ARMmbed
/
mbed-os
mirror of https://github.com/ARMmbed/mbed-os.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
mbed-os/targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L433xC/system_clock.c

297 lines
13 KiB
C
Raw Blame History

/* mbed Microcontroller Library
* SPDX-License-Identifier: BSD-3-Clause
******************************************************************************
*
* Copyright (c) 2015-2021 STMicroelectronics.
* All rights reserved.
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/**
* This file configures the system clock depending on config from targets.json:
*-----------------------------------------------------------------------------
* System clock source | 1- USE_PLL_HSE_EXTC (external clock)
* | 2- USE_PLL_HSE_XTAL (external xtal)
* | 3- USE_PLL_HSI (internal 16 MHz)
* | 4- USE_PLL_MSI (internal 100kHz to 48 MHz)
*-----------------------------------------------------------------------------
* SYSCLK(MHz) | 80
* AHBCLK (MHz) | 80
* APB1CLK (MHz) | 80
* APB2CLK (MHz) | 80
* USB capable | YES
*-----------------------------------------------------------------------------
**/
#include "stm32l4xx.h"
#include "mbed_error.h"
// clock source is selected with CLOCK_SOURCE in json config
#define USE_PLL_HSE_EXTC 0x8 // Use external clock (OSC_IN)
#define USE_PLL_HSE_XTAL 0x4 // Use external xtal (OSC_IN/OSC_OUT)
#define USE_PLL_HSI 0x2 // Use HSI internal clock
#define USE_PLL_MSI 0x1 // Use MSI internal clock
#define DEBUG_MCO (0) // Output the MCO on PA8 for debugging (0=OFF, 1=SYSCLK, 2=HSE, 3=HSI, 4=MSI)
#if ( ((CLOCK_SOURCE) & USE_PLL_HSE_XTAL) || ((CLOCK_SOURCE) & USE_PLL_HSE_EXTC) )
uint8_t SetSysClock_PLL_HSE(uint8_t bypass);
#endif /* ((CLOCK_SOURCE) & USE_PLL_HSE_XTAL) || ((CLOCK_SOURCE) & USE_PLL_HSE_EXTC) */
#if ((CLOCK_SOURCE) & USE_PLL_HSI)
uint8_t SetSysClock_PLL_HSI(void);
#endif /* ((CLOCK_SOURCE) & USE_PLL_HSI) */
#if ((CLOCK_SOURCE) & USE_PLL_MSI)
uint8_t SetSysClock_PLL_MSI(void);
#endif /* ((CLOCK_SOURCE) & USE_PLL_MSI) */
/**
* @brief Configures the System clock source, PLL Multiplier and Divider factors,
* AHB/APBx prescalers and Flash settings
* @note This function is called in mbed_sdk_init() function (targets/TARGET_STM/mbed_overrides.c)
* and after each deepsleep period in hal_deepsleep() (targets/TARGET_STM/sleep.c)
* @param None
* @retval None
*/
MBED_WEAK void SetSysClock(void)
{
#if ((CLOCK_SOURCE) & USE_PLL_HSE_EXTC)
/* 1- Try to start with HSE and external clock */
if (SetSysClock_PLL_HSE(1) == 0)
#endif
{
#if ((CLOCK_SOURCE) & USE_PLL_HSE_XTAL)
/* 2- If fail try to start with HSE and external xtal */
if (SetSysClock_PLL_HSE(0) == 0)
#endif
{
#if ((CLOCK_SOURCE) & USE_PLL_HSI)
/* 3- If fail start with HSI clock */
if (SetSysClock_PLL_HSI() == 0)
#endif
{
#if ((CLOCK_SOURCE) & USE_PLL_MSI)
/* 4- If fail start with MSI clock */
if (SetSysClock_PLL_MSI() == 0)
#endif
{
{
error("SetSysClock failed\n");
}
}
}
}
}
// Output clock on MCO1 pin(PA8) for debugging purpose
#if DEBUG_MCO == 1
HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_SYSCLK, RCC_MCODIV_1);
#endif
}
#if ( ((CLOCK_SOURCE) & USE_PLL_HSE_XTAL) || ((CLOCK_SOURCE) & USE_PLL_HSE_EXTC) )
/******************************************************************************/
/* PLL (clocked by HSE) used as System clock source */
/******************************************************************************/
MBED_WEAK uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
