ARMmbed
/
mbed-os
mirror of https://github.com/ARMmbed/mbed-os.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
mbed-os/targets/TARGET_NUVOTON/TARGET_M451/can_api.c

332 lines
8.1 KiB
C
Raw Blame History

/* mbed Microcontroller Library
* Copyright (c) 2015-2016 Nuvoton
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "can_api.h"
#include "m451_gpio.h"
#include "m451_can.h"
#if DEVICE_CAN
#include <string.h>
#include "cmsis.h"
#include "pinmap.h"
#include "PeripheralPins.h"
#include "nu_modutil.h"
#include "nu_miscutil.h"
#include "nu_bitutil.h"
#include "mbed_critical.h"
#define NU_CAN_DEBUG 0
#define CAN_NUM 1
static uint32_t can_irq_ids[CAN_NUM] = {0};
static can_irq_handler can0_irq_handler;
static const struct nu_modinit_s can_modinit_tab[] = {
{CAN_0, CAN0_MODULE, 0, 0, CAN0_RST, CAN0_IRQn, NULL},
{NC, 0, 0, 0, 0, (IRQn_Type) 0, NULL}
};
void can_init_freq(can_t *obj, PinName rd, PinName td, int hz)
{
uint32_t can_td = (CANName)pinmap_peripheral(td, PinMap_CAN_TD);
uint32_t can_rd = (CANName)pinmap_peripheral(rd, PinMap_CAN_RD);
obj->can = (CANName)pinmap_merge(can_td, can_rd);
MBED_ASSERT((int)obj->can != NC);
const struct nu_modinit_s *modinit = get_modinit(obj->can, can_modinit_tab);
MBED_ASSERT(modinit != NULL);
MBED_ASSERT(modinit->modname == obj->can);
obj->pin_rd = rd;
obj->pin_td = td;
pinmap_pinout(td, PinMap_CAN_TD);
pinmap_pinout(rd, PinMap_CAN_RD);
// Enable IP clock
CLK_EnableModuleClock(modinit->clkidx);
// Reset this module
SYS_ResetModule(modinit->rsetidx);
obj->index = 0;
/* For M453 mbed Board Transmitter Setting (RS Pin) */
GPIO_SetMode(PA, BIT0| BIT1, GPIO_MODE_OUTPUT);
PA0 = 0x00;
PA1 = 0x00;
CAN_Open((CAN_T *)NU_MODBASE(obj->can), hz, CAN_NORMAL_MODE);
can_filter(obj, 0, 0, CANStandard, 0);
}
void can_init(can_t *obj, PinName rd, PinName td)
{
can_init_freq(obj, rd, td, 500000);
}
void can_free(can_t *obj)
{
const struct nu_modinit_s *modinit = get_modinit(obj->can, can_modinit_tab);
MBED_ASSERT(modinit != NULL);
MBED_ASSERT(modinit->modname == obj->can);
// Reset this module
SYS_ResetModule(modinit->rsetidx);
CLK_DisableModuleClock(modinit->clkidx);
/* Free up pins */
gpio_set(obj->pin_rd);
gpio_set(obj->pin_td);
obj->pin_rd = NC;
obj->pin_td = NC;
}
int can_frequency(can_t *obj, int hz)
{
CAN_SetBaudRate((CAN_T *)NU_MODBASE(obj->can), hz);
return CAN_GetCANBitRate((CAN_T *)NU_MODBASE(obj->can));
}
static void can_irq(CANName name, int id)
{
CAN_T *can = (CAN_T *)NU_MODBASE(name);
uint32_t u8IIDRstatus;
u8IIDRstatus = can->IIDR;
if(u8IIDRstatus == 0x00008000) { /* Check Status Interrupt Flag (Error status Int and Status change Int) */
/**************************/
/* Status Change interrupt*/
/**************************/
if(can->STATUS & CAN_STATUS_RXOK_Msk) {
can->STATUS &= ~CAN_STATUS_RXOK_Msk; /* Clear Rx Ok status*/
can0_irq_handler(can_irq_ids[id], IRQ_RX);
}
if(can->STATUS & CAN_STATUS_TXOK_Msk) {
can->STATUS &= ~CAN_STATUS_TXOK_Msk; /* Clear Tx Ok status*/
can0_irq_handler(can_irq_ids[id], IRQ_TX);
}
/**************************/
/* Error Status interrupt */
/**************************/
if(can->STATUS & CAN_STATUS_EWARN_Msk) {
can0_irq_handler(can_irq_ids[id], IRQ_ERROR);
}
if(can->STATUS & CAN_STATUS_BOFF_Msk) {
can0_irq_handler(can_irq_ids[id], IRQ_BUS);
}
} else if (u8IIDRstatus!=0) {
can0_irq_handler(can_irq_ids[id], IRQ_OVERRUN);
