ARMmbed
/
mbed-os
mirror of https://github.com/ARMmbed/mbed-os.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
mbed-os/targets/TARGET_NORDIC/TARGET_NRF5/serial_api.c

666 lines
22 KiB
C
Raw Blame History

/*
* Copyright (c) 2013 Nordic Semiconductor ASA
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice, this list
* of conditions and the following disclaimer.
*
* 2. Redistributions in binary form, except as embedded into a Nordic Semiconductor ASA
* integrated circuit in a product or a software update for such product, must reproduce
* the above copyright notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the distribution.
*
* 3. Neither the name of Nordic Semiconductor ASA nor the names of its contributors may be
* used to endorse or promote products derived from this software without specific prior
* written permission.
*
* 4. This software, with or without modification, must only be used with a
* Nordic Semiconductor ASA integrated circuit.
*
* 5. Any software provided in binary or object form under this license must not be reverse
* engineered, decompiled, modified and/or disassembled.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
#include "serial_api.h"
#if DEVICE_SERIAL
#include <string.h>
#include "mbed_assert.h"
#include "mbed_error.h"
#include "nrf_uart.h"
#include "nrf_drv_common.h"
#include "nrf_drv_config.h"
#include "app_util_platform.h"
#include "nrf_gpio.h"
#define UART_INSTANCE_COUNT 1
#define UART_INSTANCE NRF_UART0
#define UART_IRQn UART0_IRQn
#define UART_IRQ_HANDLER UART0_IRQHandler
#define UART_INSTANCE_ID 0
#define UART_CB uart_cb[UART_INSTANCE_ID]
#define UART_DEFAULT_BAUDRATE UART0_CONFIG_BAUDRATE
#define UART_DEFAULT_PARITY UART0_CONFIG_PARITY
// expected the macro from mbed configuration system
#ifndef MBED_CONF_NORDIC_UART_HWFC
#define MBED_CONF_NORDIC_UART_HWFC 1
#warning None of UART flow control configuration (expected macro MBED_CONF_NORDIC_UART_HWFC). The RTSCTS flow control is used by default .
#endif
#if MBED_CONF_NORDIC_UART_HWFC == 1
#define UART_DEFAULT_HWFC UART0_CONFIG_HWFC
#else
#define UART_DEFAULT_HWFC NRF_UART_HWFC_DISABLED
#endif
#define UART_DEFAULT_CTS UART0_CONFIG_PSEL_CTS
#define UART_DEFAULT_RTS UART0_CONFIG_PSEL_RTS
#ifdef NRF51
#define NRFx_MBED_UART_IRQ_PRIORITY APP_IRQ_PRIORITY_LOW
#elif defined(NRF52)
#define NRFx_MBED_UART_IRQ_PRIORITY APP_IRQ_PRIORITY_LOWEST
#endif
// Required by "retarget.cpp".
int stdio_uart_inited = 0;
serial_t stdio_uart;
typedef struct {
bool initialized;
uint32_t irq_context;
uart_irq_handler irq_handler;
uint32_t pselrxd;
uint32_t pseltxd;
uint32_t pselcts;
uint32_t pselrts;
nrf_uart_hwfc_t hwfc;
nrf_uart_parity_t parity;
nrf_uart_baudrate_t baudrate;
#if DEVICE_SERIAL_ASYNCH
bool volatile rx_active;
uint8_t *rx_buffer;
size_t rx_length;
size_t rx_pos;
void (*rx_asynch_handler)();
uint8_t char_match;
bool volatile tx_active;
const uint8_t *tx_buffer;
size_t tx_length;
size_t tx_pos;
void (*tx_asynch_handler)();
uint32_t events_wanted;
uint32_t events_occured;
#define UART_IRQ_TX 1
#define UART_IRQ_RX 2
uint8_t irq_enabled;
#endif // DEVICE_SERIAL_ASYNCH
} uart_ctlblock_t;
static uart_ctlblock_t uart_cb[UART_INSTANCE_COUNT];
static void internal_set_hwfc(FlowControl type,
PinName rxflow, PinName txflow);
#if DEVICE_SERIAL_ASYNCH
static void end_asynch_rx(void)
{
// If RX interrupt is activated for synchronous operations,
// don't disable it, just stop handling it here.
