 1 define ch0, spasing and channel count
*/
typedef struct ws_channel_plan_one {
uint_fast24_t ch0;
unsigned channel_spacing: 4;
uint16_t number_of_channel;
} ws_channel_plan_one_t;
/**
* @brief ws_channel_function_zero_t WS function 0 fixed channel
*/
typedef struct ws_channel_function_zero {
uint16_t fixed_channel;
} ws_channel_function_zero_t;
/**
* @brief ws_channel_function_three_t WS function 3 vendor spesific channel hop
*/
typedef struct ws_channel_function_three {
uint8_t channel_hop_count;
uint8_t *channel_list;
} ws_channel_function_three_t;
/**
* @brief ws_excluded_channel_range_t WS excluded channel range
*/
typedef struct ws_excluded_channel_range {
uint8_t number_of_range;
uint8_t *range_start;
} ws_excluded_channel_range_t;
/**
* @brief ws_excluded_channel_mask_t WS excluded channel mask
*/
typedef struct ws_excluded_channel_mask {
uint8_t *channel_mask;
uint8_t mask_len_inline;
} ws_excluded_channel_mask_t;
/**
* @brief ws_us_ie_t WS US-IE read
*/
typedef struct ws_us_ie {
uint8_t dwell_interval;
uint8_t clock_drift;
uint8_t timing_accurancy;
unsigned channel_plan: 3;
unsigned channel_function: 3;
unsigned excluded_channel_ctrl: 2;
union {
ws_channel_plan_zero_t zero;
ws_channel_plan_one_t one;
} plan;
union {
ws_channel_function_zero_t zero;
ws_channel_function_three_t three;
} function;
union {
ws_excluded_channel_range_t range;
ws_excluded_channel_mask_t mask;
} excluded_channels;
} ws_us_ie_t;
/**
* @brief ws_bs_ie_t WS BS-IE read
*/
typedef struct ws_bs_ie {
uint32_t broadcast_interval;
uint16_t broadcast_schedule_identifier;
uint8_t dwell_interval;
uint8_t clock_drift;
uint8_t timing_accurancy;
unsigned channel_plan: 3;
unsigned channel_function: 3;
unsigned excluded_channel_ctrl: 2;
union {
ws_channel_plan_zero_t zero;
ws_channel_plan_one_t one;
} plan;
union {
ws_channel_function_zero_t zero;
ws_channel_function_three_t three;
} function;
} ws_bs_ie_t;
#define MPX_KEY_MANAGEMENT_ENC_USER_ID 0x0001 /**< MPX Key management user ID */
#define MPX_LOWPAN_ENC_USER_ID 0xA0ED /**< MPX Lowpan User Id */
/*
* Wi-SUN MPX MTU size
*
*/
#define WS_MPX_MAX_MTU 1576
#define WS_FAN_VERSION_1_0 1
#define WS_NEIGHBOR_LINK_TIMEOUT 2200
#define WS_NEIGHBOUR_TEMPORARY_NEIGH_MAX_LIFETIME 240
#define WS_NEIGHBOUR_TEMPORARY_ENTRY_LIFETIME 5
#define WS_NEIGHBOUR_DHCP_ENTRY_LIFETIME 60
#define WS_NEIGHBOR_TEMPORARY_LINK_MIN_TIMEOUT_LARGE 520
#define WS_NEIGHBOR_TEMPORARY_LINK_MIN_TIMEOUT_SMALL 260
#define WS_NEIGHBOR_NUD_TIMEOUT WS_NEIGHBOR_LINK_TIMEOUT / 2
#define WS_EAPOL_TEMPORARY_ENTRY_SMALL_TIMEOUT 330
#define WS_EAPOL_TEMPORARY_ENTRY_MEDIUM_TIMEOUT WS_EAPOL_TEMPORARY_ENTRY_SMALL_TIMEOUT
#define WS_EAPOL_TEMPORARY_ENTRY_LARGE_TIMEOUT 750
#define WS_NEIGHBOR_ETX_SAMPLE_MAX 3
#define WS_NEIGHBOR_FIRST_ETX_SAMPLE_MIN_COUNT 3 //This can't be bigger than WS_NEIGHBOR_ETX_SAMPLE_MAX
#define WS_SMALL_PROBE_INIT_BASE_SECONDS 4
#define WS_NORMAL_PROBE_INIT_BASE_SECONDS 8
#define WS_NUD_RAND_PROBABILITY 1
#define WS_NUD_RANDOM_SAMPLE_LENGTH WS_NEIGHBOR_NUD_TIMEOUT / 2
#define WS_NUD_RANDOM_COMPARE (WS_NUD_RAND_PROBABILITY*WS_NUD_RANDOM_SAMPLE_LENGTH) / 100
#define WS_ETX_MIN_SAMPLE_COUNT 4
#define WS_ETX_MAX_UPDATE 1024
#define WS_ETX_MAX 1024
#define WS_ETX_MIN_WAIT_TIME 60
#define WS_ETX_BAD_INIT_LINK_LEVEL 3 //3 or higher attempt count will be dropped
#define WS_ETX_MAX_BAD_LINK_DROP 2 //Drop 2 bad link from init 3
#define WS_RPL_PARENT_CANDIDATE_MAX 5
#define WS_RPL_SELECTED_PARENT_MAX 2
#define WS_CERTIFICATE_RPL_PARENT_CANDIDATE_MAX 8
#define WS_CERTIFICATE_RPL_SELECTED_PARENT_MAX 4
/**
* Wi-sun spesific non-preferred prefix policy label
*/
#define WS_NON_PREFFRED_LABEL 36
/*
* Threshold (referenced to DEVICE_MIN_SENS) above which a neighbor node may be considered for inclusion into candidate parent set
*/
#define CAND_PARENT_THRESHOLD 10
/*
* Hysteresis factor to be applied to CAND_PARENT_THRESHOLD when admitting or dropping nodes from the candidate parent set.
