mbed-os/targets/TARGET_NORDIC/TARGET_NRF5/port_api.c

109 lines
3.9 KiB
C

/*
* Copyright (c) 2013 Nordic Semiconductor ASA
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice, this list
* of conditions and the following disclaimer.
*
* 2. Redistributions in binary form, except as embedded into a Nordic Semiconductor ASA
* integrated circuit in a product or a software update for such product, must reproduce
* the above copyright notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the distribution.
*
* 3. Neither the name of Nordic Semiconductor ASA nor the names of its contributors may be
* used to endorse or promote products derived from this software without specific prior
* written permission.
*
* 4. This software, with or without modification, must only be used with a
* Nordic Semiconductor ASA integrated circuit.
*
* 5. Any software provided in binary or object form under this license must not be reverse
* engineered, decompiled, modified and/or disassembled.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
#include "port_api.h"
#include "pinmap.h"
#include "gpio_api.h"
PinName port_pin(PortName port, int pin_n)
{
(void) port;
return (PinName)(pin_n);
}
void port_init(port_t *obj, PortName port, int mask, PinDirection dir)
{
obj->port = port;
obj->mask = mask;
obj->reg_out = &NRF_GPIO->OUT;
obj->reg_in = &NRF_GPIO->IN;
obj->reg_cnf = NRF_GPIO->PIN_CNF;
port_dir(obj, dir);
}
void port_mode(port_t *obj, PinMode mode)
{
uint32_t i;
// The mode is set per pin: reuse pinmap logic
for (i = 0; i<31; i++) {
if (obj->mask & (1 << i)) {
pin_mode(port_pin(obj->port, i), mode);
}
}
}
void port_dir(port_t *obj, PinDirection dir)
{
int i;
switch (dir) {
case PIN_INPUT:
for (i = 0; i<31; i++) {
if (obj->mask & (1 << i)) {
obj->reg_cnf[i] = (GPIO_PIN_CNF_SENSE_Disabled << GPIO_PIN_CNF_SENSE_Pos)
| (GPIO_PIN_CNF_DRIVE_S0S1 << GPIO_PIN_CNF_DRIVE_Pos)
| (GPIO_PIN_CNF_INPUT_Connect << GPIO_PIN_CNF_INPUT_Pos)
| (GPIO_PIN_CNF_DIR_Input << GPIO_PIN_CNF_DIR_Pos);
}
}
break;
case PIN_OUTPUT:
for (i = 0; i<31; i++) {
if (obj->mask & (1 << i)) {
obj->reg_cnf[i] = (GPIO_PIN_CNF_SENSE_Disabled << GPIO_PIN_CNF_SENSE_Pos)
| (GPIO_PIN_CNF_DRIVE_S0S1 << GPIO_PIN_CNF_DRIVE_Pos)
| (GPIO_PIN_CNF_PULL_Disabled << GPIO_PIN_CNF_PULL_Pos)
| (GPIO_PIN_CNF_INPUT_Connect << GPIO_PIN_CNF_INPUT_Pos)
| (GPIO_PIN_CNF_DIR_Output << GPIO_PIN_CNF_DIR_Pos);
}
}
break;
}
}
void port_write(port_t *obj, int value)
{
*obj->reg_out = value;
}
int port_read(port_t *obj)
{
return (*obj->reg_in);
}