if (!(UART_CB.irq_enabled & UART_IRQ_RX)) {
nrf_uart_int_disable(UART_INSTANCE, NRF_UART_INT_MASK_RXDRDY);
}
UART_CB.rx_active = false;
}
static void end_asynch_tx(void)
{
// If TX interrupt is activated for synchronous operations,
// don't disable it, just stop handling it here.
if (!(UART_CB.irq_enabled & UART_IRQ_TX)) {
nrf_uart_int_disable(UART_INSTANCE, NRF_UART_INT_MASK_TXDRDY);
}
UART_CB.tx_active = false;
}
#endif // DEVICE_SERIAL_ASYNCH
void UART_IRQ_HANDLER(void)
{
if (nrf_uart_int_enable_check(UART_INSTANCE, NRF_UART_INT_MASK_RXDRDY) &&
nrf_uart_event_check(UART_INSTANCE, NRF_UART_EVENT_RXDRDY)) {
#if DEVICE_SERIAL_ASYNCH
if (UART_CB.rx_active) {
nrf_uart_event_clear(UART_INSTANCE, NRF_UART_EVENT_RXDRDY);
uint8_t rx_data = nrf_uart_rxd_get(UART_INSTANCE);
UART_CB.rx_buffer[UART_CB.rx_pos] = rx_data;
bool end_rx = false;
// If character matching should be performed, check if the current
// data matches the given one.
if (UART_CB.char_match != SERIAL_RESERVED_CHAR_MATCH &&
rx_data == UART_CB.char_match) {
// If it does, report the match and abort further receiving.
UART_CB.events_occured |= SERIAL_EVENT_RX_CHARACTER_MATCH;
if (UART_CB.events_wanted & SERIAL_EVENT_RX_CHARACTER_MATCH) {
end_rx = true;
}
}
if (++UART_CB.rx_pos >= UART_CB.rx_length) {
UART_CB.events_occured |= SERIAL_EVENT_RX_COMPLETE;
end_rx = true;
}
if (end_rx) {
end_asynch_rx();
if (UART_CB.rx_asynch_handler) {
// Use local variable to make it possible to start a next
// transfer from callback routine.
void (*handler)() = UART_CB.rx_asynch_handler;
UART_CB.rx_asynch_handler = NULL;
handler();
}
}
}
else
#endif
if (UART_CB.irq_handler) {
UART_CB.irq_handler(UART_CB.irq_context, RxIrq);
}
}
if (nrf_uart_int_enable_check(UART_INSTANCE, NRF_UART_INT_MASK_TXDRDY) &&
nrf_uart_event_check(UART_INSTANCE, NRF_UART_EVENT_TXDRDY)) {
#if DEVICE_SERIAL_ASYNCH
if (UART_CB.tx_active) {
if (UART_CB.tx_pos < UART_CB.tx_length) {
// When there is still something to send, clear the TXDRDY event
// and put next byte to transmitter.
nrf_uart_event_clear(UART_INSTANCE, NRF_UART_EVENT_TXDRDY);
nrf_uart_txd_set(UART_INSTANCE,
UART_CB.tx_buffer[UART_CB.tx_pos]);
UART_CB.tx_pos++;
}
else {
// When the TXDRDY event is set after the last byte to be sent
// has been passed to the transmitter, the job is done and TX
// complete can be indicated.
// Don't clear the TXDRDY event, it needs to remain set for the
// 'serial_writable' function to work properly.
end_asynch_tx();
UART_CB.events_occured |= SERIAL_EVENT_TX_COMPLETE;
if (UART_CB.tx_asynch_handler) {
// Use local variable to make it possible to start a next
// transfer from callback routine.
