ARMmbed
/
mbed-os
mirror of https://github.com/ARMmbed/mbed-os.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
mbed-os/targets/TARGET_Cypress/TARGET_PSOC6/serial_api.c

821 lines
25 KiB
C
Raw Blame History

/*
* mbed Microcontroller Library
* Copyright (c) 2017-2018 Future Electronics
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#if DEVICE_SERIAL
#include <string.h>
#include "cmsis.h"
#include "mbed_assert.h"
#include "mbed_error.h"
#include "PeripheralPins.h"
#include "pinmap.h"
#include "serial_api.h"
#include "psoc6_utils.h"
#include "drivers/peripheral/sysclk/cy_sysclk.h"
#include "drivers/peripheral/gpio/cy_gpio.h"
#include "drivers/peripheral/scb/cy_scb_uart.h"
#include "drivers/peripheral/sysint/cy_sysint.h"
#define UART_OVERSAMPLE 12
#define UART_DEFAULT_BAUDRATE 115200
#define NUM_SERIAL_PORTS 8
#define SERIAL_DEFAULT_IRQ_PRIORITY 3
typedef struct serial_s serial_obj_t;
#if DEVICE_SERIAL_ASYNCH
#define OBJ_P(in) (&(in->serial))
#else
#define OBJ_P(in) (in)
#endif
/*
* NOTE: Cypress PDL high level API implementation of USART doe not
* align well with Mbed interface for interrupt-driven serial I/O.
* For this reason only low level PDL API is used here.
*/
static const cy_stc_scb_uart_config_t default_uart_config = {
.uartMode = CY_SCB_UART_STANDARD,
.enableMutliProcessorMode = false,
.smartCardRetryOnNack = false,
.irdaInvertRx = false,
.irdaEnableLowPowerReceiver = false,
.oversample = UART_OVERSAMPLE,
.enableMsbFirst = false,
.dataWidth = 8UL,
.parity = CY_SCB_UART_PARITY_NONE,
.stopBits = CY_SCB_UART_STOP_BITS_1,
.enableInputFilter = false,
.breakWidth = 11UL,
.dropOnFrameError = false,
.dropOnParityError = false,
.receiverAddress = 0x0UL,
.receiverAddressMask = 0x0UL,
.acceptAddrInFifo = false,
.enableCts = false,
.ctsPolarity = CY_SCB_UART_ACTIVE_LOW,
.rtsRxFifoLevel = 20UL,
.rtsPolarity = CY_SCB_UART_ACTIVE_LOW,
.rxFifoTriggerLevel = 0UL,
.rxFifoIntEnableMask = 0x0UL,
.txFifoTriggerLevel = 0UL,
.txFifoIntEnableMask = 0x0UL
};
int stdio_uart_inited = false;
serial_t stdio_uart;
typedef struct irq_info_s {
serial_obj_t *serial_obj;
uart_irq_handler handler;
uint32_t id_arg;
IRQn_Type irqn;
#if defined (TARGET_MCU_PSOC6_M0)
cy_en_intr_t cm0p_irq_src;
#endif
} irq_info_t;
static irq_info_t irq_info[NUM_SERIAL_PORTS] = {
{NULL, NULL, 0, unconnected_IRQn},
{NULL, NULL, 0, unconnected_IRQn},
{NULL, NULL, 0, unconnected_IRQn},
{NULL, NULL, 0, unconnected_IRQn},
{NULL, NULL, 0, unconnected_IRQn},
{NULL, NULL, 0, unconnected_IRQn},
{NULL, NULL, 0, unconnected_IRQn},
{NULL, NULL, 0, unconnected_IRQn}
};
static void serial_irq_dispatcher(uint32_t serial_id)
{
MBED_ASSERT(serial_id < NUM_SERIAL_PORTS);
irq_info_t *info = &irq_info[serial_id];
serial_obj_t *obj = info->serial_obj;
MBED_ASSERT(obj);
#if DEVICE_SERIAL_ASYNCH
if (obj->async_handler) {
obj->async_handler();
return;
}
#endif
if (Cy_SCB_GetRxInterruptStatusMasked(obj->base) & CY_SCB_RX_INTR_NOT_EMPTY) {
info->handler(info->id_arg, RxIrq);
