mbed-os/targets/TARGET_STM/TARGET_STM32H7/i2c_device.h

74 lines
2.1 KiB
C

/* mbed Microcontroller Library
* SPDX-License-Identifier: BSD-3-Clause
******************************************************************************
*
* Copyright (c) 2015-2020 STMicroelectronics.
* All rights reserved.
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
#ifndef MBED_I2C_DEVICE_H
#define MBED_I2C_DEVICE_H
#include "cmsis.h"
#ifdef __cplusplus
extern "C" {
#endif
#if DEVICE_I2C
#define I2C_IP_VERSION_V2
#define I2C_IT_ALL (I2C_IT_ERRI|I2C_IT_TCI|I2C_IT_STOPI|I2C_IT_NACKI|I2C_IT_ADDRI|I2C_IT_RXI|I2C_IT_TXI)
/* Family specifc settings for clock source */
#define I2CAPI_I2C1_CLKSRC RCC_I2C1CLKSOURCE_D2PCLK1
#define I2CAPI_I2C2_CLKSRC RCC_I2C2CLKSOURCE_D2PCLK1
#define I2CAPI_I2C3_CLKSRC RCC_I2C3CLKSOURCE_D2PCLK1
#define I2CAPI_I2C4_CLKSRC RCC_I2C4CLKSOURCE_D3PCLK1
/* Provide the suitable timing depending on requested frequencie */
static inline uint32_t get_i2c_timing(int hz)
{
uint32_t tim = 0;
/*
Values calculated with I2C_Timing_Configuration tool (excel file)
* Standard mode (up to 100 kHz)
* Fast Mode (up to 400 kHz)
* Fast Mode Plus (up to 1 MHz)
Below values obtained with:
- I2Cx clock source = APB1CLK = 54 MHz
- Analog filter delay = ON
- Digital filter coefficient = 0
*/
switch (hz) {
case 100000:
tim = 0x10916998; // Standard mode with Rise time = 120ns, Fall time = 120ns
break;
case 400000:
tim = 0x00B11B54; // Fast Mode with Rise time = 120ns, Fall time = 120ns
break;
case 1000000:
tim = 0x0090091B; // Fast Mode Plus with Rise time = 120ns, Fall time = 10ns
break;
default:
break;
}
return tim;
}
#ifdef __cplusplus
}
#endif
#endif // DEVICE_I2C
#endif