Mahesh Mahadevan 3d8d65be6a Rapid-IoT: Add support for the KW41Z side of the platform ... Add support for the KW41Z side of the RapidIoT platform. This requires the latest DAPLink binary to be programmed on the RapidIoT platform, binary can be downloaded from the below link: https://armmbed.github.io/DAPLink/ Also, the KW41Z side on RapidIoT does not have a serial port connected to the Debug terminal. Therefore a SerialPassThrough program should be flashed and running on the K64F side of RapidIoT platform for the mbed tests to pass. Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>		2018-12-14 06:35:43 -06:00
..
TARGET_K66F	MCUXpresso: Ensure the RTC OSC is running at bootup on Kinetis platforms	2018-11-28 10:31:58 -06:00
TARGET_K82F	MCUXpresso: Ensure the RTC OSC is running at bootup on Kinetis platforms	2018-11-28 10:31:58 -06:00
TARGET_KL27Z	MCUXpresso: Ensure the RTC OSC is running at bootup on Kinetis platforms	2018-11-28 10:31:58 -06:00
TARGET_KL43Z	MCUXpresso: Ensure the RTC OSC is running at bootup on Kinetis platforms	2018-11-28 10:31:58 -06:00
TARGET_KL82Z	MCUXpresso: Ensure the RTC OSC is running at bootup on Kinetis platforms	2018-11-28 10:31:58 -06:00
TARGET_KW24D	MCUXpresso: Ensure the RTC OSC is running at bootup on Kinetis platforms	2018-11-28 10:31:58 -06:00
TARGET_KW41Z	Rapid-IoT: Add support for the KW41Z side of the platform	2018-12-14 06:35:43 -06:00
TARGET_MCU_K22F	MCUXpresso: Ensure the RTC OSC is running at bootup on Kinetis platforms	2018-11-28 10:31:58 -06:00
TARGET_MCU_K24F	MCUXpresso: Ensure the RTC OSC is running at bootup on Kinetis platforms	2018-11-28 10:31:58 -06:00
TARGET_MCU_K64F	MCUXpresso: Ensure the RTC OSC is running at bootup on Kinetis platforms	2018-11-28 10:31:58 -06:00
api	Merge pull request #8872 from NXPmicro/Fix_RTC_Startup	2018-12-03 13:41:56 +01:00
fsl_common.c	Correct Freescale + NXP compiler detection macros	2017-09-11 13:20:32 -05:00