ARMmbed
/
mbed-os
mirror of https://github.com/ARMmbed/mbed-os.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
mbed-os/targets/TARGET_NUVOTON/TARGET_NUC472/device/StdDriver/nuc472_sc.c

282 lines
9.0 KiB
C
Raw Blame History

/**************************************************************************//**
* @file sc.c
* @version V1.00
* $Revision: 6 $
* $Date: 14/08/12 7:25p $
* @brief NUC472/NUC442 Smartcard(SC) driver source file
*
* @note
* Copyright (C) 2014 Nuvoton Technology Corp. All rights reserved.
*****************************************************************************/
#include "NUC472_442.h"
// Below are variables used locally by SC driver and does not want to parse by doxygen unless HIDDEN_SYMBOLS is defined
/// @cond HIDDEN_SYMBOLS
static uint32_t u32CardStateIgnore[SC_INTERFACE_NUM] = {0, 0, 0, 0, 0, 0};
/// @endcond HIDDEN_SYMBOLS
/** @addtogroup NUC472_442_Device_Driver NUC472/NUC442 Device Driver
@{
*/
/** @addtogroup NUC472_442_SC_Driver SC Driver
@{
*/
/** @addtogroup NUC472_442_SC_EXPORTED_FUNCTIONS SC Exported Functions
@{
*/
/**
* @brief This function indicates specified smartcard slot status
* @param[in] sc Base address of smartcard module
* @return Card insert status
* @retval TRUE Card insert
* @retval FALSE Card remove
*/
uint32_t SC_IsCardInserted(SC_T *sc)
{
// put conditions into two variable to remove IAR compilation warning
uint32_t cond1 = ((sc->STATUS & SC_STATUS_CDPINSTS_Msk) >> SC_STATUS_CDPINSTS_Pos);
uint32_t cond2 = ((sc->CTL & SC_CTL_CDLV_Msk) >> SC_CTL_CDLV_Pos);
if(sc == SC0 && u32CardStateIgnore[0] == 1)
return TRUE;
else if(sc == SC1 && u32CardStateIgnore[1] == 1)
return TRUE;
else if(sc == SC2 && u32CardStateIgnore[2] == 1)
return TRUE;
else if(sc == SC3 && u32CardStateIgnore[3] == 1)
return TRUE;
else if(sc == SC4 && u32CardStateIgnore[4] == 1)
return TRUE;
else if(sc == SC5 && u32CardStateIgnore[5] == 1)
return TRUE;
else if(cond1 != cond2)
return FALSE;
else
return TRUE;
}
/**
* @brief This function reset both transmit and receive FIFO of specified smartcard module
* @param[in] sc Base address of smartcard module
* @return None
*/
void SC_ClearFIFO(SC_T *sc)
{
sc->ALTCTL |= (SC_ALTCTL_TXRST_Msk | SC_ALTCTL_RXRST_Msk);
}
/**
* @brief This function disable specified smartcard module
* @param[in] sc Base address of smartcard module
* @return None
*/
void SC_Close(SC_T *sc)
{
sc->INTEN = 0;
while(sc->PINCTL & SC_PINCTL_SYNC_Msk);
sc->PINCTL = 0;
sc->ALTCTL = 0;
while(sc->CTL & SC_CTL_SYNC_Msk);
sc->CTL = 0;
}
/**
* @brief This function initialized smartcard module
* @param[in] sc Base address of smartcard module
* @param[in] u32CD Card detect polarity, select the CD pin state which indicates card insert. Could be
* -\ref SC_PIN_STATE_HIGH
* -\ref SC_PIN_STATE_LOW
* -\ref SC_PIN_STATE_IGNORE, no card detect pin, always assumes card present
* @param[in] u32PWR Power on polarity, select the PWR pin state which could set smartcard VCC to high level. Could be
* -\ref SC_PIN_STATE_HIGH
* -\ref SC_PIN_STATE_LOW
* @return None
*/
void SC_Open(SC_T *sc, uint32_t u32CD, uint32_t u32PWR)
{
uint32_t u32Reg = 0, u32Intf;
if(sc == SC0)
u32Intf = 0;
else if(sc == SC1)
u32Intf = 1;
else if(sc == SC2)