void (*handler)() = UART_CB.tx_asynch_handler;
UART_CB.tx_asynch_handler = NULL;
handler();
}
}
}
else
#endif
if (UART_CB.irq_handler) {
UART_CB.irq_handler(UART_CB.irq_context, TxIrq);
}
}
#if DEVICE_SERIAL_ASYNCH
if (nrf_uart_event_check(UART_INSTANCE, NRF_UART_EVENT_ERROR)) {
nrf_uart_event_clear(UART_INSTANCE, NRF_UART_EVENT_ERROR);
uint8_t errorsrc = nrf_uart_errorsrc_get_and_clear(UART_INSTANCE);
if (UART_CB.rx_asynch_handler) {
UART_CB.events_occured |= SERIAL_EVENT_ERROR;
if (errorsrc & NRF_UART_ERROR_PARITY_MASK) {
UART_CB.events_occured |= SERIAL_EVENT_RX_PARITY_ERROR;
}
if (errorsrc & NRF_UART_ERROR_FRAMING_MASK) {
UART_CB.events_occured |= SERIAL_EVENT_RX_FRAMING_ERROR;
}
if (errorsrc & NRF_UART_ERROR_OVERRUN_MASK) {
UART_CB.events_occured |= SERIAL_EVENT_RX_OVERRUN_ERROR;
}
UART_CB.rx_asynch_handler();
}
}
#endif // DEVICE_SERIAL_ASYNCH
}
void serial_init(serial_t *obj, PinName tx, PinName rx) {
NVIC_SetVector(UART0_IRQn, (uint32_t) UART0_IRQHandler);
UART_CB.pseltxd =
(tx == NC) ? NRF_UART_PSEL_DISCONNECTED : (uint32_t)tx;
UART_CB.pselrxd =
(rx == NC) ? NRF_UART_PSEL_DISCONNECTED : (uint32_t)rx;
if (UART_CB.pseltxd != NRF_UART_PSEL_DISCONNECTED) {
nrf_gpio_pin_set(UART_CB.pseltxd);
nrf_gpio_cfg_output(UART_CB.pseltxd);
}
if (UART_CB.pselrxd != NRF_UART_PSEL_DISCONNECTED) {
nrf_gpio_cfg_input(UART_CB.pselrxd, NRF_GPIO_PIN_NOPULL);
}
if (UART_CB.initialized) {
// For already initialized peripheral it is sufficient to reconfigure
// RX/TX pins only.
// Ensure that there is no unfinished TX transfer.
while (!serial_writable(obj)) {
}
// UART pins can be configured only when the peripheral is disabled.
nrf_uart_disable(UART_INSTANCE);
nrf_uart_txrx_pins_set(UART_INSTANCE, UART_CB.pseltxd, UART_CB.pselrxd);
nrf_uart_enable(UART_INSTANCE);
}
else {
UART_CB.baudrate = UART_DEFAULT_BAUDRATE;
UART_CB.parity = UART_DEFAULT_PARITY;
UART_CB.hwfc = UART_DEFAULT_HWFC;
UART_CB.pselcts = UART_DEFAULT_CTS;
UART_CB.pselrts = UART_DEFAULT_RTS;
nrf_uart_event_clear(UART_INSTANCE, NRF_UART_EVENT_RXDRDY);
nrf_uart_event_clear(UART_INSTANCE, NRF_UART_EVENT_TXDRDY);
nrf_uart_task_trigger(UART_INSTANCE, NRF_UART_TASK_STARTRX);
nrf_uart_task_trigger(UART_INSTANCE, NRF_UART_TASK_STARTTX);
nrf_uart_int_disable(UART_INSTANCE, NRF_UART_INT_MASK_RXDRDY |
NRF_UART_INT_MASK_TXDRDY);
#if DEVICE_SERIAL_ASYNCH
nrf_uart_int_enable(UART_INSTANCE, NRF_UART_INT_MASK_ERROR);
#endif
nrf_drv_common_irq_enable(UART_IRQn, NRFx_MBED_UART_IRQ_PRIORITY);
// TX interrupt needs to be signaled when transmitter buffer is empty,
// so a dummy transmission is needed to get the TXDRDY event initially
// set.
nrf_uart_configure(UART_INSTANCE,
NRF_UART_PARITY_EXCLUDED, NRF_UART_HWFC_DISABLED);
// Use maximum baud rate, so this dummy transmission takes as little
// time as possible.
nrf_uart_baudrate_set(UART_INSTANCE, NRF_UART_BAUDRATE_1000000);
// Perform it with disconnected TX pin, so nothing actually comes out
// of the device.