{
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
RCC_PeriphCLKInitTypeDef RCC_PeriphClkInit = {0};
// Enable HSE oscillator and activate PLL with HSE as source
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
if (bypass == 0) {
RCC_OscInitStruct.HSEState = RCC_HSE_ON; // External xtal on OSC_IN/OSC_OUT
} else {
RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; // External clock on OSC_IN
}
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
#if HSE_VALUE==8000000
RCC_OscInitStruct.PLL.PLLM = 1; // VCO input clock = 8 MHz (8 MHz / 1)
#else
#error Unsupported externall clock value, check HSE_VALUE define
#endif
RCC_OscInitStruct.PLL.PLLN = 20; // VCO output clock = 160 MHz (8 MHz * 20)
RCC_OscInitStruct.PLL.PLLP = 7;
RCC_OscInitStruct.PLL.PLLQ = 2;
RCC_OscInitStruct.PLL.PLLR = 2; // PLL clock = 80 MHz (160 MHz / 2)
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
return 0; // FAIL
}
// Select PLL clock as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; // 80 MHz
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 80 MHz
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; // 80 MHz
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; // 80 MHz
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4) != HAL_OK) {
return 0; // FAIL
}
#if DEVICE_USBDEVICE
RCC_PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB;
RCC_PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_PLLSAI1;
RCC_PeriphClkInit.PLLSAI1.PLLSAI1Source = RCC_PLLSOURCE_HSE;
RCC_PeriphClkInit.PLLSAI1.PLLSAI1M = 1;
RCC_PeriphClkInit.PLLSAI1.PLLSAI1N = 12;
RCC_PeriphClkInit.PLLSAI1.PLLSAI1P = RCC_PLLP_DIV7;
RCC_PeriphClkInit.PLLSAI1.PLLSAI1Q = RCC_PLLQ_DIV2;
RCC_PeriphClkInit.PLLSAI1.PLLSAI1R = RCC_PLLR_DIV2;
RCC_PeriphClkInit.PLLSAI1.PLLSAI1ClockOut = RCC_PLLSAI1_48M2CLK;
if (HAL_RCCEx_PeriphCLKConfig(&RCC_PeriphClkInit) != HAL_OK) {
return 0; // FAIL
}
#endif /* DEVICE_USBDEVICE */
// Output clock on MCO1 pin(PA8) for debugging purpose
#if DEBUG_MCO == 2
if (bypass == 0) {
HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_2); // 4 MHz
} else {
HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_1); // 8 MHz
}
#endif
return 1; // OK
}
#endif /* ((CLOCK_SOURCE) & USE_PLL_HSE_XTAL) || ((CLOCK_SOURCE) & USE_PLL_HSE_EXTC) */
#if ((CLOCK_SOURCE) & USE_PLL_HSI)
/******************************************************************************/
/* PLL (clocked by HSI) used as System clock source */
/******************************************************************************/
uint8_t SetSysClock_PLL_HSI(void)
{
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
RCC_PeriphCLKInitTypeDef RCC_PeriphClkInit = {0};
// Enable HSI oscillator and activate PLL with HSI as source
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; // 16 MHz
RCC_OscInitStruct.PLL.PLLM = 2; // VCO input clock = 8 MHz (16 MHz / 2)
RCC_OscInitStruct.PLL.PLLN = 20; // VCO output clock = 160 MHz (8 MHz * 20)
RCC_OscInitStruct.PLL.PLLP = 7;
RCC_OscInitStruct.PLL.PLLQ = 2;
RCC_OscInitStruct.PLL.PLLR = 2; // PLL clock = 80 MHz (160 MHz / 2)
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
return 0; // FAIL
}
// Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; // 80 MHz
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 80 MHz
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; // 80 MHz
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; // 80 MHz