Cy_SCB_ClearRxInterrupt(obj->base, CY_SCB_RX_INTR_NOT_EMPTY);
}
if (Cy_SCB_GetTxInterruptStatusMasked(obj->base) & (CY_SCB_TX_INTR_LEVEL | CY_SCB_UART_TX_DONE)) {
info->handler(info->id_arg, TxIrq);
}
}
static void serial_irq_dispatcher_uart0(void)
{
serial_irq_dispatcher(0);
}
static void serial_irq_dispatcher_uart1(void)
{
serial_irq_dispatcher(1);
}
static void serial_irq_dispatcher_uart2(void)
{
serial_irq_dispatcher(2);
}
static void serial_irq_dispatcher_uart3(void)
{
serial_irq_dispatcher(3);
}
static void serial_irq_dispatcher_uart4(void)
{
serial_irq_dispatcher(4);
}
static void serial_irq_dispatcher_uart5(void)
{
serial_irq_dispatcher(5);
}
void serial_irq_dispatcher_uart6(void)
{
serial_irq_dispatcher(6);
}
static void serial_irq_dispatcher_uart7(void)
{
serial_irq_dispatcher(7);
}
static void (*irq_dispatcher_table[])(void) = {
serial_irq_dispatcher_uart0,
serial_irq_dispatcher_uart1,
serial_irq_dispatcher_uart2,
serial_irq_dispatcher_uart3,
serial_irq_dispatcher_uart4,
serial_irq_dispatcher_uart5,
serial_irq_dispatcher_uart6,
serial_irq_dispatcher_uart7
};
static IRQn_Type serial_irq_allocate_channel(serial_obj_t *obj)
{
#if defined (TARGET_MCU_PSOC6_M0)
irq_info[obj->serial_id].cm0p_irq_src = scb_0_interrupt_IRQn + obj->serial_id;
return cy_m0_nvic_allocate_channel(CY_SERIAL_IRQN_ID + obj->serial_id);
#else
return (IRQn_Type)(scb_0_interrupt_IRQn + obj->serial_id);
#endif // M0
}
static void serial_irq_release_channel(IRQn_Type channel, uint32_t serial_id)
{
#if defined (TARGET_MCU_PSOC6_M0)
cy_m0_nvic_release_channel(channel, CY_SERIAL_IRQN_ID + serial_id);
#endif //M0
}
static int serial_irq_setup_channel(serial_obj_t *obj)
{
cy_stc_sysint_t irq_config;
irq_info_t *info = &irq_info[obj->serial_id];
if (info->irqn == unconnected_IRQn) {
IRQn_Type irqn = serial_irq_allocate_channel(obj);
if (irqn < 0) {
return (-1);
}
// Configure NVIC
irq_config.intrPriority = SERIAL_DEFAULT_IRQ_PRIORITY;
irq_config.intrSrc = irqn;
#if defined (TARGET_MCU_PSOC6_M0)
irq_config.cm0pSrc = info->cm0p_irq_src;
#endif
if (Cy_SysInt_Init(&irq_config, irq_dispatcher_table[obj->serial_id]) != CY_SYSINT_SUCCESS) {
return(-1);
}
info->irqn = irqn;
info->serial_obj = obj;
NVIC_EnableIRQ(irqn);
}
return 0;
}
/*
* Calculates fractional divider value.
*/
static uint32_t divider_value(uint32_t frequency, uint32_t frac_bits)
{
/* UARTs use peripheral clock */
return ((CY_CLK_PERICLK_FREQ_HZ * (1 << frac_bits)) + (frequency / 2)) / frequency;
}
static cy_en_sysclk_status_t serial_init_clock(serial_obj_t *obj, uint32_t baudrate)
{
cy_en_sysclk_status_t status = CY_SYSCLK_BAD_PARAM;
if (obj->div_num == CY_INVALID_DIVIDER) {
uint32_t divider_num = cy_clk_allocate_divider(CY_SYSCLK_DIV_16_5_BIT);
if (divider_num < PERI_DIV_16_5_NR) {
/* Assign fractional divider. */
status = Cy_SysClk_PeriphAssignDivider(obj->clock, CY_SYSCLK_DIV_16_5_BIT, divider_num);
if (status == CY_SYSCLK_SUCCESS) {
obj->div_type = CY_SYSCLK_DIV_16_5_BIT;
obj->div_num = divider_num;
}
} else {
// Try 16-bit divider.
