.. |
TARGET_NUCLEO_L011K4
|
STM32L0 assert in SetSysClock replaced
|
2018-08-13 15:55:51 +02:00 |
TARGET_NUCLEO_L031K6
|
[ST]: Fix alignment of execute region to 8-byte boundary in ARM linker files
|
2018-10-09 14:47:14 -05:00 |
TARGET_NUCLEO_L073RZ
|
[ST]: Fix alignment of execute region to 8-byte boundary in ARM linker files
|
2018-10-09 14:47:14 -05:00 |
TARGET_STM32L0x2xZ
|
[ST]: Fix alignment of execute region to 8-byte boundary in ARM linker files
|
2018-10-09 14:47:14 -05:00 |
TARGET_STM32L053x8
|
[ST]: Fix alignment of execute region to 8-byte boundary in ARM linker files
|
2018-10-09 14:47:14 -05:00 |
TARGET_STM32L072xZ
|
DISCO_L072CZ: remove ADC_VBAT pin definition
|
2018-11-20 16:03:12 +01:00 |
device
|
STM32L0 ADC TEMPERATURE CHANNEL rework
|
2019-01-14 13:06:14 +00:00 |
analogin_device.c
|
STM32L0 ADC TEMPERATURE CHANNEL rework
|
2019-01-14 13:06:14 +00:00 |
analogout_device.c
|
TARGET_STM32L0 astyle
|
2018-06-27 14:43:59 +02:00 |
common_objects.h
|
STM32: replace missing #ifdef DEVICE_xxx
|
2019-01-14 13:06:14 +00:00 |
device.h
|
STM32: check for UART ongoing transfers before entering deepsleep
|
2018-08-07 11:30:53 +02:00 |
flash_api.c
|
STM32 L0 & L1: FLASH is EEPROM
|
2019-01-14 13:06:14 +00:00 |
gpio_irq_device.c
|
STM32: move pin_lines_desc to c file
|
2017-02-16 19:34:11 +01:00 |
gpio_irq_device.h
|
STM32: move pin_lines_desc to c file
|
2017-02-16 19:34:11 +01:00 |
i2c_device.h
|
Don't use define checks on DEVICE_FOO macros (partner code)
|
2019-01-14 13:06:14 +00:00 |
pin_device.h
|
TARGET_STM32L0 astyle
|
2018-06-27 14:43:59 +02:00 |
pwmout_device.c
|
Don't use define checks on DEVICE_FOO macros (partner code)
|
2019-01-14 13:06:14 +00:00 |
pwmout_device.h
|
Don't use define checks on DEVICE_FOO macros (partner code)
|
2019-01-14 13:06:14 +00:00 |
serial_device.c
|
STM32 serial RX/TX active patch
|
2018-06-28 18:05:52 +02:00 |
spi_api.c
|
TARGET_STM32L0 astyle
|
2018-06-27 14:43:59 +02:00 |
spi_device.h
|
STM32 SPI specific mode for higher performance
|
2017-06-16 10:23:48 +02:00 |