CAN_CLR_INT_PENDING_BIT(can, ((can->IIDR) -1)); /* Clear Interrupt Pending */
} else if(can->WU_STATUS == 1) {
can->WU_STATUS = 0; /* Write '0' to clear */
can0_irq_handler(can_irq_ids[id], IRQ_WAKEUP);
}
}
void CAN0_IRQHandler(void)
{
can_irq(CAN_0, 0);
}
void can_irq_init(can_t *obj, can_irq_handler handler, uint32_t id)
{
can0_irq_handler = handler;
can_irq_ids[obj->index] = id;
}
void can_irq_free(can_t *obj)
{
CAN_DisableInt((CAN_T *)NU_MODBASE(obj->can), (CAN_CON_IE_Msk|CAN_CON_SIE_Msk|CAN_CON_EIE_Msk));
can_irq_ids[obj->index] = 0;
NVIC_DisableIRQ(CAN0_IRQn);
}
void can_irq_set(can_t *obj, CanIrqType irq, uint32_t enable)
{
CAN_T *can_base = (CAN_T *) NU_MODBASE(obj->can);
CAN_EnterInitMode(can_base, ((enable != 0 )? CAN_CON_IE_Msk :0) );
switch (irq)
{
case IRQ_ERROR:
case IRQ_BUS:
case IRQ_PASSIVE:
can_base->CON = can_base->CON |CAN_CON_EIE_Msk;
can_base->CON = can_base->CON |CAN_CON_SIE_Msk;
break;
case IRQ_RX:
case IRQ_TX:
case IRQ_OVERRUN:
case IRQ_WAKEUP:
can_base->CON = can_base->CON |CAN_CON_SIE_Msk;
break;
default:
break;
}
CAN_LeaveInitMode(can_base);
NVIC_SetVector(CAN0_IRQn, (uint32_t)&CAN0_IRQHandler);
NVIC_EnableIRQ(CAN0_IRQn);
}
int can_write(can_t *obj, CAN_Message msg, int cc)
{
STR_CANMSG_T CMsg;
CMsg.IdType = (uint32_t)msg.format;
CMsg.FrameType = (uint32_t)!msg.type;
CMsg.Id = msg.id;
CMsg.DLC = msg.len;
memcpy((void *)&CMsg.Data[0],(const void *)&msg.data[0], (unsigned int)8);
return CAN_Transmit((CAN_T *)NU_MODBASE(obj->can), cc, &CMsg);
}
int can_read(can_t *obj, CAN_Message *msg, int handle)
{
STR_CANMSG_T CMsg;
if(!CAN_Receive((CAN_T *)NU_MODBASE(obj->can), handle, &CMsg))
return 0;
msg->format = (CANFormat)CMsg.IdType;
msg->type = (CANType)!CMsg.FrameType;
msg->id = CMsg.Id;
msg->len = CMsg.DLC;
memcpy(&msg->data[0], &CMsg.Data[0], 8);
return 1;
}
int can_mode(can_t *obj, CanMode mode)
{
CAN_T *can_base = (CAN_T *) NU_MODBASE(obj->can);
int success = 0;
switch (mode)
{
case MODE_RESET:
CAN_LeaveTestMode(can_base);
success = 1;
break;
case MODE_NORMAL:
CAN_EnterTestMode(can_base, CAN_TEST_BASIC_Msk);
success = 1;
break;
case MODE_SILENT:
CAN_EnterTestMode(can_base, CAN_TEST_SILENT_Msk);
success = 1;
break;
case MODE_TEST_LOCAL:
case MODE_TEST_GLOBAL:
CAN_EnterTestMode(can_base, CAN_TEST_LBACK_Msk);
success = 1;
break;
case MODE_TEST_SILENT:
CAN_EnterTestMode(can_base, CAN_TEST_SILENT_Msk | CAN_TEST_LBACK_Msk);
success = 1;
break;
default:
success = 0;
break;
}
return success;
}
int can_filter(can_t *obj, uint32_t id, uint32_t mask, CANFormat format, int32_t handle)
{
return CAN_SetRxMsg((CAN_T *)NU_MODBASE(obj->can), handle , (uint32_t)format, id);
}
void can_reset(can_t *obj)
{
const struct nu_modinit_s *modinit = get_modinit(obj->can, can_modinit_tab);
MBED_ASSERT(modinit != NULL);
MBED_ASSERT(modinit->modname == obj->can);
// Reset this module
SYS_ResetModule(modinit->rsetidx);
}
unsigned char can_rderror(can_t *obj)
{
CAN_T *can = (CAN_T *)NU_MODBASE(obj->can);
return ((can->ERR>>8)&0xFF);
}
unsigned char can_tderror(can_t *obj)
{
CAN_T *can = (CAN_T *)NU_MODBASE(obj->can);
return ((can->ERR)&0xFF);
}
void can_monitor(can_t *obj, int silent)
{
CAN_EnterTestMode((CAN_T *)NU_MODBASE(obj->can), CAN_TEST_SILENT_Msk);
}
const PinMap *can_rd_pinmap()
{
return PinMap_CAN_TD;
}
const PinMap *can_td_pinmap()
{
return PinMap_CAN_RD;
}
#endif // DEVICE_CAN
Reference in New Issue View Git Blame Copy Permalink