*/
#define CAND_PARENT_HYSTERISIS 3
/*
* value when send the first RPL DIS in 100ms ticks. Value is randomized between timeout/2 - timeout
*/
#define WS_RPL_DIS_INITIAL_TIMEOUT 600
/*
* value when send subsequent RPL DIS in 100 ms tics. Value is randomized between timeout/2 - timeout
*/
#define WS_RPL_DIS_TIMEOUT 1800
/*
* MAC Ack wait duration in symbols. 2-FSK modulation used -> 1 bit per symbol.
*/
#define WS_ACK_WAIT_SYMBOLS 800
/*
* Tack max time in milliseconds.
*/
#define WS_TACK_MAX_MS 5
/* WS requires at least 19 MAC retransmissions (total 1+19=20 attempts). Default 802.15.4 macMaxFrameRetries is 3 (total 1+3=4 attempts).
* At least 4 request restarts must be used: (Initial channel + WS_TX_REQUEST_RESTART_MAX) * MAC attempts = (1+4)*4=20 attempts
*
* Valid settings could be for example:
* WS_MAX_FRAME_RETRIES WS_TX_REQUEST_RESTART_MAX Total attempts
* 0 19 1+0*1+19=20
* 1 9 1+1*1+9=20
* 2 6 1+2*1+6=21
* 3 4 1+3*1+4=20
*
*/
// This configuration is used when bootstrap is ready
#define WS_MAX_FRAME_RETRIES 3
// This configuration is used during bootstrap
#define WS_MAX_FRAME_RETRIES_BOOTSTRAP 0
// Configuring data request restart allows MAC to push failed packet back to MAC TX queue up to WS_CCA_REQUEST_RESTART_MAX times for CCA failure and WS_TX_REQUEST_RESTART_MAX for TX failure.
// Packet cannot be taken back to transmission before it has finished the blacklist period.
#define WS_CCA_REQUEST_RESTART_MAX 9
#define WS_TX_REQUEST_RESTART_MAX 4
#define WS_TX_REQUEST_RESTART_MAX_BOOTSTRAP 19
#define WS_REQUEST_RESTART_BLACKLIST_MIN 20
#define WS_REQUEST_RESTART_BLACKLIST_MAX 300
#if (1 + WS_MAX_FRAME_RETRIES) * (1 + WS_TX_REQUEST_RESTART_MAX) < 20
#warning "MAX frame retries set too low"
#endif
// Total CCA attempts: 1 + WS_MAX_CSMA_BACKOFFS
#define WS_MAX_CSMA_BACKOFFS 0
// Use minimum possible CSMA-CA backoffs
#define WS_MAC_MIN_BE 1
#define WS_MAC_MAX_BE 1
/*
* Automatic CCA threshold: default threshold and range in dBm.
*/
#define CCA_DEFAULT_DBM -60
#define CCA_HIGH_LIMIT -60
#define CCA_LOW_LIMIT -100
/*
* Config new version consistent filter period in 100ms periods
*/
#define WS_CONFIG_CONSISTENT_FILTER_PERIOD 100
// With FHSS we need to check CCA twice on TX channel
#define WS_NUMBER_OF_CSMA_PERIODS 2
// Interval between two CCA checks
#define WS_CSMA_MULTI_CCA_INTERVAL 2000
/* Default FHSS timing information
*
*/
#define WS_FHSS_UC_DWELL_INTERVAL 255;
#define WS_FHSS_BC_INTERVAL 1020;
#define WS_FHSS_BC_DWELL_INTERVAL 255;
/*
* EAPOL relay and PAE authenticator socket settings
*/
#define EAPOL_RELAY_SOCKET_PORT 10253
#define BR_EAPOL_RELAY_SOCKET_PORT 10255
#define PAE_AUTH_SOCKET_PORT 10254
#endif /* WS_COMMON_DEFINES_H_ */