divider_num = cy_clk_allocate_divider(CY_SYSCLK_DIV_16_BIT);
if (divider_num < PERI_DIV_16_NR) {
/* Assign 16-bit divider. */
status = Cy_SysClk_PeriphAssignDivider(obj->clock, CY_SYSCLK_DIV_16_BIT, divider_num);
if (status == CY_SYSCLK_SUCCESS) {
obj->div_type = CY_SYSCLK_DIV_16_BIT;
obj->div_num = divider_num;
}
} else {
error("Serial: cannot assign clock divider.");
}
}
} else {
status = CY_SYSCLK_SUCCESS;
}
if (status == CY_SYSCLK_SUCCESS) {
/* Set baud rate */
if (obj->div_type == CY_SYSCLK_DIV_16_5_BIT) {
Cy_SysClk_PeriphDisableDivider(CY_SYSCLK_DIV_16_5_BIT, obj->div_num);
uint32_t divider = divider_value(baudrate * UART_OVERSAMPLE, 5);
status = Cy_SysClk_PeriphSetFracDivider(CY_SYSCLK_DIV_16_5_BIT,
obj->div_num,
(divider >> 5) - 1, // integral part
divider & 0x1F); // fractional part
Cy_SysClk_PeriphEnableDivider(CY_SYSCLK_DIV_16_5_BIT, obj->div_num);
} else if (obj->div_type == CY_SYSCLK_DIV_16_BIT) {
Cy_SysClk_PeriphDisableDivider(CY_SYSCLK_DIV_16_BIT, obj->div_num);
status = Cy_SysClk_PeriphSetDivider(CY_SYSCLK_DIV_16_BIT,
obj->div_num,
divider_value(baudrate * UART_OVERSAMPLE, 0));
Cy_SysClk_PeriphEnableDivider(CY_SYSCLK_DIV_16_BIT, obj->div_num);
}
}
return status;
}
/*
* Initializes i/o pins for UART tx/rx.
*/
static void serial_init_pins(serial_obj_t *obj)
{
int tx_function = pinmap_function(obj->pin_tx, PinMap_UART_TX);
int rx_function = pinmap_function(obj->pin_rx, PinMap_UART_RX);
if (cy_reserve_io_pin(obj->pin_tx) || cy_reserve_io_pin(obj->pin_rx)) {
error("Serial TX/RX pin reservation conflict.");
}
pin_function(obj->pin_tx, tx_function);
pin_function(obj->pin_rx, rx_function);
}
/*
* Initializes i/o pins for UART flow control.
*/
static void serial_init_flow_pins(serial_obj_t *obj)
{
if (obj->pin_rts != NC) {
int rts_function = pinmap_function(obj->pin_rts, PinMap_UART_RTS);
if (cy_reserve_io_pin(obj->pin_rts)) {
error("Serial RTS pin reservation conflict.");
}
pin_function(obj->pin_rts, rts_function);
}
if (obj->pin_cts != NC) {
int cts_function = pinmap_function(obj->pin_cts, PinMap_UART_CTS);
if (cy_reserve_io_pin(obj->pin_cts)) {
error("Serial CTS pin reservation conflict.");
}
pin_function(obj->pin_cts, cts_function);
}
}
/*
* Initializes and enables UART/SCB.
*/
static void serial_init_peripheral(serial_obj_t *obj)
{
cy_stc_scb_uart_config_t uart_config = default_uart_config;
uart_config.dataWidth = obj->data_width;
uart_config.parity = obj->parity;
uart_config.stopBits = obj->stop_bits;
uart_config.enableCts = (obj->pin_cts != NC);
Cy_SCB_UART_Init(obj->base, &uart_config, NULL);
Cy_SCB_UART_Enable(obj->base);
}
#if DEVICE_SLEEP && DEVICE_LOWPOWERTIMER
static cy_en_syspm_status_t serial_pm_callback(cy_stc_syspm_callback_params_t *params)
{
serial_obj_t *obj = (serial_obj_t *)params->context;
cy_en_syspm_status_t status = CY_SYSPM_FAIL;
switch (params->mode) {
case CY_SYSPM_CHECK_READY:
/* If all data elements are transmitted from the TX FIFO and
* shifter and the RX FIFO is empty: the UART is ready to enter
* Deep Sleep mode.