u32Intf = 2;
else if(sc == SC3)
u32Intf = 3;
else if(sc == SC4)
u32Intf = 4;
else
u32Intf = 5;
if(u32CD != SC_PIN_STATE_IGNORE) {
u32Reg = u32CD ? 0: SC_CTL_CDLV_Msk;
u32CardStateIgnore[u32Intf] = 0;
} else {
u32CardStateIgnore[u32Intf] = 1;
}
sc->PINCTL = u32PWR ? 0 : SC_PINCTL_PWRINV_Msk;
while(sc->CTL & SC_CTL_SYNC_Msk);
sc->CTL = SC_CTL_SCEN_Msk | u32Reg;
}
/**
* @brief This function reset specified smartcard module to its default state for activate smartcard
* @param[in] sc Base address of smartcard module
* @return None
*/
void SC_ResetReader(SC_T *sc)
{
uint32_t u32Intf;
if(sc == SC0)
u32Intf = 0;
else if(sc == SC1)
u32Intf = 1;
else if(sc == SC2)
u32Intf = 2;
else if(sc == SC3)
u32Intf = 3;
else if(sc == SC4)
u32Intf = 4;
else
u32Intf = 5;
// Reset FIFO, enable auto de-activation while card removal
sc->ALTCTL |= (SC_ALTCTL_TXRST_Msk | SC_ALTCTL_RXRST_Msk | SC_ALTCTL_ADACEN_Msk);
// Set Rx trigger level to 1 character, longest card detect debounce period, disable error retry (EMV ATR does not use error retry)
while(sc->CTL & SC_CTL_SYNC_Msk);
sc->CTL &= ~(SC_CTL_RXTRGLV_Msk | SC_CTL_CDDBSEL_Msk | SC_CTL_TXRTY_Msk | SC_CTL_RXRTY_Msk);
// Enable auto convention, and all three smartcard internal timers
sc->CTL |= SC_CTL_AUTOCEN_Msk | SC_CTL_TMRSEL_Msk;
// Disable Rx timeout
sc->RXTOUT = 0;
// 372 clocks per ETU by default
sc->ETUCTL= 371;
/* Enable necessary interrupt for smartcard operation */
if(u32CardStateIgnore[u32Intf]) // Do not enable card detect interrupt if card present state ignore
sc->INTEN = (SC_INTEN_RDAIEN_Msk |
SC_INTEN_TERRIEN_Msk |
SC_INTEN_TMR0IEN_Msk |
SC_INTEN_TMR1IEN_Msk |
SC_INTEN_TMR2IEN_Msk |
SC_INTEN_BGTIEN_Msk |
SC_INTEN_ACERRIEN_Msk);
else
sc->INTEN = (SC_INTEN_RDAIEN_Msk |
SC_INTEN_TERRIEN_Msk |
SC_INTEN_TMR0IEN_Msk |
SC_INTEN_TMR1IEN_Msk |
SC_INTEN_TMR2IEN_Msk |
SC_INTEN_BGTIEN_Msk |
SC_INTEN_CDIEN_Msk |
SC_INTEN_ACERRIEN_Msk);
return;
}
/**
* @brief This function block guard time (BGT) of specified smartcard module
* @param[in] sc Base address of smartcard module
* @param[in] u32BGT Block guard time using ETU as unit, valid range are between 1 ~ 32
* @return None
*/
void SC_SetBlockGuardTime(SC_T *sc, uint32_t u32BGT)
{
sc->CTL = (sc->CTL & ~SC_CTL_BGT_Msk) | ((u32BGT - 1) << SC_CTL_BGT_Pos);
}
/**
* @brief This function character guard time (CGT) of specified smartcard module
* @param[in] sc Base address of smartcard module
* @param[in] u32CGT Character guard time using ETU as unit, valid range are between 11 ~ 267
* @return None
*/
void SC_SetCharGuardTime(SC_T *sc, uint32_t u32CGT)
{
u32CGT -= sc->CTL & SC_CTL_NSB_Msk ? 11: 12;
sc->EGT = u32CGT;
}
/**
* @brief This function stop all smartcard timer of specified smartcard module
* @param[in] sc Base address of smartcard module
* @return None
* @note This function stop the timers within smartcard module, \b not timer module
*/
void SC_StopAllTimer(SC_T *sc)
{
sc->ALTCTL &= ~(SC_ALTCTL_CNTEN0_Msk | SC_ALTCTL_CNTEN1_Msk | SC_ALTCTL_CNTEN2_Msk);
}
/**
* @brief This function configure and start a smartcard timer of specified smartcard module
* @param[in] sc Base address of smartcard module
* @param[in] u32TimerNum Timer(s) to start. Valid values are 0, 1, 2.
