mbed-os/targets/TARGET_Maxim/TARGET_MAX32620/TARGET_MAX32620HSP/PinNames.h

215 lines
5.7 KiB
C

/*******************************************************************************
* Copyright (C) 2016 Maxim Integrated Products, Inc., All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included
* in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
* IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
* OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*
* Except as contained in this notice, the name of Maxim Integrated
* Products, Inc. shall not be used except as stated in the Maxim Integrated
* Products, Inc. Branding Policy.
*
* The mere transfer of this software does not imply any licenses
* of trade secrets, proprietary technology, copyrights, patents,
* trademarks, maskwork rights, or any other form of intellectual
* property whatsoever. Maxim Integrated Products, Inc. retains all
* ownership rights.
*******************************************************************************
*/
#ifndef MBED_PINNAMES_H
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "gpio_regs.h"
#ifdef __cplusplus
extern "C" {
#endif
typedef enum {
PIN_INPUT = MXC_V_GPIO_OUT_MODE_NORMAL_HIGH_Z,
PIN_OUTPUT = MXC_V_GPIO_OUT_MODE_NORMAL
} PinDirection;
#define PORT_SHIFT 12
#define PINNAME_TO_PORT(name) ((unsigned int)(name) >> PORT_SHIFT)
#define PINNAME_TO_PIN(name) ((unsigned int)(name) & ~(0xFFFFFFFF << PORT_SHIFT))
#define NOT_CONNECTED (int)0xFFFFFFFF
typedef enum {
P0_0 = (0 << PORT_SHIFT) | 0,
P0_1 = (0 << PORT_SHIFT) | 1,
P0_2 = (0 << PORT_SHIFT) | 2,
P0_3 = (0 << PORT_SHIFT) | 3,
P0_4 = (0 << PORT_SHIFT) | 4,
P0_5 = (0 << PORT_SHIFT) | 5,
P0_6 = (0 << PORT_SHIFT) | 6,
P0_7 = (0 << PORT_SHIFT) | 7,
P1_0 = (1 << PORT_SHIFT) | 0,
P1_1 = (1 << PORT_SHIFT) | 1,
P1_2 = (1 << PORT_SHIFT) | 2,
P1_3 = (1 << PORT_SHIFT) | 3,
P1_4 = (1 << PORT_SHIFT) | 4,
P1_5 = (1 << PORT_SHIFT) | 5,
P1_6 = (1 << PORT_SHIFT) | 6,
P1_7 = (1 << PORT_SHIFT) | 7,
P2_0 = (2 << PORT_SHIFT) | 0,
P2_1 = (2 << PORT_SHIFT) | 1,
P2_2 = (2 << PORT_SHIFT) | 2,
P2_3 = (2 << PORT_SHIFT) | 3,
P2_4 = (2 << PORT_SHIFT) | 4,
P2_5 = (2 << PORT_SHIFT) | 5,
P2_6 = (2 << PORT_SHIFT) | 6,
P2_7 = (2 << PORT_SHIFT) | 7,
P3_0 = (3 << PORT_SHIFT) | 0,
P3_1 = (3 << PORT_SHIFT) | 1,
P3_2 = (3 << PORT_SHIFT) | 2,
P3_3 = (3 << PORT_SHIFT) | 3,
P3_4 = (3 << PORT_SHIFT) | 4,
P3_5 = (3 << PORT_SHIFT) | 5,
P3_6 = (3 << PORT_SHIFT) | 6,
P3_7 = (3 << PORT_SHIFT) | 7,
P4_0 = (4 << PORT_SHIFT) | 0,
P4_1 = (4 << PORT_SHIFT) | 1,
P4_2 = (4 << PORT_SHIFT) | 2,
P4_3 = (4 << PORT_SHIFT) | 3,
P4_4 = (4 << PORT_SHIFT) | 4,
P4_5 = (4 << PORT_SHIFT) | 5,
P4_6 = (4 << PORT_SHIFT) | 6,
P4_7 = (4 << PORT_SHIFT) | 7,
P5_0 = (5 << PORT_SHIFT) | 0,
P5_1 = (5 << PORT_SHIFT) | 1,
P5_2 = (5 << PORT_SHIFT) | 2,
P5_3 = (5 << PORT_SHIFT) | 3,
P5_4 = (5 << PORT_SHIFT) | 4,
P5_5 = (5 << PORT_SHIFT) | 5,
P5_6 = (5 << PORT_SHIFT) | 6,
P5_7 = (5 << PORT_SHIFT) | 7,
P6_0 = (6 << PORT_SHIFT) | 0,
// Analog input pins
AIN_0 = (0xA << PORT_SHIFT) | 0,
AIN_1 = (0xA << PORT_SHIFT) | 1,
AIN_2 = (0xA << PORT_SHIFT) | 2,
AIN_3 = (0xA << PORT_SHIFT) | 3,
// LEDs
LED_RED = P2_0,
LED1 = LED_RED,
LED2 = NOT_CONNECTED,
LED3 = NOT_CONNECTED,
LED4 = NOT_CONNECTED,
// Push button
SW1 = P2_1,
SW2 = NOT_CONNECTED,
SW3 = NOT_CONNECTED,
// Standardized button names
BUTTON1 = SW1,
// USB bridge connected UART pins
USBTX = P0_1,
USBRX = P0_0,
STDIO_UART_TX = USBTX,
STDIO_UART_RX = USBRX,
// I2C pins
I2C0_SCL = NOT_CONNECTED,
I2C0_SDA = NOT_CONNECTED,
I2C1_SCL = P3_5,
I2C1_SDA = P3_4,
I2C2_SCL = P6_0,
I2C2_SDA = P5_7,
// UART pins
UART0_RX = P0_0,
UART0_TX = P0_1,
UART0_CTS = NOT_CONNECTED,
UART0_RTS = NOT_CONNECTED,
UART1_RX = P2_0,
UART1_TX = P2_1,
UART1_CTS = NOT_CONNECTED,
UART1_RTS = NOT_CONNECTED,
UART2_RX = NOT_CONNECTED,
UART2_TX = NOT_CONNECTED,
UART2_CTS = NOT_CONNECTED,
UART2_RTS = NOT_CONNECTED,
UART3_RX = NOT_CONNECTED,
UART3_TX = NOT_CONNECTED,
UART3_CTS = NOT_CONNECTED,
UART3_RTS = NOT_CONNECTED,
// SPI pins
SPI0_SCK = P0_4,
SPI0_MOSI = P0_5,
SPI0_MISO = P0_6,
SPI0_SS = P0_7,
SPI1_SCK = P1_0,
SPI1_MOSI = P1_1,
SPI1_MISO = P1_2,
SPI1_SS = P1_3,
SPI2_SCK = NOT_CONNECTED,
SPI2_MOSI = NOT_CONNECTED,
SPI2_MISO = NOT_CONNECTED,
SPI2_SS = NOT_CONNECTED,
// BTLE Radio HCI
HCI_SCK = P5_0,
HCI_MOSI = P5_1,
HCI_MISO = P5_2,
HCI_CSN = P5_3,
HCI_IRQ = P5_6,
HCI_RST = P4_2,
// Not connected
NC = NOT_CONNECTED
} PinName;
typedef enum {
PullUp,
PullDown,
OpenDrain,
PullNone,
PullDefault = PullUp
} PinMode;
typedef enum {
LED_ON = 0,
LED_OFF = 1
} LedStates;
#ifdef __cplusplus
}
#endif
#endif