*/
if (Cy_SCB_UART_IsTxComplete(obj->base)) {
if (0UL == Cy_SCB_UART_GetNumInRxFifo(obj->base)) {
/* Disable the UART. The transmitter stops driving the
* lines and the receiver stops receiving data until
* the UART is enabled.
* This happens when the device failed to enter Deep
* Sleep or it is awaken from Deep Sleep mode.
*/
Cy_SCB_UART_Disable(obj->base, NULL);
status = CY_SYSPM_SUCCESS;
}
}
break;
case CY_SYSPM_CHECK_FAIL:
/* Enable the UART to operate */
Cy_SCB_UART_Enable(obj->base);
status = CY_SYSPM_SUCCESS;
break;
case CY_SYSPM_BEFORE_TRANSITION:
status = CY_SYSPM_SUCCESS;
break;
case CY_SYSPM_AFTER_TRANSITION:
/* Enable the UART to operate */
Cy_SCB_UART_Enable(obj->base);
status = CY_SYSPM_SUCCESS;
break;
default:
break;
}
return status;
}
#endif // DEVICE_SLEEP && DEVICE_LOWPOWERTIMER
void serial_init(serial_t *obj_in, PinName tx, PinName rx)
{
serial_obj_t *obj = OBJ_P(obj_in);
bool is_stdio = (tx == CY_STDIO_UART_TX) || (rx == CY_STDIO_UART_RX);
if (is_stdio && stdio_uart_inited) {
memcpy(obj_in, &stdio_uart, sizeof(serial_t));
return;
}
{
uint32_t uart = pinmap_peripheral(tx, PinMap_UART_TX);
uart = pinmap_merge(uart, pinmap_peripheral(rx, PinMap_UART_RX));
if (uart != (uint32_t)NC) {
obj->base = (CySCB_Type*)uart;
obj->serial_id = ((UARTName)uart - UART_0) / (UART_1 - UART_0);
obj->pin_tx = tx;
obj->pin_rx = rx;
obj->clock = CY_PIN_CLOCK(pinmap_function(tx, PinMap_UART_TX));
obj->div_num = CY_INVALID_DIVIDER;
obj->data_width = 8;
obj->stop_bits = CY_SCB_UART_STOP_BITS_1;
obj->parity = CY_SCB_UART_PARITY_NONE;
obj->pin_rts = NC;
obj->pin_cts = NC;
serial_init_clock(obj, UART_DEFAULT_BAUDRATE);
serial_init_peripheral(obj);
//Cy_GPIO_Write(Cy_GPIO_PortToAddr(CY_PORT(P13_6)), CY_PIN(P13_6), 1);
serial_init_pins(obj);
//Cy_GPIO_Write(Cy_GPIO_PortToAddr(CY_PORT(P13_6)), CY_PIN(P13_6), 0);
#if DEVICE_SLEEP && DEVICE_LOWPOWERTIMER
obj->pm_callback_handler.callback = serial_pm_callback;
obj->pm_callback_handler.type = CY_SYSPM_DEEPSLEEP;
obj->pm_callback_handler.skipMode = 0;
obj->pm_callback_handler.callbackParams = &obj->pm_callback_params;
obj->pm_callback_params.base = obj->base;
obj->pm_callback_params.context = obj;
if (!Cy_SysPm_RegisterCallback(&obj->pm_callback_handler)) {
error("PM callback registration failed!");
}
#endif // DEVICE_SLEEP && DEVICE_LOWPOWERTIMER
if (is_stdio) {
memcpy(&stdio_uart, obj_in, sizeof(serial_t));
stdio_uart_inited = true;
}
} else {
error("Serial pinout mismatch. Requested pins Rx and Tx can't be used for the same Serial communication.");
}
}
}
void serial_baud(serial_t *obj_in, int baudrate)
{
serial_obj_t *obj = OBJ_P(obj_in);
Cy_SCB_UART_Disable(obj->base, NULL);
serial_init_clock(obj, baudrate);
Cy_SCB_UART_Enable(obj->base);
}
void serial_format(serial_t *obj_in, int data_bits, SerialParity parity, int stop_bits)
{
