/* * Copyright (c) 2018 ARM Limited. All rights reserved. * SPDX-License-Identifier: Apache-2.0 * Licensed under the Apache License, Version 2.0 (the License); you may * not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an AS IS BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ /* * The test is based on the assumption that trng will generate random data, random so * there will not be any similar patterns in it, that kind of data will be impossible to * compress, if compression will occur the test will result in failure. * * The test is composed out of three parts: * the first, generate a trng buffer and try to compress it, at the end of first part * we will reset the device. * In second part we will generate a trng buffer with a different buffer size and try to * compress it. * In the third part we will again generate a trng buffer to see that the same trng output * is not generated as the stored trng buffer from part one (before reseting), the new trng data will * be concatenated to the trng data from the first part and then try to compress it * together, if there are similar patterns the compression will succeed. * * We need to store and load the first part data before and after reset, the mechanism * we will use is the mbed greentea platform for sending and receving the data from the device * to the host running the test and back, the problem with this mechanism is that it doesn't * handle well certain characters, especially non ASCII ones, so we use the base64 algorithm * to ensure all characters will be transmitted correctly. */ #include "greentea-client/test_env.h" #include "unity/unity.h" #include "utest/utest.h" #include "hal/trng_api.h" #include "base64b.h" #include "pithy.h" #include #if !DEVICE_TRNG #error [NOT_SUPPORTED] TRNG API not supported for this target #endif #define MSG_VALUE_DUMMY "0" #define MSG_VALUE_LEN 64 #define MSG_KEY_LEN 32 #define BUFFER_LEN (MSG_VALUE_LEN/2) #define MSG_TRNG_READY "ready" #define MSG_TRNG_BUFFER "buffer" #define MSG_TRNG_EXIT "exit" #define MSG_TRNG_TEST_STEP1 "check_step1" #define MSG_TRNG_TEST_STEP2 "check_step2" #define MSG_TRNG_TEST_SUITE_ENDED "Test_suite_ended" #define RESULT_SUCCESS 0 using namespace utest::v1; static int fill_buffer_trng(uint8_t *buffer, trng_t *trng_obj, size_t trng_len) { size_t temp_size = 0, output_length = 0; int trng_res = 0; uint8_t *temp_in_buf = buffer; trng_init(trng_obj); memset(buffer, 0, BUFFER_LEN); while (true) { trng_res = trng_get_bytes(trng_obj, temp_in_buf, trng_len - temp_size, &output_length); TEST_ASSERT_EQUAL_INT_MESSAGE(0, trng_res, "trng_get_bytes error!"); temp_size += output_length; temp_in_buf += output_length; if (temp_size >= trng_len) { break; } } temp_in_buf = NULL; trng_free(trng_obj); return 0; } void print_array(uint8_t *buffer, size_t size) { for (size_t i = 0; i < size; i++) { utest_printf("%02x", buffer[i]); } utest_printf("\n"); } static void compress_and_compare(char *key, char *value) { trng_t trng_obj; uint8_t *out_comp_buf, *buffer; uint8_t *input_buf, *temp_buf; size_t comp_sz = 0; unsigned int result = 0; #define OUT_COMP_BUF_SIZE ((BUFFER_LEN * 5) + 32) #define TEMP_BUF_SIZE (BUFFER_LEN * 2) out_comp_buf = new uint8_t[OUT_COMP_BUF_SIZE]; buffer = new uint8_t[BUFFER_LEN]; temp_buf = new uint8_t[BUFFER_LEN * 2]; input_buf = new uint8_t[BUFFER_LEN * 4]; /*At the begining of step 2 load trng buffer from step 1*/ if (strcmp(key, MSG_TRNG_TEST_STEP2) == 0) { /*Using base64 to decode data sent from host*/ uint32_t lengthWritten = 0; uint32_t