/* * Copyright (c) 2018-2019, Arm Limited and affiliates. * SPDX-License-Identifier: Apache-2.0 * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #ifndef WS_COMMON_DEFINES_H_ #define WS_COMMON_DEFINES_H_ #define WH_IE_ELEMENT_HEADER_LENGTH 3 /* Header IE Sub elements */ #define WH_IE_UTT_TYPE 1 /**< Unicast Timing and Frame type information */ #define WH_IE_BT_TYPE 2 /**< Broadcast timing information */ #define WH_IE_FC_TYPE 3 /**< Flow Control for Extended Direct Frame Exchange */ #define WH_IE_RSL_TYPE 4 /**< Received Signal Level information */ #define WH_IE_MHDS_TYPE 5 /**< MHDS information for mesh routing */ #define WH_IE_VH_TYPE 6 /**< Vendor header information */ #define WH_IE_EA_TYPE 9 /**< Eapol Auhtenticator EUI-64 header information */ #define WS_WP_NESTED_IE 4 /**< WS nested Payload IE element'selement could include mltiple sub payload IE */ #define WS_WP_SUB_IE_ELEMENT_HEADER_LENGTH 2 /* Payload IE sub elements in side WS_WP_NESTED_IE */ #define WP_PAYLOAD_IE_US_TYPE 1 /**< Unicast Schedule information */ #define WP_PAYLOAD_IE_BS_TYPE 2 /**< Broadcast Schedule information */ #define WP_PAYLOAD_IE_VP_TYPE 3 /**< Vendor Payload information */ #define WP_PAYLOAD_IE_PAN_TYPE 4 /**< PAN Information */ #define WP_PAYLOAD_IE_NETNAME_TYPE 5 /**< Network Name information */ #define WP_PAYLOAD_IE_PAN_VER_TYPE 6 /**< Pan configuration version */ #define WP_PAYLOAD_IE_GTKHASH_TYPE 7 /**< GTK Hash information */ /* WS frame types to WH_IE_UTT_TYPE */ #define WS_FT_PAN_ADVERT 0 /**< PAN Advert */ #define WS_FT_PAN_ADVERT_SOL 1 /**< PAN Advert Solicit */ #define WS_FT_PAN_CONF 2 /**< PAN Config */ #define WS_FT_PAN_CONF_SOL 3 /**< PAN Config Solicit */ #define WS_FT_DATA 4 /**< data type inside MPX */ #define WS_FT_ACK 5 /**< Enhanced ACK */ #define WS_FT_EAPOL 6 /**< EAPOL message inside MPX */ /* WS exluded channel Control */ #define WS_EXC_CHAN_CTRL_NONE 0 /**< No excluded channels */ #define WS_EXC_CHAN_CTRL_RANGE 1 /**< Excluded channels are in 1 or multiple channel range */ #define WS_EXC_CHAN_CTRL_BITMASK 2 /**< Excluded channels are marked to bitmask which length based on configured channels */ #define WS_EXCLUDED_MAX_RANGE_TO_SEND 3 /** * @brief ws_pan_information_t PAN information */ typedef struct ws_pan_information_s { uint16_t pan_size; /**< Number devices connected to Border Router. */ uint16_t routing_cost; /**< ETX to border Router. */ uint16_t pan_version; /**< Pan configuration version will be updatd by Border router at PAN. */ bool use_parent_bs: 1; /**< 1 for force to follow parent broadcast schedule. 0 node may define own schedule. */ bool rpl_routing_method: 1; /**< 1 when RPL routing is selected and 0 when L2 routing. */ bool pan_version_set: 1; /**< 1 PAN version is set. */ unsigned version: 3; /**< Pan version support. */ } ws_pan_information_t; /** * @brief ws_excluded_channel_range_data_t Excludd Chanel range information */ typedef struct ws_excluded_channel_range_data_s { uint16_t range_start; uint16_t range_end; } ws_excluded_channel_range_data_t; /** * @brief ws_excluded_channel_data_t Excludd Chanel information */ typedef struct ws_excluded_channel_data_s { unsigned excuded_channel_ctrl: 2; unsigned excluded_range_length: 3; ws_excluded_channel_range_data_t exluded_range[WS_EXCLUDED_MAX_RANGE_TO_SEND]; uint16_t excluded_channel_count; uint8_t channel_mask_bytes_inline; uint32_t channel_mask[8]; } ws_excluded_channel_data_t; /** * @brief ws_hopping_schedule_t Chanel hopping schedule information */ typedef struct ws_hopping_schedule_s { uint8_t fhss_uc_dwell_interval; uint8_t fhss_bc_dwell_interval; uint8_t