nrf_uart_txrx_pins_disconnect(UART_INSTANCE);
nrf_uart_hwfc_pins_disconnect(UART_INSTANCE);
nrf_uart_enable(UART_INSTANCE);
nrf_uart_txd_set(UART_INSTANCE, 0);
while (!nrf_uart_event_check(UART_INSTANCE, NRF_UART_EVENT_TXDRDY)) {
}
nrf_uart_disable(UART_INSTANCE);
// Now everything is prepared to set the default configuration and
// connect the peripheral to actual pins.
nrf_uart_txrx_pins_set(UART_INSTANCE, UART_CB.pseltxd, UART_CB.pselrxd);
nrf_uart_baudrate_set(UART_INSTANCE, UART_CB.baudrate);
nrf_uart_configure(UART_INSTANCE, UART_CB.parity, UART_CB.hwfc);
if (UART_CB.hwfc == NRF_UART_HWFC_ENABLED) {
internal_set_hwfc(FlowControlRTSCTS,
(PinName) UART_CB.pselrts, (PinName) UART_CB.pselcts);
}
nrf_uart_enable(UART_INSTANCE);
UART_CB.initialized = true;
}
if (tx == STDIO_UART_TX && rx == STDIO_UART_RX) {
stdio_uart_inited = 1;
memcpy(&stdio_uart, obj, sizeof(serial_t));
}
else {
stdio_uart_inited = 0;
}
}
void serial_free(serial_t *obj)
{
(void)obj;
if (UART_CB.initialized) {
nrf_uart_disable(UART_INSTANCE);
nrf_uart_int_disable(UART_INSTANCE, NRF_UART_INT_MASK_RXDRDY |
NRF_UART_INT_MASK_TXDRDY |
NRF_UART_INT_MASK_ERROR);
nrf_drv_common_irq_disable(UART_IRQn);
UART_CB.initialized = false;
// There is only one UART instance, thus at this point the stdio UART
// can no longer be initialized.
stdio_uart_inited = 0;
}
}
void serial_baud(serial_t *obj, int baudrate)
{
// nrf_uart_baudrate_set() is not used here (registers are accessed
// directly) to make it possible to set special baud rates like 56000
// or 31250.
static uint32_t const acceptedSpeeds[][2] = {
{ 1200, UART_BAUDRATE_BAUDRATE_Baud1200 },
{ 2400, UART_BAUDRATE_BAUDRATE_Baud2400 },
{ 4800, UART_BAUDRATE_BAUDRATE_Baud4800 },
{ 9600, UART_BAUDRATE_BAUDRATE_Baud9600 },
{ 14400, UART_BAUDRATE_BAUDRATE_Baud14400 },
{ 19200, UART_BAUDRATE_BAUDRATE_Baud19200 },
{ 28800, UART_BAUDRATE_BAUDRATE_Baud28800 },
{ 31250, (0x00800000UL) /* 31250 baud */ },
{ 38400, UART_BAUDRATE_BAUDRATE_Baud38400 },
{ 56000, (0x00E51000UL) /* 56000 baud */ },
{ 57600, UART_BAUDRATE_BAUDRATE_Baud57600 },
{ 76800, UART_BAUDRATE_BAUDRATE_Baud76800 },
{ 115200, UART_BAUDRATE_BAUDRATE_Baud115200 },
{ 230400, UART_BAUDRATE_BAUDRATE_Baud230400 },
{ 250000, UART_BAUDRATE_BAUDRATE_Baud250000 },
{ 460800, UART_BAUDRATE_BAUDRATE_Baud460800 },
{ 921600, UART_BAUDRATE_BAUDRATE_Baud921600 },
{ 1000000, UART_BAUDRATE_BAUDRATE_Baud1M }
};
if (baudrate <= 1200) {
UART_INSTANCE->BAUDRATE = UART_BAUDRATE_BAUDRATE_Baud1200;
return;
}
int const item_cnt = sizeof(acceptedSpeeds)/sizeof(acceptedSpeeds[0]);
for (int i = 1; i < item_cnt; i++) {
if ((uint32_t)baudrate < acceptedSpeeds[i][0]) {
UART_INSTANCE->BAUDRATE = acceptedSpeeds[i - 1][1];
return;
}
}
UART_INSTANCE->BAUDRATE = UART_BAUDRATE_BAUDRATE_Baud1M;
}
void serial_format(serial_t *obj,
int data_bits, SerialParity parity, int stop_bits)
{
(void)obj;
if (data_bits != 8) {
error("UART supports only 8 data bits.\r\n");
}
if (stop_bits != 1) {
error("UART supports only 1 stop bits.\r\n");
}
if (parity == ParityNone) {
UART_CB.parity = NRF_UART_PARITY_EXCLUDED;
} else if (parity == ParityEven) {
UART_CB.parity = NRF_UART_PARITY_INCLUDED;
} else {
error("UART supports only even parity.\r\n");
}
// Reconfigure UART peripheral.