charsProcessed = 0; result = trng_DecodeNBase64((const char *)value, MSG_VALUE_LEN, buffer, BUFFER_LEN, &lengthWritten, &charsProcessed); TEST_ASSERT_EQUAL(0, result); memcpy(input_buf, buffer, BUFFER_LEN); } if (strcmp(key, MSG_TRNG_TEST_STEP1) == 0) { /*Fill buffer with trng values*/ result = fill_buffer_trng(buffer, &trng_obj, BUFFER_LEN); TEST_ASSERT_EQUAL(0, result); memcpy(input_buf, buffer, BUFFER_LEN); } /*pithy_Compress will try to compress the random data, if it succeeded it means the data is not really random*/ else if (strcmp(key, MSG_TRNG_TEST_STEP2) == 0) { comp_sz = pithy_Compress((char *)buffer, BUFFER_LEN, (char *)out_comp_buf, OUT_COMP_BUF_SIZE, 9); if (comp_sz <= BUFFER_LEN) { print_array(buffer, BUFFER_LEN); } TEST_ASSERT_MESSAGE(comp_sz > BUFFER_LEN, "TRNG_TEST_STEP1: trng_get_bytes was able to compress thus not random"); /*pithy_Compress will try to compress the random data with a different buffer size*/ result = fill_buffer_trng(temp_buf, &trng_obj, TEMP_BUF_SIZE); TEST_ASSERT_EQUAL(0, result); comp_sz = pithy_Compress((char *)temp_buf, TEMP_BUF_SIZE, (char *)out_comp_buf, OUT_COMP_BUF_SIZE, 9); if (comp_sz <= TEMP_BUF_SIZE) { print_array(temp_buf, TEMP_BUF_SIZE); } TEST_ASSERT_MESSAGE(comp_sz > TEMP_BUF_SIZE, "TRNG_TEST_STEP2: trng_get_bytes was able to compress thus not random"); memcpy(input_buf + BUFFER_LEN, temp_buf, TEMP_BUF_SIZE); /*pithy_Compress will try to compress the random data from before reset concatenated with new random data*/ comp_sz = pithy_Compress((char *)input_buf, TEMP_BUF_SIZE + BUFFER_LEN, (char *)out_comp_buf, OUT_COMP_BUF_SIZE, 9); if (comp_sz <= TEMP_BUF_SIZE + BUFFER_LEN) { print_array(input_buf, TEMP_BUF_SIZE + BUFFER_LEN); } TEST_ASSERT_MESSAGE(comp_sz > TEMP_BUF_SIZE + BUFFER_LEN, "TRNG_TEST_STEP3: concatenated buffer after reset was able to compress thus not random"); greentea_send_kv(MSG_TRNG_TEST_SUITE_ENDED, MSG_VALUE_DUMMY); } /*At the end of step 1 store trng buffer and reset the device*/ if (strcmp(key, MSG_TRNG_TEST_STEP1) == 0) { int result = 0; /*Using base64 to encode data sending from host*/ result = trng_EncodeBase64(buffer, BUFFER_LEN, (char *)out_comp_buf, OUT_COMP_BUF_SIZE); TEST_ASSERT_EQUAL(RESULT_SUCCESS, result); greentea_send_kv(MSG_TRNG_BUFFER, (const char *)out_comp_buf); } delete[] out_comp_buf; delete[] buffer; delete[] input_buf; delete[] temp_buf; } /*This method call first and second steps, it directs by the key received from the host*/ void trng_test() { greentea_send_kv(MSG_TRNG_READY, MSG_VALUE_DUMMY); char key[MSG_KEY_LEN + 1] = { }; char *value = new char[MSG_VALUE_LEN + 1]; do { memset(key, 0, MSG_KEY_LEN + 1); memset(value, 0, MSG_VALUE_LEN + 1); greentea_parse_kv(key, value, MSG_KEY_LEN, MSG_VALUE_LEN); if (strcmp(key, MSG_TRNG_TEST_STEP1) == 0) { /*create trng data buffer and try to compress it, store it for later checks*/ compress_and_compare(key, value); } if (strcmp(key, MSG_TRNG_TEST_STEP2) == 0) { /*create another trng data buffer and concatenate it to the stored trng data buffer try to compress them both*/ compress_and_compare(key, value); } } while (strcmp(key, MSG_TRNG_EXIT) != 0); delete[] value; } Case cases[] = { Case("TRNG: trng_test", trng_test), }; utest::v1::status_t greentea_test_setup(const size_t number_of_cases) { GREENTEA_SETUP(100, "trng_reset"); return greentea_test_setup_handler(number_of_cases); } Specification specification(greentea_test_setup, cases, greentea_test_teardown_handler); int main() { bool ret = !Harness::run(specification); return ret; }