mbed-os/targets/TARGET_ARM_SSG/TARGET_IOTSS/PinNames.h

242 lines
5.0 KiB
C

/* mbed Microcontroller Library
* Copyright (c) 2006-2013 ARM Limited
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef MBED_PINNAMES_H
#define MBED_PINNAMES_H
#include "cmsis.h"
#ifdef __cplusplus
extern "C" {
#endif
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
#define PORT_SHIFT 5
typedef enum {
// MPS2 EXP Pin Names
EXP0 = 0 ,
EXP1 = 4 ,
EXP2 = 2 ,
EXP3 = 3 ,
EXP4 = 1 ,
EXP5 = 15,
EXP6 = 5 ,
EXP7 = 6 ,
EXP8 = 7 ,
EXP9 = 8 ,
EXP10 =9 ,
EXP11 =13,
EXP12 =10,
EXP13 =11,
EXP14 =12,
EXP15 =14,
EXP16 =18,
EXP17 =19,
EXP18 =20,
EXP19 =21,
EXP20 =52,
EXP21 =53,
EXP22 =54,
EXP23 =55,
EXP24 =56,
EXP25 =57,
EXP26 =16,
EXP27 =25,
EXP28 =24,
EXP29 =31,
EXP30 =17,
EXP31 =23,
EXP32 =27,
EXP33 =30,
EXP34 =26,
EXP35 =28,
EXP36 =29,
EXP37 =58,
EXP38 =48,
EXP39 =49,
EXP40 =50,
EXP41 =22,
EXP42 =59,
EXP43 =60,
EXP44 =51,
EXP45 =61,
EXP46 =62,
EXP47 =63,
EXP48 =64,
EXP49 =65,
EXP50 =66,
EXP51 =67,
// Other mbed Pin Names
//LEDs on mps2
//user leds
USERLED1 = 100,
USERLED2 = 101,
//user switches
USERSW1 = 110,
USERSW2 = 111,
//mcc leds
LED1 = 200,
LED2 = 201,
LED3 = 202,
LED4 = 203,
LED5 = 204,
LED6 = 205,
LED7 = 206,
LED8 = 207,
//MCC Switches
SW1 = 210,
SW2 = 211,
SW3 = 212,
SW4 = 213,
SW5 = 214,
SW6 = 215,
SW7 = 216,
SW8 = 217,
//MPS2 SPI header pins j21
MOSI_SPI = 300,
MISO_SPI = 301,
SCLK_SPI = 302,
SSEL_SPI = 303,
//MPS2 CLCD SPI
CLCD_MOSI = 304,
CLCD_MISO = 305,
CLCD_SCLK = 306,
CLCD_SSEL = 307,
CLCD_RESET = 308,
CLCD_RS = 309,
CLCD_RD = 310,
CLCD_BL_CTRL = 311,
//MPS2 shield 0 SPI
SHIELD_0_SPI_SCK = 320,
SHIELD_0_SPI_MOSI = 321,
SHIELD_0_SPI_MISO = 322,
SHIELD_0_SPI_nCS = 323,
//MPS2 shield 1 SPI
SHIELD_1_SPI_SCK = 331,
SHIELD_1_SPI_MOSI = 332,
SHIELD_1_SPI_MISO = 333,
SHIELD_1_SPI_nCS = 334,
//MPS2 shield ADC SPI
ADC_MOSI = 650,
ADC_MISO = 651,
ADC_SCLK = 652,
ADC_SSEL = 653,
//MPS2 Uart
USBTX = 400,
USBRX = 401,
XB_TX = 402,
XB_RX = 403,
SH0_TX = 404,
SH0_RX = 405,
SH1_TX = 406,
SH1_RX = 407,
//MPS2 I2C touchscreen and audio
TSC_SDA = 500,
TSC_SCL = 501,
AUD_SDA = 502,
AUD_SCL = 503,
//MPS2 I2C for shield
SHIELD_0_SDA = 504,
SHIELD_0_SCL = 505,
SHIELD_1_SDA = 506,
SHIELD_1_SCL = 507,
//MPS2 shield Analog pins
A0_0 = 600,
A0_1 = 601,
A0_2 = 602,
A0_3 = 603,
A0_4 = 604,
A0_5 = 605,
A1_0 = 606,
A1_1 = 607,
A1_2 = 608,
A1_3 = 609,
A1_4 = 610,
A1_5 = 611,
//MPS2 Shield Digital pins
D0_0 = EXP0,
D0_1 = EXP4,
D0_2 = EXP2,
D0_3 = EXP3,
D0_4 = EXP1,
D0_5 = EXP6,
D0_6 = EXP7,
D0_7 = EXP8,
D0_8 = EXP9,
D0_9 = EXP10,
D0_10 = EXP12,
D0_11 = EXP13,
D0_12 = EXP14,
D0_13 = EXP11,
D0_14 = EXP15,
D0_15 = EXP5,
D1_0 = EXP26,
D1_1 = EXP30,
D1_2 = EXP28,
D1_3 = EXP29,
D1_4 = EXP27,
D1_5 = EXP32,
D1_6 = EXP33,
D1_7 = EXP34,
D1_8 = EXP35,
D1_9 = EXP36,
D1_10 = EXP38,
D1_11 = EXP39,
D1_12 = EXP40,
D1_13 = EXP44,
D1_14 = EXP41,
D1_15 = EXP31,
// Not connected
NC = (int)0xFFFFFFFF,
} PinName;
typedef enum {
PullUp = 2,
PullDown = 1,
PullNone = 0,
Repeater = 3,
OpenDrain = 4,
PullDefault = PullDown
} PinMode;
#ifdef __cplusplus
}
#endif
#endif