nrf_uart_configure(UART_INSTANCE, UART_CB.parity, UART_CB.hwfc);
}
void serial_irq_handler(serial_t *obj, uart_irq_handler handler, uint32_t id)
{
(void)obj;
UART_CB.irq_handler = handler;
UART_CB.irq_context = id;
}
void serial_irq_set(serial_t *obj, SerialIrq irq, uint32_t enable)
{
(void)obj;
if (enable) {
switch (irq) {
case RxIrq:
#if DEVICE_SERIAL_ASYNCH
UART_CB.irq_enabled |= UART_IRQ_RX;
#endif
nrf_uart_int_enable(UART_INSTANCE, NRF_UART_INT_MASK_RXDRDY);
break;
case TxIrq:
#if DEVICE_SERIAL_ASYNCH
UART_CB.irq_enabled |= UART_IRQ_TX;
#endif
nrf_uart_int_enable(UART_INSTANCE, NRF_UART_INT_MASK_TXDRDY);
break;
}
} else {
switch (irq) {
case RxIrq:
#if DEVICE_SERIAL_ASYNCH
UART_CB.irq_enabled &= ~UART_IRQ_RX;
if (!UART_CB.rx_active)
#endif
{
nrf_uart_int_disable(UART_INSTANCE,
NRF_UART_INT_MASK_RXDRDY);
}
break;
case TxIrq:
#if DEVICE_SERIAL_ASYNCH
UART_CB.irq_enabled &= ~UART_IRQ_TX;
if (!UART_CB.tx_active)
#endif
{
nrf_uart_int_disable(UART_INSTANCE,
NRF_UART_INT_MASK_TXDRDY);
}
break;
}
}
}
int serial_getc(serial_t *obj)
{
while (!serial_readable(obj)) {
}
nrf_uart_event_clear(UART_INSTANCE, NRF_UART_EVENT_RXDRDY);
return nrf_uart_rxd_get(UART_INSTANCE);
}
void serial_putc(serial_t *obj, int c)
{
while (!serial_writable(obj)) {
}
nrf_uart_event_clear(UART_INSTANCE, NRF_UART_EVENT_TXDRDY);
nrf_uart_txd_set(UART_INSTANCE, (uint8_t)c);
}
int serial_readable(serial_t *obj)
{
(void)obj;
#if DEVICE_SERIAL_ASYNCH
if (UART_CB.rx_active) {
return 0;
}
#endif
return (nrf_uart_event_check(UART_INSTANCE, NRF_UART_EVENT_RXDRDY));
}
int serial_writable(serial_t *obj)
{
(void)obj;
#if DEVICE_SERIAL_ASYNCH
if (UART_CB.tx_active) {
return 0;
}
#endif
return (nrf_uart_event_check(UART_INSTANCE, NRF_UART_EVENT_TXDRDY));
}
void serial_break_set(serial_t *obj)
{
(void)obj;
nrf_uart_task_trigger(UART_INSTANCE, NRF_UART_TASK_SUSPEND);
nrf_uart_txrx_pins_disconnect(UART_INSTANCE);
nrf_gpio_pin_clear(UART_CB.pseltxd);
}
void serial_break_clear(serial_t *obj)
{
(void)obj;
nrf_gpio_pin_set(UART_CB.pseltxd);
nrf_uart_txrx_pins_set(UART_INSTANCE, UART_CB.pseltxd, UART_CB.pselrxd);
nrf_uart_task_trigger(UART_INSTANCE, NRF_UART_TASK_STARTRX);
nrf_uart_task_trigger(UART_INSTANCE, NRF_UART_TASK_STARTTX);
}
static void internal_set_hwfc(FlowControl type,
PinName rxflow, PinName txflow)
{
UART_CB.pselrts =
((rxflow == NC) || (type == FlowControlCTS)) ? NRF_UART_PSEL_DISCONNECTED : (uint32_t)rxflow;
UART_CB.pselcts =
((txflow == NC) || (type == FlowControlRTS)) ? NRF_UART_PSEL_DISCONNECTED : (uint32_t)txflow;
