mbed-os/targets/TARGET_ONSEMI/TARGET_NCS36510/i2c_ipc7208_map.h

88 lines
3.9 KiB
C

/**
******************************************************************************
* @file i2c_ipc7208_map.h
* @brief I2C IPC 7208 HW register map
* @internal
* @author ON Semiconductor
* $Rev: 3324 $
* $Date: 2015-03-27 17:00:28 +0530 (Fri, 27 Mar 2015) $
******************************************************************************
* Copyright 2016 Semiconductor Components Industries LLC (d/b/a “ON Semiconductor”).
* All rights reserved. This software and/or documentation is licensed by ON Semiconductor
* under limited terms and conditions. The terms and conditions pertaining to the software
* and/or documentation are available at http://www.onsemi.com/site/pdf/ONSEMI_T&C.pdf
* (“ON Semiconductor Standard Terms and Conditions of Sale, Section 8 Software”) and
* if applicable the software license agreement. Do not use this software and/or
* documentation unless you have carefully read and you agree to the limited terms and
* conditions. By using this software and/or documentation, you agree to the limited
* terms and conditions.
*
* THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
* OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
* ON SEMICONDUCTOR SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL,
* INCIDENTAL, OR CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
* @endinternal
*
* @ingroup i2c_ipc7208
*
* @details
* <p>
* I2C IPC 7208 HW register map description
* </p>
*
* <h1> Reference document(s) </h1>
* <p>
* <a href="../pdf/IPC7208_I2C_APB_DS_v1P3.pdf" target="_blank">
* IPC7208 APB I2C Master Design Specification v1.3 </a>
* </p>
*/
#if defined ( __CC_ARM )
#pragma anon_unions
#endif
#ifndef I2C_IPC7208_MAP_H_
#define I2C_IPC7208_MAP_H_
#include "architecture.h"
/** I2C HW Structure Overlay */
typedef struct {
union {
struct {
__IO uint32_t CMD_FIFO_EMPTY :1; /**< 1 = Command FIFO is empty , 0 = Command FIFO is empty */
__IO uint32_t RD_FIFO_NOT_EMPTY :1; /**< 0 = Read data is not ready , 1 = Read data is ready */
__IO uint32_t I2C_BUS_ERR :1; /**< 0 = No buss error occurred , 1 = buss error */
__IO uint32_t RD_FIFO_UFL :1; /**< 0 = Read data FIFO is not underflowed , 1 = Read data FIFO is underflowed */
__IO uint32_t CMD_FIFO_OFL :1;/**< 0 = Command FIFO is not overflowed 1 = Command FIFO is overflowed */
__IO uint32_t CMD_FIFO_FULL :1; /**< 0 = Command FIFO not full , 1 = Command FIFO full */
__IO uint32_t PAD :2; /**< Reserved . Always reads back 0. */
} BITS;
__IO uint32_t WORD;
} STATUS;
__IO uint32_t RD_FIFO_REG;/**< Data from the I2C Slave to be read by the processor. */
__IO uint32_t CMD_REG; /**< I2C Command Programming interface */
union {
struct {
__IO uint32_t CMD_FIFO_INT :1; /**< Command FIFO empty interrupt : 0 = disable , 1 = enable */
__IO uint32_t RD_FIFO_INT :1; /**< Read Data FIFO Not Empty Interrupt : 0 = disable , 1 = enable */
__IO uint32_t I2C_ERR_INT :1; /**< I2C Error Interrupt : 0 = disable , 1 = enable */
// __IO uint32_t PAD :4; /**< Reserved. Writes have no effect; Read as 0x00. */
} BITS;
__IO uint32_t WORD;
} IER;
union {
struct {
__IO uint32_t CD_VAL :5; /**< I2C APB Clock Divider Value (low 5 bits). */
__IO uint32_t I2C_APB_CD_EN :1; /**< 0 = I2C clock divider disable 1 = I2C clock divider enable */
__IO uint32_t I2C_CLK_SRC :1; /**< I2C clock source : 0 = external clock , 1 = APB clock */
__IO uint32_t I2C_MODULE_EN :1; /**< 0 = I2C disable , 1 = I2C enable */
} BITS;
__IO uint32_t WORD;
} CR;
__IO uint32_t PRE_SCALE_REG; /* I2C APB Clock Divider Value (upper 8 bits). */
} I2cIpc7208Reg_t, *I2cIpc7208Reg_pt;
#endif /* I2C_IPC7208_MAP_H_ */