serial_obj_t *obj = OBJ_P(obj_in);
if ((data_bits >= 5) && (data_bits <= 9)) {
obj->data_width = data_bits;
}
switch (parity) {
case ParityNone:
obj->parity = CY_SCB_UART_PARITY_NONE;
break;
case ParityOdd:
obj->parity = CY_SCB_UART_PARITY_ODD;
break;
case ParityEven:
obj->parity = CY_SCB_UART_PARITY_EVEN;
break;
case ParityForced1:
case ParityForced0:
MBED_ASSERT("Serial parity mode not supported!");
break;
}
switch (stop_bits) {
case 1:
obj->stop_bits = CY_SCB_UART_STOP_BITS_1;
break;
case 2:
obj->stop_bits = CY_SCB_UART_STOP_BITS_2;
break;
case 3:
obj->stop_bits = CY_SCB_UART_STOP_BITS_3;
break;
case 4:
obj->stop_bits = CY_SCB_UART_STOP_BITS_4;
break;
}
Cy_SCB_UART_Disable(obj->base, NULL);
serial_init_peripheral(obj);
}
void serial_putc(serial_t *obj_in, int c)
{
serial_obj_t *obj = OBJ_P(obj_in);
while (!serial_writable(obj_in)) {
// empty
}
Cy_SCB_UART_Put(obj->base, c);
}
int serial_getc(serial_t *obj_in)
{
serial_obj_t *obj = OBJ_P(obj_in);
while (!serial_readable(obj_in)) {
// empty
}
return Cy_SCB_UART_Get(obj->base);
}
int serial_readable(serial_t *obj_in)
{
serial_obj_t *obj = OBJ_P(obj_in);
return Cy_SCB_GetNumInRxFifo(obj->base) != 0;
}
int serial_writable(serial_t *obj_in)
{
serial_obj_t *obj = OBJ_P(obj_in);
return Cy_SCB_GetNumInTxFifo(obj->base) != Cy_SCB_GetFifoSize(obj->base);
}
void serial_clear(serial_t *obj_in)
{
serial_obj_t *obj = OBJ_P(obj_in);
Cy_SCB_UART_Disable(obj->base, NULL);
Cy_SCB_ClearTxFifo(obj->base);
Cy_SCB_ClearRxFifo(obj->base);
serial_init_peripheral(obj);
}
void serial_break_set(serial_t *obj_in)
{
serial_obj_t *obj = OBJ_P(obj_in);
/* Cypress SCB does not support transmitting break directly.
* We emulate functionality by switching TX pin to GPIO mode.
*/
GPIO_PRT_Type *port_tx = Cy_GPIO_PortToAddr(CY_PORT(obj->pin_tx));
Cy_GPIO_Pin_FastInit(port_tx, CY_PIN(obj->pin_tx), CY_GPIO_DM_STRONG_IN_OFF, 0, HSIOM_SEL_GPIO);
Cy_GPIO_Write(port_tx, CY_PIN(obj->pin_tx), 0);
}
void serial_break_clear(serial_t *obj_in)
{
serial_obj_t *obj = OBJ_P(obj_in);
/* Connect TX pin back to SCB, see a comment in serial_break_set() above */
GPIO_PRT_Type *port_tx = Cy_GPIO_PortToAddr(CY_PORT(obj->pin_tx));
int tx_function = pinmap_function(obj->pin_tx, PinMap_UART_TX);
Cy_GPIO_Pin_FastInit(port_tx, CY_PIN(obj->pin_tx), CY_GPIO_DM_STRONG_IN_OFF, 0, CY_PIN_HSIOM(tx_function));
}
void serial_set_flow_control(serial_t *obj_in, FlowControl type, PinName rxflow, PinName txflow)
{
serial_obj_t *obj = OBJ_P(obj_in);
Cy_SCB_UART_Disable(obj->base, NULL);
switch (type) {
case FlowControlNone:
obj->pin_rts = NC;
obj->pin_cts = NC;
break;
case FlowControlRTS:
obj->pin_rts = rxflow;
obj->pin_cts = NC;
break;
case FlowControlCTS:
obj->pin_rts = NC;
obj->pin_cts = txflow;
break;
case FlowControlRTSCTS:
obj->pin_rts = rxflow;
obj->pin_cts = txflow;
break;
}
serial_init_peripheral(obj);