if (UART_CB.pselrts != NRF_UART_PSEL_DISCONNECTED) {
nrf_gpio_pin_set(UART_CB.pselrts);
nrf_gpio_cfg_output(UART_CB.pselrts);
}
if (UART_CB.pselcts != NRF_UART_PSEL_DISCONNECTED) {
nrf_gpio_cfg_input(UART_CB.pselcts, NRF_GPIO_PIN_NOPULL);
}
UART_CB.hwfc = (type == FlowControlNone)? NRF_UART_HWFC_DISABLED : UART0_CONFIG_HWFC;
nrf_uart_configure(UART_INSTANCE, UART_CB.parity, UART_CB.hwfc);
nrf_uart_hwfc_pins_set(UART_INSTANCE, UART_CB.pselrts, UART_CB.pselcts);
}
void serial_set_flow_control(serial_t *obj, FlowControl type,
PinName rxflow, PinName txflow)
{
(void)obj;
nrf_uart_disable(UART_INSTANCE);
internal_set_hwfc(type, rxflow, txflow);
nrf_uart_enable(UART_INSTANCE);
}
void serial_clear(serial_t *obj) {
(void)obj;
}
#if DEVICE_SERIAL_ASYNCH
int serial_tx_asynch(serial_t *obj, const void *tx, size_t tx_length,
uint8_t tx_width, uint32_t handler, uint32_t event,
DMAUsage hint)
{
(void)obj;
(void)tx_width;
(void)hint;
if (UART_CB.tx_active || !tx_length) {
return 0;
}
UART_CB.tx_buffer = tx;
UART_CB.tx_length = tx_length;
UART_CB.tx_pos = 0;
UART_CB.tx_asynch_handler = (void(*)())handler;
UART_CB.events_wanted &= ~SERIAL_EVENT_TX_ALL;
UART_CB.events_wanted |= event;
UART_CB.tx_active = true;
nrf_uart_int_enable(UART_INSTANCE, NRF_UART_INT_MASK_TXDRDY);
return 0;
}
void serial_rx_asynch(serial_t *obj, void *rx, size_t rx_length,
uint8_t rx_width, uint32_t handler, uint32_t event,
uint8_t char_match, DMAUsage hint)
{
(void)obj;
(void)rx_width;
(void)hint;
if (UART_CB.rx_active || !rx_length) {
return;
}
UART_CB.rx_buffer = rx;
UART_CB.rx_length = rx_length;
UART_CB.rx_pos = 0;
UART_CB.rx_asynch_handler = (void(*)())handler;
UART_CB.events_wanted &= ~SERIAL_EVENT_RX_ALL;
UART_CB.events_wanted |= event;
UART_CB.char_match = char_match;
UART_CB.rx_active = true;
nrf_uart_int_enable(UART_INSTANCE, NRF_UART_INT_MASK_RXDRDY);
}
uint8_t serial_tx_active(serial_t *obj)
{
(void)obj;
return UART_CB.tx_active;
}
uint8_t serial_rx_active(serial_t *obj)
{
(void)obj;
return UART_CB.rx_active;
}
int serial_irq_handler_asynch(serial_t *obj)
{
(void)obj;
uint32_t events_to_report = UART_CB.events_wanted & UART_CB.events_occured;
UART_CB.events_occured &= (~events_to_report);
return events_to_report;
}
void serial_tx_abort_asynch(serial_t *obj)
{
(void)obj;
end_asynch_tx();
UART_CB.tx_asynch_handler = NULL;
}
void serial_rx_abort_asynch(serial_t *obj)
{
(void)obj;
end_asynch_rx();
UART_CB.rx_asynch_handler = NULL;
}
#endif // DEVICE_SERIAL_ASYNCH
#endif // DEVICE_SERIAL
Reference in New Issue View Git Blame Copy Permalink