mbed-os/targets/TARGET_STM/TARGET_STM32L1/TARGET_MTB_RAK811/PinNames.h

149 lines
3.8 KiB
C

/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2016, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#ifndef MBED_PINNAMES_H
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
PA_2 = 0x02,
PA_3 = 0x03,
PA_4 = 0x04,
PA_5 = 0x05,
PA_6 = 0x06,
PA_7 = 0x07,
PA_8 = 0x08,
PA_9 = 0x09,
PA_10 = 0x0A,
PA_11 = 0x0B,
PA_12 = 0x0C,
PA_13 = 0x0D,
PA_14 = 0x0E,
PA_15 = 0x0F,
PB_0 = 0x10,
PB_1 = 0x11,
PB_2 = 0x12, // not used
PB_3 = 0x13,
PB_4 = 0x14,
PB_5 = 0x15,
PB_6 = 0x16,
PB_7 = 0x17,
PB_8 = 0x18,
PB_9 = 0x19,
PB_10 = 0x1A,
PB_11 = 0x1B,
PB_12 = 0x1C,
PB_13 = 0x1D,
PB_14 = 0x1E,
PB_15 = 0x1F,
PC_13 = 0x2D,
PC_14 = 0x2E, // not used ?
PC_15 = 0x2F, // not used ?
PH_0 = 0x70,
PH_1 = 0x71, // not used ?
// ADC internal channels
ADC_TEMP = 0xF0,
ADC_VREF = 0xF1,
ADC1_0 = PB_14,
ADC1_1 = PB_15,
ADC1_2 = PB_12,
UARTn_RX = PA_10,
UARTn_TX = PA_9,
SPI_RF_MOSI = PA_7,
SPI_RF_MISO = PA_6,
SPI_RF_SCK = PA_5,
SPI_RF_CS = PB_0,
SPI_RF_RESET = PB_13,
DIO0 = PA_11,
DIO1 = PB_1,
DIO2 = PA_3,
DIO3 = PH_0,
DIO4 = PC_13,
//DIO5 = ,
ANT_CTX_PA = PA_4,
ANT_CRX_RX = PB_6,
ANT_CBT_HF = PB_7,
RF_TCXO_EN = PH_1,
SPI_MISO = PB_4,
SPI_MOSI = PB_5,
SPI_SCK = PB_3,
FLASH_CS = PA_15,
I2C_SCL = PB_8,
I2C_SDA = PB_0,
LCD_A0 = PA_8,
LCD_nCS = PA_1,
LCD_nRESET = PA_2,
// Generic signals namings
LED1 = PA_12, // red
LED2 = PB_10, // blue
LED3 = PB_11, // green
USER_BUTTON = PA_0,
STDIO_UART_RX = PA_10,
STDIO_UART_TX = PA_9,
// aliases
POT = ADC1_2,
BUTTON1 = USER_BUTTON,
SERIAL_TX = STDIO_UART_TX,
SERIAL_RX = STDIO_UART_RX,
USBTX = STDIO_UART_TX,
USBRX = STDIO_UART_RX,
// Not connected
NC = (int)0xFFFFFFFF
} PinName;
#ifdef __cplusplus
}
#endif
#endif