serial_init_flow_pins(obj);
}
#if DEVICE_SERIAL_ASYNCH
void serial_irq_handler(serial_t *obj_in, uart_irq_handler handler, uint32_t id)
{
serial_obj_t *obj = OBJ_P(obj_in);
irq_info_t *info = &irq_info[obj->serial_id];
if (info->irqn != unconnected_IRQn) {
NVIC_DisableIRQ(info->irqn);
}
info->handler = handler;
info->id_arg = id;
serial_irq_setup_channel(obj);
}
void serial_irq_set(serial_t *obj_in, SerialIrq irq, uint32_t enable)
{
serial_obj_t *obj = OBJ_P(obj_in);
switch (irq) {
case RxIrq:
if (enable) {
Cy_SCB_SetRxInterruptMask(obj->base, CY_SCB_RX_INTR_NOT_EMPTY);
} else {
Cy_SCB_SetRxInterruptMask(obj->base, 0);
}
break;
case TxIrq:
if (enable) {
Cy_SCB_SetTxInterruptMask(obj->base, CY_SCB_TX_INTR_LEVEL | CY_SCB_UART_TX_DONE);
} else {
Cy_SCB_SetTxInterruptMask(obj->base, 0);
}
break;
}
}
static void serial_finish_tx_asynch(serial_obj_t *obj)
{
Cy_SCB_SetTxInterruptMask(obj->base, 0);
obj->tx_pending = false;
}
static void serial_finish_rx_asynch(serial_obj_t *obj)
{
Cy_SCB_SetRxInterruptMask(obj->base, 0);
obj->rx_pending = false;
}
int serial_tx_asynch(serial_t *obj_in, const void *tx, size_t tx_length, uint8_t tx_width, uint32_t handler, uint32_t event, DMAUsage hint)
{
serial_obj_t *obj = OBJ_P(obj_in);
const uint8_t *p_buf = tx;
(void)tx_width; // Obsolete argument
(void)hint; // At the moment we do not support DAM transfers, so this parameter gets ignored.
if (obj->tx_pending) {
return 0;
}
obj->async_handler = (cy_israddress)handler;
if (serial_irq_setup_channel(obj) < 0) {
return 0;
}
// Write as much as possible into the FIFO first.
while ((tx_length > 0) && Cy_SCB_UART_Put(obj->base, *p_buf)) {
++p_buf;
--tx_length;
}
if (tx_length > 0) {
obj->tx_events = event;
obj_in->tx_buff.buffer = (void *)p_buf;
obj_in->tx_buff.length = tx_length;
obj_in->tx_buff.pos = 0;
obj->tx_pending = true;
// Enable interrupts to complete transmission.
Cy_SCB_SetRxInterruptMask(obj->base, CY_SCB_TX_INTR_LEVEL | CY_SCB_UART_TX_DONE);
} else {
// Enable interrupt to signal completing of the transmission.
Cy_SCB_SetRxInterruptMask(obj->base, CY_SCB_UART_TX_DONE);
}
return tx_length;
}
void serial_rx_asynch(serial_t *obj_in, void *rx, size_t rx_length, uint8_t rx_width, uint32_t handler, uint32_t event, uint8_t char_match, DMAUsage hint)
{
serial_obj_t *obj = OBJ_P(obj_in);
(void)rx_width; // Obsolete argument
(void)hint; // At the moment we do not support DAM transfers, so this parameter gets ignored.
if (obj->rx_pending || (rx_length == 0)) {
return;
}
obj_in->char_match = char_match;
obj_in->char_found = false;
obj->rx_events = event;
obj_in->rx_buff.buffer = rx;
obj_in->rx_buff.length = rx_length;
obj_in->rx_buff.pos = 0;
obj->async_handler = (cy_israddress)handler;
if (serial_irq_setup_channel(obj) < 0) {
return;
}
obj->rx_pending = true;
// Enable interrupts to start receiving.