* @param[in] u32Mode Timer operating mode, valid values are:
* - \ref SC_TMR_MODE_0
* - \ref SC_TMR_MODE_1
* - \ref SC_TMR_MODE_2
* - \ref SC_TMR_MODE_3
* - \ref SC_TMR_MODE_4
* - \ref SC_TMR_MODE_5
* - \ref SC_TMR_MODE_6
* - \ref SC_TMR_MODE_7
* - \ref SC_TMR_MODE_8
* - \ref SC_TMR_MODE_F
* @param[in] u32ETUCount Timer timeout duration, ETU based. For timer 0, valid range are between 1~0x1000000ETUs.
* For timer 1 and timer 2, valid range are between 1 ~ 0x100 ETUs
* @return None
* @note This function start the timer within smartcard module, \b not timer module
* @note Depend on the timer operating mode, timer may not start counting immediately
*/
void SC_StartTimer(SC_T *sc, uint32_t u32TimerNum, uint32_t u32Mode, uint32_t u32ETUCount)
{
uint32_t reg = u32Mode | (SC_TMRCTL0_CNT_Msk & (u32ETUCount - 1));
if(u32TimerNum == 0) {
sc->TMRCTL0 = reg;
sc->ALTCTL |= SC_ALTCTL_CNTEN0_Msk;
} else if(u32TimerNum == 1) {
sc->TMRCTL1 = reg;
sc->ALTCTL |= SC_ALTCTL_CNTEN1_Msk;
} else { // timer 2
sc->TMRCTL2 = reg;
sc->ALTCTL |= SC_ALTCTL_CNTEN2_Msk;
}
}
/**
* @brief This function stop a smartcard timer of specified smartcard module
* @param[in] sc Base address of smartcard module
* @param[in] u32TimerNum Timer(s) to stop. Valid values are 0, 1, 2.
* @return None
* @note This function stop the timer within smartcard module, \b not timer module
*/
void SC_StopTimer(SC_T *sc, uint32_t u32TimerNum)
{
if(u32TimerNum == 0)
sc->ALTCTL &= ~SC_ALTCTL_CNTEN0_Msk;
else if(u32TimerNum == 1)
sc->ALTCTL &= ~SC_ALTCTL_CNTEN1_Msk;
else // timer 2
sc->ALTCTL &= ~SC_ALTCTL_CNTEN2_Msk;
}
/*@}*/ /* end of group NUC472_442_SC_EXPORTED_FUNCTIONS */
/*@}*/ /* end of group NUC472_442_SC_Driver */
/*@}*/ /* end of group NUC472_442_Device_Driver */
/*** (C) COPYRIGHT 2014 Nuvoton Technology Corp. ***/
Reference in New Issue View Git Blame Copy Permalink