regulatory_domain; /**< PHY regulatory domain default to "KR" 0x09 */ uint8_t operating_class; /**< PHY operating class default to 1 */ uint8_t operating_mode; /**< PHY operating mode default to "1b" symbol rate 50, modulation index 1 */ uint8_t channel_plan; /**< 0: use regulatory domain values 1: application defined plan */ uint8_t uc_channel_function; /**< 0: Fixed channel, 1:TR51CF, 2: Direct Hash, 3: Vendor defined */ uint8_t bc_channel_function; /**< 0: Fixed channel, 1:TR51CF, 2: Direct Hash, 3: Vendor defined */ uint8_t channel_spacing; /**< derived from regulatory domain. 0:200k, 1:400k, 2:600k, 3:100k */ uint8_t number_of_channels; /**< derived from regulatory domain */ uint8_t clock_drift; uint8_t timing_accurancy; uint16_t uc_fixed_channel; uint16_t bc_fixed_channel; uint16_t fhss_bsi; uint32_t fhss_broadcast_interval; uint_fast24_t ch0_freq; // Default should be derived from regulatory domain ws_excluded_channel_data_t excluded_channels; } ws_hopping_schedule_t; /** * @brief ws_utt_ie_t WS UTT-IE */ typedef struct ws_utt_ie { uint8_t message_type; uint_fast24_t ufsi; } ws_utt_ie_t; /** * @brief ws_bt_ie_t WS BT-IE read */ typedef struct ws_bt_ie { uint16_t broadcast_slot_number; uint_fast24_t broadcast_interval_offset; } ws_bt_ie_t; /** * @brief ws_fc_ie_t WS FC-IE element */ typedef struct ws_fc_ie { uint8_t tx_flow_ctrl; uint8_t rx_flow_ctrl; } ws_fc_ie_t; /** * @brief ws_channel_plan_zero_t WS channel plan 0 define domain and class */ typedef struct ws_channel_plan_zero { uint8_t regulator_domain; uint8_t operation_class; } ws_channel_plan_zero_t; /** * @brief ws_channel_plan_one_t WS channel plan 1 define ch0, spasing and channel count */ typedef struct ws_channel_plan_one { uint_fast24_t ch0; unsigned channel_spacing: 4; uint16_t number_of_channel; } ws_channel_plan_one_t; /** * @brief ws_channel_function_zero_t WS function 0 fixed channel */ typedef struct ws_channel_function_zero { uint16_t fixed_channel; } ws_channel_function_zero_t; /** * @brief ws_channel_function_three_t WS function 3 vendor spesific channel hop */ typedef struct ws_channel_function_three { uint8_t channel_hop_count; uint8_t *channel_list; } ws_channel_function_three_t; /** * @brief ws_excluded_channel_range_t WS excluded channel range */ typedef struct ws_excluded_channel_range { uint8_t number_of_range; uint8_t *range_start; } ws_excluded_channel_range_t; /** * @brief ws_excluded_channel_mask_t WS excluded channel mask */ typedef struct ws_excluded_channel_mask { uint8_t *channel_mask; uint8_t mask_len_inline; } ws_excluded_channel_mask_t; /** * @brief ws_us_ie_t WS US-IE read */ typedef struct ws_us_ie { uint8_t dwell_interval; uint8_t clock_drift; uint8_t timing_accurancy; unsigned channel_plan: 3; unsigned channel_function: 3; unsigned excluded_channel_ctrl: 2; union { ws_channel_plan_zero_t zero; ws_channel_plan_one_t one; } plan; union { ws_channel_function_zero_t zero; ws_channel_function_three_t three; } function; union { ws_excluded_channel_range_t range; ws_excluded_channel_mask_t mask; } excluded_channels; } ws_us_ie_t; /** * @brief ws_bs_ie_t WS BS-IE read */ typedef struct ws_bs_ie { uint32_t broadcast_interval; uint16_t broadcast_schedule_identifier; uint8_t dwell_interval; uint8_t clock_drift; uint8_t timing_accurancy; unsigned channel_plan: 3; unsigned channel_function: 3; unsigned excluded_channel_ctrl: 2; union { ws_channel_plan_zero_t zero; ws_channel_plan_one_t one; } plan; union { ws_channel_function_zero_t zero; ws_channel_function_three_t three; } function; } ws_bs_ie_t; #define MPX_KEY_MANAGEMENT_ENC_USER_ID 0x0001 /**< MPX Key management user ID */ #define MPX_LOWPAN_ENC_USER_ID 0xA0ED /**< MPX Lowpan User Id */ #define WS_FAN_VERSION_1_0 1 #define WS_NEIGHBOR_LINK_TIMEOUT 2200 #define WS_NEIGHBOUR_TEMPORARY_NEIGH_MAX_LIFETIME 240 #define WS_NEIGHBOUR_TEMPORARY_ENTRY_LIFETIME 5 #define WS_NEIGHBOUR_DHCP_ENTRY_LIFETIME 60 #define WS_NEIGHBOR_TEMPORARY_LINK_MIN_TIMEOUT_LARGE 520 #define WS_NEIGHBOR_TEMPORARY_LINK_MIN_TIMEOUT_SMALL 260 #define WS_NEIGHBOR_NUD_TIMEOUT WS_NEIGHBOR_LINK_TIMEOUT / 2 #define WS_EAPOL_TEMPORARY_ENTRY_SMALL_TIMEOUT 330 #define WS_EAPOL_TEMPORARY_ENTRY_MEDIUM_TIMEOUT WS_EAPOL_TEMPORARY_ENTRY_SMALL_TIMEOUT #define WS_EAPOL_TEMPORARY_ENTRY_LARGE_TIMEOUT 750 #define WS_NEIGHBOR_ETX_SAMPLE_MAX 3 #define WS_NEIGHBOR_FIRST_ETX_SAMPLE_MIN_COUNT 3 //This can't be bigger than WS_NEIGHBOR_ETX_SAMPLE_MAX #define WS_PROBE_INIT_BASE_SECONDS 8 #define WS_NUD_RAND_PROBABILITY 1 #define WS_NUD_RANDOM_SAMPLE_LENGTH WS_NEIGHBOR_NUD_TIMEOUT / 2 #define WS_NUD_RANDOM_COMPARE (WS_NUD_RAND_PROBABILITY*WS_NUD_RANDOM_SAMPLE_LENGTH) / 100 #define WS_ETX_MIN_SAMPLE_COUNT 4 #define WS_ETX_MAX_UPDATE 1024 #define WS_ETX_MAX 1024 #define WS_ETX_MIN_WAIT_TIME 60 #define WS_RPL_PARENT_CANDIDATE_MAX 5 #define WS_RPL_SELECTED_PARENT_MAX 2 #define WS_CERTIFICATE_RPL_PARENT_CANDIDATE_MAX 8 #define WS_CERTIFICATE_RPL_SELECTED_PARENT_MAX 4 /** * Wi-sun spesific non-preferred prefix policy label */ #define WS_NON_PREFFRED_LABEL 36 /* * Threshold (referenced to DEVICE_MIN_SENS) above which a neighbor node may be considered for inclusion into candidate parent set */ #define CAND_PARENT_THRESHOLD 10 /* * Hysteresis factor to be applied to CAND_PARENT_THRESHOLD when admitting or dropping nodes from the candidate parent set. */ #define CAND_PARENT_HYSTERISIS 3 /* * value when send the first RPL DIS in 100ms ticks. Value is randomized between timeout/2 - timeout */ #define WS_RPL_DIS_INITIAL_TIMEOUT 600 /* * value when send subsequent RPL DIS in 100 ms tics. Value is randomized between timeout/2 - timeout */ #define WS_RPL_DIS_TIMEOUT 1800 /* * MAC Ack wait duration in symbols. 2-FSK modulation used -> 1 bit per symbol. */ #define WS_ACK_WAIT_SYMBOLS 800 /* * Tack max time in milliseconds. */ #define WS_TACK_MAX_MS 5 /* WS requires at least 19 MAC retransmissions (total 1+19=20 attempts). Default 802.15.4 macMaxFrameRetries is 3 (total 1+3=4 attempts). * At least 4 channel retries must be used: (Initial channel + WS_NUMBER_OF_CHANNEL_RETRIES) * MAC attempts = (1+4)*4=20 attempts * * Valid settings could be for example: * WS_MAX_FRAME_RETRIES WS_NUMBER_OF_CHANNEL_RETRIES Total attempts * 0 19 1+0*1+19=20 * 1 9 1+1*1+9=20 * 2 6 1+2*1+6=21 * 3 4 1+3*1+4=20 * */ #define WS_MAX_FRAME_RETRIES 3 #define WS_NUMBER_OF_CHANNEL_RETRIES 4 #if (1 + WS_MAX_FRAME_RETRIES) * (1 + WS_NUMBER_OF_CHANNEL_RETRIES) < 20 #warning "MAX frame retries set too low" #endif /* * Automatic CCA threshold: default threshold and range in dBm. */ #define CCA_DEFAULT_DBM -60 #define CCA_HIGH_LIMIT -60 #define CCA_LOW_LIMIT -100 /* * Config new version consistent filter period in 100ms periods */ #define WS_CONFIG_CONSISTENT_FILTER_PERIOD 100 // With FHSS we need to check CCA twice on TX channel #define WS_NUMBER_OF_CSMA_PERIODS 2 // Interval between two CCA checks #define WS_CSMA_MULTI_CCA_INTERVAL 2000 /* Default FHSS timing information * */ #define WS_FHSS_UC_DWELL_INTERVAL 255; #define WS_FHSS_BC_INTERVAL 1020; #define WS_FHSS_BC_DWELL_INTERVAL 255; /* * EAPOL relay and PAE authenticator socket settings */ #define EAPOL_RELAY_SOCKET_PORT 10253 #define BR_EAPOL_RELAY_SOCKET_PORT 10255 #define PAE_AUTH_SOCKET_PORT 10254 #endif /* WS_COMMON_DEFINES_H_ */