Cy_SCB_SetRxInterruptMask(obj->base, CY_SCB_UART_RX_INTR_MASK & ~CY_SCB_RX_INTR_UART_BREAK_DETECT);
}
uint8_t serial_tx_active(serial_t *obj)
{
return obj->serial.tx_pending;
}
uint8_t serial_rx_active(serial_t *obj)
{
return obj->serial.rx_pending;
}
int serial_irq_handler_asynch(serial_t *obj_in)
{
uint32_t cur_events = 0;
uint32_t tx_status;
uint32_t rx_status;
serial_obj_t *obj = OBJ_P(obj_in);
rx_status = Cy_SCB_GetRxInterruptStatusMasked(obj->base);
tx_status = Cy_SCB_GetTxInterruptStatusMasked(obj->base);
if (tx_status & CY_SCB_TX_INTR_LEVEL) {
// FIFO has space available for more TX
uint8_t *ptr = obj_in->tx_buff.buffer;
ptr += obj_in->tx_buff.pos;
while ((obj_in->tx_buff.pos < obj_in->tx_buff.length) &&
Cy_SCB_UART_Put(obj->base, *ptr)) {
++ptr;
++(obj_in->tx_buff.pos);
}
if (obj_in->tx_buff.pos == obj_in->tx_buff.length) {
// No more bytes to follow; check to see if we need to signal completion.
if (obj->tx_events & SERIAL_EVENT_TX_COMPLETE) {
// Disable FIFO interrupt as there are no more bytes to follow.
Cy_SCB_SetRxInterruptMask(obj->base, CY_SCB_UART_TX_DONE);
} else {
// Nothing more to do, mark end of transmission.
serial_finish_tx_asynch(obj);
}
}
}
if (tx_status & CY_SCB_TX_INTR_UART_DONE) {
// Mark end of the transmission.
serial_finish_tx_asynch(obj);
cur_events |= SERIAL_EVENT_TX_COMPLETE & obj->tx_events;
}
Cy_SCB_ClearTxInterrupt(obj->base, tx_status);
if (rx_status & CY_SCB_RX_INTR_OVERFLOW) {
cur_events |= SERIAL_EVENT_RX_OVERRUN_ERROR & obj->rx_events;
}
if (rx_status & CY_SCB_RX_INTR_UART_FRAME_ERROR) {
cur_events |= SERIAL_EVENT_RX_FRAMING_ERROR & obj->rx_events;
}
if (rx_status & CY_SCB_RX_INTR_UART_PARITY_ERROR) {
cur_events |= SERIAL_EVENT_RX_PARITY_ERROR & obj->rx_events;
}
if (rx_status & CY_SCB_RX_INTR_LEVEL) {
uint8_t *ptr = obj_in->rx_buff.buffer;
ptr += obj_in->rx_buff.pos;
while (obj_in->rx_buff.pos < obj_in->rx_buff.length) {
uint32_t c = Cy_SCB_UART_Get(obj->base);
if (c == CY_SCB_UART_RX_NO_DATA) {
break;
}
*ptr++ = (uint8_t)c;
++(obj_in->rx_buff.pos);
// Check for character match condition.
if (obj_in->char_match != SERIAL_RESERVED_CHAR_MATCH) {
if (c == obj_in->char_match) {
obj_in->char_found = true;
cur_events |= SERIAL_EVENT_RX_CHARACTER_MATCH & obj->rx_events;
// Clamp RX.
obj_in->rx_buff.length = obj_in->rx_buff.pos;
break;
}
}
}
}
if (obj_in->rx_buff.pos == obj_in->rx_buff.length) {
serial_finish_rx_asynch(obj);
}
Cy_SCB_ClearRxInterrupt(obj->base, rx_status);
return cur_events;
}
void serial_tx_abort_asynch(serial_t *obj_in)
{
serial_obj_t *obj = OBJ_P(obj_in);
serial_finish_tx_asynch(obj);
Cy_SCB_UART_ClearTxFifo(obj->base);
}
void serial_rx_abort_asynch(serial_t *obj_in)
{
serial_obj_t *obj = OBJ_P(obj_in);
serial_finish_rx_asynch(obj);
Cy_SCB_UART_ClearRxFifo(obj->base);
}
#endif // DEVICE_SERIAL_ASYNCH
#endif // DEVICE_SERIAL
Reference in New Issue View Git Blame Copy Permalink