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4) != HAL_OK) {
return 0; // FAIL
}
#if DEVICE_USBDEVICE
RCC_PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB;
RCC_PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_PLLSAI1;
RCC_PeriphClkInit.PLLSAI1.PLLSAI1Source = RCC_PLLSOURCE_HSI;
RCC_PeriphClkInit.PLLSAI1.PLLSAI1M = 2;
RCC_PeriphClkInit.PLLSAI1.PLLSAI1N = 12;
RCC_PeriphClkInit.PLLSAI1.PLLSAI1P = RCC_PLLP_DIV7;
RCC_PeriphClkInit.PLLSAI1.PLLSAI1Q = RCC_PLLQ_DIV2;
RCC_PeriphClkInit.PLLSAI1.PLLSAI1R = RCC_PLLR_DIV2;
RCC_PeriphClkInit.PLLSAI1.PLLSAI1ClockOut = RCC_PLLSAI1_48M2CLK;
if (HAL_RCCEx_PeriphCLKConfig(&RCC_PeriphClkInit) != HAL_OK) {
return 0; // FAIL
}
#endif /* DEVICE_USBDEVICE */
// Output clock on MCO1 pin(PA8) for debugging purpose
#if DEBUG_MCO == 3
HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSI, RCC_MCODIV_1); // 16 MHz
#endif
return 1; // OK
}
#endif /* ((CLOCK_SOURCE) & USE_PLL_HSI) */
#if ((CLOCK_SOURCE) & USE_PLL_MSI)
/******************************************************************************/
/* PLL (clocked by MSI) used as System clock source */
/******************************************************************************/
MBED_WEAK uint8_t SetSysClock_PLL_MSI(void)
{
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0};
#if MBED_CONF_TARGET_LSE_AVAILABLE
// Enable LSE Oscillator to automatically calibrate the MSI clock
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // No PLL update
RCC_OscInitStruct.LSEState = RCC_LSE_ON; // External 32.768 kHz clock on OSC32_IN/OSC32_OUT
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
return 0; // FAIL
}
#endif /* MBED_CONF_TARGET_LSE_AVAILABLE */
/* Enable MSI Oscillator and activate PLL with MSI as source */
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI;
RCC_OscInitStruct.MSIState = RCC_MSI_ON;
RCC_OscInitStruct.MSICalibrationValue = RCC_MSICALIBRATION_DEFAULT;
RCC_OscInitStruct.MSIClockRange = RCC_MSIRANGE_11; /* 48 MHz */
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_MSI;
RCC_OscInitStruct.PLL.PLLM = 6; /* 8 MHz */
RCC_OscInitStruct.PLL.PLLN = 40; /* 320 MHz */
RCC_OscInitStruct.PLL.PLLP = 7; /* 45 MHz */
RCC_OscInitStruct.PLL.PLLQ = 4; /* 80 MHz */
RCC_OscInitStruct.PLL.PLLR = 4; /* 80 MHz */
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
return 0; // FAIL
}
#if MBED_CONF_TARGET_LSE_AVAILABLE
/* Enable MSI Auto-calibration through LSE */
HAL_RCCEx_EnableMSIPLLMode();
#endif /* MBED_CONF_TARGET_LSE_AVAILABLE */
#if DEVICE_USBDEVICE
/* Select MSI output as USB clock source */
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB;
PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_MSI; /* 48 MHz */
HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct);
#endif /* DEVICE_USBDEVICE */
// Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; /* 80 MHz */
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; /* 80 MHz */
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; /* 80 MHz */
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; /* 80 MHz */
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4) != HAL_OK) {
return 0; // FAIL
}
// Output clock on MCO1 pin(PA8) for debugging purpose
#if DEBUG_MCO == 4
HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_MSI, RCC_MCODIV_2); // 2 MHz
#endif
return 1; // OK
}
#endif /* ((CLOCK_SOURCE) & USE_PLL_MSI) */
Reference in New Issue View Git Blame Copy Permalink